Used Bio-Gas for sale (4,321)

Condition: used, Year of construction: 2015, operating hours: 82,000 h, functionality: fully functional, type of input current: AC, power: 220 kW (299.12 HP), input voltage: 400 V, rotational speed (min.): 1,500 rpm, empty load weight: 12,500 kg, For sale: Biogas CHP unit (BHKW) Fully functional CHP unit in container (dimensions: LxWxH = 7x3x3 meters, excluding the rooftop fan, weight: 12.5 tons) The unit will be decommissioned once the two new CHP units are operational, approximately summer 2026. The CHP was operated under a service contract with IWK. The last major overhaul (turbo, pistons, liners, heads, catalyst) was carried out in May 2025 at 77,500 operating hours. Service is performed every 2,000 hours. The unit can be inspected on site and in operation. The CHP is sold as-is, without warranty, ex location. Gcodpfxox A A Sfe Ah Dsa Transport costs to be borne by the buyer.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: HE-PG378-B/964/140917 - kogeneracja, overall weight: 26,100 kg, fuel type: gas, output current: 682 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, continuous power (apparent): 500 kVA, total length: 12,190 mm, total width: 3,000 mm, total height: 3,300 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Perkins, type of cooling: water, Gas / Biogas Power Generator Module / CHP HORUS type: HE-PG378-B equipped with a turbocharged PERKINS 4006-23TRS2 engine (module);\nYear of manufacture: 2023 (as stated on the HORUS-ENERGIA Sp. z o.o. manufacturer's nameplate);\nAt the Investor’s request and for an additional fee, the module can undergo a commissioning inspection, and comes with warranty and service provided by the manufacturer – HORUS ENERGIA Sp. z o.o. – for one year or up to 8,000 operating hours, depending on the Investor’s preference.\nRated electrical output: 378 kW (410 kW thermal output);\nModule manufacturer: HORUS-ENERGIA Sp. z o.o.;\nService history: (brand new unit);\nEngine hours: 0 (brand new);\nCurrently located in central Poland;\nThe generator set is installed in an enlarged 40 ft sound-attenuated container;\nContainer divided into three sections: control room, engine room, and a section for parallel operation with a second power source;\nEquipment: standard installation for combined power and heat generation + MUZG controller (Gas Mixing Supply System) + provisions for operation with a second power source (i.e., shaft for mechanical power extraction/input),\nFuel: natural gas / LNG (after regasification), biogas (from landfill, wastewater treatment plants, agricultural, or industrial biogas plants), mine gas (methane drainage), (Methane content: 30 Vol.% < CH4 < 100 Vol.% - methane content ranging from above 30% to below 100% by volume.);\nPerkins – technical data sheet available via the link below;\nManual + DTR (Technical and Operational Documentation) + further documentation (technical data) available upon request after email confirmation of purchase interest;\nPhotos of the genset + nameplate: available via the link below;\nGas / Biogas Generator Set / CHP unit is ideal for use as a primary or backup power source, for island operation setups, or in various types of businesses, such as CHP plants, heat plants, agricultural/landfill/waste/industrial biogas plants (e.g. wastewater treatment plants), mines extracting methane for energy use, industrial facilities requiring compressed air supply (working in tandem with compressor systems), or as a power generator for the electricity grid, in dairies, breweries, sugar factories, or applications requiring fuel flexibility. Gedpjw Ihudofx Ah Djca

Condition: excellent (used), Viessmann Vitoplex 700kw.Bj.2012, low temperature boiler, burner for biogas possible ,oil burner possible,Weishaupt ,on request in sea container with all accessories parts,pumps,chimney,controls,pipes . Gsdpfxjnqyxlj Ah Deca

Year of construction: 2011, operating hours: 1,05,992 h, condition: refurbished (used), functionality: fully functional, output frequency: 50 Hz, rotational speed (min.): 1,500 rpm, machine/vehicle number: 0280025/001, We offer a fully refurbished Stamford HC.I634H2-CG generator (500 kW / 860 kVA) designed for a biogas CHP (BHKW) unit. The generator was professionally overhauled and tested in 2025. General overhaul performed by Generam s.r.o. (Czech Republic) – authorized STAMFORD | AvK Parts & Service Dealer. A full refurbishment report is available. Technical data: - Power: 500 kW (860 kVA) - Manufacturer: Stamford - Type: HC.I634H2-CG Gsdpfx Ajxn Inijh Djca - Year: 2011 - Operating hours: not known - Voltage: 400 V / 50 Hz - Speed: 1500 rpm - Condition: completely overhauled (2025) - Application: biogas plant / CHP unit - Availability: immediately Documentation: Refurbishment report available. Inspection possible. Price: €22,000 net (negotiable) Location: 15320 Neuhardenberg, Germany

Condition: ready for operation (used), Year of construction: 2012, operating hours: 1,00,000 h, functionality: fully functional, machine/vehicle number: Vers. C25, fuel type: gas, power: 990 kW (1,346.02 HP), motor manufacturer: Jenbacher, 3x 1.0 MW biogas units (with Jenbacher J320), with approximately 100,000 operating hours. Virtually identical, all in the same configuration, version C25. No transformers or medium-voltage switchgear included. Excellent condition, maintenance provided by AB Group. Available from February 2026. Godpfx Ahor Ep N De Dsca

Year of construction: 2025, condition: new, machine/vehicle number: 020, Star screen for biogas plants for processing a wide variety of materials such as maize, sugar beet etc.. The screen deck is used for sugar beet after the crusher to separate oversized particles. Or before shredding to sort out foreign bodies and to protect the shredding machine, e.g. with maize. We offer different lengths, shaft numbers and grain sizes. This depends on the material and the throughput rate. Delivery times approx. 20 weeks Gedjbytafspfx Ah Deca

Condition: good (used), Year of construction: 2015, operating hours: 48,730 h, functionality: fully functional, Complete biogas generator set, including GE Jenbacher biogas engine and Leroy-Somer generator. The complete biogas generator set was newly installed at the current location in 2015. Current hourly rating is 48730 hours. Full maintenance history available. Characteristics Generator: Leroy Somer, LSAC 50.2 VL10 Power 889 kW Gcjdpfjvvacxjx Ah Dea Voltage 400 V, 50 Hz

Condition: used, SLA5800 Biotech - MFC - Digitally controlled mass flow controller for gas, Mass Flow Controller Gcedpfxeuqgbyj Ah Dja elastomer-sealed mass flow controller, flow control, flow meter, flow controller, thermal mass flow BROOKS INSTRUMENT Type SLA585081BAB1A2S1 Ser. No. 01C00500222 Year of manufacture 2020 (new / unused in original packaging) SLA5800 Biotech series Option package Biotech Premium Packet Code T Mains connection 13.5 - 27 VDC (plug M8, 5 pin, male) Power consumption max. 10 watts PROFINET interface (2x RJ-45) Visual display 2 LEDs (NET / MOD) Gas connection 6 mm Swagelok Valve design Normally closed User gas O2 (oxygen) Active - Multiple / O2 (oxygen), N2 (nitrogen), CO2 (carbon dioxide), AIR (air) Calibration gas N2 (nitrogen) Flow control ranges (full scale) 20000 sccm (20 liters / minute) Maximum inlet pressure 4500 psi (300 bar) Normal operation Pressure differential 60 psig (4 bar) Control range 2% to 100% of full scale (range of mechanism) Typical accuracy from 20 to 100 % ± 0.9 % of set point for 20 to 100 % of full scale Typical accuracy from 2 to 20 % ± 0.18 % of full scale for 2 to 20 % of full scale Repeatability ± 0.2 % of the measured value Resolution 0.1 % of full scale Typical response time of the controller

Year of construction: 2014, condition: used, Power: 4 kW (5 HP) Manufacturer : Bio Inox Year : 2014 Type : Reactor / process vessel Material : stainless steel ATEX Classification: Ex II Gc Agitation : Disperssion disk Power : 4 KW Godex Arz Ajpfx Ah Dsca Pneumatic valve + Electrical position indicator Possibility of stirring the bottom of the tank 0.55 Kw. ( Mixing device not mounted). Light for inside   Vessel : Capacity: 900L Maximum operating pressure: +50 / -5 Mbar Maximum operating temperature: 100°C Minimum operating temperature: 5°C   Jacketed : Capacity: 10 + 12L fluid : liquid / 2 Max working pressure: 3 bar Maximum operating temperature: 95°C Min operating temperature: -2°C

Condition: excellent (used), Year of construction: 1991, We can offer you CO2 carbon dioxide gas used storage tank vessel Gcodpjk Eac Djfx Ah Doa Volume 21050L; Working pressure 22 bar; Export from EU We also have other tanks for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane We would also be pleased to prepare an offer for you or provide you with further information. To discuss the possibilities, please contact us by phone or e-mail.

Condition: ready for operation (used), Output Voltage: 5–250 V; Current: 0.01–3.0 A; Power: 1–300 W Type of Output Constant voltage, current, or power with automatic crossover Timer 1 min to 99 hr 59 min Display 2-line, 16-character backlit LCD Gjdjxzd I Ejpfx Ah Doca EMI CE Class A, tested at 230 V; TUV EMC certified Input Protection Fuse on hot and neutral Safety Features No-load, resistance change, ground leak, overload/short circuit, overvoltage, overtemperature protection Dimensions (W×L×H) 25 × 28.5 × 8 cm (9.8 × 11.2 × 3.1 in) Good working condition. Please check out our other listings as well.

Condition: ready for operation (used), COMPLETE KRONES PET BOTTLES ASEPTIC FILLING LINE FOR FRUIT JUICE/BEVERAGES AND SPRITZERS. SUITABLE FOR STILL AND CARBONATED PRODUCTS. YOM 2002-2007 CAPACITY: 0,5L x 36.000 BPH 1,0L x 30.240 BPH 1,5L x 25.200 BPH BOTTLE CLOSURES 28mm. THE LINE INCLUDES BOTTLE BLOWING, FILLING, LABELING, PACKAGING AND PALLETIZING: 1. Control unit: Ruland 2002, touchscreen, flash heating & CIP/SIP 2. Pasteur: Ruland 2002, tube heat exchanger, 1315 L supply tank, max. 21,800 L/h 3. Sterile tank: Roth 2002, 11,000 L 4. Carbonization: Roth/Ruland 2002, 2575 L, disconnected 5. Nitrogen system: Terboven/ISTE 2002 6. Hygienic center: Ecolab/Lang 2002, CAF, no PLC 7. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 8. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 9. CIP/SIP: Ruland 2002, 20,000 L/h, 1315 L supply tank 10. Cleanroom: Weiss 2002, ventilation/overpressure 11. Preform hopper: Dieterle 2002, MD3 12. Preform feeding: Tanner 2002, HFT 4730 / RGT 1624 13. Blow molding: Krones Contiform S16 2002, 16 stations, 1.0–20,000 b/h 14. Air conveyor: Krones 2002, automatic rail adjustment 15. Cap conveyor: Gassner 2002, 2 container positions, cap elevator 16–18. Filling machine: Krones CAF VODM 100 2002, injector (60), rinser (80), filler (100), capper (20), 1,0–20.000 b/h, 28 mm caps, still/carbonated 19. Label check: Krones 2002, incl. in Prontomodul 20. Bottle check: Krones 2002 21. Conveyor: Krones 2002, air blower before labeling 22. Labeling machine: Krones Prontomodul 2007, max. 35.600 b/h 23. Canmatic module: Krones 2007, paper labels 24. Contriroll module: Krones 2007, film roll 25. MHD coding: Videojet Excel/170i Godpexm Rwqefx Ah Deca 26. Shrink wrapper: Krones Variopak 2002, 0.5–36,000 b/h, carton feeder & film transport 27. Packaging conveyor: Krones 2002 28. Handle applicator: Twinpack MHTE 2002 29. Empty pallet magazine: Krones LPM 2002 30. Palletizing: Krones robot 3A loader 2002, 4,000 packages/h 31. Pallet conveyor: Krones 2002, transfer cart & turner 32. Empty pallet magazine: Krones LPM 2002 33/34. Pallet stretch wrappers: Franpak 2002, top sheet applicator 35. Tying machine: Bornbinder HB 2002 36. Pallet coding: Logopak EAN 128 2003 THE LINE IS STILL NOT DISMANTLING, EXCELLENT CONDITION. LOCATION - GERMANY.

Condition: excellent (used), BIO-CIRCLE Type: RWR 80L Auto KST Description: RWR 80 L KST fully automatic SPS parts washer The RWR units from Bio-Circle are the optimum solution for cleaning internal circulation systems without dismantling. The unit is space-saving, quiet and very easy to operate. Thanks to the completely closed system, there is no unpleasant odor from the cleaner or the dirty water. External dimensions → approx. 1200 x 800 x 1050 mm Power supply → 400 V 50 Hz plug 16A CEE 5p 6h Drain → 1 1/4" outlet Technical specification: Type of soiling: limescale, rust (mineral), oil, grease Quantity of parts: Individual parts, small series, small quantities Component geometry: Whole components (without disassembly) Seal of quality: Stainless steel, service package available Maximum filling capacity: 80 L Tank material: V2A stainless steel Electrical connection: 400V / 50 Hz Gcjdpfx Ajtqfbbsh Dea Heating: 4.5 kW Flow rate: 25 l/min Temperature (default setting): 60 °C Total weight of the cleaning system without tank filling: 180 KG Area of application: The RWR 80 L KST fully automatic PLC has been developed for the plastic injection molding sector and can be used wherever cooling channels (circulation systems, pipes) need to be cleaned. Application: Fill the RWR 80 L KST fully automatic SPS with Power Cleaner KST 2.0. As soon as the minimum fill level is reached and the system is switched on, the system starts to heat up. During the heating-up period, the system can already be connected to the tool via the two hoses. The 5-stage cleaning program and the flow direction change run automatically, after the instructions shown on the display have been confirmed. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: new, functionality: fully functional, Year of construction: 2025, actuation type: electric, Nitrogen Gas Production Capacity 30 Nm3/H Nitrogen Outlet Pressure 200 BARG Nitrogen Gas Purity % 99.999 Hourly Energy Consumption 42 kWh Gjdpfexrcausx Ah Doca Nitrogen Manifold Set 2 Pieces

Condition: used, This listing is for 1 of 2 Grant-Bio PHMP Thermo-Shaker Excellent temperatures uniformity across the platform/microplate (patented bi-directional heating of microplates) combined with variable speed and variable temperature produces the ideal thermoshaker for microplate incubations. Can be used with all types of standard depth microplates and offers three devices in one for maximum versatility and efficiency. A microplate thermoshaker A compact benchtop incubator without shaking A microplate shaker in cold or ambient temperatures Features Temperature setting range: + 25°C to 100°C Temperature stability ± 0.1°C, temperature uniformity ± 0.2°C due to the bi-directional heating system (platform and lid) Shaking speed: 250 to 1200rpm Gcsdexzgvfepfx Ah Dsa Rapid heat-up Continuous or timed operation, with alarm buzzer and automatic switch-off facility Choice of two models with capacity for two (PHMP) or four (PHMP-4) 96- or 384-well microplates The heated lid completely covers the flat heating plate to provide bi-directional heating and excellent temperature stability and uniformity, whilst preventing condensation Combination of bi-directional heating and powerful orbital shaking capability produces the maximum yield from incubations Very easy to operate, with simple set-up of temperature, shaking speed and time via push buttons and the 2-line LCD status display Dimensions (h x d x w) - 125 x 250 x 265mm Temperature range - +25 to 60°C Temperature control range - Ambient +5 to 60°C Stability - 0.1°C Uniformity - 0.25°C Display - 2 line x 16 character LCD Shaking speed - 250 to 1200rmp Speed setting resolution - Increment 10rpm Average heat up speed - 12 minutes from 25 to 37,35 minutes from 25 to 60 Maximum height of microplates - 18mm Capacity - 2 microplates Orbit diameter - 2mm Timer - (with auto-off and audible alarm) 1 minute to 96 hours (1 minute increment) External power supply - Input AC 120-230V, 50/60Hz Output DC 12V Power consumption - 40W (3.3A) Weight - 6.1kg

Condition: excellent (used), Cryogenic storage gas tank for liquid Oxygen (LOX), Argon (LAR) , Nitrogen (LIN) gas vessel Volume: 6640L Working pressure: 20 bar Export from EU We also have other tankers for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane Gcsdpfx Asihfk Ieh Dea We would also be pleased to prepare an offer for you or provide you with further information about other vessels. To discuss the possibilities, please contact us by phone or e-mail.

Condition: good (used), The Trans-Blot Turbo transfer system combines traditional blotting techniques with modern filter paper and buffers, allowing rapid transfer of proteins from gels to membranes with minimal preparation time. The system integrates a high amperage power supply that directs current between a built-in platinized titanium anode and a stainless steel cathode. This enables highly efficient and rapid transfer in as little as 3 minutes. The entire system is in a ready-to-use format that allows researchers to obtain their results faster and easier, with reproducibility that is difficult to achieve using traditional blotting methods. Rapid transfer — transfers mini or midi gels in as little as 3 min High throughput — can transfer 1–4 mini or 1–2 midi gels in a single run Greater transfer efficiency — higher transfer efficiency compared to other transfer methods Gcedsxzd E Dopfx Ah Doa Flexible design — allows user to customize transfer conditions and is compatible with traditional semi-dry consumables Environmentally friendly — environmentally safe consumables eliminate disposal cost Good working condition. Please check out our other listings as well.

Condition: good (used), Drum is 1.2 meter wide at its widest point and 60 cm deep. Gcsdpou Rr Dzefx Ah Dja

Condition: excellent (used), Year of construction: 2012, From the inventory of the Thuringian State Office for Consumer Protection, we are pleased to offer you this well-maintained "Chef-III" gel electrophoresis system from the global brand Bio-Rad, complete with all necessary accessories. The complete system was purchased in 2012 and has seen very little use. A total of only approximately 40 runs have been performed, which are documented accordingly in the equipment manual. All components have been regularly inspected and serviced and are in perfect optical and technical condition; there is no damage or malfunction whatsoever. The system consists of: Gjdpswf I Dzjfx Ah Doca - Power module - Chiller with chamber - Variable pump module - Cooler/cooling module - Accessories and documentation All components are in very good condition; as can be seen in the pictures, there are no visual or technical limitations or damage. Small scratches or discoloration are due to transport, but do not limit its use in any way. Shipping will be made within three business days after receipt of payment via an insured freight forwarder. You also have the option of picking up the device from us during regular business hours. The total weight of the system, including accessories and pallet, is approximately 100 kg. This sale is exclusively for commercial customers; you will, of course, receive a VAT invoice. Private buyers have the option of purchasing the device "on behalf of a customer." Direct commercial sales to private individuals are expressly excluded! The goods are sold excluding any warranty or liability for material defects. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of the seller's obligations, nor to any injury to life, limb, or health. For inquiries regarding prices or technical details, please contact us at the address provided.

Year of construction: 2008, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 346100, Machine SAR-1000-B-015 including accessories: ULT ASD 300 Ex extraction unit. The operating manual can be provided as a PDF. The machine is currently in the condition shown in the pictures. It can be placed on pallets for collection if required. The machine has been inspected by Schunk, who determined that the following spare parts are needed: - Z-axis - Bearings for Y1 and Y2 axes - Replacement of power cable, Hall sensor cable, and pneumatic hoses - X-axis brake - Extraction nozzle and extraction hose - Shuttle sensor (B4.3/E) - Tool holders (5 pieces) - Replacement of UPS - Hold-down brush - Bulb for signal lamp Gedpfxsxwvruo Ah Doca - Hold-down sealing ring, pneumatic cylinder, guide shaft and plain bearing bush, spindle retaining plate - External exhaust hose ULT - Table lift cylinder (?) According to Schunk, material requirements are approx. €16,000. As we are selling the machine as defective/in need of repair and have listed all known deficiencies, the item is sold under exclusion of any warranty or liability for material defects.

Condition: used, This listing is for a Bio-Rad PowerPac HC High-Current Power Supply. The unit is in full working condition and is ready for immediate release. Elevate your laboratory’s performance with the Bio-Rad PowerPac HC High-Current Power Supply, engineered specifically for high-current applications like western blotting and high-throughput electrophoresis. This robust power supply delivers exceptional reliability and precision, ensuring your experiments achieve optimal results every time. Key Features: Powerful Output: With an impressive output of 250 V, 3.0 A, and 300 W, the PowerPac HC is designed to handle demanding electrophoresis tasks effortlessly. Intuitive Controls: The fully adjustable voltage, current, and power settings allow for tailored configurations, while the two-line, 16-character LCD display provides clear visibility for easy programming and monitoring. Versatile Applications: Ideal for western blotting with Bio-Rad blotting cells and suitable for a variety of high-current applications, this power supply adapts to your laboratory needs. Gedpfxsxx Ai Ao Ah Deca Benefits: Enhanced Experiment Efficiency: The intuitive programming enables multistep methods and timed runs, allowing you to choose between constant voltage, current, or power output for maximum flexibility. Safety Features: Built-in protection against short circuits and excessive voltage incidents ensures the longevity of your equipment, giving you peace of mind during critical experiments. Real-Time Monitoring: Stay informed with real-time voltage and current monitoring, ensuring that your processes run smoothly and effectively. Choose the Bio-Rad PowerPac HC High-Current Power Supply for unparalleled performance and reliability in your laboratory. Experience the difference in your high-current applications and achieve the results you desire with confidence.

Condition: ready for operation (used), Year of construction: 2011, Gas semi-trailer cryogenic for LNG (Liquid methane). manufacturer: CRYOCAN EU registration. Year: 2011 Volume: 50,25 м3 Vacuum certificate Gcsdpfxjtulh Ie Ah Doa We have also other tankers for LIN, LOX, LAR, LNG und CO2, argon, oxygen, nitrogen and carbon dioxide, hydrogen We will be glad to answer your questions via Phone and E-mail

Condition: excellent (used), Used CHP Plant Manufacturer: Indop Year of manufacture: 2014 Fuel type: natural gas Electrical output: 50 kW Thermal output: 80 kW Operating hours: 28,901 h Engine type: MAN GAS ENGINE e0834 e32 (54 kW) Number of cylinders: 4 Available: 3 units Indop 50 kW at €13,400 each 2 units Indop 20 kW at €8,600 each Gcsdpewthzisfx Ah Dja 1 unit Energ-g 50 kW at €13,400 Test run possible.

Condition: used, Year of construction: 2004, fuel type: gas, weight max. in kg 2500 kg stroke 3050 mm Gcodpfx Ajr Dg H Ejh Doa fork length 1200 mm load centre 500 mm turning radius 2444 mm driving speed 22 km/h guage width vorne 1008 mm guage width hinten 932 mm weight of the machine ca. 3,64 t dimensions of the machine ca. 3,8 x 1,25 x 2,25 m

Condition: excellent (used), Year of construction: 1980, Cryogenic storage tank for liquid vessel Gcodpofz Diqofx Ah Dsa Oxygen, Argon, Nitrogen, Methane, Helium and Carbon dioxyde LIN, LOX, LAR, LNG, LHe und CO2, hydrogen. We would also be pleased to prepare an offer for you or provide you with further information about other vessels. To discuss the possibilities, please contact us by phone or e-mail.