Used Boring Head for sale (13,952)

Condition: used, Year of construction: 2003, Machine no.: 675157 Max. weight: approx. 3,500 kg (approx. 4,300 kg incl. packaging) Fjdpfx Aaezwf R Tetopl Supply/working voltage: 3x400 V, 50 Hz Control voltage: 24 V Nominal current: 20.5 A Main fuse: 25 A (T) CNC control: GE Fanuc Series 21i-T Grinding wheel speed indicator: make EWL, type 4444 Max. peripheral grinding wheel speed: 30 m/s (ø300 mm/12"), 40 m/s (ø400 mm/16"), 45 m/s (ø450 mm/18") Grinding head drive power: 5.0 kW Grinding wheel head R (left-mounted wheel): approx. ø450 x 80 mm Grinding wheel head RS (right-mounted wheel): approx. ø450 x 80 mm Grinding wheel head UR: left standard approx. ø400 x 63 mm, left max. (option) approx. ø400 x 80 mm, right additional max. (option) approx. ø300 x 40 mm; internal grinding attachment bore approx. ø80 mm Sub-table (Z-axis): distance between centers approx. 1000 mm, max. travel approx. 1150 mm, max. speed 12 m/min, resolution approx. 0.1 µm Top table swivel range (at 1000 mm centers): 0 to +6° (0 to +9° with workpiece length under approx. 800 mm) Grinding carriage (X-axis): max. travel approx. 320 mm, max. speed 6 m/min, resolution approx. 0.1 µm Pneumatics: min. connection pressure 6 bar, air consumption approx. 2.5 m³/h Drive motors: X-axis slide 2000 rpm/0.3 kW; grinding spindle (R/UR, ø400 mm wheel) 800-1900 rpm [40-95 Hz]/5.0 kW; sub-table (Z-axis) 2000 rpm/0.3 kW; workpiece headstock 2000 rpm/1.0 kW; automatic indexing (UR machine) 3000 rpm/0.5 kW; lubrication/hydraulic pump 1500 rpm [50 Hz]/0.12 kW or 1800 rpm [60 Hz]/0.15 kW Noise emission: equivalent continuous sound pressure level approx. 70 dB(A) Ambient conditions: max. room temperature +40°C, max. humidity 75% Data Coolant Filtration Unit Max. connection pressure: 3 bar / 1 bar (two circuits) Max. flow rate: 80 l/min / 160 l/min (corresponding to the two circuits)

Condition: excellent (used), functionality: fully functional, WMW Heckert ZFWVG 250X800 No. 262122/42 Fjdpszxqbyefx Aatjpl Long thread and spline milling machine, also for gear hobbing. (Thread milling and spline shaft hobbing machine) Max. workpiece diameter: 250 mm (the machine can swing up to 500 mm over the bed/support) Milling length (Z-axis): 800 mm Tailstock height above bed: 260 mm Spindle diameter (bore): 102 mm Max. module: Up to module 10 / 18 (depending on the specific head configuration) Spindle speed: 45 – 560 rpm Total power consumption: 9.5 kW Machine weight: Approx. 3,400 kg

Condition: good (used), Year of construction: 1995, functionality: fully functional, The perfect retrofit machine! Mechanically in phenomenal condition! This machine can be inspected under power until 12.05.2026 and will then be dismantled due to space constraints. Please refer to the attached KLINGELNBERG inspection reports available for download. Gleason P 800 Year of manufacture: 1995 Control: SIEMENS 840 C (discontinued) Condition: Mechanically in excellent condition Functionality: Fully operational Inspection: Available under power Technical Data: Nominal workpiece diameter: 800 mm Max. workpiece diameter: 800 mm Max. workpiece diameter, special version: 1,200 mm Nominal module: 20 / 30 mm Fedpfx Aaey Hfm Nstepl Nominal module, special version: 25 / 35 mm Drive power: 35 kW Drive power, special version: 52 kW Cutter head speed range: 20 - 200 rpm Cutter head speed range, special version: 26 - 265 rpm Additional cutter head speed range, special version: 36 - 360 rpm Cutter head swivel range: +30 / -45 degrees Cutter head dimensions (standard cutter head), diameter/length: 350 / 375 mm Min./max. center distance workpiece/tool: 50 / 600 mm Center distance workpiece/tool, special version: 50 / 800 mm Max. axial slide travel: 700 mm Max. axial slide travel, special version: 1,000 mm Max. axial slide travel, special version: 1,300 mm Lowest cutter head position above table: 450 mm Table diameter: 800 mm Table bore diameter: 245 mm Table bore depth: 875 mm Max. table speed: 15 rpm Max. table load: 10,000 kg Machine dimensions: Width A: 5,800 mm Length B: 6,900 mm Height C: 4,700 mm Machine weight: 22,000 kg Regarding the current KLINGELNBERG gear inspection data BEFORE grinding: "Pitch and lead are inconspicuous. One measurement shows a borderline or slightly out-of-tolerance fHα deviation in the profile. Please check whether this value is permissible according to the drawing/customer approval or if correction/rework is required. The gears were always forwarded for grinding to the RZ 1000 REISHAUER and processed accordingly. Nevertheless, overhaul of the C-axis is recommended. A cost estimate from GLEASON PFAUTER LUDWIGSBURG is available. Estimated cost: 10,000 EUR."

Condition: like new (used), Year of construction: 2014, operating hours: 8,815 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Heidenhain, rotational speed (max.): 15,000 rpm, spindle nose: BT40, number of slots in tool magazine: 40, 5-AXIS MACHINING CENTER YCM TCV 3000A-5AX TECHNICAL SPECIFICATIONS • Model: YCM TCV 3000A-5AX • Year of Manufacture: 2014 • Control: Heidenhain (5-axis simultaneous) • Travel (X / Y / Z): 3,000 x 800 x 800 mm • B-Axis (Swivel Head): 110º • C-Axis (Rotary Table): Ø 800 mm Fsdpfx Aszcx A Usatepl • Spindle Speed: 15,000 RPM • Tool Taper: BT40 Big Plus • Tool Changer (ATC): 40-station magazine • Through-Spindle Coolant: 20 Bar • Probing Systems: Renishaw RMP60 workpiece probe & Renishaw TS-27R tool setter • Workzone Divider: Partition wall for pendulum machining • Chip Management: Chip conveyor included • Usage: General subcontracting / job shop environment. PRICE AND FURTHER INFORMATION AVAILABLE UPON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKE)

Condition: good (used), Dividing head, dividing apparatus Dividing head, dividing apparatus, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter grinding holder -Manufacturer: Zeatz, dividing head Cabezal Divisor Universal -Tip height: 150 mm -Three-jaw chuck: Bison Ø 160 mm, bore Ø 40 mm Fpjdpfxjt Hmh Se Aatol -Parting head: swiveling 90° -Spindle bore: Ø 28 mm -Dimensions: 470/440/H240 mm -Weight: 61 kg

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 480 mm, • Turret overhauled in 2021 • Coolant pump upgraded to higher pressure/flow rate in 2021 • Draw tube replaced and spindle head newly mounted and ground in 2022 • Prepared for automatic loading of parts via robot cell Control: CNC control including Siemens 840 D color screen TECHNICAL DATA Maximum swing diameter: 550 mm Maximum turning diameter: 480 mm Fpedpowwkx Eofx Aatol Turning length: 1000 mm Spindle bore: 78 mm Drive power (50%): 53 kW Speed range (single stage): 30 – 4000 rpm Drum turret Number of stations: 12, of which powered: 6 Tool shank diameter: 40 mm Speed range (two-stage): 20 – 2500 rpm Tailstock (hydraulic quill adjustment) EQUIPMENT / ACCESSORIES  Full enclosure including work area lighting  Automatic power-operated sliding door  C-axis  Tailstock programmable drag function including various center points  12-position drum turret  Turret drive unit  Chip conveyor  Coolant system with reinforced pump, approx. 4 bar  Interface for automation  Various accessories  1 pc. Heimbuch collet chuck SK 80, without collets  1 pc. Schunk Rota NCF 315 three-jaw chuck  1 pc. Schunk Rota NCF 250 three-jaw chuck  1 pc. Schunk Rota NCF 250 two-jaw chuck  1 pc. WTO broaching head  2 pcs. driven tools CAPTO axial tool  2 pcs. driven tools CAPTO axial radial tool  3 pcs. driven tools CAPTO radial tool  7 pcs. static tool holders  Installation elements  Documentation

Condition: used, Year of construction: 2000, Number of spindles in row: 11 Fedpfoxc Hi Uox Aatjpl Number of horizontal spindles: 3 Cup hinge boring head: yes, Blum Drill pitch: 32mm Power consumption: 2.2kW Drilling unit: swiveling

Condition: excellent (used), functionality: fully functional, ZANGHERI&BOSCHETTI FM 29 S Multispindle Boring Machine – well-maintained, ready for operation Specification: • Technical condition: used, after professional inspection and complete set of seals replaced • Manufacturer: ZANGHERI&BOSCHETTI (under SCM license) • Model: FS 29 S • 29 drill bits • Left/right drilling spindles • 90 cm between outermost drill bits Fpjdpfx Ajymll Deatol • Can operate in vertical, horizontal or any other angle within a 0–90° range • 3 pneumatic clamps • Pneumatic movement of the drilling head • Adjustable drilling depth • Original paintwork • Complete set of guides included • Table size: 120 x 70 cm • Weight: approx. 500 kg • Overall dimensions: 110 x 210 x 140 cm (L x W x H) Additional information: • The machine is in very good technical condition, ready for immediate operation • The photos shown reflect the actual condition of the item for sale • Device can be connected and tested on site • The auction price does not include VAT or transportation costs Financing and transport: • We organize transport via MDD fleet, courier companies, or external carriers • Financial support available in the form of leasing or lease loans

Condition: used, Year of construction: 1992, max. cutting width: 5300 mm, max. cutting height: 2200 mm, saw blade diameter: 300 mm, max. processing thickness: 80 mm, saw blade bore: 30 mm, lower support: fixed rollers, material support: adjustable plastic slats, measuring system: scale, saw head tilt: manual, saw feed: manual, mounting: free-standing, extraction: external extraction system, saw beam locking: manual, weight approx.: 1500 kg, dimensions: 6300 x 1300 x 2900 mm, motor power: 5.5 kW. Storage location: Nattheim Fodpfxoy H E Utj Aatopl

Condition: excellent (used), ELECTRONIC (CNC control) machine, Numerical Control Type NC 500 - Software Tooling System N. 2 Through-feed motorized conveyoring belts - Feeding speed (m/min) 35 - 75 ca. Max. working width (mm) 3200. Min. working width (mm) 215 N. 2 Horizontal units/supports N° 2 Drilling heads for each horizontal unit (11 Spindles for each horizontal drilling head) N. 5 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 x HP 1,8 N. 2 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 x HP 1,8 Fsdpfx Aasyyw S Rotspl N. 4 Vertical top pressure clamps - N. 2 Motorized endless screws to evacuate wastes/chips Quota (axes) digital display. Total installed power (Kw) 62,7 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the vertical movement (Hv) of the 2 horizontal units The CNC controls the movement (X axe) of all the vertical units The CNC controls the movement (Y1 and Y2 axes) of the boring heads The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the pressure clamps The CNC controls the movement (X axe) of the conveyor belts The CNC controls programming of the working cycles

Condition: excellent (used), Universal Milling Head System "HURON" Spindle mount ISO 40 Adjustable on 2 levels Design: Raised, for retrofitting to conventional, NC, or CNC milling machines or boring machines of any type Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 Fpsdpfxev R U Ncj Aatjl DE - 44143 Dortmund - Wambel

Condition: excellent (used), functionality: fully functional, POINT TO POINT BORING machine with CN model MASTERWOOD SPEEDY 207 second hand machine for custom furniture manufacturing, kitchen furniture, bathroom furniture, and various processes Boring head with 5 independent vertical chucks and 1 double horizontal chuck Saw for longitudinal cuts Machine table with 1390 x 750 mm boring capacity and two side jump up stops handled by the control unit to execute with only one program and one intermediate hold panels up to 2800 x 750 mm size Possibility of boring 2800 mm panels Fpjdpfx Aaowd Irvjtsl Pneumatic tool displacement mm 60 Max panel thickness mm 50 Spindles rotation rpm 4500 Saw rotation rpm 6000 Vacuum pump motor Hp 1,5 Vacuum cup diameter mm 80 Front stop complete with 4 locking cylinders for drilling narrow workpieces and strips Multitasking control complete with interactive graphic programming, 9" video, boring programs, optimizing working cycle, graphic, parametric, diagnostic modes Overall dimensions - Machine : mm 2500 x 1800 x 1800 h - Weight kg 850 Overall dimensions - Electric board : mm 800 x 520 x 1200 - Weight Kg 120

Condition: like new (used), Year of construction: 1992, Lathe WEILER Precision center lathe in ergonomic design The Weiler Ergodor is the first German ergonomically designed lathe. It creates a more humane workplace and prevents health problems. The key feature is that the employee can operate this lathe while standing or sitting. Technical data Fpsdpfx Aasvgqu Hjtel Center width 470 mm Turning length 430 mm Center height 145 mm Rotation Ø over cross slide 160 mm Rotation Ø over bed 300 mm Spindle head, short taper flange Bayonet mounting DIN 55022 size 5 or Camlock clamping D 1-ASA-4 Spindle bore 36 mm DIN 55022 size 5 Spindle inner taper Spindle speeds Speeds 30 - 3550 rpm S Speeds 15 - 3550 rpm Brake motor 3 kW Brake motor 1.5/3 kW Face slide travel 150 mm Travel of the top slide 100 mm Feed rates and thread pitches on the gearbox switchable steps 30 Section 2 1.5/3 kW 38 Gear ratio in headstock 3 20 Long feeds 150 mm via change gears 100 mm via toothed belt Face feeds = 1/2 Longitudinal feed values Metric pitches 0.2 - 12 mm Module pitches 0.1 - 4 Dimensions 1450 x 640 x 1500 mm Dimensions 1450 x 640 x 1500 mm Net weight 1000 kg Acceptance according to toolmaker's accuracy DIN 8605 20 Built according to the rules of occupational safety, official test no. A. EM 11 1545/80. Encombrement 1450 x 640 x 1500 mm

Condition: good (used), Year of construction: 1995, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 140 mm morse taper 3 Kurzspindel MK table: 420 x 350 mm turning speeds 160 - 2250 U/min column diameter 115 mm throat 293 mm distance spindle /table min 117 / max 701 mm T-slots 2 x 14 x 224 Fedpfxjzl E Uuo Aatepl total power requirement 1.45 / 1.90 kW weight 370 kg dimensions of the machine ca. 1200 x 800 x 1840 mm Current list price ~ 12.500 euros Special price available upon request Features: - Sturdy column drill press (V-belt) - stepless speed adjustment - pole-changing drive motor - height-adjustable worktable * with 2 T-slots - R/L rotation of the drill spindle (reversing switch) - Main switch with motor protection switch - Mushroom-head pushbutton (latching) for EMERGENCY STOP - Operating instructions (PDF)

Condition: good (used), Year of construction: 1997, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 140 mm morse taper 3 MK table: 415 x 350 mm turning speeds 160 - 2.250 U/min column diameter 115 mm total power requirement 1.45 / 1.90 kW weight 285 kg range L-W-H 500 x 800 x 1920 mm Features: - Heavy-duty column drill press - Continuously variable speed control (V-belt) - Pole-changing motor - Fixed drilling depth stop - Machine table with 2 T-slots * Height-adjustable via hand crank - Mushroom-head pushbutton (latching) for EMERGENCY STOP Fodpfx Aozl E T Reatspl - Reversing switch for clockwise and counterclockwise rotation - User manual (PDF)

Condition: good (used), Thread cutting machine, pipe thread cutter, thread cutting head, thread cutting chuck, thread chuck, thread cutting apparatus Fpodpfx Aowq Nvioatel -Manufacturer: Rems, thread cutting head -Pipe size: 2 1/2 to 4 inches -Spindle bore: dimensions see pictures -Dimensions: 410/400/H340 mm -Weight: 50 kg

Condition: excellent (used), functionality: fully functional, WMW Heckert ZFWVG 250×1250 No. 71740386401 Long thread and spline milling machine, also for gear cutting. (Thread milling and spline shaft hobbing machine) Max. workpiece diameter: 250 mm (the machine can swing up to 500 mm above the bed/support) Milling length (Z-axis): 1250 mm Tailstock height above bed: 260 mm Spindle diameter (bore): 102 mm Max. module: Up to module 10 / 18 (depending on the specific head configuration) Spindle speed: 45 – 560 rpm Total power consumption: 9.5 kW Fpjdpfjzxn Anex Aatel Machine weight: Approx. 3,800 kg

Condition: excellent (used), Hettich hinge boring machine, 380V power supply, vertical and horizontal drilling, 3 drilling heads, rotatable heads, parallel (row of holes) or perpendicular positioning, pneumatic feed of drilling head. The condition of the drill is very good. Fodpfx Aeyt Iclsatspl

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-201-08-1422, functionality: fully functional, operating hours: 17,952 h, number of slots in tool magazine: 24, working width: 1,600 mm, spindle motor power: 15 W, number of spindles: 2, working length: 4,760 mm, Machining center with automatic material handling (serial number: 0-205-08-1424) TECHNICAL DETAILS Travel in X-axis: approx. 4,760 mm Travel in Y-axis: approx. 1,600 mm Main spindles: 2 Power of main spindles: 15 kW each Tool interface: HSK F63 Number of drilling heads: 2 Tool changer: 2 × 12-position Fpodezx Anfjpfx Aatel MACHINE DETAILS Control system: PC85 / woodWOP Operating hours CNC: 17,952 h EQUIPMENT Automatic AP console tables Chip and waste disposal Safety enclosure Associated HOMAG handling and return conveyor system Portal handling Vacuum crossbar Conveyor technology C-axes FLEX-5 preparation Automatically positionable vacuum clamps Liquid ring vacuum pumps Note on machine designation: BOF 712/48/16/AP was the actual historical machine type. CENTATEQ E-500 is the later/current model designation, which is now visible on the machine.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, spindle speed (max.): 4,000 rpm, Control system: Siemens 828 D Drive spindle Speed: 4,000 rpm Power: 9 kW Maximum torque: 110 Nm Chuck diameter: 210 mm Spindle bore: 53 mm Spindle nose: A2-5'' Fsdpfszrghvex Aatspl Working area Distance between centers: 1,000 mm Center height: 240 mm Swing over bed: 470 mm Swing over compound slide: 200 mm Swing over cross slide: 430 mm Z-axis travel: 1,065 mm X-axis travel: 220 mm Tool system Turret: PARAT 4-position turret head RD 2 Tailstock Technology: Follow-type Centering point: MK-4 (rotating) Steady rest Technology: Traveling Diameter range: 12 mm - 50 mm Equipment Chip management: Chip tray Coolant supply: Coolant pump, 7 bar Additional feature: Adapter plate PARAT RD-2 with internal cooling Chuck: SMW wedge-type chuck (D = 210 mm) Jaw set: 1 set of hardened jaws Footprint (L x W): 2.91 m x 1.24 m

Condition: used, Technical details: spindle diameter: 150 mm x-travel: 3000 mm y-travel: 2000 mm Fpedey Anpxspfx Aatjl spindle stroke: 700 mm dimension of the ram: 340 x 340 mm ram stroke: 700 column travel: 1500 mm spindle taper ISO: 50 bore spindle turning speed range: 3,2 - 1600 U/min table surface area: 2000 x 2500 mm max. table load: 25000 kg rapid speed: 5 / 10 m/min feed speeds: 1 - 5000 mm/min total power requirement: 100 kW weight of the machine ca.: 57 t dimensions of the machine ca.: 8,4 x 6,8 x 5,9 m with CNC SIEMENS 840 D full B-axis aerostatic guideways facing head ( 3,2 - 140 rpm ) angular milling head 1000 Nm coolant attahcmnet with internal cooling supply *

Condition: excellent (used), Forza Model 71510 - Boring MILLING HEAD FORZA SOLO MANDRINO 85 mm The single spindle milling head is an essential component in machining operations, specifically designed to be the operational core of a milling head. This device is characterized by its robustness and precision, since it is in charge of holding and rotating the cutting tools, such as milling cutters, drills or reamers, without including the chuck or the milling cutter holders. Its design allows for easy adjustment and tool change, which makes it an essential part in any milling process that requires high precision and efficiency. Manufactured with high quality materials, such as hardened steel, the spindle guarantees the stability of the tools during milling operations, minimizing vibrations and ensuring a high quality finish on the parts being machined. Weight: 26.4 Kg FORZA DRILLING CONES Ref. 714140 / 714150 Trailing cones for milling heads are essential components in machining operations that require superior accuracy and stability. These cones are devices that attach to the milling head and serve to secure the workpiece or cutting tool during the milling process. They are made of high-strength materials, such as hardened steel, and designed to withstand the high cutting forces generated during milling. CLAMP Diameter: 265 mm Inside diameter from edge to edge : 190 mm Distance between points: 108 mm Diameter of points: 13 mm Rim diameter: 35 mm Fpedpfx Aju Ndl Ioatel MILLING HEAD FORCE CLAMPS - 14mm / 10 mm / 7 mm

Condition: good (used), Year of construction: 2005, travel distance X-axis: 12,000 mm, travel distance Y-axis: 3,500 mm, Technical Specification - X-axis (longitudinal travel - table): 12,000 mm - Programmable feed rate: 0.5 – 6,000 mm/min - Rapid traverse: 20,000 mm/min - Motor speed: 3,000 rpm - Y-axis (vertical travel / column): 3,500 mm - Programmable feed rate: 0.5 – 6,000 mm/min - Rapid traverse: 20,000 mm/min - Motor speed: 3,000 rpm - Rated torque (motor): 42 Nm Z - W-axis (spindle head): - Boring spindle diameter: 150 mm - Axial stroke of boring spindle (Z): 1,200 mm - Rapid traverse Z-axis: 20,000 mm/min - Internal taper of boring spindle: DIN 69871, ISO 50 - Spindle diameter: 254 mm - Spindle front bearing inner diameter: 200 mm - RAM dimensions: 400 x 400 mm - Axial stroke of boring spindle (W): 1,000 mm - Rapid traverse W-axis: 15,000 mm/min - Total axial stroke (Z+W): 2,200 mm - Rated torque spindle motor W and Z-axis: 42 Nm - Number of spindle gearbox speeds: 2 - Spindle speed range: 6 – 3,500 rpm - Spindle motor power: 60 kW Clamping plate sections: - Dimensions: 2 units @ 1,500 x 4,500 mm, 1 unit 2,000 x 4,500 mm - Load capacity: 15,000 kg/m² Workpiece table (axes V1 - B1 / V2 - B2): - Table dimensions: 2,000 x 3,000 mm - T-slot size: 28 mm - T-slot pitch: 180 mm Fpodjyuxd Nspfx Aatel - Table top height from floor: 650 mm - Load capacity: 40 t Tool rack magazine ATC 13-150 R 147 - Maximum magazine capacity: 147 tools - Maximum tool weight: 35 kg - Maximum tool length: 700 mm - Tool taper: DIN 69871 - Tool change time: 28 sec Milling head with indexed vertical axes, model TTL 2 18 360 - Tool holder: ISO 50, DIN 69871 EQUIPMENT: - CNC control: Heidenhain iTNC 530 - Electronic handwheel - Chip conveyor (manufactured: 2023) - CE marking - Documentation

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Weiler Matador VS-2 lathe with lead screw and tailstock, featuring a 3-axis digital display from Elesta, from a training workshop!! Technical data: >> Machine no. 88-8115, year of manufacture 1988 >> Center height 140 mm Fpsdpfxey Tmkvs Aatel >> Center distance 500 mm >> Speed: 15 – 3550 RPM >> Spindle bore 36 mm >> Short taper spindle head DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> 3-axis digital display Elesta >> Quick-change tool post, internal and external collets (see picture) >> 1 three-jaw chuck, 1 set of jaws >> Mulifix size A with 3 steel holders >> Spindle guard >> 1 bed stop >> Change gears >> Follow rest >> Machine feet About the machine: A Weiler Matador VS-2 in very good condition is offered for sale. The machine is fully functional. The slides all move smoothly and evenly. Even at high speeds, the Weiler runs smoothly. The original location of the Weiler was a training workshop. The machine is equipped with a wide range of accessories. Take the opportunity to inspect this machine on-site while it is powered up and to convince yourself of its very good condition.

Condition: good (used), Year of construction: 2014, functionality: fully functional, turning length: 760 mm, turning diameter: 376 mm, spindle speed (max.): 3,500 rpm, quill diameter: 78 mm, overall weight: 6,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore: 86mm With jacket tube.:78mm Turret head: 12 main positions 12 secondary positions, BMT65 connection, Programmable hydraulic tailstock: MT5 Main spindle power: 22kW S1max=3500 1/min Fodpeykikxsfx Aatspl Living tool power: 5.5kw S2max=5000 1/min X movement range: 260mm Z axis movement range: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed: 30m/min Automatic tool measurement with probe arm Weight: 6000 kg