Used Bevel Gear Generator for sale (27,901)

Condition: good (used), max. wheel diameter 1600 mm gear width 250 mm max. module 30 min. module 8 range of tooth size 58 mm tooth width 250 mm weight of the machine ca. 42,3 t dimensions of the machine ca. 4,45 x 6,00 m - Cone spacing in mm. for spiral angle 30° minimum: 150 maximum: 800 - Taper angle, in degrees minimum: 5 maximum: 85 - Tooth angle minimum: 0° maximum: 45° - Number of teeth to be cut minimum: 10 maximum: 150 The machine is complete, fully functional and in good condition. Equipment / accessories: - complete set of change wheels - 4 pcs. cutter heads - various milling cutters - Operating instructions in English Ielhccou Dbuceqneth

Condition: good (used), Year of construction: 1987, working condition Ijlhccqewpgckenjth set change gears working dia. 800mm

Condition: used, Year of construction: 2000, Technical details: max. wheel diameter: 275 mm gear width: 55 mm max. module: 6,5 min. module: 1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be “prepared” for the individual part procedure. I.e. direct measuring system + part gear brake, workpiece axis + license file for the production of individual parts. Ijlhcev N Hiljcqnsth *

Condition: like new (used), Year of construction: 2002, max. wheel diameter 275 mm gear width 58 mm max. module 13 min. module 2 control SINUMERIK 840 D min. number of teeth 5 max. number of teeth 2000 transmission ratio 1:10 b-axis -5 / +90 ° total power requirement 75 kW voltage 400 V voltage 230 V weight of the machine ca. 9,4 t dimensions of the machine ca. 4,7 x 3,6 x 2,82 m Gleason-Pfauter 275 HC - NC bevel gear milling machine - Year of manufacture: 2002 - Equipped for milling with oil - Integrated magnetic chip conveyor, without cutter head + holders Technical data 275 HC: (workpiece) - Maximum transmission ratio --> 1:10 - Minimum number of teeth --> 5 - Maximum number of teeth --> 2000 - Maximum tooth height / full tooth depth --> 20 mm - Maximum tooth width --> 58 mm - Maximum pitch circle diameter --> 275 mm (tool) - Smallest permissible milling head Ø --> 2.5 inch - Largest permissible milling head Ø --> 9 inch (machine) -> slide path 325 mm - Vertical workpiece slide (Y-axis) --> 350 mm - Milling slide (Z-axis) --> 475 mm -> Largest basic angle 90° - Direction -B --> -5° -> Workpiece table 212.71 mm (speeds) -> feeds 1 - 6,000 mm/min -> rapid traverse 10,000 mm/min - B-axis --> 40 °/s Ijlhevzhhmjccqneth -> Speeds 0 - 1,100 min/-1 - Workpiece table --> 0 - 1,100 min/-1 Translated with (free version)

Condition: excellent (used), Functionality: fully functional, ONLY FOR REALLY INTERESTED PEOPLE and WHO UNDERSTANDS THE VALUE OF THESE MACHINE. only experts. 4 MACHINES AVAILABLE.. Itelewau T Eehccqneh

Condition: excellent (used), gleason no.601 g-plate gear cutting machine Ijlhccqjvavwmensth

Condition: ready for operation (used), Year of construction: 1988, SARATOV 5C280P Spiral Bevel Gear Generator -2 machines Max gear diameter 800 mm Max module 16 Max gear ring width 125 mm Number of theet 5-150 Spindle speeds range 20-125 rpm Main motor power 7,5 kW Itelhjum Ez Rjccqnjh Overall dimensions LxWxWxH 3170x2180x2200 mm Weight 15 t

Condition: used, Year of construction: 1997, max. wheel diameter 275 mm gear width 150 mm max. module 6 min. module 1.5 max. workpiece diameter 275 mm tooth width max. 5.5 mm spiral angle 0 - 60 ° number of teeth 5 - 120 transmission ratio min. 1:1 transmission ratio max. 1:10 milling drive motor 20 kW workpiece drive 14.5 kW total power requirement 62 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,7 x 4,387 x 2,45 m Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 r.p.m. Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 r.p.m. - workpiece spindle passage 90 mm Workpiece positioning axis (Y-axis) - travel 870 mm - speed max. 4.5 m/min Roller rotation axis (A-axis) - swivel range 315° - swivel speed max. 40°/s Axis intersection (Z-axis) - travel range max. +/- 50 mm - speed max. 0.657 m/min Workpiece swivel axis (C-axis) Itslod Il R Ajhccqnsh - swivel range -8.5 to 98° - swivel speed max. 21.5 °/s Milling depth axis (X-axis) - travel from -25 to 640 mm - max. speed 6 m/min Machinen distance (V-axis) - travel 150 mm - speed max. 1.6 m/min - 13 milling cutters included -

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Itjlhoruakgsccqneh Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: used, Year of construction: 1997, max. wheel diameter 275 mm gear width 150 mm max. module 6 min. module 1,5 total power requirement 62 kW weight of the machine ca. 12 t dimensions of the machine ca. 4,7x4,4x2,45 m max. wheel diameter mm gear width mm max. module 6 min. module 1.5 max. workpiece diameter 275 mm tooth width max. 5.5 mm spiral angle 0 - 60 ° number of teeth 5 - 120 transmission ratio min. 1:1 transmission ratio max. 1:10 milling drive motor 20 kW workpiece drive 14.5 kW total power requirement 62 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,7 x 4,387 x 2,45 m Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 [...] Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 [...] - workpiece spindle passage 90 mm Workpiece positioning axis (Y-axis) - travel 870 mm - speed max. 4.5 m/min Roller rotation axis (A-axis) - swivel range 315° - swivel speed max. 40°/s Axis intersection (Z-axis) - travel range max. +/- 50 mm - speed max. 0.657 m/min Workpiece swivel axis (C-axis) - swivel range -8.5 to 98° - swivel speed max. 21.5 °/s Milling depth axis (X-axis) - travel from -25 to 640 mm - max. speed 6 m/min Machinen distance (V-axis) Ielhceul Etdjcqnjth - travel 150 mm - speed max. 1.6 m/min

Condition: good (used), KLINGELNBERG AMKU 630 Iolhccqjufv U Doneth

Condition: ready for operation (used), Straight bevel gear generator SARATOV 5C276P Max Module 10 Max. gear wheel diameter 500 mm Max. gear wheels cone distance 250 mm Max. gear ring width 80 mm Itelhceuc T Hxocqnoh Min. angle of dividing cone (pitch), degrees 5 Number of wheel teeth: 10 - 150 Distance between spindle and machine center, mm - max. (stock angle 5 degrees) 375 mm; - min. (stock angle 90 degree) 75 mm Stroke 100 mm Slider double stroke 48 - 400 spm Motor capacity 4 KW Machine dimensions 2885 x 2570 x 1995 mm Machine weight 8750 kg

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Ijlertrykohccqnsth Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: used, Year of construction: 1998, workpiece diameter with ratio 1:10 300 mm workpiece diameter with ratio 1:1 212 mm Itjlhccqjul El Tjnjh max. number of teeth 200 min. number of teeth 6 x-travel 300 mm X - Axis speed 0,1-5.000 mm/sec. y-travel 400 mm Y - Axis speed 0,1-5.000 mm/sec. A - axis -170 / +170 ° control Siemens Sinumerik 840 C total power requirement 38 kW weight of the machine ca. 10 t dimensions of the machine ca. 4,20 x 2,20 x 2,10 m incl. suction

Condition: used, amount 1 STK Mikron 120 bevel gear milling machine Year of construction approx. 1960 Application -> face gear cutting Itslheucplqsccqnjh 95°Re to 90° Li With interchangeable wheels for feed & number of teeth Power: 380V, 50Hz, 2,51A, 0,61kW - max. outer wheel Ø : 40 [mm] - max. milling length : 30 [mm] - max. wheel module : 1 - tapered/cylindrical milling cutter dimensions : Ø 28 / 24 [mm] - milling head inclination : 0 - 10 [°] - work spindle holder swivelling : 0 - 90 [°] - Milling spindle speed : 250 - 1830 [rpm] - Blank turning feeds : 0.01 - 0.26 [mm] - Number of teeth : 6 - 260 - Motor power : 0.75 [CV] - Pliers type : W20 - Dimensions : 70 x 80 x 139 [cm] - Weight with base : 278 [kg]

Condition: used, Year of construction: 1972, dimensions of the machine ca. - m Itjlhccqeucl Axsnoh Bevel gear cutting machine Mikron 120.01 Application -> Face gear cutting

Condition: good (used), overall weight: 20,000 kg, Bevel Gear Planner OERLIKON K4a Maximum gear ratio i=1:8 Maximum pitch diameter of the gear in i=1:1 1 250 mm Maximum pitch diameter of the gear in i=1:8 1 600 mm The biggest module 30 Itjljuphicohccqnoh The smallest module 2 Maximum number of teeth 300 Minimum number of teeth in i=1:1 20 Minimum number of teeth in i=1:8 10 Maximum width of the tooth 300 mm Maximum lift of the planer heads 320 mm Minimum lift of the planer heads 50 mm Maximum radius of the basic gear 950 mm Minimum radius of the basic gear 170 mm Maximum angle of the pitch cone 83° Minimum angle of the pitch cone 7° Maximum distance of the face plate from the cone peak 950 mm Minimum distance of the face plate from the cone peak

Condition: good (used), Year of construction: 2001, Functionality: fully functional, Gear grinding machine Gleason Pfauter G320 CNC + Promot Automation - Gear grinding machine Itjlsu Sqgqohccqnsh Manufacturer: Gleason Pfauter G320 + with Promot Automation handling unit Type: G 320 Control unit: Siemens 840 Incl. control panel Year of construction: 10/2001 Module: 0.5-7.0 Min. workpiece diameter: 10 mm Max. workpiece diameter: 380 mm Number of teeth: 10-600 Vertical slide stroke “Z“: 200 mm Horizontal slide stroke “X“: 230 mm Tangential slide stroke (SHIFTING) “Y“: 135 mm Swivel angle of clamping head “A“: +-45° Stroke – tailstock center [ ]: 125mm Tangential slide stroke – dressing [ ]: “V“ 180mm Radial slide stroke – dressing [ ]: “U“ 110mm Rotation speed – grinding wheel in processing [ ]: 3000rpm max - infinitely variable Edge speed – linear axes [ ]: 10000 mm/min Max. table rotation speed [ ]: 240 RPM Table resolution [ ]: 0.001° Processing feeds [ ]: infinitely variable Working feeds [ ]: infinitely variable Grinding wheel dimensions Min/Max. diameter [ ]: 270/350mm Width [ ]: 104mm/max. Bore [ ]: 160mm System weight [weight]: 11,500kg Accessories [accessories]: as per photos +Promot-Automation +Conveyor belt +Cooling belt system +Hydraulic unit Space requirement for machine [needed space ]approx. (W x D x H): 3.7m x 2.4m x 2.75m Space requirement for Promot Automation [needed space ]approx. (W x D x H): 4.5m x 1.6m x 4.0m Complete documentation is available. Functionality and machine features: Cylinder grinding machine with 8 numerically controlled axes for machining gears with straight and helical gears that can be produced by rolling, including a dressable worm profile disk. Linear and rotary main axes are designed to be hydrostatic. High-performance machine for finishing cylindrical gears with straight or helical involute teeth. Inspection under power can be arranged at short notice. If you have any further questions, please do not hesitate to contact us. Price, ex warehouse here plus VAT Condition: good - ready for demonstration Delivery: ex warehouse - as viewed Payment: net - after receipt of invoice Subject to prior sale, errors excepted. We ask for your order. Other machines and systems available from stock - please enquire. We look forward to hearing from you.

Condition: used, Year of construction: 2004, max. wheel diameter 300 mm max. module 8 min. module 0,7 Control SINUMERIK 840 D min/max. pitch cone angle - 90 / + 90 ° workpiece spindle - bore 127 mm grinding wheel diameter 50 - 230 mm spindle speeds (infinitely variable) 7.500 U/min total power requirement 146 kW work piece spindle speed 700 U/min Itslhcevxww Escqnjh weight of the machine ca. 21 t dimensions of the machine ca. 9,5 x 3,6 x 3,1 m Measuring probe (integrated on the grinding head) External grinding spindle cooling system ELBARON oil mist extraction (integrated in the machine) Hoffmann coolant filter system Was used for the serial production of spiral-toothed ring gears No clamping devices No grinding wheels / grinding wheel flanges No dressing wheels

Condition: good (used), Year of construction: 2002, max. wheel diameter 275 mm gear width 55 mm max. module 6 min. module 1 Control 840 C Siemens Itolhccjtumrpoqneh total power requirement 100 kW weight of the machine ca. 16,7 t dimensions of the machine ca. 5,2 x 2,3 x 2,4 m m

Condition: used, Year of construction: 2007, max. wheel diameter 500 mm Hypoid adjustment ±70 mm Ioljukitxohccqneth axial cross angle 90 ° Distance Y- 150 - 350 mm Distance Z-axis 120 - 340 mm turning speed range - stepless 0 - 5000 U/min max. torque on the spindle 57 Nm Cone 99,2 mm Pull-in force Tool clamping 23000 N Braking torque max. 93 Nm total connected load 20 kVA total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2,35 x 2,24 x 2,5 m

Condition: used, Functionality: fully functional, The bevel gear testing machine Gleason-Welter 2000 T was designed as a universal machine and is used by manufacturers of gears and transmission technologies for the single flank rolling test process of bevel and crown gears. Itjlhccswn D Uheqnsh Technical Data Diameter: 2000 mm Spindle bore: 310/250 mm Test speed: 5-100 rpm Dimensions: approx. 4,200 x 4,500 x 2,300 m Machine weight: approx.12,500 kg *Specifications and data are non-binding, subject to prior sale Special Features: Angle-hypoid test device, suitable for testing larger sizes of bevel and hypoid gears with a diameter of up to 2,000 mm and shaft angles from 0 to 360 degrees, as well as straight, helical, and internal gearing. Deviations in gear geometry, machining errors through defective tools, as well as damage to the gears, can thus be identified and eliminated before assembly. The following parameters can be measured here: - Single flank rolling deviation Fi', fi', fl', fk' - Pitch deviations Fp, fp, fu - Runout and roundness - Runout error Fr - Backlash - FFT analysis For technical questions and further information, you can contact us at any time.

Condition: used, Year of construction: 2003, max. wheel diameter 275 mm gear width 58 mm max. module 13 min. module 2 Control SINUMERIK 840 D number of teeth 5 - 200 ratio of transmission 10:1 cutter diameter max. 228 mm x-axis 25 - 350 mm y-axis +/- 175 mm z-axis 125 - 600 mm b-axis -5 / +90 ° total power requirement 75 kW weight of the machine ca. 11,7 t dimensions of the machine ca. 12,5 x 3,0 x 3,0 m Equipped for dry milling Itjljvxwukehccqnjh Pressure deburrer Deburring device with driven brush Integrated magnetic chip conveyor Promot Cellmaster Cartridge pulse filter system User interface control works with Gleason Summary

Condition: used, Year of construction: 1998, max. wheel diameter 600 mm gear width 450 , 600 mm distance gear spindle / pinion head 40 - 450 mm distance pinion spindel head / gear head -160 - 600 mm axis adjustment +/- 60 mm spindle turning speed - stepless 1 - 2120 U/min spindle bore 130 mm taper in main spindle MK 60 total power requirement 30 kW weight of the machine ca. 6,6 t Itjlhsvyum Heccqnjh dimensions of the machine ca. 2,8 x 1,8 x 2,1 m Bevel gear testing machine, 2 flank testing!

Condition: used, Year of construction: 2002, crown gear diamter max. 500 mm distance crown gear spindle - front pinion spindle 150 - 350 mm distance pinion spindle - front crown gear spindle 120 - 340 mm control GE FANUC Series 160i-M 70 mm pinion turning speeds max. 0 - 3.000 mm crown gear turning speeds max. 0 - 2.600 U/min inner taper pinion spindle Ø 99,2 mm inner tape crown gear spindle Ø 99,2 mm rated current 30 A weight of the machine ca. 6,40 t dimensions of the machine ca. 2,40 x 2,20 x 2,10 m Itolhcovxwpuocqneh Own lapping system included Was also operated at a lapping center