Used Blocker for sale (20)

Condition: good (used), Year of construction: 2002, Functionality: fully functional, I sell a block machine for formatting scantlings into pallet blocks. Possible dimensions of blocks from 70 to 160. very good condition. Dqm0Rz

Condition: used, Year of construction: 2001, Built in 2001 Size max 320 x 250 mm min 260 x 180 mm Pile height max 330 mm min 80 mm Infeed height max 890 mm min 860 mm Wyotwx3 Speed max 900 Pack./h

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: VB-523, VBS Electrostatic blocking device For the alignment, pressing and simultaneous blocking (electrostatic charging) of loose packages for optimum stability and high transport safety Technical specifications Dimensions Overall height 1900 mm Overall width 1068 mm Length without protective tunnel 680 mm Inlet height 810 - 900 mm Dphxsv Outlet height 810 - 900 mm Total stack height max. 300 mm Product width 145 - 310 mm Product length max. 440 mm max. 480 mm, behind compensating stacker Cycle output max. 24 packs/min. Pneumatic connection values Air pressure min. 6 bar Air consumption max. 90 l/min, unlubricated, dry air Electrical connection values Voltage 230 V, 1 phase, neutral conductor, earth, 50 Hz Power 1 kW Fuse protection 16 A slow-blow Features Automatic format adjustment with servo technology Infinitely adjustable product stamp width Operation via touch panel

Year of construction: 2006, Condition: used, Gaemmeler KL 540 Compensating Stacker with attached blocking device VM 500 The compensating stacker KL 540 is equipped with the proven Gaemmerler LiftPack technology. The KL 540 is suitable for bundle heights up to 300 mm. Nummerous options allow to meet the individual customer requirements. Condition: cleaned and ready for production Technical Data: Cycle time ≥ 1,5 sec. (depending on the copy) ≥ 1,2 sec. with Servo pusher (depending on the copy ) Pagination 4 – 96 Heatset / Gravure Formats A 105 – 330 mm (with rear-eject 105 – 310 mm) B 140 – 500 mm D max. 560 mm Layer height max. 200 mm Bundle height max. 300 mm Weight: 1.500 kg approx. Gaemmerler VM500 blocking unit Cycle time: (approx. 6.7 sec) per pack with a pack height of 300 mm and a blocking time of 2 sec. The cycle time per pack increases when the blocking time is increased and the pack height is reduced. The cycle time is also strongly influenced by the output speed of the compensating stacker and thus by the product (surface, format). Qmt09 Sizes: Width: 140 to 500 mm - 5.5" to 19.7" Length: 105 to 330 mm - 4.13" to 13" Pile height: 55 to 400mm - 2.16 to 15.7" Inlet height: 890 mm - 35" Outlet height: 890 mm - 35" Connected load: 16A (2KW, 380/480 Volt, 3 phases, neutral) Air requirement: 1000 standard l/min, 6 bar; unoiled, dry air Weight: approx. 500 kg

Overall weight: 22,000 kg, maximum load weight: 16,300 kg, axe configuration: 2 axles, first registration: 07/2020, Condition: used, Technische Daten:* Achsenfabrikat: SAF, 11 Tonnen mit Trommelbremse * Weight: 22,300 kg * Nutzlast: 16,700 kg * Weight: 5,600 kg * Rahmenstruktur: Hochfestes SSAB, STRENX 700 Abmessungen:* Gesamtlänge: 11,915 mm * Height angle: 8,485 mm Ausstattung:* Bremssystem: EBS 2S 1M von Knorr-Bremse * Elektrikanlage: Full-LED, MultiLED II von Aspöck *Verstellbare Ladehöhe: Pneumatisches Ventil integraliert * Zubehör: * 4 Wheel Blockers *2 Staukästen im Schwanenhals * Elektrische Winde: Come Up, 8 Tonnen Kapazität, mit Fernbedienung und Kabelschalter Lade- und Sicherungstechnik:* Zurringe: 3 x 2 an den Plattform-Außenrahmen (Kapazität: 8 Tonnen) * Sides: Length 2,300 mm, Width 500 mm * Stoßstange: Ausziehbar auf 1,400 mm Qualität und Schutz:* Fahrgestellrahmen & Heckrampen: Tauchbad feuerverzinkt, Seitenteile lackiert * Bereifung: 4 Reifen (235/75 R 17.5, M+S, Continental) Cn8Ciny7N3 Zusätzliche Vorteile:* Guaranteeprogramm: 1 Jahr (europaweit gültig) * Inclusive COC-Zertifikat * Color: Blue

Year of construction: 2012, Condition: like new (used), CONTEC-KOMPRESORYCONTEC-KOMPRESORY BLOCKERDS DW17,2012 PRODUCTION YEAR,2012 EFFICIENCY 2,8M3/MIN. FULLY RIGHT.NET PRICE 3100,- GROSS PRICE 3813,- I HAVE MORE REFRIGERATION DEHUMIDIFIERS, SCREW COMPRESSORS AND WELDING EQUIPMENT ON SALE.MORE INFORMATION TEL. 603 244 888, 726 244 888.CONTEC-COMPRESSORS 80Gx9P

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: 2441, empty load weight: 63 kg, maximum load weight: 300 kg, Mobile tank, entirely made of stainless steel, Eurocont brand, year of manufacture 2005, impeccable technical and optical condition, gaskets in excellent condition, Series: 2441, weight 63 kg, operating pressure allowed: 1 bar; tested pressure 1.7 bar; negative operating pressure allowed: -0.15 bar, maximum operating temperature allowed + 130°C, this tank can work under pressure if a manometer is installed. Mobile stainless steel tank for various food and non-food liquids. volume 300 liters, diameter 800 mm, height 1,140 mm. The tank is on four rollers with blockers. It has 3 upper loading sockets: 100 DN with valve, 50DN and 20DN socket and lower DN 100 discharge/empty socket with closing lever and threaded cap. Sales price: 2.550 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / 3Xwio3Ct Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Overall weight: 22,000 kg, maximum load weight: 16,300 kg, axe configuration: 1 axle, first registration: 08/2022, next inspection (TÜV): 09/2025, Condition: used, BPW 10t axles, frame construction made of high-strength Domex 700, total loading area 11,800mm, length of loading area 8,350mm, Knorr brake EBS 4s/2k (ASR), folding rear support legs 25,000kg, pneumatic valve for adjusting the N.4 wheel blockers, Electric winch with remote control, 3x2 lashing rings in the platform outer frame (8to), Aluminium frame L: 2,300mm - W: 500mm, hot-dip galvanized, Tool box, Loading platform rollers, Extendable bumper, Ramp bracket Fdsmagfju

Condition: excellent (used), Year of construction: 2007, Laboratory foam dosing station with foam mixer and applicator Rb39Oox The system works in a similar way to the SUPRA MIX concept. Several chemicals are dosed and mixed with water and air in a controlled ratio. Recipes are stored on the controller and can be changed during operation. Foam applicator with mixer - Dynamic foam mixer with online dosing of 5 products + water - 5 dosing pumps - One direct inlet for mixing - Product monitoring for the chemicals - Air dosing valve - Dynamic foam mixer with adjustable speed - PLC control - Foam applicator - For one-piece carpets up to 1 m wide applications Stain blocker Dirt, water and oil repellents Fluorocarbons Antistatic chemicals Plasticizers Flame retardants Antibacterial chemicals Moth and beetle repellents Pile stabilizers Anti-hair loss agents Resins for wrinkle prevention and dimensional stability Specification Foam density: 20 - 100 g/l (higher density at lower flow rate) Dosing range: 0.5 - 500 g/l (1:100 with each pump) Foam volume: 50 - 500 l/min Electrical data Connected load: 6kVA, 10A Mains voltage: 400V / 50Hz Control voltage: 24V Dimensions HxWxD = 1400 x 2100 x 860 mm Year of construction: 2007 Purchase price: 47600 ,- € Further articles - new and used - can be found in our store! International shipping costs on request!

Year of construction: 2006, Condition: ready for operation (used), Muller Martini Tempo 22 saddle stitcher, year of manufacture 2006. Operating hours: approx. 33,700 / max. speed: 22,000 - 6x feeder 416 - 6x stream feeder 3738 with extension - 1 x feeder 344 Eltek Inoisioer device Semko lateral measurement control ASIR3 - 2x goods gluer 423 - 1x stitching unit 410 with 2 stitching heads - 1x reversible tape - 1x three-knife trimmer 304 - 1x Stacker Robusto 451 with Verblocker with hinged belt, year of manufacture 2012 Complete documentation and a large spare parts package MULLER MARTINI TEMPO 22 SADDLE STITCHER LINE, year of construction 2006 total hours in counter 33.700 / max speed 22.000 cycles - 6 feeders 416 - 6 stream feeders 3738 - 1 cover feeder 344 ASIR3 Bro997Ky0Ku - 2 sample gluers 423 - 1 stitcher unit 410, 2 pcs stitching heads - 1 trimmer unit 304 - 1 turning unit - 1 stacker Robusto 451, year 2012 - complete manuals - large collection of spare parts

Condition: good (used), Year of construction: 2006, Products Loose products, strapped/foil wrapped products (stacks should be in good shape); L28B2Fens Wire stitched thin products should be at least double the height of the wire and should be pressed neatly on the spine. Product width 140 - 300 mm Product length 200 - 430 mm Bundle height 50 - 300 mm Bundle weight max. 18 kg Pallet format 800 x 1200 mm Loaded pallet height max. 1600 mm incl. pallet Empty pallet height 130 mm (min.) - 150 mm (max.) Full pallet weight max. 1500 kg Weight per layer max. 280 kg Bundle offset max. 80 mm (Offset is possible with strapped or foil-wrapped products, with loose products, however, only to a certain limit.) Slip sheet Craft paper, air tight 200 g/m2, 700 x 1000 mm Speed max. 24 cycles/min. for loose products (only in combination with el.st. blocker VBS) max. 36 cycles/min. for strapped, foil wrapped products Drive Complete drive with 10 engines, total 6,5 kVA Voltage 380-420 V / 3/N/PE, 50 Hz Fuse 3 x 20 A, slow-blow fuse Air pressure min. 6 bar Air consumption max. 0,35 Nm3/min., unoiled, dry air Control Central control panel for automatic or manual operation incl. emergency stop Palletizing program Computer control with keyboard and monitor for user friendly programming incl. layer pattern generator, production control, standard ERP/MIS interfaces Max. floor loading 450 kg/m2

Overall weight: 35,000 kg, axe configuration: 3 axles, tire size: 385/65 r22.5, Condition: new, machine/vehicle number: 2dee9cc4124b79c4820f5c3cf, Further information Fine-grained steel welded construction, saddle plate with replaceable 2 , kingpin, outer frame slightly inclined new design with Load-Lock profile for tensioning strap attachment, 24 to. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation Note: Free support leg corner dimension or free swing-through radius to the rear approx. 1930 mm, pull-out ladder at the rear, door stop at the side, 2 wheel chocks with holder, Bsb0K3M8 Aluminium side collision protection, galvanized steel underride guard, quarter-shell mudguards in front of and behind axle unit, with anti-spray flaps in accordance with EC, impact protection at the rear SAF disc brake axles with 430 mm disc diameter, axle/chassis laser-measured Reduction in tire wear and fuel consumption, air suspension 2-line compressed air brake system, colored cable routing for easy servicing, spring-loaded parking brake, 2 swap-proof coupling heads at the front, without connecting cable, EBS, electronic brake system with EBS socket at the front, without connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS, with lift & lower valve, vehicle stability system 385/65 R22.5 tires of the manufacturer's choice, steel rims, factory silver 24 volt, multi-chamber lights, amber LED lighting at the sides, 2 white position lights at the front, 2 white/red lane departure lights at the rear, 2 x 7-pin interchangeable sockets at the front, without connecting cable, Floor: Screen printing plates approx. 30 mm thick, on longitudinal beams for high point load capacity for forklift axle load up to max. 7100 kg Front bulkhead / corner stanchions: 2,580 mm high, steel corner stanchions in volume design, release device for side tarpaulin on bulkhead, crash blocker, bottom inside at approx. 140 mm height with steel impact protection Center stanchions: 3 pairs of sliding stanchions can be moved along the entire length, with 4 insertion pockets and long pocket at the bottom, 3 pairs of stanchion positions Insertion slats: 5 rows of wooden insertion slats Rear wall / rear corner stanchions: Rear steel corner stanchions up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors, 2-leaf with 2 internal espagnolette locks each Tarpaulin: tarpaulin with welded horizontal and vertical straps, stainless steel tensioning fasteners Roof: Sliding roof, rear end lift can be folded up, with roof can be slid from rear to front, L-shaped roof rail for automotive industry, internal width between the roof rails, approx. 2,490 mm, tarpaulin color: white, 400 Roof non-elastic, hardly any deflection of the roof rail when loading and unloading, optimum rain strip at the rear, at the top of the end bows, above the doors Germany, test approval according to EC 2007/46, 24/7 service hotline, Fliegl manufacturer's certificate for structural strength according to EN 12642 XL, prepared for single-line license plate holder, warning sign according to ECE - 70, reflective strips: white, continuous on the side tarpaulins at the bottom and at the top in the corners (if visible drop sides, then the strip at the bottom, on the drop sides), reflective strips: red, all-round on the rear portal Frame DB 7350 nova grey, 10-year warranty against rusting through, support legs coated black, front corner stanchions hot-dip galvanized, front wall aluminium, rear corner

Condition: good (used), Year of construction: 2009, Products Loose products, strapped/foil wrapped products (stacks should be in good shape); Wire stitched thin products should be at least double the height of the wire and should be pressed neatly on the spine. Ost0Qhb0Fj Product width 140 - 300 mm Product length 200 - 430 mm Bundle height 50 - 300 mm Bundle weight max. 18 kg Pallet format 800 x 1200 mm Loaded pallet height max. 1600 mm incl. pallet Empty pallet height 130 mm (min.) - 150 mm (max.) Full pallet weight max. 1500 kg Weight per layer max. 280 kg Bundle offset max. 80 mm (Offset is possible with strapped or foil-wrapped products, with loose products, however, only to a certain limit.) Slip sheet Craft paper, air tight 200 g/m2, 700 x 1000 mm Speed max. 24 cycles/min. for loose products (only in combination with el.st. blocker VBS) max. 36 cycles/min. for strapped, foil wrapped products Drive Complete drive with 10 engines, total 6,5 kVA Voltage 380-420 V / 3/N/PE, 50 Hz Fuse 3 x 20 A, slow-blow fuse Air pressure min. 6 bar Air consumption max. 0,35 Nm3/min., unoiled, dry air Control Central control panel for automatic or manual operation incl. emergency stop Palletizing program Computer control with keyboard and monitor for user friendly programming incl. layer pattern generator, production control, standard ERP/MIS interfaces Max. floor loading 450 kg/m2

Axe configuration: 3 axles, tire size: 435/50 r19.5, Condition: new, machine/vehicle number: 8e6cf81e11b107f23f22f209a, Further information Fine-grained steel welded construction, with preload slight pretension in the neck area, saddle plate with replaceable 2 , kingpin, outer frame slightly inclined new design with Load-Lock profile for tensioning strap attachment, 24 to. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation Note: Free support leg corner dimension or free swing-through radius to the rear approx. 1930 mm, pull-out ladder at the rear, lateral door stop, 2 wheel chocks with holder, aluminium side collision protection, galvanized steel underride guard, quarter-shell mudguards in front of 1st axle and behind each axle, with anti-spray flaps according to EC, impact protection at the rear SAF disc brake axles, laser-measured axle/chassis to reduce tire wear and fuel consumption, air suspension 2-line compressed air brake system, colored cable routing for easy servicing, spring-loaded parking brake, 2 swap-proof coupling heads at the front, without connecting cable, EBS, electronic brake system with EBS socket at the front, without connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS, with lift & lower valve, vehicle stability system Clfsoj3Umz 435/50 R19.5 tires of the manufacturer's choice, steel rims, factory silver 24 volt, multi-chamber lights, amber LED lighting at the sides, 2 white position lights at the front, 2 white/red lane departure lights at the rear, 2 x 7-pin interchangeable sockets at the front, without connecting cable Floor: Screen printing plates approx. 30 mm thick, on longitudinal beams for high point load capacity for forklift axle load up to max. 7100 kg Front bulkhead / corner stanchions: 2,580 mm high, steel corner stanchions in volume design, release device for side tarpaulin on bulkhead, crash blocker, bottom inside at approx. 140 mm height with steel impact protection Center stanchions: 3 pairs of sliding stanchions can be moved along the entire length, with 4 insertion pockets and a long pocket at the bottom, 3 pairs of stanchion positions Insertion slats: 5 rows of wooden insertion slats Rear wall / rear corner stanchions: Rear steel corner stanchions up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors, 2-leaf with 2 internal espagnolette locks each Tarpaulin: Tarpaulin with welded-in horizontal and vertical straps, stainless steel tensioning fasteners Roof: Sliding roof, rear end lift can be folded up, with roof can be pushed from rear to front, L-shaped roof rail for car industry, internal width between the roof rails, approx. 2 490 mm, tarpaulin color: white, 400 Roof non-elastic, hardly any deflection of the roof rail when loading and unloading, optimum rain strip at the rear, at the top of the end bows, above the doors, EcoLift - lifting roof can be raised by approx. 380 mm, with gas pressure damper support, 3 driving positions at the front: interior height at the front approx. 2900 mm/ 2950 mm / 3000 mm, adjusted to approx. 3000 mm Germany, test approval according to EC 2007/46, 24/7 service hotline, Fliegl manufacturer's certificate for structural strength according to EN 12642 XL, prepared for single-line license plate holder, warning sign according to ECE - 70, reflective strips: white, continuous on the side tarpaulin at the bottom and at the top in the corners (if visible drop sides, then the strip at the bottom, on

Overall weight: 29,000 kg, empty load weight: 5,380 kg, maximum load weight: 23,205 kg, axe configuration: 3 axles, first registration: 03/2021, tire size: 435/50 r19,5, Condition: used, machine/vehicle number: d97bfb41327ce44dcbe8c5fc6, Further information Fine-grained steel welded construction, saddle plate with replaceable 2 king pins, outer frame slightly inclined with load-lock profile for attaching tensioning strapsNote! to attach the straps in conjunction with drop sides, the drop sides must be opened! 24 t. 2-speed support winch, single-sided operation, with semicircular lower section and straight connecting plate, with thrust compensation, extension ladder at the rear, door locks on the side, wheel chocks with holder Aluminium side bumpers, galvanized steel underride guard, quarter-shell mudguards in front of 1st axle and behind each axle, with anti-spray flaps behind each axle, heavy blocker rear bumper + side roller bumpers, 2 spare wheel holders for 1 e-wheel, with wheel fastening set, 1 spare wheel steel rim, 2 plastic toolboxes BPW disc brake axles, axle/chassis laser-measured Reduction in tire wear and fuel consumption, air suspension Csmm9Do0F2 2-line compressed air brake system, spring-loaded parking brake, 2 swap-proof coupling heads at the front, without connecting cable, EBS made by Wabco, electronic brake system with EBS socket at the front, without connecting cable, Attention: The trailer vehicle may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve, vehicle driving stability system, tire pressure monitoring system IVTM Wabco, via EBS, without truck installation (prerequisite for this must be given in the truck). 24 volt, multi-chamber lights, amber LED lighting at the side, 2 white position lights at the front 2 white/red lane departure warning lights at the rear, 2 x 7-pin and 1 x 15-pin interchangeable sockets at the front, without connecting cable Floor: Screen printing plates approx. 30 mm thick, cross joints with Omega inlay, on longitudinal beams for high point load capacity for forklift axle load up to max. 7,100 kg Front bulkhead / stanchions at the front: 2,580 mm high, steel corner stanchions in volume design, release device for side tarpaulin on bulkhead, Crash blocker, bottom inside at approx. 140 mm height with steel impact protection Middle stanchions: 3 pairs of sliding stanchions can be moved along the entire length, with 4 insertion pockets and long pocket at the bottom, 3 pairs of stanchion positions, aluminum insertion slats Rear steel corner stanchions up to lower edge of roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors, 2-leaf with 2 internal espagnolette locks each Tarpaulin with welded-in horizontal and vertical straps, stainless steel tensioning fasteners Customs rope all-round with holder on the bulkhead (no customs lock, not in conjunction with Quick Lock) Roof: sliding roof, rear end lift can be folded up, with roof can be pushed from rear to front, L-roof rail for automotive industry, internal width between the roof rails approx. 2,490 mm, tarpaulin color: white, EcoLift - lifting roof can be raised by approx. 380 mm, on both sides, with gas pressure damper support, 3 driving positions at the front: internal height at the front approx. 2,900 mm/2,950 mm/3,000 mm, adjusted to approx. 2,950 mm Optimum rain bar at the rear, at the top of the end bows, above the doors Germany, test approval according to EC 2007/46, load securing certificate according to EN 12642 XL (only valid in conjunction with 4 rows of aluminum slats), 24/7 service hotline, prepared for single-line license plate holder, warning sign according to EC

Overall weight: 35,000 kg, empty load weight: 6,115 kg, maximum load weight: 28,885 kg, axe configuration: 3 axles, first registration: 11/2015, tire size: 385/55 r 19,5, Condition: used, machine/vehicle number: a7d2a8dfe0e7c5ca8550173af, Further information 6 vehicles available - 6 vehicles available! - 6 vehicles available! - 6 vehicles available! - 6 vehicles available! Fine-grained steel welded construction, saddle plate with replaceable 2 kingpins, outer frame slightly slanted with load-lock profile for lashing strapsNote! To attach the straps in conjunction with drop sides, the drop sides must be opened! Pair of additional lashing eyes embedded in the outer frame, 2.5 tons each, outer frame with Load-Lock profile for attaching tensioning strapsNote! Cannot be used with drop sides! 24 t. 2-speed support winch, single-side operation, with semicircular lower section and straight connecting plate, with thrust compensation, telescopic rear support, mounted as high as possible, extension ladder at the rear, door locks on the side Wheel chocks with holder, aluminium side bumpers, galvanized steel underride guard, quarter-shell mudguards in front of 1st axle and behind each axle, with anti-spray flaps behind each axle, rear impact protection, heavy blocker rear transverse impact protection, pallet stop on both sides approx. 20 - 25 mm high, bolted design, loading height reduced by approx. 20 - 25 mm, plastic tool box, with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included), document box, storage box for fire extinguisher up to 6 kg, fire extinguisher (ABC powder 6 kg) SAF disc brake axles, hubodometer/kilometer counter, air suspension, 1st axle automatic lift axle, can also be operated electrically from the truck, with starting aid, without truck installation (with starting aid up to max. 25 km/h) Axle lift below the recomm. Driving height, therefore no warranty for tire damage 2-line compressed air brake system, spring-loaded parking brake, 2 interchangeable coupling heads and Duomatic connection at the front, without connecting cable, EBS made by Wabco, electronic brake system with EBS socket at the front, without connecting cable, Attention: The trailer vehicle may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve + auto-reset function, ride height in conjunction with lift axle, when the lift axle is raised, the loading or total height increases by 50 mm (with lift axle).total height increases by 50 mm (with Mega Flex only with low ride height or semi-mounted height), vehicle ride stability system 24 volt, 4 x 3 chamber lights + 1 round reversing light and + 1 round rear fog light, amber LED lighting at the side, amber LED lighting at the side with 20 LED diodes per light, 2 white position lights at the front 2 white/red lane departure warning lights at the rear, 2 x 7-pin and 1 x 15-pin interchangeable front sockets, without connecting cable, Cargobull TrailerConnect, as offered, supplied loose for self-assembly LED safelight, top in rear corner stanchions Screen printing plates approx. 30 mm thick, cross joints with Omega inlay, on longitudinal beams for high point load capacity for forklift axle load up to max. 7100 kg Front wall/front corner stanchions 2,780 mm high, steel corner stanchions in volume design, release device for side tarpaulin on front wall, Cnkd37S7Y bottom inside at approx. 140 mm height with steel impact protection 2 pairs of sliding stanchions can be moved over the entire length, without insertion pockets, 2 pairs of stanchion positions, rear wall/rear stanchions, rear steel corner stanchions up to lower edge of roof, attachment for tarpaulin with round tube

Overall weight: 35,000 kg, empty load weight: 6,927 kg, maximum load weight: 28,073 kg, axe configuration: 3 axles, first registration: 07/2016, tire size: 385/55 r19,5, Condition: used, machine/vehicle number: 5a722b71e07e463c6c5370ad2, Further information Fine-grained steel welded construction, saddle plate with replaceable 2 kingpins Note! With a frame neck height of 30 mm, the truck wheelbase must not exceed 3700 mm! Outer frame slightly slanted with Load-Lock profile for attaching lashing strapsNote! To attach the straps in conjunction with drop sides, the drop sides must be opened! Not in the neck area! 10 pairs of additional lashing eyes embedded in the outer frame, 2.5 tons each, outer frame with Load-Lock profile for attaching lashing strapsNote! Cannot be used with drop sides! 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation, folding supports at the front in front of the bulkhead can be extended outwards and folded down. Moved inwards as far as possible when driving. (for unhitching under load), without supports, pull-out ladder at the rear, door locks at the side, wheel chocks with holder, aluminium side collision protection, galvanized steel underride guard, quarter-shell mudguards in front of the first axle and behind each axle, with anti-spray flaps behind each axle, rear impact protection Heavy blocker rear transverse impact protection, heavy-duty pallet stop on both sides, approx. 20-25 mm high, with lashing option every 200 mm, loading height reduced by approx. 20-25 mm, plastic toolbox SAF disc brake axles, air suspension, without lift axle 2-line compressed air brake system, spring-loaded parking brake, 2 interchangeable front coupling heads, without connecting cable, EBS, electronic brake system with EBS socket at the front, without connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve, vehicle stability system 24 volt, multi-chamber lights, amber LED lighting at the side, 2 white position lights at the front 2 white/red lane departure warning lights at the rear, 2 x 7-pin and 1 x 15-pin interchangeable sockets at the front, without connecting cable Csmm3Nuhrs Floor: Front area steel floor with anti-slip coating, screen printing plates approx. 30 mm thick, cross joints with Omega inlay, on longitudinal beams for high point load capacity for forklift axle load up to max. 7100 kg, steel/ checker plate covering in the wheel area. Front bulkhead/front stanchions: 2,580 mm high, steel corner stanchions in volume design, release device for side tarpaulin on bulkhead, bottom inside at approx. 140 mm height with steel impact protection Middle stanchions: 3 pairs of sliding stanchions can be moved along the entire length, with 4 insertion pockets and long pocket at the bottom, 3 pairs of stanchion positions, aluminum insertion slats Rear steel corner stanchions up to lower edge of roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors, 2-leaf with 2 internal espagnolette locks each Tarpaulin with welded-in horizontal and vertical straps, stainless steel tensioning fasteners, customer lettering on rear portal Roof: sliding roof, rear end lift can be folded up, with roof can be pushed from rear to front, L-roof rail for automotive industry, internal width between the roof rails approx. 2,490 mm, tarpaulin color: white, EcoLift - lifting roof can be raised by approx. 380 mm, with gas pressure damper support, anti-ice system, with a hose in the middle, with automatic ventilation Approval country: Germany, test approval according to EC 2007/46, load securing certif

Overall weight: 35 kg, empty load weight: 6 kg, maximum load weight: 28 kg, axe configuration: 3 axles, tire size: 435/50 r19,5, Condition: new, machine/vehicle number: 068983c41e44eb5660fa9100c, Further information Chassis saddle forwarding Fine-grained steel welded construction, with preload slight pre-tensioning in the neck area, saddle plate with replaceable 2 kingpins X-tra Long, with 15030 mm internal length Outer frame slightly inclined new design with Load-Lock profile for tensioning strap attachment 24 to. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation Note: Free support leg corner dimension or free swing-through radius to the rear approx. 1930 mm Extension ladder at the rear Door retainer at the side 2 wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Quarter-shell mudguards in front of 1st axle and behind each axle Impact protection at the rear Axles + suspension SAF disc brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Air suspension Brake system 2-line compressed air brake system Colored line routing for easy service. Spring-loaded parking brake 2 interchangeable clutch heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system AAC Basic, automatic relief axle acting on last axle, as maneuvering aid, up to 20 km/h, can be switched off manually Axle load detection via EBS-Canbus signal, for indication via display in driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Cngytwjsq Wheels and tires 435/50 R19.5 tires of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side Side amber LED lighting coupled with the blinker Flashing side lights Side lights 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Floor Screen printing plates approx. 30 mm thick, on longitudinal beams for high point load capacity for forklift axle load up to max. 7100 kg Front wall / front corner stanchions 2,580 mm high, steel corner stanchions in volume design, release device for side tarpaulin on bulkhead, crash blocker, bottom inside at approx. 140 mm height with steel impact protection Center stanchions 3 pairs of sliding stanchions can be moved along the entire length, with 4-fold pockets and with long pocket at the bottom. 3 pairs of stanchion positions Insertion slats 5 rows of wooden slats Rear wall / rear corner stanchions Rear corner stanchions steel up to lower edge of roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-leaf with 2 internal espagnolette locks each Tarpaulin Tarpaulin, with welded-in horizontal and vertical straps Stainless steel tension locks Roof Sliding roof, rear end lift can be folded up, with roof can be pushed from rear to front, L-shaped roof rail for automotive industry, internal width between the roof rails approx. 2,490 mm, tarpaulin color: white Roof non-elastic, hardly any deflection of the roof rail when loading and unloading EcoLift - lifting roof can be raised by approx. 380 mm, on both sides, with gas pressure damper support, 3 driving positions at the front: Front interior height approx. 2900 mm / 2950 mm / 3000 mm, adjusted to approx. 3000 mm Optimum rain strip at the rear, at the top of the end bows,

Overall weight: 31,000 kg, empty load weight: 5,980 kg, maximum load weight: 25,020 kg, axe configuration: 2 axles, first registration: 09/2019, tire size: 435/50 r19,5 164 j, Condition: used, machine/vehicle number: 41a47569b210fb6ff75f23f78, Further information Welded fine-grained steel construction, fifth wheel plate with replaceable 2 king pins, PRO SLIDE, additional front skid plate for protection when coupling, outer frame slightly inclined with Load-Lock profile for attaching lashing straps, note! to attach the straps in conjunction with drop sides, the drop sides must be opened! 24 t. 2-speed support winch, single-sided operation, with semicircular lower section and straight connecting plate, with thrust compensation, 1 pair of gear support legs at the rear, with straight lower section and single-sided operation in FR right Pull-out ladder at the rear, door brakes on the side, wheel chocks with holder, aluminium side collision protection, galvanized steel underride guard, quarter-shell mudguards in front of and behind each axle, with anti-spray flaps behind each axle, impact protection at the rear, heavy-duty pallet stop on both sides, approx. 15-20 mm high, with lashing option every 200 mm, loading height reduced by approx. 15-20 mm, plastic toolbox, document box, 36x26x4 cm Ctvvyo9Irw BPW disc brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption, axle spacing 1810 mm (then 10to axle load technical) Air suspension, without lift axle 2-line compressed air brake systemColored cable routing for easy servicing, spring-loaded parking brake, 2 interchangeable coupling heads at the front, without connecting cable, EBS, electronic brake system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve, vehicle driving stability system, axle load detection via EBS-Canbus signal, for indication via display in driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scales) 24 volt, multi-chamber lights, amber LED lighting at the side, 2 white position lights at the front, 2 white/red lane departure warning lights at the rear, 1 x 15-pin socket at the front, without connecting cable Floor: Screen-printed panels approx. 30 mm thick, cross joints with Omega inlay, on 8 longitudinal beams for high point load capacity for forklift axle load up to max. 7,300 kg and additional reinforcement in the rear area, steel/checker plate flooring in the rear area over a length of approx. 300 mm, flush screen-printed floor. Front bulkhead / stanchions front: 2,580 mm high, steel corner stanchions in volume design, release device for side tarpaulin on bulkhead, crash blocker, bottom inside at approx. 140 mm height with steel impact protection, bulkhead inside additionally covered with 2 x 1250 mm high screen printing plate Center stanchions: 3 pairs of sliding stanchions can be moved along the entire length, with 4 insertion pockets and a long pocket at the bottom, 3 pairs of stanchion positions Rear wall / rear corner stanchions Rear corner stanchions steel up to lower edge of roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors, 2-leaf with 2 internal espagnolette locks each, Fliegl I-Lock integrated door lock awarded with iF Design Award Tarpaulin with welded-in horizontal and vertical straps, Quick Lock system for side tarpaulin with central lock on both sides, Spring Curtain tarpaulin, with high-strength embedded spring steel strips, on both sides Roof: Sliding roof, rear end lift can be folded up, with roof can be pushed from rear to front, L-roof rail for au

Overall weight: 35,000 kg, empty load weight: 6,500 kg, maximum load weight: 28,500 kg, axe configuration: 3 axles, first registration: 02/2020, tire size: 445/45 r19,5, Condition: used, machine/vehicle number: 41b5b53ab0b527fda1f0f26fe, Further information The pictures are archive pictures, the vehicle may still be in use! Chassis saddle forwarding Fine-grained steel welded construction, with preload slight pre-tensioning in the neck area, saddle plate with replaceable 2 kingpins PRO SLIDE, additional front skid plate for protection when saddling up Slightly angled outer frame with Load-Lock profile for attaching tensioning straps Note! To attach the straps in conjunction with drop sides, the drop sides must be opened! 24 to. 2-speed support winch, single-sided operation, with semicircular lower section and straight connecting plate, with thrust compensation Note: Free support leg corner dimension or free swing radius to the rear approx. 1930 mm 1 pair of gear support legs at the rear, with straight lower section and single-sided operation in FR right Pull-out ladder at the rear Side door retainer Wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Quarter-shell mudguards in front of 1st axle and behind each axle With anti-spray flaps behind each axle Heavy blocker rear transverse bumper + side roller bumpers Heavy-duty pallet stop bolted on both sides, approx. 15 - 20 mm high, with lashing option every 200 mm, loading height reduced by approx. 15 - 20 mm Plastic tool box, with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) Storage compartment for 16 insertable slats, one-sided in FR-left, below loading area Axles+suspension BPW disk brake axles with 370 mm disk diameter, Axle/chassis laser-measured Reduction in tire wear and fuel consumption Air suspension Rear loading height approx. 1200 mm when raised (air suspension on truck lowered to approx. 910 mm semi-mounted height) without lift axle Brake system 2-line compressed air brake system Colored line routing for easy service. Spring-applied parking brake Duomatic connection at the front, without connecting cable EBS make Wabco-E, electronic brake system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lift & lower valve + auto-reset function Vehicle stability system Wabco ramp starting aid, TailGUARD with 3 ultrasonic sensors at the rear of the vehicle Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin and 1 x 15-pin interchangeable front sockets, without connecting cable Reversing camera system with color flat screen monitor, with wireless connection to the screen, screen with suction cup mount and power supply via 24 volt vehicle socket Floor Screen printing plates approx. 30 mm thick, on longitudinal beams for high point load capacity for forklift axle load up to max. 7100 kg Rear area with heavy-duty floor approx. 1800 mm long In the rear area, steel/ checker plate flooring is fitted over a length of approx. 300 mm (protrudes slightly). Front wall / front corner stanchions 2,580 mm high, steel corner stanchions in volume design, release device for side tarpaulin on bulkhead, Crash blocker, bottom inside at approx. 140 mm height with steel impact protection Center stanchions Cv9Fkwmt 3 pairs of sliding stanchions can be moved along the entire length, with 4 insertion pockets and a long pocket at the bottom. 3 pairs of stanchion positions Insertion slats Wooden slats Additional row of aluminum V-slats Vario steel slats, in conj