Used Bread Cutting Machine for sale (84,455)

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 700 mm Measurements depth 1054 mm Measurements height 978 mm Machine weight 197 kg This Thermal Dynamics UltraCut 200 was manufactured in 2012. It features a robust output current range of 10-200 A and a duty cycle of 100% at 200 A, ensuring continuous operation. The cutting capacity on mild steel reaches up to 40 mm with a maximum edge start of 65 mm. It includes a liquid-cooled XT-300 precision torch and a DFC-3000 digital gas console with touchscreen. For more information about this machine, please reach out to us. Application Types Lsdpox D Ixasfx Aanjak Cutting

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 44,500 h, laser source model: CV5000, TECHNICAL DETAILS Laser: CV5000 MACHINE DETAILS Ljdpfxox Hfcqs Aanjak Operating hours: 44,500 h Note: Information regarding the machine's layout can be found in the attached document.

Condition: used, Year of construction: 2023, CNC Gantry Plasma Cutting Machine with Rotator Manufacturer: Microstep Model: MasterCut 6001.30PtkG Year of manufacture: 2023 CNC control system Working area: 3,000 x 6,000 mm Lodpfoxu U Ddsx Aanjak 1 plasma torch with Kjellberg Q3000 power source 1 oxy-fuel torch GCE FIT+ three (cutting gas: acetylene) Burning table with sectional exhaust system 6,000 x 3,000 mm "MasterCut" plasma rotator with fully automatic support ACTG automatic calibration unit for the beveling aggregate Kemper exhaust system 8000 (year 10/2015) Asper Basic 2D programming software + Asper BevelCut programming for bevel cuts Other technical data: MicroStep machine control with MMI console and 24" touchscreen iMSNC module expert system iMSNC module for automatic calibration of mechanical probing iMSNC module assistant for loading CNC programs LCD operating unit on the gantry Laser pointer with automatic offset transfer USB 3.0 interface for storage device MicroStep RemoteDiagnostics remote maintenance module Grate cover in the burning table Reinforced version of the burning table Connection of fine plasma source to CNC control Control for automatic gas console Electrical and mechanical torch height sensing LED signal tower on the gantry bridge (2 colors) Tactile shutdown device for guide rails Light barrier safety (collision protection) on gantry bridge via emergency stop Smart Z Movement ACTG Calibration Report Oxy-fuel support fully automatic Automatic gas console for oxy-fuel torch (cutting gas: acetylene) Active collision protection

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: 6390312, Format (cm): 55 Equipment / Additional information: Laodpfjxugv Sex Aanjk Side tables, safety barriers, 1xreserve knife

Condition: excellent (used), Year of construction: 2016, Ref: 11047 . 2016 EBA 721-06 LT Guillotine 72cm Automatic guillotine. Equipped with: Electro-mechanical blade drive Hydraulic clamp drive Infinitely adjustable clamping pressure (250-2000 kgs) with optical indicators Snap-in false clamp plate with optical indicator Ledsx Nfr Rspfx Aaneak Spindle guided electro-mechanical back gauge drive for precise positioning Air table on front and rear table Foot pedal for pre-clamping or cutting line indicator Optical cutting line indicator with LEDS Durable stainless steel working surface on front table HSS steel knives Swing cut for more cutting precision Adjustable solid steel blade carrier guided on both sides Adjustable blade depth Stainless steel side tables (left and right) Electronically guarded front table area by photocell safety guard Transparent safety cover on rear table Two-hand safety activation with repetition blocking and control for synchronous operation Automatic return of blade and clamp from every position Main switch, safety lock and key Blade changing device with covered cutting edge Knocking-up device Features: 99 programs with up to 99 steps each Up to 9 repeat measurements can be integrated in one program step Program runs automatically – with electronic cutting monitor 10-button-keyboard for pre-setting of measurement 3 memory buttons available for individual measurement setting Electronic digital display with an accuracy of 1/10 mm ‘Set Function’ key for reference measurement Electronic hand wheel with infinitely variable speed for Fine adjustment of back gauge Push buttons for fast back gauge movement (forward and reverse) Automatic measuring correction in case of back gauge displacement Memory key for repeat cuts (manual) and additional automatic memory Paper eject function with and without program mode (advancing programmable) Delete and insert mode for correcting and modifying programs Integrated calculator Self-diagnostic system with error indication on display Metric and imperial changeover Specification: Cutting width: 720mm Cutting height: 80mm – 781mm Insertion depth: 720mm Front table depth: 530mm Minimum cut: 20mm – 901mm Back gauge speed: 53 mm/s Dimensions W x D x H in mm 1305/21002 x 1500/16002 x 1335

Condition: new, Year of construction: 2024, CNC plasma cutting machine PCV-3015-D The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1520 x 3100 mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3650 mm - Width: 2280 mm - Height: 1500 mm - Total mass: 1100.0 kg - Maximum load: 1800.0 kg - Adjustable support legs: 6 pcs Systems THC – Torch Height Controller – The integrated cutting height control system automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the programme information about the angle of the material in relation to the table. Assistance by a specialist Ljdpsiuktlofx Aanoak We are committed to staying in continuous contact with our Customers; therefore, we meet this challenge by offering a package of hours to be used for the Otinus Professional Assistance within every machine purchased. Otinus Academy This is a constantly growing e-learning platform created for Otinus brand Clients. By purchasing this machine you will gain a year access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Supplied with machine Installation of the machine and training in the use of the machine at our Clients' sites. - 1 day, up to 8 hours - installation of the machine and learning to use the controller. Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Year of construction: 2001, condition: ready for operation (used), Main Drive Laser power 2500 w Number of axis 3 Movement X-Axis Movement 3000 mm X-Axis Rapid Traverse 40 m/min Y-Axis Movement 1500 mm Y-Axis Rapid Traverse 40 m/min Z-Axis Movement 150 mm Z-Axis Rapid Traverse 20 m/min Main Drive Laser power 2500 w Number of axis 3 Movement X-Axis Movement 3000 mm X-Axis Rapid Traverse 40 m/min Laedex D Rpnopfx Aanek Y-Axis Movement 1500 mm Y-Axis Rapid Traverse 40 m/min Z-Axis Movement 150 mm Z-Axis Rapid Traverse 20 m/min This 3-axis Prima Industrie Platino 1530 PL 9000 was manufactured in 2001. It features a CO2 laser cutting machine with X-axis travel of 3000 mm, Y-axis travel of 1500 mm, and Z-axis travel of 150 mm. Maximum linear speeds reach up to 40 m/min on the X and Y axes, and 20 m/min on the Z-axis. If you are looking to get high-quality cutting capabilities, consider the Prima Industrie Platino 1530 PL 9000 machine we have for sale. Contact us for more information. Application Types Cutting

Condition: used, Photo-optical Oxy-Fuel Cutting Machine ESAB Type ULTRAREX UXC 15/20 Serial No.: 73839 Year of Manufacture: 1993 Track Length: 4000 mm Cutting Width: 1530 mm Cutting Length: approx. 3300 mm Cutting Speed: approx. 100 - 900 mm/min Cutting Thickness: 3 - 200 mm Number of Torches: 2 units Power Supply: 230 Volt, 50 Hz - Photo-optical trailing control A5-AK5 - Drawing table movable on guide rails (width 1500 mm) - Motorized torch height adjustment - Manual torch lateral adjustment - Electric valves for acetylene and cutting oxygen - 2 oxy-fuel cutting torches for acetylene and oxygen - Track length 4000 mm, split in the middle (2 x 2 meter sections) - Cutting table: 4000 x 2000 mm, height 750 mm Bridge Length: 4000 mm Required space (L x W x H): 4000 x 4000 x 2100 mm Weight of cutting machine: 420 kg (without the blue plate) Lajdew Nrhqopfx Aansk Weight of cutting machine: approx. 400 kg Weight of cutting table: approx. 500 kg Total weight: approx. 900 kg Good condition The blue base plate is not included in the scope of delivery (weight of the plate: 475 kg)

Condition: used, Year of construction: 2017, CNC gantry plasma cutting machine (bevel unit) with oxy-fuel torch Manufacturer: Zinser Model: 2425-I/3600 Laodpfx Aaow Rpvbenok Year of manufacture: 2017 CNC control: 5010 Runway length: 11 m Cutting table with oscillating conveyor, including extraction system Dimensions: 2,000 x 8,000 mm 1 plasma torch with Hypertherm XPR300 power source automatic gas console incl. automatically rotating plasma bevel unit Bevel System 2015/350 1 oxy-fuel torch Filtration unit Downflow 3DFP9-SP Power: 9 kW Laser diode 161225ä

Condition: used, Philipp high-performance cross-cutting and ripping machine or double cross-cutting system for recutting untrimmed models. The system measures, cross-cuts, and trims models after a log band saw or similar. The exact scope of delivery of the mechanization is to be agreed upon. The system is still in operation and can be inspected. Disassembly must be completed approximately by the end of September 2025. Special price ex-site. workpiece length: 1,500 – 5,000 mm workpiece width: 200 – 1,000 mm workpiece height: 45 – 160 mm Lodew Nnwhjpfx Aaneak

Condition: excellent (used), Year of construction: 2017, Ref:11049 . 2017 Ideal 5221-95 EP Guillotine. 52cm programable guillotine Equipped with: Electro-mechanical blade and clamp drive Power ‘EP’ back gauge Control module Electronic hand wheel for manual back gauge positioning Infinitely variable speed control (from very slow to very fast) Optical cutting line Adjustable back gauge with narrow separations and plastic gliders Two side lays each on front and rear tables High-quality blade made from “Solingen steel” Solid steel blade carrier and adjustable blade guides Automatic clamping system, guided on both sides for evenly distributed clamping pressure Clamp can be lowered or raised independently from blade Machine and stand can be separated for transportation through narrow doors (70 cm) Side tables (left and right) SCS (Safety Cutting System): hinged, electronically controlled safety guard on the front table Transparent safety cover on the rear table Main switch and safety lock with key Electronically controlled true two-hand operation 24V controls (low voltage) Disk brake for instant blade stop Blade changing device with covered cutting edge Blade depth adjustment from the outside of the machine Easy blade change from the front of the machine without removing covers. Digital display for measurement readout in cm or inches (display accurate to 1/10 mm or 1/100 inch) 10-button keypad for presetting of measurement Memory key for repeat cuts | 9 programs with 9 steps in each program (up to 9 repeat cuts can be integrated into a program as one single program step) Setting of program steps via “Start” button ‘SET’ function key for reference measurement Programmable eject function – for pushing out the paper Two programmable keys for quick setting of frequently needed measurements Self-diagnosis system with error indication on display Specification: Cutting length: 520 mm Lodpfx Aex Nfr Dsanjak Cutting height: 80 mm Narrow cut: 35 mm Table depth: 520 mm Power supply: 230 V / 50 Hz

Year of construction: 2014, condition: ready for operation (used), Additional Equipment Bundleloader: 6.5 meters Steploader: 6.5 meters Output with Conveyor Belt: 6.5 meters at the front, 4.5 meters at the back This BLM Adige LT8 4kW Co2 was manufactured in 2014. It features a Rofin DC035 3.5kw laser source and is equipped for tube cutting with a 3D cutting head. It handles materials up to 12mm thick and 206mm round, with lengths up to 6500mm. Consider the opportunity to buy this BLM Adige LT8 4kW Co2 tube cutting machine. Contact us for more information about this machine. Application Types Cutting Lasdpfxjx H A Rxs Aanok

Condition: used, Year of construction: 2012, CNC Laser Cutting System Manufacturer: Microstep Model: FibreLas MSF 3001.15L Year of manufacture: 2012 CNC control: iMSNC Windows Operating hours (laser): approx. 4,000–5,000 Laser power: 2.5 kW Working area: 3,000 x 1,500 mm Maximum sheet thickness (steel): 15 mm Maximum sheet thickness (stainless steel): 8 mm Maximum sheet thickness (aluminum): 8 mm Lodox Eh Dropfx Aansak Operating temperature: +10 to +30 °C and max. 90% relative humidity (at 20°C) Extraction duct (left & right): left outlet Ø 250 mm Laser source: IPG Ytterbium Laser System YLS 2.5 kW Laser cooler: LC 170.01-A.3.5 Voltage: 400 V / 3-phase / 50 Hz Filtration unit: TEKA 4H 5.5 kW Overall machine dimensions: approx. 10,400 mm x 3,610 mm

Condition: ready for operation (used), Year of construction: 2017, Media Power consumption 4.0 KVA Additional Equipment Energy chain for plasma operation Environmentally friendly extraction system with sectional distribution Automatic gas console for monitoring and controlling gas flow and pressure Lajdpfx Aox D R S Aeanok This ZINSER 2425-I/3600 plasma cutting machine was manufactured in 2017. It features a CNC-controlled system for both plasma and oxyfuel cutting, handling materials up to 35 mm thick and pipes from 100 to 620 mm. The machine offers a working area of 2000 x 8000 mm and includes advanced features like a 3D plasma cutting system, CNC path control, and an integrated network card for enhanced connectivity. For more information about this machine, please reach out to us. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2021, This ESAB Suprarex HD 4000 plasma cutting machine was manufactured in 2021. It features a track width of 4000 mm and a track length of 12000 mm, supporting a maximum working length of 9000 mm. The machine is equipped for both oxyfuel and plasma cutting, handling material thicknesses up to 200 mm. If you are looking to get high-quality cutting capabilities, consider the ESAB Suprarex HD 4000 machine we have for sale. Contact us for more information. Application Types Cutting Ledpfx Aaox D D N Uoneak

Year of construction: 2013, operating hours: 23,265 h, condition: ready for operation (used), Main Drive Laser power 5 kW Workpiece Workpiece X 3000 mm Workpiece Y 1500 mm Laedpfx Ajx D Hg Aoanjk This TRUMPF Trulaser 5030 Fiber was manufactured in 2013. It features a closed frame, torque drive, linear direct drive, and a TruDisk 3001 solid-state laser. Equipped with an automatic pallet changer, 17-inch touch screen, and integrated camera for process monitoring. Ideal for precise fiber laser cutting. If you are looking to get high-quality cutting capabilities consider the TRUMPF Trulaser 5030 machine we have for sale. Contact us for more information about this machine. Application Types Cutting

Year of construction: 2013, condition: ready for operation (used), Main Drive Laser power 4 kW Additional Equipment Air dryer with filter Documentation (1 copy on CD) T eleservice module (incl. modem and installation) CAM MAESTRO Windows. Dongel license on the USB PORT / MAESTRO software package includes: - Nesting module .dwg Import / .dxf Multiimport - CycleTimeLight “Quick Piercing” oil spraying device Lodpfx Aex D N Tleaneak Automatic pallet changer T yp P A Nozzle changer Scrap conveyor Extraction system (2. 400m3) This Prima Power CP 4000 Zaphiro Laser Cutting machine was manufactured in the year 2013 and has 37978 laser hours. The machine has a laser power of 4 kW. Application Types Cutting

Year of construction: 2021, operating hours: 66,828 h, condition: ready for operation (used), Main Drive Laser power 2.5 kW Additional Equipment Automatic tube bundle loader for initial lengths between 3200 and 6500 mm Laedpsx D Nnijfx Aanek Loading with an overhead crane possible 4000 kg loading capacity Special lift loader equipment for square, rectangular, and flat-oval tubes Tube separation with length measuring station Equipment for a 6500 mm bundle loader for pipes with sensitive surfaces Artube nesting software included This ADIGE LASERTUBE LT722D was manufactured in 2021. It's designed for laser processing of tubes, handling materials like mild steel and stainless steel. It supports various tube shapes, including round, square, and rectangular, with dimensions up to 140 mm. Features include a PRECITEC AK-HP cutting head, automatic tube bundle loader, and a robust unloading system. Ideal for high-quality laser cutting operations. Contact us for more information about this machine. Application Types Cutting

Year of construction: 2014, operating hours: 40,236 h, condition: ready for operation (used), General Data Ledpfx Aaex D Dxcsnjak Machine weight 15000 kg Measurements height 2500 mm Dimensions Machine Length 12900 mm This Bystronic Bysprint Fiber 4020 was manufactured in 2014. It features a large cutting area with dimensions up to 4064 mm by 2032 mm and a maximum cutting thickness of 20 mm for steel. The machine supports a fiber laser source with 6000 W power, ensuring precise and efficient cutting. Consider the opportunity to buy this Bystronic Bysprint Fiber 4020 fiber laser cutting machine. Contact us for more information. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2019, General Data Measurements width 4950 mm Measurements depth 3900 Measurements height 2500 mm Machine weight 2700 kg Main Drive Number of axis 3 Workpiece Laodpfjx D Sktsx Aansk Workpiece X 3000 mm Workpiece Y 4000 mm Workpiece Z 300 mm Workpiece weight 800 kg/m² Additional Equipment Installation and Assembly Service Toolbox 3-day Training for up to 4 people Retrofit between 2020-2023 This 3-axis STM WS3040 waterjet cutting machine was manufactured in 2019. It features a large effective cutting area of 3000 x 4000 mm, dual Z-axis CNC for enhanced precision, and is equipped with advanced NUM FLEXIUM plus 3D 5-axis control. Additional highlights include LED work area lighting, a high-pressure Servotron pump, and comprehensive safety technology. If you are looking to get high-quality cutting capabilities, consider the STM WS3040 machine we have for sale. Contact us for more information. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2023, General Data Measurements height 1600 mm Dimensions Machine Length 1800 mm Main Drive Spindle Speed 1800 RPM Spindle motor power 45 kW Movement X-Axis Movement 2050 mm Z-Axis Movement 200 mm Y-Axis Movement 3050 mm This H.G. Ridder Waricut HWE 3020 2 2 D Retrofit was manufactured in 2023. It features two cutting heads, each capable of a maximum travel of 2,450 mm. Key specifications include a travel range of 2,050 mm (X) and 3,050 mm (Y), with a Z-axis travel of 200 mm. It boasts a maximum linear speed of 20 m/min and an installed drive power of 45 kW. Contact us for more information about this waterjet cutting machine. Lodex D Ik Aopfx Aaneak Application Types Cutting

Year of construction: 2015, operating hours: 22,192 h, condition: ready for operation (used), Control Unit Brand FANUC Additional Equipment Scope of delivery includes: Machine /Laser source / Cooler / Extraction unit / Various wear parts such as nozzles and lenses/ Additional lens holders This LVD Sirius 3015 PLUS was manufactured in 2015. A robust CO2 laser cutting machine, it includes an automatic nozzle changer and has logged 22,192 operating hours. The package comes complete with a laser source, cooler, extraction unit, and various wear parts including nozzles, lenses, and additional lens holders. If you are looking to get high-quality cutting capabilities consider the LVD Sirius 3015 PLUS machine we have for sale. Contact us for more information about this machine. Laedpfx Aajx D E Ifensk Application Types Cutting

Condition: ready for operation (used), Year of construction: 2019, operating hours: 5,800 h, Table Lasdpfx Ajx D N Aaeansk Table load 7500 kg This VOORTMAN V320 was manufactured in 2019. It features a Kjellberg Smart Focus 300 plasma source and a Donaldson DFPR06 extraction system. Capable of handling mild steel with a panel length range of 850 – 6,100 mm and thickness from 6 – 75 mm. It includes options for punch marking and countersinking, enhancing versatility. Consider the opportunity to buy this VOORTMAN V320 plasma cutting machine. Contact us for more information about this machine. Application Types Cutting

Year of construction: 2009, operating hours: 69,572 h, condition: ready for operation (used), General Data Measurements width 2914 mm Measurements depth 7105×× Measurements height 2010 mm Machine weight 10100 kg Main Drive Number of axis 3 Media Power consumption 30 kW This 3-axis AMADA LC 3015 F1 NT CO2 laser cutting machine was manufactured in 2009. It has a mass of 11.4 tons and requires 98 kVA of power, with a laser capacity of 4.0 kW. If you are looking to get high-quality cutting capabilities, consider the AMADA LC 3015 F1 NT machine we have for sale. Contact us for more information. Lajdpex D Enlofx Aanek Application Types Cutting

Condition: ready for operation (used), Year of construction: 2008, General Data Measurements width 540 Measurements depth 960 mm Measurements height 1050 mm Lasdpfjx D Hqusx Aanek Machine weight 196 kg Table Outer length 4500 mm Outer width 2000 mm This plasma cutting machine was manufactured in 2008. It features a CNC control MSNC500P Windows and a plasma source with a cutting range of 0.5 to 25/30mm, adjustable from 10 to 160 A for cutting. The flame cutting table measures 4500x2000mm, suitable for both plasma and oxyfuel cutting. It operates efficiently within a temperature range of +5 to +45 °C. Consider the opportunity to buy this MicroStep SPL-P 4501.25 plasma cutting machine. Contact us for more information about this machine. Application Types Cutting