3
The BOMAG BPR 25/50 D vibratory plate: "The lightweight all-rounder for earthworks, asphalt and paving". Universally applicable for all earthwork, asphalt and paving applications, the forward- and reverse-rotating vibratory plates always offer the right solution and, above all, that little bit more in terms of reliability and compaction performance. BOMAG BPR 25/50 D - Reversible - Operating weight: 155 Kg - Working width: 500 mm - New and unused - Engine protection cover - Single lever control ...
8
The BOMAG BP 25/50 D vibratory plate: "The lightweight all-rounder for earthworks, asphalt and paving". Universally applicable for all earthwork, asphalt and paving applications, the forward-moving vibratory plates always offer the right solution and, above all, that little bit more in terms of reliability and compaction performance. Type: BP 25/50 D Year: 2020 Hours: 0 Description: - Working width: 500 mm - Working speed: 30 m/min - Weight: 123 kg - Max. Gradeability: 30 % - Engine : Hatz 1B20,...
5
25 running meters tire rack
Bhdpni0zq0
Used, very good condition, see pictures
height 2,5 m
depth 50 cm,
field load 9000 kg
beam length 2,1 m
Beam with superimposed load / compartment 1000 kg
Negotiable price: € 1.950,-- net ex stock
Offer consists of:
+ 12 pcs. frames pre-assembled, 9t field load, depth 50 cm, height 2,5 m
+ 66 pcs. beams, length 2,1 m, 1000 kg payload/slot
+ 132 pcs. suspension locks
+ 24 pcs. concrete anchors
Load plates
Other composition on request!
Goods are in stock.
Trans...
6
Dear Ladies and Gentlemen!
Dear Ladies and Gentleman!
(Please see the english translation below)
----
We are pleased to offer you a BOMAG BPR 60/65 D vibratory plate.
- NEW -
Year of manufacture 2022
The machine has:
- Weight: 460kg
- Engine power: 6,7kW
- Exhaust gas stage: Stage V
- Fuel: Diesel
- electric starter
- ready for immediate use
For further questions, please contact Matthias Pichl at Tel .
The contents of our offers have been prepared with the utmost care.
Wie2lh2...
4
Discover more used machines
5
The "BA 35" is a 3-roll universal section bending machine with computerised numeric control ( CNC ) and can be operated manually or automatically. It has been designed for bending average size sections.
The machine is controlled electronically by an industrial computer ( PC ), by a ( 32 bit ) modular board PLC system for control of the axes A1 - A2, and by a control panel for interface with the operator.
The CNC system allows any type of bend to be made, either through the use of a computer gr...
3
Vibratory plate Bomag BP 12/50 A, year of manufacture 2018, weight 82 Kg, ser.no.101230241488, petrol, bracket is not original
B2izjnu3
1
Please see the english translation below
----
We are pleased to offer you a vibratory plate Bomag BPR 70/70 D.
The machine has:* Weight: 570 kg
* Power: 9,3 kW / diesel
* Length: 980 mm
* Width: 700 mm
* Year of manufacture: 2021
* Centrifugal force: 70 kN
* Immediately ready for use
Bkeqi2vi2a
For further questions, please contact Matthias Pichl at Tel.
The contents of our offers have been prepared with the utmost care.
However, we cannot guarantee the correctness, completeness and topicalit...
7
7
Dear Ladies and Gentlemen,
dear Ladies and Gentleman!
(please read the english translation below)
We offer you the complete Bomag Light Equipment!
In our offer we always have slightly used demonstration equipment and new equipment in stock,
as well as on order according to customer requirements!
Bkepwc2gnb
Ask us, we will be happy to advise you!
For further questions, please contact Matthias Pichl at Tel.
The contents of our offers were created with the utmost care.
However, we can not guaran...
6
Screw bookbinding press Karl Tranklein 50×25
The device is fully operational, ready to work.
Size approx. 500 × 250 mm
Pressure 3t
Cgvn3kuk9t
1
sheet thickness: 50bending length: 2600upper roll diameter: 510
Technical specifications:
- Hardened and polished rolls
- Complete body made of ST-52 Steel
- Machine have 4 rolls and designed for symmetrical working principle
- Hydraulic powered cover for easy material extracting
Cpsnt73a
- Digital readout for side rolls (2 digital readout)
- Side rolls are free for rotation and upwards downwards movements are hydraulic powered
- Top and bottom rolls are driven by hydraulic and gearbox. Bottom r...
5
Multi-spindle head, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear
-comes from an Alberti drilling rig
-max.: 18x drill
-Admission:
W77ht78dm
-alternately turning right/left
-Distance drill: 50 mm
-Distance drill: 25 mm
-Number: 2x drilling heads available (1x left/1x right)
-Price: per piece
-Dimensions: 1090/380/H580 mm
-Weight: 210 kg/piece
- press brake -second hand-
- JELSINGRAD - HAPA 50/25
B9fqlgnskc
- dimension: 2500 x 1000 x 2162mm
- weight: 3400kg
4
Injection molding machine
-Closing force: 25 to
-Screw diameter: 22 mm
-Control Unilog 2040
-Spar distance: 250x250 mm
-Data collection terminal
Qkwlqfhyl
-Parts removal device make ASS
-Temperature control device make Single
6
Stroke: 25 mm
Manufacturer: Festo
Piston Rod Type: Single-ended piston rod
Pressure (pmax): 10 bar
Piston Diameter: 50 mm
Guarantee in months: 12
Product condition: New from old stock
Item No.: 3496356
Dykw0i2
6
Rexroth SM 25/50-TA Servo module 1070077376-111 , SN:004409383 ,unused in opened original packaging, 100% functional, scope of delivery according to photos
Q2di9
7
CNC press brake make DARLEY type EHP 50-25/20
Machine # 12940 Year of construction 1988
technical data:
max. pressing force 50 t
number of cylinders 2
working length 2550 mm
passage between the uprights 2050 mm
lateral projection 250 mm
table width 100 mm
lowering speed 100 mm/sec.
Ba0nqn0e
working speed 13,5 mm/sec.
retraction speed 75 mm/sec.
drive power 5,5 kW
weight approx. 3,6 t
outer dimensions approx. 2750 x 1100 x 2050 mm
with
- hydraulic clamping of the upper tool
- CNC control DELEM DA...
3
offer without engagement, all dimensions approx. and errors excepted
ROOFING FOR TRUCKS / HOUSING MOBILES / HEAVY TRANSPORTATION
the special we have managed to put this roof on only 4 supports.
Dzwle3
Supports cantilever 25 x 40 m 1.000 m²
All 4 sides 5 m roof extension
Roof area 35 x 50 m 1.750 qm
Clear height clearance approx. 5.00 m
Eaves approx. 8.00 m
Ridge approx. 9.20 m
Roof covering Trapezoidal sheet metal with anti-drip or
40 mm sandwich panels
Snow load 85 Kg/m²
Wind load zone 1
...
2
Bosch
Kondensatormodul KM 1100 - T 6005 04 512023 00
Versorgungsmodul VM 60 R - T 6005 04 512026 00
Spindelmodul SPM 25 - T 6005 04 610120 00
Servomodul SM 10 / 20 - TC 6005 04 512034 00
Servomodul SM 10 / 20 - TC 6005 04 512034 00
Servomodul SM 10 / 20 - TC 6005 04 512034 00
Servomodul SM 25 / 50 - TC 6005 04 512035 00
22kn0cvz
4
Pneumatic cylinder
-Type: ADV-25-50-A
-Max.: 10 bar
-Price: per piece
-Number: 5x available
-Weight: 0.3 kg
Liczn
6
Guarantee in months: 12
Manufacturer: Festo
Product condition: New from old Stock
Piston Diameter: 25 mm
Stroke: 50 mm
Fgqravt7s
Item No.: 543909
4
Servo module
Manufacturer: Bosch
Available types:
Bosch SM 10/20-TA
520 V DC 10 A
Price: 580€
Bosch SM 25/50-TA
520 V DC 25 A
Price: 690€
Bosch SM 17/35-TA
520 V DC 17 A
Price: 590€
Bosch SM 17/35
520 V DC 17 A
Price: 590€
condition: fully functional and ready for use
D802npu2i
Functional guarantee on delivery
--ᐳ Please indicate in your inquiry which servo module you are interested in.
7
Product condition New from old Stock
Case Storage marks
Manufacturer Dürr
Guarantee in months 12
Volume (max) 63,5 m³/min
Rotation Speed 3480 - 3600 rpm
Power 3,8 kW
Temperature max. 80 °C
Weight 62.5 kg
Stock location Rosenfeld
Bsgsjpthak
Stock ground P8E2
5
Gear motor, electric motor, three-phase motor, electric gear motor
-Manufacturer gearbox Kollmann type: ZS4-B3
Dpq9pbg
-Manufacturer Motor Garbe Type: 90L8/4
-Speed: 25/50 rpm
-Power: 0.55/0.75 kW
-Construction: B3
-Diameter shaft: Ø 35 mm
-Protection class: IP 33
-Dimensions: 530/250/H270 mm
-Weight: 48 kg
6
Pressure (pmax): 10 bar
Piston Diameter: 50 mm
Manufacturer: Festo
Cevicfcdie
Stroke: 25 mm
Product condition: New from old stock
Guarantee in months: 12
Item No.: 170871
2
Internal quick probe, length measuring device, internal precision measuring device, internal measuring device, internal measuring probe, micrometer screw
-Interior measuring device
-Measuring range: 25 - 50 mm
Bd9vvejy
-Weight: 0.5 kg
6
Stroke: 25 mm
Pressure (pmax): 0 - 10 bar
B83gtdfwg9
Product condition: New from old Stock
Piston Diameter: 50 mm
Guarantee in months: 12
Manufacturer: Festo
Item No.: 170946
4
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders
-Festo type: ADVU-50-25-PA
-Piston: Ø 50 mm
-Piston rod: Ø 16 mm
Fwd88d3d
-Stroke: 25 mm
-Max. Pressure: 10 bar
-Price: per piece
-Number: 2 pieces
-Dimensions: 78/72/H72 mm
-Weight: 0.7 kg
6
Case: slight scratches, light dents
Qz8x7
Piston Diameter: 25 mm
Traces of use: Slight traces of usage
Product condition: Used from old Stock
Guarantee in months: 12
Stroke: 50 mm
Item No.: TBDAM25x50
4
Pneumatic cylinders, air cylinders, pneumatic rams, air rams
Fk3sys7
-Stroke: 25 mm
-Piston diameter: 50 mm
-Piston rod: 18 mm
-Dimensions: Ø 57/250 mm
-Weight: 1.3 kg
6
Guarantee in months: 12
Product condition: New from old Stock
Stroke: 25 mm
Packaging: originally packed
Piston Diameter: 50 mm
Pressure (pmax): 10 bar
Case: very good, no scratches
Icm3g0tb
Item No.: 156553
4
Pneumatic cylinders, air cylinders, pneumatic rams, air rams, standard cylinders, short-stroke cylinders, compact cylinders
-Stroke: 50 mm
-Piston diameter: 25 mm
-Piston rod: 10 mm
-Price: per piece
-Number: 2 pieces
-Dimension: Ø 30 x 192 mm
Bgrhj2khq3
-Weight: 0.3 kg/piece
6
Piston Diameter: 50 mm
Guarantee in months: 12
Cfl7ditbq8
Product condition: New from old Stock
Stroke: 25 mm
Pressure (pmax): 10 bar
Case: very good, no scratches
Item No.: 0 822 010 564
4
Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp
-Stroke: 50 mm
-Piston diameter: 25 mm
Ysbtd0
-Piston rod: 10 mm
-Max. Pressure: 8 bar
-Price: per piece
-Number: 2 pieces
-Dimension: Ø 27/194 mm
-Weight: 0.3 kg/piece
6
Product condition: New from old Stock
Piston Rod Type: Single-ended piston rod
B88jm0hzle
Stroke: 25 mm
Piston Diameter: 50 mm
Manufacturer: Festo
Case: Some storage marks
Pressure (pmax): 10 bar
Guarantee in months: 12
Item No.: 156639
4
Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp
-Stroke: 50 mm
-Piston diameter: 25 mm
-Piston rod: 10 mm
-Max. Pressure: 10 bar
-Dimension: Ø 27/192 mm
3xhljl3
-Weight: 0.3 kg
6
Case: slight scratches
Guarantee in months: 12
Pressure (pmax): 1 MPa
Product condition: New from old Stock
Item No.: CDQ2B50-25DC
Qeoi9
4
Micrometer, micrometer screw
Fidsdfqs0
-Measuring range: 25 - 50 mm
-Test piece: missing
-Accessories: see photo
-other sizes: available
-Dimensions box: 230/105/H35 mm
-Total weight: 0.7 kg
6
Case: Light storage marks
Stroke: 25 mm
Product condition: New from old Stock
Piston Diameter: 50 mm
B82ufanszd
Function: Tested
Pressure (pmax): 10 bar
Piston Rod Type: Single-ended piston rod
Guarantee in months: 12
Item No.: 0 822 495 004
5
Guide cylinder, guide pneumatic cylinder, pneumatic cylinder, compact cylinder
Bo3h3lkxlx
-Manufacturer: Festo, type DFM-25-50-PA-GF
-Piston: Ø 25 mm
-Stroke: 50 mm
-Gliding guide
-Dimensions: 135/95/H45 mm
-Weight: 1.6 kg
6
Rotation Speed: 3480 - 3600 rpm
Case: Storage marks
B83gkfcnob
Volume (max): 63,5 m³/min
Temperature: max. 80 °C
Guarantee in months: 12
Power: 3,8 kW
Manufacturer: Dürr
Product condition: New from old Stock
Item No.: MSN 50-25/305