Used Tur 560 for sale (14)

Condition: ready for operation (used), Rotation diameter over bed/slide: 560mm/300mm, max. workpiece weight between centers: 2500kg, max. workpiece weight in chuck: 800kg, center width: 1000mm, machining length: 980mm, feed: 8m/min, bed width: 433mm, tool positions: 8, tool holder: VDI40. Machine dimensions X/Y/Z: approx. 3000mm/2300mm/1800mm, weight: approx. 3700kg, control: Siemens 810D Manual Turn. Documentation available. On-site inspection is possible. Nwjdpfx Aewynvteqvjg

Year of construction: 2021, condition: excellent (used), machine/vehicle number: 29092021, T-503 PAPER SLITTER REWINDER MACHINE GENERAL INFORMATIONS: Machine weight : ≈ 2000 kg Number of Knives : 12 Units Bobbin Loading Stand : Yes Air Shafts : Yes Tension Control System : Yes Brake System : Yes Speed Control System : Yes Trucker motor power : 5,5 KW Top rewind motor power: 7,5 KW Bottom rewind motor power : 7,5 KW Unwind: 1250mm Rewinder: 920 mm Width: 1200 mm Nedpjy Twciefx Aqvswg

Condition: used, Year of construction: 1979, 31.5 MV power transformer, 110 kV / 10.5 kV with tap changer (19 steps), with expander, Buchholz relay, dehumidifier, switching group Yy0, transformer book available Nederk Nrtepfx Aqvjwg

Condition: used, Year of construction: 1978, 10 MVA oil transformer, TuR Dresden, 30 / 10.5 kV with tap changer 19 steps, switching group YNyn0, with expander, Buchholz relay, dehumidifier, fan, dial thermometer, year of manufacture 1978 Nodet Akl Hopfx Aqvjwg

Condition: excellent (used), functionality: fully functional, Lathe in very good condition, fully operational and functioning. The TUR 50S x 1500 mm universal lathe is a classic machine tool version produced by the Wroclaw Mechanical Devices Factory (FAT Wrocław). Geometric and weight parameters: • Maximum turning length between centres: 1500 mm • Maximum workpiece length: approx. 1600 mm Nwsdsy Su Dzspfx Aqvsg Key cutting and drive specifications: • Swing over bed: 500 mm • Swing over cross slide: 300 mm • Spindle bore diameter: 90 mm • Bed width: 432 mm • Main drive motor power: 7.5 kW / 11 kW (two-speed) • Number of spindle speeds: 21 mechanical steps • Spindle speed range: 18 – 1800 rpm • Tailstock quill taper: Morse taper 5 (MT5) • Tailstock quill travel: 180 mm • Rapid traverse rates: longitudinal 5.6 m/min / cross 2.8 m/min

Condition: new, functionality: fully functional, Spare parts for machines manufactured in Poland. AFM Andrychow, FUM Poreba, FAT Wrocław, AVIA Warszawa, Jafo Jarocin, ZM Tarnow, FAMOT Pleszew. Spare parts for Polish lathes, including: TUM 25, TUM 35, TUJ 50, TUJ 63, TUJ 560, TUJ 630, TUR 50, TUR 63, TUR 560, TUR 630, TPK 90, TRP 93, TRP 110, TR 115, TR 135. Spare parts for Polish milling machines, including: FND 25, FND 32, FND 40, C20, D36, D40, FF series, FR series. Nsdpoum Ixxofx Aqvswg

Condition: reconditioned (used), Year of construction: 2026, functionality: fully functional, spindle bore: 140 mm, turning diameter: 630 mm, turning diameter over bed slide: 380 mm, center width: 3,000 mm, turning length: 3,000 mm, Universal lathe machine after general overhaul. Njdpfxjd Eafdo Aqvewg

Condition: new, New tool holders for the FAT Wrocław TUR-50, TUR-560, TUR-63, TUR-630, TUR-710, and TUD 40/50 lathes. Nsdpfx Aswak Dtjqvowg Spare parts for 4-way tool holders and many other mechanical parts and electromagnetic clutches for metalworking machines are also available for sale. The largest selection in Europe. We ship our parts worldwide.

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 90 mm, turning diameter: 630 mm, turning diameter over bed slide: 630 mm, turning diameter over top slide: 380 mm, turning length: 3,000 mm, quill diameter: 90 mm, total length: 4,900 mm, total width: 1,420 mm, total height: 1,590 mm, rotational speed (max.): 1,800 rpm, rotational speed (min.): 18 rpm, overall weight: 3,700 kg, workpiece weight (max.): 1,500 kg, spindle mount: MK 6, The universal lathe FAT TUR 630M/3M has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Nedpfx Aed Eaa Eoqvowg Availability: in stock, under power, ready for technical acceptance. Technical specifications: - distance between centers/turning length: 3000 mm - turning diameter over bed: 630 mm - turning diameter over support: 380 mm - spindle bore diameter: 90 mm - maximum workpiece weight between centers: 1500 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 18 - 1800 - range of feeds (mm/rev): longitudinal: 0.05 – 3,26 transverse: 0.25 – 1,63 - engine power: 15 kW - overall dimensions: total length: 4900 mm width: 1420 mm height: 1500 mm total weight: 3650 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 10-140 mm, with rollers - Steady rest, 10-180 mm, with rollers - Steady rest, 140-300 mm, with rollers - MULTIFIX quick change tool post

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 140 mm, turning diameter: 630 mm, turning diameter over bed slide: 380 mm, center width: 3,000 mm, turning length: 3,000 mm, The lathe has been fully overhauled and meets the technical parameters specified in the technical documentation (DTR), technical acceptance conditions (WOT), and Polish Standards. The lathe is covered by a full 12-month warranty. Availability: In stock, ready for operation, connected to power. Nwodpfx Aqeyi U Uasvog The universal lathe TUR 630A x 3000 is designed for single-piece and small-batch production of shaft-type and disc-type parts. The machine can be used for turning, facing, boring, and cutting metric, inch, module, and DP threads, both right-hand and left-hand. It is suitable for use in serial production departments as well as in maintenance and repair workshops. Its compact design, wide range of spindle speeds, and feed rates enable both roughing and finishing machining of cast iron, steel, non-ferrous metals, and plastics. Technical Data – TUR 630A x 3000: Swing over bed [mm]: 630 Swing over cross slide [mm]: 380 Spindle bore diameter [mm]: 140 Distance between centers [mm]: 3000 Number of spindle speeds: 21 Spindle speed range [rpm]: 18–1800 Number of feeds: 42 Feed range [mm/rev]: Longitudinal: 0.08–3.26 Cross: 0.04–1.63 Motor power [kW]: 15 Overall dimensions [mm]: Length: 3700 Width: 1420 Height: 1650 Machine weight [kg]: 3400

Condition: ready for operation (used), Year of construction: 2010, FAT TUR 630AMN x 2000 CNC Siemens 840D Yom: 2010 Nedpfew Ecuuox Aqvowg Turning diameter: 630 mm Turning diameter over top slide: 370 mm Turning length: 2,000 mm

Condition: new, Year of construction: 2025, machine/vehicle number: 0000, We offer complete revised FAT Lathes, in factories geometry, bed ground by FAT, new electrics, TUR 630 M x 2000 or TUR 630 M x 3000 TUR 630A x 3000 or TUR 630 A x 4000 spindlebore 140mm , 2 chucks 400 mm Bison Machine deliverytimes 3 - 4 Months after written order Nodpfx Aenqzaieqvowg Accescories as per Customer specifications

Condition: used, Year of construction: 1996, functionality: fully functional, turning diameter: 710 mm, turning length: 3,000 mm, Universal lathe FAT Poland Model: TUR 710 x 3000 Year of manufacture: 1996 Accessories: Digital readout 3-jaw chuck Tool holder Steadies Live centre Nwjdpfxjxxm A Ho Aqvjg

Condition: reconditioned (used), Year of construction: 2026, operating hours: 100 h, machine/vehicle number: BMWF241003, Professional Rebuild and Retrofit of Heavy CNC Lathes: Niles, Weiler, Gildemeister, TOS, TURMN The offer is for a TUR MN 560 CNC lathe. Max turning diameter: 560mm, max turning length: 960mm. Equipped with a 4-position Sauter turret. All wear parts have been replaced; the machine has been repainted and retrofitted with a new Siemens 828D. We specialize in restoring full operational capability and performing digital modernization of heavy machine tools that form the foundation of rigid and efficient production. We combine the legendary durability of heavy cast iron with state-of-the-art Industry 4.0 control systems. Why choose our retrofitted machine? Nwodsv R Dlyspfx Aqvog Performance of a New Unit at 50% of the Price: We offer machines with the performance and accuracy of new machining centers at a fraction of the cost of a new investment. Unrivaled Rigidity: We rely on proven machine bases from brands such as Niles DFS 4 (slant bed, 17 t weight) or TOS SUA (load capacity up to 8 tons), which outperform modern, lighter designs in terms of vibration damping. Modern CNC Heart: We install the latest systems (Siemens Sinumerik ONE / 840D sl / 828D), ensuring full availability of spare parts, remote diagnostics, and ease of programming. ​ ​ Warranty and Support: Every machine after complete mechanical overhaul (DIN 8605 accuracy class) and electronic retrofit is covered by a 12‑month warranty. Our specializations: Niles DFS 3/4: Comprehensive rebuilds of multi-axis centers (C, Y, B) for the most demanding applications. Weiler E Series: Restoring legendary precision and intuitive cycle operation for premium toolrooms. Gildemeister NEF 710: “Smart Retrofit” of the control system, giving a second life to these reliable German designs. TOS SUA 80/100: Complete overhauls for the heaviest shaft and large-part machining. TURMN 630/800/1100: General overhauls and “Smart Retrofit” CNC control upgrades. Our offer goes beyond selling ready-made machines. We provide full flexibility and consulting throughout the investment process: Purchase on Request: At the customer’s request, we search for the optimal machine base on European markets (e.g. Germany, Italy, Poland). We use our experience in evaluating “dead CNC” machines to buy units at a price close to mechanical scrap value, while preserving their full potential for rebuild. Evaluation and Pricing of Market Machines: If the customer finds a machine independently, we offer a professional mechanical inspection (bed geometry, spindle play) and preparation of a detailed cost estimate for overhaul and retrofit. Overhauls of Customer-Owned Machines: We carry out complete modernization of machines already installed in the customer’s machine park.