Used Bending Flange for sale (4,745)

Year of construction: 2010, operating hours: 196 h, condition: excellent (used), functionality: limited functionality, bending cheek thickness: 100 mm, additional equipment features: Separate Bending Arm Available, bending radius (min.): 700 mm, The Machine is VERY Sparingly used, Exactly used for bending 196 Bends. Available in Dismantled Condition in Southern Part Of INDIA, for a Very Attractive Price . Bljdpfxjzc Uu He Aktjp

Condition: used, Year of construction: 2001, functionality: fully functional, Profile Bending Machine SAF Curvatrici (TUWI) DS 60 HV – Top Condition & Huge Tool Package Description: For sale is a high-quality profile bending machine, type SAF Curvatrici (TUWI) DS 60 HV, from the first owner. The machine was purchased new by us in 2001 and has been in our possession ever since. It is fully operational and can be demonstrated under power after prior consultation. Special highlight – Modernized control system (08/2019): The control system was completely overhauled and modernized by a specialist company in August 2019. Now, 10 different feed sequences can be programmed. After a programmed value is reached, the next value is automatically approached by pressing the button again (value input in ascending order). Technical data & equipment: • Shaft diameter: 50 mm (for all three axes) Bjdpfx Ajz Ix Ukektelp • Acceptance height: 115 mm • Additional equipment from factory: 2 RCD correction rollers for bending angle iron (R/L). The original, lateral and height-adjustable shafts (38 x 250 mm) are also included. • Special modification for transport: Specially manufactured base frame for transport including four height-adjustable support plates. • Additional device for angle iron: A 10 mm thick plate was mounted on the top side. An additional hydraulic cylinder can be attached here, which pushes the vertical flange extremely close to 90° during bending (adjustable pressure depending on the angle). Note: The cylinder is not included in the standard price, but can be requested separately. Enormous scope of supply (Extremely many tools included!): The biggest advantage of this offer is the extremely extensive tool package, which is completely included in the price: • Standard tools: Complete set according to the machine’s scope of supply • 18 different roller sets: According to the list from Ø 8 mm to Ø 33.7 mm • Special tools for angle iron (according to the list) • Special tools for flat steel (light & heavy axis) • Special tools for square and rectangular tubes • Special tools for diagonal square material • Documentation: Original operating manual is fully available Note: The machine will only be sold as a complete package together with the complete tool set according to the attached list. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The disassembly, loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him. Technical specifications according to available documents. Subject to prior sale.

Condition: used, Year of construction: 1978, Equipment: documentation/manual, emergency stop, foot remote control, I am offering an electro-hydraulic profile bending machine, purchased in 2012, manufactured by Roundo AB, Sweden, type: R-7S (used, workshop-inspected, and partially refurbished with standard configuration, including vertically arranged bending axes, for sale. It is fully operational and can be demonstrated under power after prior consultation. - Control panel on the swivel arm with joysticks and switches - Digital displays for the two side rollers Significant added value: Extensive tool and profile package included! Bljdpfx Aksz Nhliotsp To be able to handle customer orders in an even more flexible and individual manner, significant investments have been made in expanding the range of tools. In addition to the standard tools, you will receive: • 36 additional rollers for a wide variety of profiles. • Special tool for flat and light-duty profiles up to a height of 500 mm. • Tools for square and rectangular tubes. • Tools for various round tubes Ø (88.9 + 114.3 + 139.7 + 168.3) mm. This machine is designed according to the latest findings in the tube and profile processing industry (as of 2012). The fixed bending roller is equipped with an adjustable slip clutch, which automatically adjusts the speed of the bending roller to the workpiece being bent. The three bending axes are mounted on oscillating roller bearings. A set of complete universal bending rollers for bending angle and T-sections with flange facing inwards and outwards, flat sections upright and lying flat, and square material. The rollers are made of wear-resistant and hardened steel. They consist of three adjustable rings, allowing various profiles to be rolled. Two independently adjustable guide rollers, which can be adjusted fully hydraulically on three different axes. The guide roller unit is equipped with small, interchangeable rollers. This allows asymmetric profiles to be held flat. This is especially necessary for angle sections with the flange facing inwards. Maximum pressure valve to prevent machine overload. Thermal overload protection for both electric motors. Main switch, emergency stop switch, 24 V transformer, equipment according to UVV standards. Multi-button switch mounted on the swivel arm for operating the machine. A set of keys and tools including operating manual in German. In practice, it has been shown that the quality of bending angle steel with the existing standard roller sets leads to limited results. Extensive investment! In recent years, important core components of the hydraulic system have been professionally renewed. The execution of the work is fully documented with existing invoices: • 2021: All hydraulic hoses were completely replaced. • 2022: As part of an oil leak repair, a brand new Bauer hydraulic motor was installed. The total cost for the motor including professional installation amounted to approximately €21,000 net. • Proof is available for the hydraulic motor: Test Certificate for Hydraulic Motors, Certificate of Conformity, Manufacture Certificate, and invoices. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The dismantling, loading and collection must be organized and carried out by the buyer himself or by a freight forwarder commissioned by him. • Technical specifications according to existing documents. Subject to prior sale.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Complete P20 & P30 HVAC Duct Flange Profile Roll Forming Lines with Butyl Sealant System For sale is a complete set of two professional roll forming lines for the production of P20 and P30 flange profiles, used in the manufacturing of rectangular HVAC ducts and fittings. The set includes: - P20 flange profile production line - P30 flange profile production line Both machines are equipped with an integrated butyl sealant application system. Depending on production requirements, the profiles can be manufactured with or without factory-applied butyl sealant. This provides full flexibility and allows the finished profiles to be adapted to different duct manufacturing technologies and customer requirements. The machines perform the complete production process – from coil decoiling, through multi-stage roll forming, to automatic cutting of the finished profile to the required length. Technical highlights Bedpfx Akozx Rz Hotelp - 18 roll forming stations - Automatic PLC-controlled cutting system - Production speed up to 9 m/min without sealant application - Production speed up to 5 m/min with butyl sealant application - Integrated butyl sealant application system - Complete production lines for P20 and P30 profiles Both machines are in very good technical condition. Since new, they have been used exclusively for the production needs of our own HVAC duct manufacturing facility. They have not been used for continuous mass production of profiles for commercial sale, therefore their overall level of utilisation is relatively low. Both production lines are fully operational, properly adjusted, tested and ready for immediate production. The machines are offered as a complete P20 + P30 set, allowing the buyer to establish in-house production of the two main flange profile sizes commonly used in the manufacturing of rectangular HVAC ducts and fittings. Relocation and commissioning support We can provide technical assistance with dismantling and relocation of the machines. We can also support the buyer with installation, adjustment, testing and commissioning at the new production facility, helping to ensure that both lines are properly set up and ready for production after relocation. The machines can be inspected while in operation, and production tests can be carried out prior to purchase. The indicated price is NET and VAT will be added where applicable.

Condition: good (used), functionality: fully functional, Year of construction: 2009, pipe diameter (max.): 60 mm, pipe length (max.): 6,000 mm, bending radius (max.): 200 mm, bending radius (min.): 35 mm, overall weight: 4,400 kg, input current: 63 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, emergency stop, We are offering this used Dynobend DB60 tube bending machine, manufactured in 2009. Manufacturer: Dynobend Type: DB60 Machine number: 2009-11-B789 Year of manufacture: 2009 Bledpfx Aj Ahiuaektep Weight: 4,400 kg Voltage: 230/400 V Frequency: 50 Hz Connected load: 40 kVA Maximum current: 63 A Great opportunity from a single owner: High-quality mandrel bending machine Dynobend DB-60 including a €70,000 tool package. For sale is a powerful and precise mandrel bending machine, type Dynobend DB-60, manufactured in 2009. The machine was purchased new directly from the manufacturer and has been in our possession ever since. It has been regularly maintained. It bends predefined designs fully automatically and reliably. The absolute highlight: Huge tool package included! The machine comes with an extremely comprehensive package of 18 different tool sets for round tubes ranging from Ø 17.2 mm to Ø 60.3 mm. The new price for these tools alone was approximately €70,000. This means you will be ready for an extremely wide range of tube processing applications immediately. Technical highlights & scope of performance: • Maximum tube length: up to 6,000 mm can be processed. • Intelligent control: The calculation of all required bending parameters is carried out according to the X-Y-Z coordinate system with convenient input via the touchscreen. • Bending radius: The largest possible neutral bending radius is at least 200 mm. • Condition & maintenance: Good, used condition. The machine has been regularly maintained directly by Dynobend; any necessary wear parts have been replaced promptly when needed. • Usage note: The fully automatic bending process depends on the minimum straight intermediate length between two bends as well as the overall design (with regard to potential collisions with the machine/floor in complex shapes). Important technical note: The laser scanner of the safety system has already been replaced, but it is currently not functioning correctly. The customer may need to take remedial action or make improvements. Complete documentation available: The machine will be delivered with all important and legally relevant documents: • EC declaration of conformity (Directive 98/37/EEC, Annex II A) • Original acceptance test report • Complete original operating manuals (pneumatics, hydraulics, electrical system, Sick laser scanner, program manager, and user manual) • All descriptions and maintenance invoices are available and can be disclosed. Inspection & demonstration welcome: Come and see for yourself! The bending machine is currently powered up and fully functional. After prior arrangement, we will be happy to demonstrate the machine in operation. Sales and delivery conditions: • Price: On request / negotiable. • Delivery condition: Ex works (EXW). • Logistics: The dismantling, the proper loading, and the removal must be organized by the buyer or carried out by a commissioned shipping company. Subject to prior sale. Take advantage of this opportunity for an immediately ready-to-use professional machine with enormous accessory value. We look forward to hearing from you and arranging an appointment for an inspection!

Condition: good (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: 325100, number of rollers: 3, shaft diameter: 100 mm, pipe diameter (max.): 120 mm, overall weight: 3,000 kg, Equipment: documentation/manual, emergency stop, I am offering for sale a profile bending machine, purchased new in 1990, manufactured by COMAC, type 3025 HV, with standard configuration including vertically arranged bending axes. It is in fully operational condition and can be demonstrated under power after prior arrangement. - Control panel on the swivel arm with joysticks and switches - Digital displays for the two side rollers Maintenance & Condition: The machine is in excellent condition. In 2023 and 2025, it underwent extensive repair and overhaul work at a specialized workshop. The total investment volume for both measures amounted to approximately €50,000 net. Documentation & Evidence: The entire maintenance history is completely documented. Detailed evidence of the individual items, as well as all original invoices, is available and can be provided upon request. Original manual available. Enormous added value: Extensive tool and profile package included! To be able to serve customer orders in an even more flexible and individualized manner, significant investments were made in expanding the tool range. In addition to the standard tools, you will receive: a seven-page detailed list of all tools, including photos. • Tools for various round tubes Ø (57 + 60.3 + 70 + 76.1 steel + 76.1 plastic, + 80 + 88.9 + 101.6 + 108 + 114.3 + 120) mm. • Special tool for flat profiles, light axis up to a height of 500 mm. • Tools for square and rectangular tubes. • Tools for angle iron • Tools for special profiles Bljdpfs Af Utasx Aktsp Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The disassembly, loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him. Technical specifications according to available documentation. Subject to prior sale. If you have any questions or require further information, please send us a message or call us.

Condition: as good as new (ex-display), Year of construction: 2025, plate thickness 1.20 mm ST Shaft length 140 mm roll diameter 62.0 mm throat 100 mm roll speed 16.0 + 32.0 U/min engine output 0.75 kW weight 135 kg range L-W-H 900 x 450 x 1350 mm Display machine - like new Never been used (!!) Special price upon request Bjdpfxexaaf Rj Aktjlp Features: - 8 pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - For economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Clearly arranged control elements - Manual adjustment of the upper roller - 2 bending speeds - Powerful drive motor, even under continuous load - 1 mobile foot switch for forward and reverse rotation - Machine base frame

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Bljdpfx Aswk Rlxoktjp Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, overall weight: 6,300 kg, roller diameter: 250 mm, working length: 3,100 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bending length: approx. 3,100 mm Roller diameter: approx. 250 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,000 x 1,800 mm Bjdpfe Ahg T Hsx Aktolp Total weight: 6,300 kg

Condition: good (used), Year of construction: 2020, operating hours: 42 h, functionality: fully functional, machine/vehicle number: 220/831, overall weight: 550 kg, total length: 2,200 mm, total height: 1,900 mm, total width: 1,100 mm, table width: 250 mm, table height: 900 mm, space requirement height: 2,000 mm, space requirement width: 1,200 mm, space requirement length: 2,500 mm, type of input current: three-phase, input voltage: 460 V, Equipment: CE marking, emergency stop, We have a bending machine for sale. It has only been used for 42 hours and 31 minutes, as can be seen in the attached picture. Bledpfo Afyq Ujx Aktop It is in good condition and well-maintained. If you are interested and require further details, please call or send me an email.

Condition: good (used), Year of construction: 2010, 1 used pipe bending machine Manufacturer: Tubobend 48 Year of manufacture: 2010 Technical data: - Bending capacity - Pipe with 45 kg/mm²: Ø 6 - 48 mm - Solid material up to approx. 30 mm - Max. bending angle 180° - Bending radius 2 x D - Drive: 400 V / 1.5 kW - Space requirement: approx. W 7500 x H 1400 x D 1000 mm - Weight: approx. 600 kg - With fine adjustment for bending angle - Mandrel bending device, 6.0 m, with hydraulic retraction - Bending tools Equipped with: - Torsion device - Deburring station Bedpfx Aks Ahwf Uotslp - Hydraulic mandrel retraction - Lubrication - As well as 6 tool sets and the corresponding mandrels

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, LiSEC, BSV-30K with A1RL Autom. Frame Bending Machine BSV-30K + Profile Magazine Processing of aluminum, steel and Chromatec Ultra printer and bending tools included. with A1RL autom. Desiccant Filling Machine for Bent Spacer Frames. Connection: 3/N/PE-50 Hz, 400V | Year: 2012. Bledpfxe Ahpxqj Aktjp In good technical condition. Available: NOW

Condition: like new (used), functionality: fully functional, Year of construction: 2021, operating hours: 100 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Schneider, shaft diameter: 50 mm, bending force (max.): 10 t, overall weight: 2,200 kg, total length: 2,670 mm, total width: 1,650 mm, total height: 1,400 mm, input voltage: 380 V, input current: 24 A, type of input current: three-phase, Equipment: CE marking, documentation/manual, For sale: an INDUCTAFLEX AL-1e 4-roller CNC profile bending machine, purchased in 2021. It has been used very little and has only been switched on for a total of 100 hours over the years. It comes with a complete set of rollers, including a separate holder. INDUCTAFLEX AL-1e 4-roller CNC tube bender + tool set - Purchased in 2021 Bodpfx As Afb Afjktjlp - CNC-controlled, 4-roller bending machine for aluminium profiles and tubes - Bending force: 10 t - Repeat positioning accuracy: 0.05 mm - Torque per roller: max. 2,500 Nm - Shaft diameter: 50 mm - X-axis stroke: 200 mm - Dimensions: 1,650 × 2,670 × 1,400 mm - Weight: approx. 2,200 kg - Includes a tablet for training purposes - Tool set with holder - Located in Budapest, Hungary

Condition: good (used), Year of construction: 1987, overall weight: 42,000 kg, total width: 6,000 mm, total length: 7,800 mm, total height: 3,900 mm, sheet thickness (max.): 22 mm, Flanging and dishing machine SCHLEIFSTEIN - KBol 4022 MACH-ID 9659 Make: SCHLEIFSTEIN Type: KBol 4022 Year: 1987 Range off edge radius Manual 20 - 500 Range off edge radius Automatic 150 - 500 Hydraulic Controllable forming roll drive Hydraulic displacement drive Clamping device without hole Blsdpfozfi Hhsx Aktjp Max. pressure manipulator 2000 Psi / 140 bar Max. pressure press 5700 Psi / 400 bar Max. speed forming roll 170 M/Min Kunkel head forming rolls: R = 350 R = 300 R = 275 R = 250 R = 200 R = 175 R = 150   Basket bottem Knocker bottom Pressure vessel bottom Boiler bottoms Flat floor Plate base diffuser bottom Tank bottom Tank bottom Radar reflectors Engine parts Dispense air Silo hoppers Cooker hoods Container parts Hemispheres Max. workpiece: 4600Ø Maximum sheet thickness:22mm Max. dishing radius: 700mm Min. product Ø: 800 Min. plate thickness: 4mm Min. dishing radius: 35mm Power: 90kW Length: 7800mm Width: 6000mm Height: 3900mm Weight: 42000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2008, pipe diameter (max.): 20 mm, pipe length (max.): 3,000 mm, bending radius (max.): 45 mm, overall weight: 180 kg, total length: 3,300 mm, total height: 1,150 mm, operating pressure: 125 bar, Equipment: documentation/manual, emergency stop, foot remote control, quick-change device, We are offering this used TRACTO-TECHNIK TB20D mandrel bending machine for sale. Serial number: TB20D 2110608 Year of manufacture: 2008 For sale is a mandrel bending machine, type: Tracto-Technik Tubobend TB20D, 3000 mm, from its first owner. The machine was purchased new by us in 2008 and has been in our possession ever since. It is fully operational and can be demonstrated under power upon prior arrangement. The TUBOBEND 20 mandrel bender is a pipe bending machine with a free bending head for processing pipes in all planes. It is designed for work involving adjustments according to drawings or samples, as well as for series production. With the TUBOBEND 20 mandrel bender, precision steel pipes according to DIN 2391/C, material St 35.4 NBK (hydraulic pipes), 6-16 mm diameter can be processed. The processing of other pipe qualities and dimensions is also possible. The mandrel system allows for the smallest technically feasible radii to be achieved. If required, a folding smoother can also be used. The bending unit is designed in such a way that even serpentine (meander) bends can be made. Dimensions: L x W x H in mm 920 x 720 x 1800 (without stop device) Machine lower part 630 x 550 x 700 Machine upper part 920 x 720 x 500 Weights: Total weight approx. 180 kg (without stop device) Machine lower part with hydraulic unit approx. 74 kg Bodpfe Abbmpjx Aktelp Safety device: - Emergency stop button: A central emergency stop button for the TUBOBEND 20 is located on the control panel. Safety cover with electrical shut-off in the hazard area of the bending arm. Description and overview: The TUBOBEND 20 mandrel bender is a small, mobile, compact pipe bending machine that can be easily disassembled into two main components for transport purposes. The bending head can be swivelled from the vertical to the horizontal position. The pipe feed length is 1500 or 3000 mm. Extensive scope of supply (a very large number of tools included!): An advantage of this offer is the extensive tool package, which is completely included in the price: see separate list. Documentation: Original operating manual is complete. EC Declaration of Conformity available. Note: The machine will only be sold as a complete package together with the complete set of tools according to the attached list. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: Dismantling, loading and collection must be organized and carried out by the buyer himself or by a shipping company commissioned by him. Technical data according to available documents. Subject to prior sale.

Condition: like new (used), functionality: fully functional, Year of construction: 2022, machine/vehicle number: 00031444-ER, stroke length: 275 mm, throat depth: 410 mm, operating speed: 160 mm/s, reverse speed: 165 mm/s, table height: 900 mm, oil tank capacity: 150 l, overall weight: 4,320 kg, total length: 3,175 mm, total width: 2,100 mm, total height: 2,580 mm, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, pressing force: 60 t, table length: 1,270 mm, Equipment: documentation/manual, Manufacturer: ERMAKSAN Model: Speed-Bend Pro 1270×60 Machine type: CNC Hydraulic Press Brake The ERMAKSAN Speed-Bend Pro 1270×60 is a high-precision CNC hydraulic press brake designed for accurate and efficient sheet metal bending. With a maximum bending force of 60 tons and a bending length of 1,270 mm, this machine is suitable for a wide range of industrial sheet metal processing applications. Technical Specifications Maximum bending force: 60 tons (600 kN) Maximum bending length: 1,270 mm Ram stroke: 275 mm Bjdpfx Akoz Slyqstolp Table height: 900 mm Table width: 90 mm Main motor power: 7.5 kW Power supply: 400 V, 3-phase, 50 Hz CNC control: Delem DA-66T (depending on machine configuration) Tool Clamping System: European-style tooling clamping system Side safety guards Foot control: Dual foot pedal Electrical system: Siemens Hydraulic system: Hoerbiger hydraulic system Controller: CYBELEC CYBTOUCH 15PS 2D Upper Tooling (Punch): Rolleri PS 135.85.R08 Machine available from January 16, 2027.

Condition: good (used), functionality: fully functional, Year of construction: 2011, Used 6-meter pipe bending machine with Siemens control Pipe length: 4 meters Year of manufacture: 2011 Bledo Agu D Eepfx Aktop 6 tool sets Round 22, radius 44 Round 42, radius 84 Round 28, radius 56 Round 18, radius 36 Round 35, radius 70 Round 54, radius 108

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, Concrete rebar bending machine / Bending machine B 50 – Exhibition model COMPLETE TECHNICAL SPECIFICATIONS – SEE PHOTO - CE marking - Incl. bending pins / stop / bending sleeves Bledpfx Aezvy S Nsktop - Safety guard / end switch activated - Bending capacity max. 50mm / diameter (single bar) - Foot switch - Complete documentation - Bending via program or individual bends Dimensions: L x W x H 1.3 x 0.9 x 1 meter / Weight 600 kg Errors and omissions excepted.

Condition: good (used), functionality: fully functional, Year of construction: 2005, SIMASV CHV - Type 3360 Notching Machine - *Brand:* SIMASV SRL - Thiene (VI) Italy - *Model:* CHV - *Type:* 3360 - *Serial Number:* HV3360 / 1575 - *Year:* 2005 - *Power:* 3 kW - *Power Supply:* 400V / 50Hz - *CE Marking:* Yes The 3360 version from SIMASV features: Bjdpfx Aks Ahrdiotjlp - *Shafts Ø 60 mm* (hence the 60) - *Rollers Ø 155-160 mm* - *3 motorized rollers* - *2 hydraulically controlled side guide rollers* (the 2 arms on the sides) - *Capacity:* Tube Ø 60x3 mm / Flat bar 100x15 / Angle iron 60x60x6 / I-beam 80 approximately – it is a small/medium-sized machine - *Weight:* ~ 600-700 kg - *Control:* Foot pedal, digital display of stroke length, hydraulic descent.

Condition: used, functionality: fully functional, Year of construction: 2004, machine/vehicle number: 265040200001, Technical specifications available upon request. Bodpezd Hhmsfx Aktolp

Condition: refurbished (used), Year of construction: 1980, functionality: fully functional, throat depth: 2,700 mm, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, overall weight: 2,120 kg, total width: 1,200 mm, total length: 4,500 mm, total height: 2,000 mm, space requirement height: 2,300 mm, space requirement length: 4,800 mm, input voltage: 400 V, workpiece weight (max.): 2,000 kg, Refurbished Pullmax Kumla F13C edge rolling,flanging machine in excellent condition for sale. Can edge roll, flange dished ends from mild steel sheets up to 13 mm thick and stainless steel sheets up to 10 mm thick! Bedpfx Asy Tni Tsktslp

Year of construction: 2021, condition: used, functionality: fully functional, T-nut inserting machine for Large Flange T-nuts Bljdpfx Akszbu R Estjp

Condition: good (used), Year of construction: 2005, Technical data: Min. bending capacity steel: ø 19.8 x 3.0 mm Max. bending capacity steel: ø 76.1 x 3.0 mm Max. bending capacity stainless steel: 76.1 x 1.65 mm Bjdpfx Aj Ahr T Rjktjlp Bending radius: max. 150 mm Bending angle: max. 190° Bending direction: clockwise (right) Max. tube length: 6000 mm Adjustable control panel CE marking Dimensions (length x width x height): approx. 7200 x 2000 x 1650 mm Weight: approx. 3 tons Accessories: Tools D 20 R 40 D 30 R 75 D 25 R 50 D 16 R 40 Condition: Very good condition, little used The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear are commensurate with its age; used machines are sold without any warranty.

Condition: ready for operation (used), functionality: fully functional, JUTEC Type 3000 with profile bending attachment PB 20 -CE marking -Bending capacity / flat steel 100x8mm -Bending capacity / round material 20mm -Digital angle bending adjustment / display -Material stop -Drive: electromechanical -Control: digital Blsdpfjz S Afpsx Aktjp -6 rpm (bending roller) -Tool holder / hexagon 40mm -Foot switch -Documentation Dimensions: L x W x H 0.8 x 0.7 x 1.5 meters / Weight approx. 85 kg Errors and omissions excepted.

Condition: used, Year of construction: 2005, table length: 6,000 mm, total length: 6,000 mm, input voltage: 400 V, Ercolina EB 45 with tooling for inch-sized pipes Bljdpfoyr H A Iex Aktsp Inspection and demonstration possible by appointment.