Used Big Bag Emptying Station for sale (11,398)

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. Chedpfoy Urtfjx Ailea The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Complete saw line with infeed,ARI SKR 600 reducer, ARI KS 122 Saw, ARI BKR 600 2:nd reduser, ARI DS 70 multi rip and ARI KT 52 eding line with full scanner Codpfx Asikvl Rsiljha Full bottom floor for waste handling All electrical cabinets and hydraulics

Condition: excellent (used), mileage: 5,49,266 km, power: 250 kW (339.91 HP), first registration: 07/1995, fuel type: diesel, tire condition: 50 %, axle configuration: 8x8, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, total length: 9,000 mm, total width: 2,500 mm, total height: 3,500 mm, Year of construction: 1995, Equipment: ABS, differential lock, = Additional options and accessories = - 1 fuel tank - Armrest - Day Cabin - Drum brakes - Front suspension: Leaf - Hub Reduction - Hydraulics - Open roof - PTO - Rear suspension: Leaf - Sper - Thick Axles Cjdpfx Aiozqcnpeljha - Tipping hydraulics = More information = Tyre profile: 50% Brakes: drum brakes Suspension: leaf suspension Front axle 1: Differential lock; Steering; Reduction: hub reduction Front axle 2: Differential lock; Steering; Reduction: hub reduction Rear axle 1: Double wheels; Differential lock; Reduction: hub reduction Rear axle 2: Double wheels; Differential lock; Reduction: hub reduction Technical condition: very good Visual appearance: very good

Condition: excellent (used), mileage: 6,60,951 km, power: 427 kW (580.56 HP), first registration: 08/2016, fuel type: diesel, tire condition: 70 %, axle configuration: 6x4, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 7,500 mm, total width: 2,500 mm, total height: 3,800 mm, Year of construction: 2016, Equipment: ABS, air conditioning, differential lock, electric window regulation, fog lights, power mirror, retarder, = Additional options and accessories = - 1 fuel tank - 1 sleeping place - Airbag - Armrest - Front suspension: Leaf - Hub Reduction - Hydraulics - Night Heater - Open roof - PTO - Rear suspension: Air - Rotator - Sleeper cabin - Sper - Thick Axles - Toolbox Cedpfezp Uwmsx Ailoha = More information = Brakes: disc brakes Front axle: Steering; Tyre profile: 70%; Suspension: leaf suspension Rear axle 1: Double wheels; Differential lock; Tyre profile: 70%; Reduction: hub reduction; Suspension: air suspension Rear axle 2: Double wheels; Differential lock; Reduction: hub reduction; Suspension: air suspension Crane: TAJFUNLIV L300K Technical condition: very good Visual appearance: very good

Condition: excellent (used), mileage: 5,38,898 km, power: 279 kW (379.33 HP), first registration: 03/2009, fuel type: diesel, tire condition: 50 %, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: semi-automatic, emission class: euro5, suspension: steel, total length: 8,500 mm, total width: 2,500 mm, total height: 3,500 mm, Year of construction: 2009, Equipment: ABS, air conditioning, crane, differential lock, electric window regulation, fog lights, = Additional options and accessories = Chedpfx Aezp Uv Noilja - 1 fuel tank - Airbag - Armrest - Central lubrication - Day Cabin - Disc brakes - Front suspension: Leaf - Hub Reduction - Hydraulics - Open roof - PTO - Radio - Rear suspension: Leaf - Sper - Thick Axles - Tipping hydraulics = Remarks = Crane Number of hydraulic extensions: 2 Clamshell bucket: ✓ = More information = Technical information Number of cylinders: 6 Engine capacity: 11.705 cc Axle configuration Tyre profile: 50% Brakes: disc brakes Suspension: leaf suspension Front axle 1: Steering Front axle 2: Steering Rear axle 1: Double wheels; Differential lock; Reduction: hub reduction Rear axle 2: Double wheels; Differential lock; Reduction: hub reduction Functional Crane: HMF 1643, behind the cab Tipper: Left / Back Condition Technical condition: very good Visual appearance: very good

Condition: excellent (used), Professional mobile tank for storage and distribution of diesel fuel/light heating oil from the renowned German company Rietbergwerke GmbH & Co. KG. Robust galvanized steel construction, designed for transport by forklift. The tank is equipped with a 24V electric pump from HORN GmbH and a fueling nozzle. Ideal for: • Agricultural operations • Workshops • Transport companies • Construction sites • Fuel storage for machinery and equipment Technical specifications: • Manufacturer: Rietbergwerke GmbH & Co. KG • Tank capacity: 250 L • Year of manufacture: 1993 • Hazard class: A III Cjdoy Nm Rnopfx Aileha • Test pressure: 3 bar • HORN GmbH fuel pump • Pump power supply: 24V • Power: 132 W • Current: 5.5 A • Maximum pumping height: 6 m • Suitable for diesel fuel and light heating oil • Fueling nozzle + hoses • Protective housing • Forklift-transportable • Galvanized steel construction Condition: Used item. Shows normal signs of use according to age and operation. Visual condition and completeness as shown in the photos. Included: • 250L tank • 24V pump • Hoses • Fueling nozzle • Transport frame.

Condition: excellent (used), For sale: a complete set of professional measuring stations from the renowned German brand ULTRA Germany, models: • ART. 27484-032 – POS. 12 • ART. 27484-033 – POS. 10 • ART. 27484-030 – POS. 8. The devices are designed for precise positioning, inspection, and calibration of mechanical and measuring components in production and quality control processes. An ideal solution for measurement laboratories, quality departments, research centers, or tool shops requiring high repeatability and accuracy. • Construction made of high-quality steel and aluminum – robust, stable, and durable • Precision linear guides ensure smooth movement and high measurement accuracy • Height adjustment and holder locking for quick adaptation to the tested component • Capability to mount dial indicators, holders, and other measuring accessories • A reliable solution for series measurements and part positioning in production processes. Condition: used, in very good technical and visual condition – devices are fully functional, sourced from a quality control department. Price refers to Chodpexltn Aofx Ailja

Condition: excellent (used), For sale: a robust, double-station bookbinding/printing press from the renowned German manufacturer Karl Tränklein K.G., Maschinenfabrik Stuttgart – Schönaich. This machine was previously operated by the public sector unit Stadt Fürth (Germany), which ensures it is complete and well-maintained. The device is equipped with two independent workstations, a heavy-duty upper beam, and pressure adjustment via lever arms. The lower housing contains the mechanical and electrical systems; power is supplied through a 16A CEE connector (400V). The machine is mounted on wheels for easy mobility. Application This press is suitable for bookbinding, printing, modeling, technical works, and any applications requiring even pressure over a larger area. Ideal for book blocks, covers, laminates, paper and cardboard elements, and other materials that require pressing or stabilization under pressure. Technical condition Chjdpfxsxzu Rqj Ailea – Complete unit – All levers and mechanisms function correctly – 400V power supply, CEE 16A plug – Mobile design on wheels – Normal signs of use visible in photos – Machine is ready for operation Manufacturer: Karl Tränklein K.G. Country of manufacture: Germany (Made in Germany)

Condition: new, Year of construction: 2023, Transformer substation, concrete construction, UF2742 Dimensions (L × W × H): 2.70 m × 4.18 m × 3.32 m Medium-voltage switchgear, Siemens 8DJH type • 2 ring cable feeder bays • Auxiliary switch • Short-circuit indicator • Capacitive voltage indication system Cedpeznmuhofx Ailjha • 1 transformer feeder bay • Auxiliary switch • Overcurrent and earth-fault protection with WIC relay • Capacitive voltage indication system Three-phase oil transformer • Type: SBG • Power: 1,250 kVA • Hermetically sealed design

Year of construction: 2023, condition: excellent (used), Professional pneumatic device for emptying SEMCO 600 ml cartridges and containers, designed for industrial applications (adhesives, sealants, pastes, high-viscosity materials). Manufacturer data: • Manufacturer: axiss GmbH (Germany) • Type: 9110 / B-SEMCO600-PN-KM-F Chedpfx Aisyc Nzujloa • Year of production: 2023 • Serial number: 514 • Quality standard: DIN EN ISO 9001:2015 • CE marking Technical description: • Pneumatic emptying of SEMCO 600 ml cartridges • Robust construction on an aluminium profile mounting plate • Piston assembly with transparent sleeve (position control) • Pressure regulator with pressure gauge • Directional control valve • Pneumatic quick couplings • Shut-off valve (safety) • Vertical or horizontal mounting possible • Smooth and controlled operation

Condition: ready for operation (used), Year of construction: 2004, A HD Wiegetechnik multihead weigher with a Deltapack vertical form fill and seal machine is available. 1) HD Wiegetechnik HDW 10 3.5 multihead weigher, year of manufacture: 2004, hopper volume: 3.5l/head, weighing heads: 10, controller: MD 400 E. 2) Deltapack DE 420 FU vertical form fill and seal machine, year of manufacture: 2004, max. film width: 740mm, longitudinal seal length: 540mm, cross seal length: 430mm, sealing jaw width: 450mm, machine dimensions X/Y/Z: approx. 2300mm/1550mm/1800mm. Documentation available. An on-site inspection is possible. Csdsznx Hvspfx Ailjha

Condition: new, Year of construction: 2025, functionality: fully functional, Sales only within Germany and Austria!!! Ulma FM 300 C X (WASH DOWN VERSION) The ULMA FM 300 C X was designed to package fresh food in a protective atmosphere (MAP) using barrier film (BDF). This machine produces hermetically sealed "pillow packs" which are then shrunk in a hot air tunnel. Technical specifications Model: FM 300 C X Condition: New Year of manufacture: 2025 Performance: Up to 70 packs/minute (depending on film and product characteristics) with MAP. Packaging type: Barrier shrink film pouch Machine equipment Length of infeed conveyor: Free infeed section 2490 mm Chjdpfx Ajzntrtjilea Equipment features ✅ Machine in wash-down version ✅ Motorized film roll holder (max. film width 900mm) ✅ Film end sensor ❌ Double film roll holder ✅ Motorized film roll holder (max. film width 700mm) ✅ Machine suitable for barrier shrink film and laminated film ✅ Sealing bar with double teeth for mono films ✅ Independent compression sponge for controlling the package volume ✅ "No product / No bag" function ✅ Synchronization signals for upstream and downstream equipment ✅ Gas analysis device Dannsensor MAP Check 3 O2 & CO2 gas save Documentation & Operation Language (documentation & HMI): German (other languages available upon request) Dimensions & Weight External dimensions (L × W × H): 6,105 × 1,465 × 2,060 mm Shipping weight: 1570 kg (including transport packaging)

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, filter area: 512 m², volume flow: 50 m³/h, total width: 2,450 mm, total length: 8,500 mm, total height: 9,000 mm, warranty duration: 12 months, Equipment: documentation/manual, BAG FILTER - GALVANIZED STEEL STRUCTURE AIRFLOW RATE m³/h 50,000 FILTER FABRIC CLEANING VIA AIR JET WITH CONTROL UNIT FILTER FABRIC AREA m² 512 No. 04 ATEX-CERTIFIED ANTI-EXPLOSION PANELS Csdpfszfiy Isx Ailjha FILTERED MATERIAL DISCHARGE - SCREW CONVEYOR - ROTARY VALVE UPPER GUARDRAIL - SAFETY LADDER CONTROL PANEL No. 01 ELECTRIC FAN - kW to be defined with the user

Condition: excellent (used), functionality: fully functional, machine/vehicle number: C-13-309-02, input voltage: 400 V, overall weight: 900 kg, Take the opportunity to purchase a high-quality used Carat grinding & polishing station: This set consists of a control cabinet and two precision polishing machines, equipped with robot connection for maximum efficiency. Ideal for professional applications in the industry. Matching robots can be offered separately. Year of construction: 05.2013 Total height: 240 cm Chsdpfxouzycts Ailoa Air pressure: max. 6 bar Rated current: 11.5 A Rated power: 5.5 kW Scope of delivery: 3 pallets with 2 polishing machines & 1 control cabinet

Condition: excellent (used), mileage: 4,27,764 km, power: 279 kW (379.33 HP), first registration: 07/1995, fuel type: diesel, tire condition: 50 %, axle configuration: 6x6, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, total length: 7,500 mm, total width: 2,500 mm, total height: 3,500 mm, Year of construction: 1995, Equipment: ABS, differential lock, = Additional options and accessories = - 1 fuel tank - Armrest - Day Cabin - Front suspension: Leaf - Hub Reduction - Hydraulics - Open roof - PTO - Rear suspension: Leaf Chsdpfjzph Tbex Ailoa - Thick Axles - Tipping hydraulics = More information = Tyre profile: 50% Brakes: drum brakes Suspension: leaf suspension Front axle: Differential lock; Steering; Reduction: hub reduction Rear axle 1: Double wheels; Reduction: hub reduction Rear axle 2: Double wheels; Differential lock; Reduction: hub reduction Technical condition: very good Visual appearance: very good

Condition: good (used), functionality: fully functional, Year of construction: 2019, Used container unit, dry, watertight, already disassembled. - Year of manufacture: 2019 - Consisting of 5 x 20-foot containers = approximately 75 m² Dimensions per container: Length: 6.00 m Width: 2.50 m External height: 2.80 m Internal height: 2.50 m Insulation: Wall: 100 mm Floor: 100 mm Cjdpfx Aiozn H Nrslsha Ceiling: 100 mm Equipment: - Entrance door - Double-leaf door - Reinforced floor - Mobile air conditioning unit - Plastic windows with insulating glass, some with tilt-and-turn function - Electric heaters - Continuous parapet - Sealing strips - Wall cladding - Ceiling cladding - Container clamps The PVC flooring is dirty and needs to be partially re-glued. Loading and transport can be arranged. Only serious and legitimate inquiries will be answered, including the following information: name, email address, and telephone number.

Year of construction: 2015, condition: excellent (used), Reportedly very little used Plümat model BFL 851 automatic machine to fill and close flexible pre-sterilized IV-Bags under pharmaceutical conditions. Made in 2015, the line consists of frame with safety guard, manual bag feeding, printing station, automatic bag infeed, tube cutting station, filling station, tube welding station, tube cooling station, bag outfeed, control cabinet. The filler is a linear single lane system. The system is in compliance with GMP and FDA standards. - processable bag formats (2 tubes = free tube length 30 mm presealed with Vial stopper & 40 mm sealed by welding or open tube): 100 ml, 250 ml and 500 ml - capacity: 100 ml / 250 ml / 500 ml = 600 bags/hour - filling accuracy: 100 ml = ± 2.0 %, 250 ml = ±  1.0 % and 500 ml = ±  0.7 % - dosage range: 100 ml - 1000 ml - welding method used: heat contact welding - filling system: SIEMENS S7 including counter card with mass-flow measuring system and pneumatic filling valves - controller: SIEMENS S7 Microbox with Profibus DP and TP 1500 touch terminal - power supply: 5.5 kW, 230/380 V, 50 Hz Chodpfxolhqndo Ailoa - compressed air supply: approximately 700 l/min, min 6 - max 8 bar - cooling water supply: approximately 4 l/min, temperature 18-21°C - weight: approximately 1350 kg (net) and 1750 kg (gross) - dimensions: 4263 (length) x 1050 (width) x 2140 (height) mm

Condition: excellent (used), Year of construction: 1996, MACHINE FOR PRODUCTION OF BLOCK BAGS Brand: MAC (ITALY) Csdpfxszlahps Aileha Description: machine for producing BLOCK bags with automatic break, year 1996, servo motors, automatic change of length, unwinding rolls with automatic brake 170 mm, longitudinal var with automatic thermoregulation, prefaltac for four runways (runway photocells each separately), head of brewing 120 mm station to handle and automatic stacking Bag with automatic clip, capacity 160-200 beats per minute x 4 lines Machine is in very good condition!

Condition: excellent (used), Year of construction: 1996, S.R.A RC 2000 ITALY Chedpfxjzladdj Ailea YEAR 1996 MAX working WIDTH 2000 mm

Condition: new, functionality: fully functional, Features of the Unit 1. Chain conveyor belt, 2 meters in length (other lengths available on request) Chodpfeydqahox Ailea 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotative end sealing unit, double sealing jaw 5. Robust, central fin seal structure 6. Three servo-controlled drives 7. HMI control panel 8. Two individual temperature controllers 9. Housing made of 304 stainless steel 10. Documentation in the local language 11. Print mark control 12. Programmable bag length 13. Standard running direction: left to right Technical Specifications 1. Product length: L90–300 mm 2. Product width: W30–160 mm 3. Product height: H5–55 mm 4. Packaging speed: up to 125 products/min (depending on product, bag length, material, and number of sealing jaws) 5. Maximum film width: 370 mm 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 6.5 kW 8. Machine weight: approx. 400 kg 9. Machine dimensions: approx. 3500 x 950 x 1450 mm

Condition: excellent (used), functionality: fully functional, Factory closure for mask production. Installed in 2021, out of operation since March 2022. The systems are already dismantled and ready for shipment. Cedpfjxqgffjx Ailjha

Condition: used, mileage: 3,84,700 km, power: 375 kW (509.86 HP), first registration: 06/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: air conditioning, navigation system, parking heater, * 12-speed automatic transmission * Electronic braking system (EBS) with ABS and ASR * Disc brakes on front and rear axles * Electronic parking brake * Secondary water retarder * Wheelbase: 3,700 mm * Comfort driver's suspension seat * Upper comfort bed, wide, adjustable * Lower comfort bed * Lower mattress, PremiumComfort * Shaving mirror Csdpfx Aioxnfpqsloha * Electrically operated sun blind, single piece * LED ambient lighting for driving and living * Standalone air conditioning system, electric * Automatic climate control * Residual heat utilization * Additional hot water heater, driver's cab * Additional cab insulation * Electrically operated sliding/tilting glass roof * Fleet Management System (FMS) interface * Trailer socket, 24 V, 15-pin * Illuminated Mercedes star * BigSpace cab, 2.50 m wide, flat floor * Lockable air deflector with end flap * External transparent sun visor * Air horn * MirrorCam * Central locking system * Comfort locking system * Light sensor * Rain sensor * Predictive Powertrain Control (PPC) * Mercedes PowerShift 3 * Driver's seat heating * Tyres: 315/70 R 22.5 * Rear axle tyres: 315/70 R 22.5 * Air suspension, rear axle * Navigation system * 570-litre fuel tank * 60-litre AdBlue tank * 430-litre fuel tank * Automatic high/low beam and cornering light * Engine: OM 471, inline 6-cylinder, 12.8 l, 375 kW (510 hp), 2500 Nm * Euro 6 D emission standard * High Performance Engine Brake * Safety Pack * Chrome interior package * Climate Package * Comfort Package * Electronic Stability Program (ESP) * Lane Keeping Assist * Distance Assist * Attention Assist * Traffic Sign Assist * Active Brake Assist 5 * Driver airbag * Cruise control * Actros model generation 5 * Refrigerator drawer under bed * EBS * Without spare wheel ----Sale only to commercial customers! No guarantee for the details! Subject to prior sale! Our general terms and conditions apply exclusively! We are happy to provide you with a leasing or financing offer.

Condition: used, Year of construction: 1991, offer consists of: Horizon AC-8000 S air- suction collator with 8 bins - Format: max: 318x470mm, min: 148x210mm - missfeeding-, doublefeeding and jamming control - integrated jugger - bin pile height: 10cm - paper weight: 23-210g/qm - pile height: 10cm/bin - capacity: up to 2400 cycles/hour - dimension: 165x65x207cm - weight: 510kg Cedjzhlrljpfx Aileha - power: 3-phase 400 Volt We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Year of construction: 2009, condition: ready for operation (used), total width: 780 mm, total height: 1,600 mm, laser power: 20 W, product length (max.): 960 mm, number of axes: 3, This 3-axis Trotec Laser-Work-Station was manufactured in 2009. It features a powerful 20 W Nd:YAG / Pulsed Yb Fiber Laser with a marking field of 110 × 110 mm and a Z-axis travel of approximately 400 mm. The machine is designed for various applications including laser marking, engraving, and part identification. If you are looking to get high-quality laser marking capabilities, consider the Trotec Laser-Work-Station machine we have for sale. Contact us for further details. • Machine Type: Fiber Laser Marking Machine • Model: Laser-Work-Station • Laser System: SpeedMarker FL20 • Laser Type: Nd:YAG / Pulsed Yb Fiber Laser • Wavelength: 1064 nm • Laser Power: 20 W • Laser Safety Class: Class 2 (Enclosed Workstation) • Marking Head: Galvanometer Scan Head • Lens: F-Theta 160 mm • Marking Field: 110 × 110 mm • Working Distance: Approx. 200 mm • Focus Diameter: Approx. 40 µm • Pulse Frequency: 20–80 kHz • Pulse Width: Approx. 100 ns (@ 20 kHz) • Maximum Pulse Energy: 1 mJ (@ 20 kHz) • Beam Quality: M² ≤ 1.5 • Z-Axis: Electric • Z-Axis Travel: Approx. 400 mm • Maximum Workpiece Height: Up to 250 mm • Work Area: Approx. 400 × 400 mm • Worktable: T-Slot Plate • Automatic Safety Door • Dual Laser Pointer Focus Finder • Interior Workspace Lighting • Swiveling Monitor Arm • Operating Voltage: 230 V AC, 50/60 Hz • Total Power Consumption: < 500 W Csdpfx Aszibpieiloha • Laser Unit Power Consumption: < 300 W • Cooling: Air-Cooled • Fiber Delivery Cable Length: 2 m • Operating System: Windows XP Professional • Control PC: Industrial PC • Processor: Intel Pentium 4, 3.0 GHz • Software: SpeedMark • 24 V Digital I/O Interface • Supports Barcode Marking • Supports 2D Data Matrix Codes • Supports Text Marking • Supports Date & Time Marking • Supports Vector Graphics Import • Supports Bitmap Graphics Import • Suitable Materials: Steel, Stainless Steel, Aluminum, Brass, Gold, Coated Metals, Plastics, Ceramics • Applications: Laser Marking, Laser Engraving, Part Identification, Serialization, Barcode & Data Matrix Marking, Logo Marking, Industrial Traceability

Condition: used, mileage: 7,50,000 km, power: 345 kW (469.07 HP), first registration: 03/2002, fuel type: diesel, overall weight: 26,000 kg, gearing type: mechanical, emission class: euro3, Scania 124C First registered: 03/2002 Mileage: 745,000 km Manual transmission Chassis only 6x4 Full steel suspension Heavy-duty axle Please visit our website: ----German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/...?/... Roman We will gladly assist you with financing or leasing options. EU sales: net price upon presentation of company documents and VAT number. VAT deposit: €2,000 Our services for you: - Customs license plates - Export documents and EUR1 certificate - Worldwide transport - Overnight accommodation - Transfer from Munich Airport or Passau train station Cjdpozmcydsfx Ailsha