Used Boehringer Dus 560 for sale (62)

Condition: used, Year of construction: 1975, Technical details: Ppjdpov A Sqhefx Afhol turning diameter over bed: 500 mm turning diameter over support: 260 mm turning length: 950 mm center height measured in bed: 220 mm centre distance: 1000 mm revolution per minute: 11,2 - 2240 / 24 step U/min spindle bore of work spindle: 62 mm tailstock quill adjustment:: 210 mm longitudinal feeds:: 0,045 - 1,6 mm/U - 32 step cross feed: 0,02 - 0,71 mm/U - 32 step total power requirement: 11 kW weight of the machine ca.: k.A. t dimension machine xH: 3,3 x 1,2 x 1,6 m The machine is in a very good condition (very quiet spindle run) in Leipzig. Top slide rotatable 360° 3-jaw lathe chuck Ø 315mm with jaws (inside/outside) for speed 2000 rpm. Thread cutting: metric, modular thread, inch Chip protection wall Chuck protection (mechanical) MULTIFIX steel holder with Ø 40mm drill steel holder Chip collection tray Coolant supply with pump Protective device for lead screw Machine base UVV is pre-equipped ( UVV=Accident Prevention Regulations) *

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, Boehringer-Sturm- Variator-gear-box model D 57 ZK Input speed: 1.500/min. Output speed: 0 - 1.320/min. Ppjdpfx Asw D T Sbsfhjl

Condition: used, Year of construction: 1996, turning diameter 250 mm weight of the machine ca. 8 t PHILIPS CNC control X-axis: 295 mm / Y-axis: 295 mm Center distance: 1000 mm Max. diameter on the bed: Ø 310 mm Max. diameter when turning: Ø 250 mm. Maximum turning speed: 4500 rpm. Spindle bore diameter: Ø 78 mm Turret with 8 tools Pedpfxjyan R Aj Afhspl Weight: approx. 8 tons

Condition: used, Year of construction: 1999, Lathe with 4 tools only for 3-cylinder crank shaft Ppjdpfx Asw Dufiofhel *

Condition: used, tank capacity: 1,100 l, GENERAL Equipment: Spray head Design: vertical Remarks: Original drawing available; vessel was modified at the end of 1996 (test report available, no modification drawing); 1 welded bracket inside the vessel Speed: 705 rpm Outer diameter: 1,400 mm Inner diameter: 1,200 mm Total height: 2,450 mm Heating/Cooling: available Insulation: available Power: 1.5 kW Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 2.5 bar Max. overpressure: 2.5 bar Top head: removable/hinged top Mechanical seal: mechanical seal with thermal siphon vessel Agitator: propeller Base type: feet Location: Bremen Technical documents: drawing, TÜV certificates Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 1,100 litres Double jacket volume: 192.0 litres Wall thickness cylinder: 8 mm Pedpfxsxqaqbe Afhepl Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 840 mm Last application: Pharmaceuticals VESSEL Max. permissible operating temperature: 150 °C Number of feet: 3 pcs HEATING/COOLING JACKET Bottom head temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manway / dome: on top head (DN 400) Outlet: DN80 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V4A 1.4571 (AISI 316) Feet material: stainless steel AGITATOR 1 Agitator manufacturer: PRG Voltage: 230/400 Volt TECHNICAL DATA / DIMENSIONS Head wall thickness: 8 mm Agitator arrangement: eccentric in the top head

Condition: good (used), Year of construction: 1972, functionality: fully functional, machine/vehicle number: 70.1025.002302, turning diameter over cross slide: 280 mm, spindle bore: 52 mm, turning diameter: 485 mm, center height: 232 mm, center width: 360 mm, turning length: 1,600 mm, total length: 3,350 mm, total width: 1,100 mm, total height: 1,400 mm, spindle speed (max.): 2,240 rpm, spindle speed (min.): 11 rpm, overall weight: 2,500 kg, workpiece weight (max.): 500 kg, Offered for sale is a VDF 48S Boehringer lead and feed screw lathe with accessories in good condition. Manufacturer: VDF Boehringer Göppingen Model: 48S Machine no.: 70.1025.002302 Psdpsx Nqklefx Afhopl Year of manufacture: approx. 1972 Centre height: 232 mm Centre distance: 1600 mm Swing over bed: 485 mm Swing over cross slide: 280 mm Spindle bore: 52 mm Spindle speeds: 11.2 - 2240 rpm Total power requirement: 7.5 kW Machine dimensions (L x W x H): approx. 3.35 x 1.10 x 1.40 m Weight: approx. 2,500 kg

Condition: used, Year of construction: 1974, turning diameter over bed 550 mm turning diameter over slide rest 300 mm turning length 1650 mm centre height 275 mm spindle bore 82 mm spindle turning speed range 9 - 1800 U/min total power requirement 23 kW Psdpfex I Sf Iex Afhjpl weight of the machine ca. 4,5 t dimensions of the machine ca. 4,5 x 1,4 x 1,9 mm Lathes with: - Digital readout - Rapid traverse - Multifix tool post - Includes multiple tool posts - Forkardt 3-jaw chuck F400 - Coolant system - Machine light - Centering point - Chuck guard - Chip tray - Emergency stop device - Amperage display for main spindle

Condition: ready for operation (used), turning diameter over cross slide: 800 mm, turning diameter: 800 mm, turning diameter over bed slide: 560 mm, Center Lathe VDF V6 Distance between centers: 5000 mm Turning diameter: Over guides: 800 mm Over carriage: 560 mm Spindle speed: 560 rpm Motor power: 11 kW Ppjdpfx Aoxpillofhol Accessories: Steady rests: 330 mm and 420 mm

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, turning length: 1,000 mm, spindle speed (max.): 3,000 rpm, turning diameter over bed slide: 480 mm, controller model: Siemens Sinumerik 840C, TECHNICAL DETAILS Turning length: 1,000 mm Swing diameter over bed: 550 mm Swing diameter over cross slide: 480 mm Turret: 12 positions Number of driven stations: 6 Tool holder: VDI50 Speed range: 30 - 3,000 rpm Spindle bore: 90 mm MACHINE DETAILS Control: Siemens Sinumerik 840C Dimensions & weight Dimensions (LxWxH): 580 x 270 x 270 cm Weight: approx. 11 t Pedjxtmvcepfx Afhjpl EQUIPMENT SMW Autoblok 315 power chuck (without soft top jaws) Approx. 10 driven tools Approx. 10 live centers for tailstock

Condition: good (used), Year of construction: 1970, Ref. -No.: 10575 Manufacturer: VDF BOEHRINGER Type: T 11 Year of construction: 1970 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Germany Machine-No.: 40XXX Turning Diameter: Ø 700 mm Turning Length: 3000 mm Spindle Diameter: Ø 750 mm Spindle Bore: 70 mm Ppodpoxmd Uvsfx Afhol Swing diameter over cross slide: Ø 450 mm

Condition: used, Year of construction: 1976, functionality: unexamined, total length: 4,100 mm, total width: 1,900 mm, total height: 1,900 mm, bed width: 550 mm, rotational speed (max.): 1,800 rpm, For sale is a Boehringer DM550 centre lathe with leadscrew/feed shaft from 1976 (18.5 kW). The DM 550 features a swing diameter of approx. 550 mm (over bed) and offers high rigidity for heavy-duty and precise turning operations. The machine is in age-appropriate condition, has not been tested, and is being sold as-is. Our Service Promise: Psdpfx Afsxyxu Dshspl We prioritize quality, expertise, and customer satisfaction. Our team consists of qualified and experienced technicians specialized in Mazak machines as well as other machinery. We place great emphasis on personal support and are happy to assist you anytime, even after purchase. With us, you are in the best hands – professional, reliable, and passionate about machines! PS CNC Service Germany GmbH & Co. KG All information subject to change without notice.

Condition: used, Boehringer VDF 25m-4, CNC lathe, used machine Manufacturer: Boehringer Model: VDF 25m-4 Year: 2001 Weight: 18,700 kg with chip conveyor with oil mist extractor Psdpow Nbgisfx Afhjpl Chuck size: 400 mm Power: 40.3 kW Max. spindle speed: 4,000 rpm Turning diameter: 450 mm Swing over bed: 700 mm Distance between centers: 750 mm Control: CNC (Siemens)

Condition: used, Year of construction: 2002, turning diameter max. 480 mm turning length max. 2.000 mm control Sinumerik 840 D Siemens swing diameter max. over bed cover 520 mm turning speed range - main spindle 7 - 2.800 min/-1 transmission ratio 2 power capacity - main spindel 53 kW max. Torque 3.456 Nm spindle nose 11 DIN 55026 chuck diameter 315 mm spindle bore 103 mm usable bar diameter 82 mm x-travel 405 mm z-travel 2.049 mm diameter of quill 100 mm quill stroke 100 mm tension force 14 kN capture 30 DIN 2079 rapid traverse 10 m/min Working speed 0,1 - 10.000 mm/min feed power 15 kN number of toolpositions 12 pos. driven statition 6 pos. Shank diameter 50 mm power capacity 5,4 kW Max. Speed 2.500 / 625 min/-1 max. Torque 25 / 100 Nm total power requirement ca. 50 kW weight of the machine ca. 14 t dimensions of the machine ca. 6,4 x 3,8 x 3,0 m CNC-Lathe Ppjdpfxjvy Ig To Afhjl VDF BOEHRINGER - VDF 315 Cm / DL 2000 - incl. 2x Workbench

Condition: good (used), Year of construction: 1994, Boehringer VDF 180 CM / DL 1000, year of manufacture 1994, Siemens Sinumerik 840 CE control, X/Z travel 295/1148 mm, 12-station turret – 6 driven stations, VDI 40, C-axis, spindle speed up to 4,500 rpm, tailstock, quill diameter 90 mm, quill stroke 80 mm, steady rest, three-jaw chuck Ø 200 mm, Ppjdpfx Aoxupvuefhol

Condition: used, Year of construction: 1971, machine/vehicle number: 1047 0885, height of centers: 330 mm center distance: 1500 mm max. circulation-Ø over bed: ueber Bett 690 mm spindle boring: 82 mm spindle retainer: Kurzkegel Gr. 8 Ppedpfxebbk Exj Afhjl retainer taper tailstock: 6 MK spindle speed: 7,1 - 1400 rpm forwarding feed: laengs/plan 0,05-112/0,025-56 mm/U thread pitch: 0,25 - 560 mm electrical connection: 380 V, 15 kW space needed: 3350 x 1800 x 1400 mm weight: 4800 kg

Year of construction: 1982, condition: ready for operation (used), A conventional screw-cutting lathe Boehringer is available. Swing over bed/cross slide: 690mm/415mm, distance between centers: 1500mm, cylindricity deviation (tapered) over 100mm: 0.15mm, roundness deviation: 0.02mm, total runout: 0.02mm, perpendicularity deviation over 200mm: 0.05mm, chuck diameter: 630mm-700mm. An on-site inspection is possible Ppedpfexq Ex Rsx Afhjl

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1325.0458-14, controller manufacturer: Siemens, input frequency: 50 Hz, input current: 190 A, TECHNICAL DETAILS Electrical Operating voltage: 400 V Phases: 3 AC Frequency: 50 Hz Fusing: 250 A Podjwx Hktepfx Afhspl Rated current: 190 A EQUIPMENT Lathe with 4 tools, suitable only for 3-cylinder crankshaft

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: MK 15982, center width: 700 mm, overall weight: 18,000 kg, TECHNICAL DETAILS General Data Distance between centers: 700 mm Maximum swing diameter: 200 mm Specification Lathe with tools: 4 Suitable for: 3-cylinder crankshaft MACHINE DETAILS Machine weight: approx. 18 t EQUIPMENT Ppedpswx E Tmefx Afhol Lathe with 4 tools only for 3-cylinder crankshaft

Condition: used, Year of construction: 1994, Technical details: turning diameter: 570 mm turning length: 1000 mm dimensions of the machine ca.: 3,25 x 2,03 x 1,95 m Tool disc turret for 8 tools with VDI 30. Not for power tools machine manual, technical documentation; Accessories: 3-jaw chuck, various tool holders Ppedpfx Ajwwluzjfhsl Video is available *

Condition: used, Year of construction: 1987, Lead and draw spindle lathe Make: Boehringer Model: DUE 560 Year of manufacture: 1987 Podpfetud S Uox Afhspl used Technical data: turning diameter 250 mm turning length approx. 1200 mm Rotation Ø over bed 560 mm Rotation Ø over facing slide 365 mm Max. workpiece between the centers 500-800 kg Spindle diameter in front bearing 100 mm Spindle bore 62 mm Spindle head DIN 55022 No. 8 Travel Face slide travel 345 mm Top slide travel 125 mm Tailstock/pinsØ 80 mm Tailstock holder MK 5 Quill stroke 190 mm Longitudinal feed 60 x 0.0315-28 mm/1 Face feeds 60 x 0.016-14 mm/1 Tapping capacity 0.125-112 mm Total power requirement 20 kW Space requirement approx. 3.5x2.0x2.2 m Weight: approx. 2.5 tons

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, turning length: 1,000 mm, turning diameter: 570 mm, quill stroke: 190 mm, bed width: 360 mm, rotational speed (max.): 2,500 rpm, TECHNICAL DETAILS Swing over bed: 570 mm Swing over cross slide: 365 mm Cross slide travel: 345 mm Center height over flat track: 280 mm Bed width: 360 mm Bed slide guide length: 520 mm Cross slide width: 225 mm Cross slide length: 680 mm Turning tool cross-section according to DIN 770 hxb: max. 20 x 20 mm Thread pitch: 01-400 mm Main spindle Spindle head according to DIN 55 027: Gr. 8 Spindle diameter in front bearing: 100 mm Spindle bore: 62 mm Main spindle inner taper: 70 mm Speed range gear stage I: 3–500 rpm Speed range gear stage II: 15–2500 rpm Constant cutting speed: 1–9999 m/min Speed control: 50–120% Load display in % on screen: 0–140% Main drive Three-phase AC motor: 0–120 kW Drive power (60%/100% duty cycle): 19/15 kW Maximum torque (60%/100% duty cycle): 1,800/1,400 Nm Total speed range: 3–2,500 rpm Number of gear stages: 2 Feed drives Feed range, flat and Longitudinal: 0.01-50 mm/rev Max. feed rate, transverse (rapid traverse): 5 m/min Max. feed rate, longitudinal (rapid traverse): 10 m/min Conventional rapid traverse, longitudinal: 5 m/min Tool holder Number of tool holders: 8 Diameter of the 8 cylindrical shank holders according to DIN 69 880: 30 mm Ppsdpfx Afowmck Sjhol Tailstock Quill diameter: 80 mm Quill stroke: 190 mm Inner taper of the quill: MK 5 Tip angle, normal: 60° MACHINE DETAILS Dimensions (L x W x H): 3.25 x 2.03 x 1.95 m EQUIPMENT - Disk tool turret for 8 tools with VDI 30. - Not for driven tools - Machine manual, technical documentation; - 3-jaw chuck, various tool holders

Year of construction: 1995, condition: ready for operation (used), A Boehringer cycle-controlled CNC lathe is available. Turning diameter over bed/face slide: 820mm/520mm, turning length: 1000mm, spindle bore: 128mm, quill diameter: 125mm, quill stroke: 280mm, max. workpiece weight: 5000kg. Machine dimensions X/Y/Z: approx. 3700mm/2400mm/2500mm, weight: approx. 6500kg, operating hours: 39814h. On-site inspection is possible. Ppsdpfx Afewu E Ddehel

Year of construction: 2007, condition: ready for operation (used), Traverse paths facing slide/top slide/tailstock quill: 345mm/125mm/190mm, longitudinal/face feed per revolution: 56mm/28mm, speed: 2240rpm, max. workpiece weight: without setting block: 500kg, 1 setting block: 630kg, 2 setting blocks: 800kg. Circumferential diameter over bed/plane slide/bed spreading: 570mm/365mm/600mm. The automatic plan feed is defective. Documentation available. Ppsdor Nd Ekopfx Afhol

Condition: used, turret of a Boehringer lathe Ppjdpfjn Sulmox Afhjl