Used Bevel Gear Generator for sale (17,992)

Condition: good (used), Year of construction: 1995, functionality: fully functional, The perfect retrofit machine! Mechanically in phenomenal condition! This machine can be inspected under power until 12.05.2026 and will then be dismantled due to space constraints. Please refer to the attached KLINGELNBERG inspection reports available for download. Gleason P 800 Year of manufacture: 1995 Control: SIEMENS 840 C (discontinued) Condition: Mechanically in excellent condition Functionality: Fully operational Inspection: Available under power Technical Data: Nominal workpiece diameter: 800 mm Max. workpiece diameter: 800 mm Max. workpiece diameter, special version: 1,200 mm Nominal module: 20 / 30 mm Nominal module, special version: 25 / 35 mm Drive power: 35 kW Drive power, special version: 52 kW Cutter head speed range: 20 - 200 rpm Cutter head speed range, special version: 26 - 265 rpm Additional cutter head speed range, special version: 36 - 360 rpm Ljdpfx Aey Hfm Nobyjag Cutter head swivel range: +30 / -45 degrees Cutter head dimensions (standard cutter head), diameter/length: 350 / 375 mm Min./max. center distance workpiece/tool: 50 / 600 mm Center distance workpiece/tool, special version: 50 / 800 mm Max. axial slide travel: 700 mm Max. axial slide travel, special version: 1,000 mm Max. axial slide travel, special version: 1,300 mm Lowest cutter head position above table: 450 mm Table diameter: 800 mm Table bore diameter: 245 mm Table bore depth: 875 mm Max. table speed: 15 rpm Max. table load: 10,000 kg Machine dimensions: Width A: 5,800 mm Length B: 6,900 mm Height C: 4,700 mm Machine weight: 22,000 kg Regarding the current KLINGELNBERG gear inspection data BEFORE grinding: "Pitch and lead are inconspicuous. One measurement shows a borderline or slightly out-of-tolerance fHα deviation in the profile. Please check whether this value is permissible according to the drawing/customer approval or if correction/rework is required. The gears were always forwarded for grinding to the RZ 1000 REISHAUER and processed accordingly. Nevertheless, overhaul of the C-axis is recommended. A cost estimate from GLEASON PFAUTER LUDWIGSBURG is available. Estimated cost: 10,000 EUR."

Condition: used, Year of construction: 2004, functionality: fully functional, CNC gear hobbing machine Control: Siemens 840 D Power Line Technical data: Max. workpiece diameter: 150 mm Table diameter: 145 mm Max. table speed: 800 rpm Distance between centers: 10 – 200 mm Max. axial travel: 250 mm Swivel angle of milling head: +/- 45° Max. tailstock travel: 300 mm Max. rapid traverse rate: 17,000 mm/min Drive power of milling head: 19 kW Max. module: 3 mm Max. speed of milling spindle / tool speed: 4,500 rpm Max. diameter of hobbing cutter: 80 mm Max. length of hobbing cutter: 200 mm Dimensions approx.: 5.5 x 3.7 x 3.1 m Weight approx.: 9,500 kg Equipment: Chip conveyor Oil mist extraction / oil extraction Oil cooler Steady rest with lowering device and vertical adjustment Rotary ring loader with two workpiece grippers Loading belt system for automatic feeding 5 milling arbors / hobbing cutter holders: 1 x Ø 22 mm 2 x Ø 27 mm 1 x Ø 32 mm Ljdozkwvnspfx Abyjag 1 x Ø 40 mm Other: Video recordings via WhatsApp

Condition: like new (used), Year of construction: 2024, operating hours: 7,556 h, functionality: fully functional, 4 x LIEBHERR LC 280 DC Gear Hobbing Machines For sale are 4 identical LIEBHERR LC 280 DC gear hobbing machines, all manufactured in 2024. Manufacturer: Liebherr Verzahntechnik GmbH Model: LC 280 DC Machine Type: CNC gear hobbing machine with integrated ChamferCut unit Quantity Available: 4 units Year of Manufacture: 2024 Example Machine No.: XXX Control: Siemens CNC / HMI user interface Technical Data: Max. Workpiece Diameter: 280 mm Max. Module: 6 mm / 4 mm depending on the version Axial Travel: 400 mm Shift Travel: 200 mm Max. Hob Diameter: 150 mm Hob Speed: 2,250 / 6,000 rpm Table Speed: 250 / 800 rpm Max. Module ChamferCut: 5 mm Max. Tool Speed ChamferCut: 2,000 rpm Max. Tool Diameter ChamferCut: 130 mm Max. Tool Clamping Length Drilling Tool: 236 mm Max. Tool Clamping Length Shank Tool: 360 mm The LC 280 DC is a compact gear hobbing machine for workpieces up to 280 mm in diameter and integrated ChamferCut machining; according to Liebherr, it is designed for gear hobbing and parallel, defined deburring/chamfering. ([Liebherr][1]) Equipment: Integrated ChamferCut unit Automatic workpiece handling / round magazine Siemens CNC control Liebherr HMI / production interface Workpiece spindle Hobbing head Deburring/chamfering unit Full protection cabin Work area lighting Automation interface CE marking Machine suitable for dry and wet machining, depending on equipment and process Electrical data per machine according to the nameplate: 400 V AC 50 Hz Control voltage: 24 V AC Installed power: 29 kVA Rated current: 42 A Lajdpfx Abozdv Upsyog cos φ: 0.81 Fuse: 63 A gL Control cabinet weight: 900 kg All 4 machines are identical, manufactured in 2024, and come from modern industrial series production. Technical data according to nameplate, manufacturer's specifications, and photo documentation. Subject to errors and prior sale.

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, fuel type: gas, output current: 178 A, output voltage: 6,600 V, output frequency: 50 Hz, continuous power (apparent): 1,976 kVA, motor manufacturer: MWM Deutz, 4 units: Engine: MWM Deutz TBDG 441 BV16, dual fuel, gas, diesel, year 1993. Spare parts also available for sale, including turbochargers, injection pumps, cylinder heads, crankshafts, etc. 2 units: Generator: AVK 6600V 173A 50Hz, control unit. Laedpfx Aoy Hmhbsbyog

Condition: good (used), Year of construction: 1998, operating hours: 1,329 h, fuel type: diesel, motor manufacturer: Yanmar, Field of application: Construction Drive: Wheel Empty weight: 3.380 kg Number of owners: 1 Technical condition: good Visual appearance: good Drill equipment: Tank, Control Panel, Steel canopy Laodpsygwfiefx Abyeg Production country: NL Please contact Michael Overmeer for more information = Additional options and accessories = - Control Panel - Steel canopy - Tank = Remarks = Atlas-Copco with 1.329 operating hours mounted on a trailer year of construction december 1998 with a hydraulically operated light tower (9 meters), hydraulic support legs and a hydraulic nose wheel. Changes and typographical errors reserved.

Condition: good (used), Ultrasonic sensor, ultrasonic sensor, ultrasonic generator, ultrasonic generator -Manufacturer: Dukane, iQ Aim ultrasonic generator -Type: 20HB260-2P-C3 -Number: 12x generator available -Price: per piece -Dimensions: 430/265/H140 mm -Weight: 12.2 kg/pc. Ledpfx Absxt E A Ieyjag

Condition: excellent (used), Servo motor, geared motor, electric motor -Manufacturer: Nucleus, servomotor with gearbox from lowering unit for ultrasonic welding machines -Type: NuDC42I25R1000 Laodpfjxyhpkox Abyog -Item No.: DC441100 -Voltage: 24 V -Shaft: Ø Ø 8 x 22 mm -Number: 4x geared motors available -Price: per piece -Dimensions: 175/70/H42 mm -Weight: 0.7 kg/pc.

Condition: good (used), Year of construction: 2012, fuel type: diesel, General information Field of application: Construction Weights Ledpfxox H Nlij Abyoag Empty weight: 2.172 kg Functional Generator capacity: 60 kVA CE mark: yes Condition Technical condition: good Visual appearance: good Other information Fuel consumption: Diesel Delivery terms: EXW Water tank volume: 390 l Additional information Please contact Christian Theißen for more information Manufacturer: SDMO Model: R66C2 Year of build: 2012 Condition: Used Data: Performance: 60 kVA Engine: John Deere Length: 234 cm Width: 108 cm Height: 190 cm Tank capacity: 39 l / Diesel Required connection: 2x 230 V/16 A, 1x 380 V/16 A, 1x 380 V, 63 Ao. Klemmleiste. Drive type: Diesel Operating noise: 88 dB Own weight: 2.172 kg Weight: betankt 2.500 kg Own weight: 2.172 kg Special features: Lifting eye, consumption of approximately 14.75 liters per hour. On Weijer trailer. Location: 41468 Neuss immediately available

Condition: used, functionality: unexamined, Ferwood Code: RS0002834 - Manufacturer Code: 10680775 - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer an overhaul service. Please contact us. 12 kg - 46 x 39 x 27 Lajdpfx Abeyb Sl Hsyog

Condition: used, functionality: unexamined, Ferwood Code: RU0011862 - Manufacturer Code: 4-070-01-0901 - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer overhaul service, please contact us. 9KG, 46X39X27 Ljdpsylbccefx Abyoag

Condition: used, functionality: unexamined, Ferwood Code: RS0002835 - Manufacturer Code: SF57DRE90L4/TF/Z - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer an overhaul service, please contact us. 42KG - 70X46X34 Lsdpfx Abjyb Smqoysag

Condition: used, functionality: unexamined, Ferwood code: RU0010348 - Manufacturer code: JS-EV040 - Condition: Used - Functionality: Not tested - Compatible machine: - If interested, we offer an overhaul service; please contact us. 10KG - 46X39X27 Lsdpeycfhqefx Abyeag

Condition: used, functionality: unexamined, Ferwood Code: RU0009426 - Manufacturer Code: - Condition: Used - Functionality: Not tested - If interested we offer a revision service, contact us. Lsdpov Hzvuofx Abyjag

Condition: used, functionality: unexamined, Ferwood Code: RU0009347 - Manufacturer Code: 31320008 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Laodpsv Hrpfefx Abysg

Condition: like new (used), functionality: fully functional, Ferwood code: RS0002955 - Manufacturer code: 4-070-01-2267 - Condition: As new (showroom item) - Functionality: Fully functional - Compatible machine: - If interested, we offer a refurbishment service, please contact us. 9KG 46X39X27 Ledpfjymdvhsx Abyoag

Condition: excellent (used), Year of construction: 2017, operating hours: 25 h, functionality: fully functional, overall weight: 2,300 kg, fuel type: diesel, continuous power (apparent): 126 kVA, For sale is a reliable backup generator suitable for factories, etc., with a powerful 126 kVA capacity to power numerous devices and machines. The FTP engine has undergone a thorough inspection, with oils and filters replaced, and is in fully working condition. The Mecc Alte generator produces up to 126 kVA. This unit was installed in a single hall and used only once for 3 hours! We can also perform custom installation on the generator and deliver it to the specified address! More information from the seller. Automatic operation system: Thanks to the built-in ATS system, the generator is in "standby" mode and is constantly ready for automatic start-up in the event of a power outage. The operating principle is simple: after a predetermined time from the moment of the power outage, the generator will start automatically; upon power restoration, the generator will shut down, switching back to the mains power. This solution is ideal for restaurants, offices, and manufacturing companies – anywhere where the generator serves as an emergency power source. Additional advantages include a) maintenance-free operation, b) no need for third-party intervention in generator operation, c) the fastest possible power restoration in the facility. ✔ Automatic battery charging ✔ Reliable starting ✔ Possible connection in single-phase and three-phase installations ✔ Mechanical lock Mecc Alte 126 kVA = 101 kW AC generator Manufacturer: English Mecc Alte Model: ECP 24 2S4 Fuel: Diesel Year of manufacture: 2017 – but never used. Serial number: 0002006067 Hour meter reading: 10 M/h Weight (kg): 2300 Lasdpfx Asv Rbt Uobysg IP: 23 Power: 126kVA CE marking: Yes Dimensions: Length (m): 2.3 m Width (m): 0.8 m Height (m): 1.6 m Note: The stated price is net and applies to export and for businesses. A significant discount is possible for individual customers – We invite you to contact us directly by phone to get your best price. ————— After price negotiations, we can provide a detailed video or perform a computer test or paint thickness measurement (for a serious customer) to ensure comfortable conditions for purchasing the equipment remotely. —————- Of course, we encourage you to visit for an inspection, but if this is not possible, this form of purchase will be available, guaranteeing a safe transaction. Additionally, the possibility of obtaining a technical warranty with unlimited mileage assistance. ————— THIS ADVERTISEMENT IS FOR INFORMATIONAL PURPOSES ONLY AND DOES NOT CONSTITUTE AN OFFER IN ACCORDANCE WITH ART. 66, § 1 OF THE CIVIL CODE. OUR COMPANY IS NOT RESPONSIBLE FOR MINOR ERRORS, INCOMPLETE INFORMATION CONTAINED IN THE ADVERTISEMENT, OR THE ADVERTISEMENT BEING OUTDATED.

Condition: used, Year of construction: 2023, max. wheel diameter 200 mm gear width 60 mm max. module 5 min. module 2 workpiece weight max. 6,0 kg total power requirement 4 kVA weight of the machine ca. 0,5 t dimensions 1,35 x 1,55 x 1,7 m Less used Gear deburing machine - 3-jaw chuck ZG 125 - One twist in 5- 120 sec. - After test maybe modil 1,25 possible - Working Unit 1, milling function Ljdozy Satepfx Abysag - Working Unit 2, brush function - dust collector - automatic mode

Condition: excellent (used), functionality: fully functional, fuel type: gas, output frequency: 50 Hz, motor manufacturer: Jenbacher, JGS 620 / 624 GS-N.L units are available, including refurbished units, in both generating set configurations (non-containerized) and containerized versions, with NEW containers and NEW accessories and fittings. Further customizations can be discussed. Lasdey Uk Dpspfx Abysg

Condition: new, Year of construction: 2023, functionality: fully functional, fuel type: gas, output voltage: 400 V, output frequency: 50 Hz, motor manufacturer: Jenbacher, NEW power plant equipped with a reconditioned generating set; two units available immediately. NEW container, NEW fittings, Dia.Ne XT4, and a fully overhauled generating set; overhaul report available. ECOMAX 15 G2P NGS with containerized Jenbacher JGS 420 GS-N.L 400V. Accessories and piping are partially visible and partially packed, as these are NEW systems. Drawings and engine data sheets are available. Option to switch to the EGHE 200°C + by-pass configuration. Further customization options are available and can be discussed. Ledpfx Ajz D H Hajbyoag

Condition: new, Year of construction: 2023, functionality: fully functional, fuel type: gas, output voltage: 400 V, output frequency: 50 Hz, rotational speed (max.): 1,500 rpm, motor manufacturer: Jenbacher, NEW power plant equipped with a refurbished generating set; two units are immediately available. NEW container, NEW fittings, Dia.Ne XT4, and a fully overhauled generating set; overhaul report available. Laedpoz D H Dlefx Abyjg ECOMAX 10 G2P NGS with a containerized Jenbacher JGS 320 GS-N.L 400V. Accessories and piping are partially visible and partially packed, as these are NEW systems. Drawings and engine data sheets are available. Option to switch to the EGHE 200°C + bypass configuration. Further customization can be discussed.

Condition: new, Year of construction: 2026, HOT AIR GENERATORS by wood model FABBRI F28 - F55CV - F85CV - F120CV - F240CV NEW machines in prompt delivery NEW PRICE LIST year 2026 WHILE STOCK IS STILL AVAILABLE I CAN GUARANTEE PRICE LIST year 2024 Super discount while stocks last 100% made in ITALY for heating sheds, warehouses, work and private environments Fuels: Wood - Chips - Paper - Cardboard CE marks: Yes volt. 220 single-phase ( model F28 and F55CV ) volt. 380 ( model F85CV - F120CV - F240CV ) CV models are equipped with an additional fan for smoke expulsion at the base of the flue model available : F28 . surface to be heated up to m2 100/150 F55CV . surface to be heated up to m2 300/350 F85CV . surface to be heated up to m2 450/500 F120CV . surface to be heated up to m2 650/700 F240CV . surface to be heated up to m2 1000 Laedef H Hlrjpfx Abyog Hot Air Generators are suitable for the combustion of wood and all solid fuels allowed by law Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic suspensions driven by one or more electric motors. Electric command and control panel - adjusting thermostat. Maintenance: Ordinary maintenance means the removal of the deposited ashes by opening the door. Once or twice a year, perform a general cleaning of pipes.

Condition: good (used), functionality: fully functional, Year of construction: 2019, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,524 mm, travel distance Z-axis: 350 mm, total length: 9,450 mm, total width: 2,240 mm, total height: 2,520 mm, For sale is a used Bodor P3 fiber laser cutting machine, manufactured in 2019. The machine is in good used condition and is ideal for professional use in metal and sheet metal processing. Bodor P3 Fiber Laser Cutting Machine – Manufactured in 2019 – Used Bodor P3 3D? / Fiber Laser Cutting System – Manufactured in 2019 Technical data: * Model: Bodor P3 * Year of manufacture: 2019 * Working area: 3,048 × 1,524 mm * Max. travel speed: 200 m/min * Max. acceleration: 4.0 G Lasdozylxvepfx Abyeg * Z-axis travel: 350 mm * Positioning accuracy: ±0.05 mm/m * Accuracy of repositioning: ±0.02 mm * Dimensions: approx. 9,450 × 2,240 × 2,520 mm * Table loading station: 3–60 kW, depending on the model The Bodor P3 impresses with its high cutting speed, precise positioning, and generous working area. An interesting machine for sheet metal processing, metalworking, contract manufacturing, and industrial production. Used machine – inspection possible by appointment. Transport, disassembly, and loading can be arranged upon request. Upon request, transport and loading can be organized throughout Europe for an additional fee. Prices exclude VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying/selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: good (used), Year of construction: 2004, Ref. -No.: 10612 Manufacturer: LIEBHERR Type: LC 3002 Year of construction: 2004 Type of control: CNC-Steuerung Control: LIEBHERR Storage location: Halberstadt Country of origin: Germany Serial no.: 30XX Max. Module: 30 mm Min. Module: 4 mm Max. Workpiece Diameter: 3000 mm ambient temperature: +15...+38 ° cutting speed: 25 - 250 m / min Milling head swivel angle: 0,001 ° Resolution accuracy: 0,1 Degree Workpiece table load: 300 kN Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 230 A Fuse in the supply line: 250 A Max. milling diameter spur gears/helical gears: 3.000 mm Laedpfx Abjzx Nyhjysg Further information: Suitable for internal and external gear cutting. The machine can be viewed by appointment.

Condition: used, Year of construction: 2004, workpiece diameter 125 mm module 4 control SIEMENS travel -x axis 105 mm travel -y axis 40 mm travel -z axis 500 mm workpiece diameter 17 - 39,5 mm workpiece height 6 - 15 mm Gear Honing Machine | GLEASON-HURTH - ZH 125 The machine is in very good condition. Laodpfx Abex Szm Aeyjg Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ZH125 | ZH-125

Condition: used, Year of construction: 1963, total height: 1,850 mm, total width: 800 mm, total length: 3,900 mm, Empty weight: 3.000 kg Lajdpfx Aboy Auy Rjyog Price: On request Stroke: 1500mm Capacity: 10t - Year: 1963 - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Power [kW]: 7.5 - Transport dimensions: 3900mm x 800mm x 1850mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum