Condition: excellent (used), Year of construction: 2002, Knife Metalmaster 4020
Working area: 2000mm x 4000mm
1 x Plasma Kjellberg Hifocus 100 I .
Including Tehno filter system BFK 40 , year of manufacture 2019
Condition: excellent (used), Year of construction: 2018, (standard equipment: servo cutting with a 550mm blade, automatic positioning between angles of 30 - 150 degrees with servo, Control unit - industrial PC with Windows and touch screen, protective cabin for cutting and processing, load capacity up to 10 lag of the profile, high working speed of setting axis, the ability to process 4 different profile surfaces, servo axis rotation, data transfer via ETHETNET and USB, adjustable disc extension speed).
Motor power - 3 kW / 4 HP
Engine speed - 3000 rpm
Blade diameter/thickness - Ø 550 mm / 4.4 mm
Motor power - 3 kW
Cooling type - Fan
Motor rotation - 18000 rpm
Number of spindles - 4
Power - 17.55 kW
Current - 82.35 A
Voltage / Frequency - 400 V / 3~, 50-60 Hz
Air pressure - 6-8 bars
Air consumption - 250 lt/min
Recommended cutting material - Aluminum / Pvc
X axis (longitudinal) - min 270 mm - max 3000 mm
Y axis (horizontal) - min 30 mm - max 150 mm
Z axis (vertical) - min 30 mm - max 180 mm
A axis (rotation) - 30° / 150°
SR axis (Feeding robot) - min 1200 mm - max 6500 mm
X axis (longitudinal) - 64 m/min
Y axis (horizontal) - 64 m/min
Z axis (vertical) - 40 m/min
TZ axis (Vertical saw) - 23 m/min
TA axis (Saw angle) - 48°/sec
SR axis (Feeding robot) - 130 m/min
Condition: new, Year of construction: 2023, FULL AUTOMATIC SERVO SYSTEM ALUMINUM - PVC CUTTING, DRILLING AND DRILLING MACHINE
GENERAL FEATURES :
The feed rate of the servo – contrlolled saw in the Z axis can be adjusted precisely according to the profile
The aluminum profile is cut to the desired size with a servo-controlled robot arm.
Ø500 saw is used.
The saw speed is 3000 rpm.
The robot arm drag and drop system allows precise cutting of long-length profiles.
Cutting-drilling and threading operation continues until the end of the profile with automatic cycle after the profile is placed.
It provides high guality and easy cutting
A high level of security is provided by the magnetic safety switch and piston on the covers
All movements of the machine are servo system.
Drilling unit x – y – z movements are servo.
Optional spindle can be added for drilling from different angles.
Chip extraction system is available
There is a spray cooling system in the saw and drilling unit.
Air consumption: 30 lt/min
Total kW: 3.8 kWh
OMRON PLC Control system
SMC - FESTO pneumatic system
Possibility to create a cut list
Condition: repair required (used), Year of construction: 2001, Comes for sale:
1 piece used laser cutting machine
Manufacturer: Messer welding + cutting GmbH
Type: Multilas 6020
Laser: Fanuc C4000
working width: 2.000mm
Working length: 6.000mm
Laser power 4.000W
Lasermatic cutting head HP2
Current: not in function
Board defective Zero points cannot be set
Machine can be inspected on site under power.
Condition: ready for operation (used), Year of construction: 2000, Track width: 3100mm, connected load: 2.8kVA, with power source Hyperterm HD 3070 and spare parts, without documentation, sheet metal storage is available, on-site inspection is possible.
Condition: good (used), Year of construction: 2017, CNC Portal Plasma Cutting Machine
Manufacturer: Lind Cutting
Type: King P4000
Year of manufacture: 2017
track width: 4.000 mm
track length: approx. 15 m
working area: 2800 x 12000 mm
without suction table
1 x plasma chamfering unit Pro Cut 2D-N
power source Kjellberg HiFocus 440i
Filter system Kompac Air 325 660 4x4/o 18.50 KW
Condition: excellent (used), Year of construction: 2003, Operating hours: 1,930 h, machine/vehicle number: 11150001077, Functionality: fully functional, DML 40 SI laser machine with filter unit and laser cooler
Comprehensive maintenance last carried out in 2020.
Load of the table: max. 50kg
Laser class: 4
Wavelength: 1064 μm
Nominal power: 100 W cw with 4 mm aperture
Nominal power: 27 kVA
Laser operating hours: 1046h
Machine operating hours: 1930h
Machine dimensions: 2.30 x 1.40 x 195 m
Filter unit dimensions: 0.66 x 0.36 x 1.38 m
Laser cooler dimensions: 0.85 x 0.55 x 1.02 m
Weight of machine: 2560 kg
Weight filter unit: 82 kg
Weight laser cooler: 185 kg
Laser cooling with Termochiller P607
Filter unit type MKF LC1(year 2003)
Lasersoft 3D software
laser power: 3,000 W, type of input current: three-phase, sheet thickness aluminum (max.): 20 mm, working range: 3,000 mm, Condition: new, Year of construction: 2023, Operating hours: 24 h, Functionality: fully functional, Equipment: Cooling unit, Working Scope: 3000*1500mm
Fit for: mild steel, stainless steel, brass and aluminum plate laser high precision cutting works
Laser source: Raycus CW fiber laser
Worktable: Exchange worktable, fully enclosed
Max cutting thickness:
Mild steel: 22mm
Stainless steel: 12mm
Good quality cutting thickness
Mild steel: 14~16mm max
Stainless steel: 8mm
Cutting software: Fscut
Laser head: auto focusing laser head Raytools
Servo motor: Fuji
We are offering different working scope laser cutting machines different laser power to choose with.
Welcome to contact us if any questions or cutting tests required
Condition: ready for operation (used), Year of construction: 2012, Operating hours: 18,000 h, Control Unit
X-Axis Movement 3000 mm
Y-Axis Movement 1500 mm
This Baykal BPH 1503 + Hypertherm HPR 130 Plasma Cutting machine Machine was manufactured in the year 2012 and has 18000 production hours. It is equipped with a Baykal control unit.
Condition: good (used), Year of construction: 2021, Die Cutting Machine ML-800 NXL
The machine is brand new.
It is the strongest machine on market, in this size.
Format: 830 x 590 mm
Weight: 2500 kg
Power supply 380 V
Engine: 3 kW
- Electromagnetic clutch and brake
- Quick assembly frame
- 3 modes: continuous, with time delay, manual
- Central lubrication
- additional safety cover
- Tools and instructions with documentation CE.
We provide installation and training.
We provide a warranty of 12 months.
Condition: used, Year of construction: 2005, Cnc plasma cutting machine “Pierce RUR 3000 GP” is in good used condition. The machine has been fully serviced. Replaced new engines, heads, nozzles.
Currently connected to a 6 meter table. It is possible to adjust the working table length of 12 meters. The machine is in good working order, the machine can be tested in Vilnius, Lithuania.
Manufacturer: Pierce Control Automation spol. s.r.o.
Year of manufacture: 2005
Made in: Czech Republic
Key features and configurations:
Cutting width: 2,600 mm.
Total length of rails: 7,700 mm.
Cutting length: 6,100 mm.
Cutting speed range: minimum 0 maximum 12,000 mm/min.
Motor system: X – Y axis. Geared AC motors.
Burners: gas station with LPG burner and one plasma station with burner.
CNC controller: BARNY 10.
Control panel: on a left side.
Plasma source: Jackle 160A (quality cut up to 25 mm).
Modification of tables: suction tables with air extraction system.
Burner height control: PIERCE.
Standard working temperature range 0-50.
95% humidity without condensation.
The extraction system is included.
A closet with all the balloons – there is.
There is no compressor.
If you have more questions, we will be happy to answer them.
Condition: ready for operation (used), Year of construction: 2018, Movement
X-Axis Movement 1500 mm
Y-Axis Movement 3000 mm
Max Material Thickness
Steel 25 mm
Pump drive power 5,5 bar
X-Axis Movement 1500 mm
Y-Axis Movement 3000 mm
Max Material Thickness
Steel 25 mm
Pump drive power 5,5 bar
This ALFATEC CNC 1,5x3M PROFI Plasma Cutting Machine was manufactured in the year 2018. The machine has a Max. cutting speed of 20000mm/min.
Condition: new, Die-cutting machine ML-1200 NXL
Brand new machine.
This is the strongest die cutter in this format.
Format: 1230 × 850 mm
Weight: 5500 kg
380 V power supply
Engine: 5.5 kW
– electromagnetic clutch and brake
– quick assembly frame
– 3 operating modes: continuous, time delayed, manual
– central lubrication
– additional safety covers
– operating tools and instructions with CE documentation.
The machine is available „on the spot”
We provide a 12-month warranty.
Our machines, as few on the market, are adapted to the current regulations in Europe.
Possibility of testing in the showroom in Radom.
Condition: used, Year of construction: 2017, Working hours laser on: 26212 (09/2023) h
Working hours beam on: 18905 (09/2023) h
Laser power: 3000 Watt
Working range laser: 3000 x 1500 x 115 mm
Max. steel: 20 mm
Max. stainless steel: 15 mm
Max. aluminium: 6 mm
Max. copper: 6 mm
Max. brass: 6 mm
Length: 9350 mm
Width: 4600 mm
Height: 2200 mm
Machine weight: 12000 kg
Extended machine accessories
- nozzle changer
- LiftMaster Compact
Condition: excellent (used), Year of construction: 2016, KAYM 92 PLS
Cutting width 920 mm
Feeding depth 1000 mm
Feeding depth 120 mm
Front table length (D) 760 mm
Table Height 900 mm
Min. & max. clamp pressure 150/3.500 daN
Knife speed (by direct command) 45 cykli/ min.
Knife grinding reserve max. 35 mm
Smallest cut without false plate, manual 25 mm
Smallest cut with false plate, automatically 85 mm
Power Supply (220/380) 4 Kw
Backgauge Power Supply 0,75 Kw
BKnife Dimensions (length x width x thickness) 1.095 x 115 x 11,7 mm
Condition: ready for operation (used), Year of construction: 2015, Control Unit
Model iMSNC Windows 7
X-Axis Movement 3000 mm
Y-Axis Movement 2000 mm
This Microstep Easy Cut 3001.20P Plasma Cutting Machine was manufactured in the year 2015 in Slovakia. It is equipped with a iMSNC Windows 7 control unit.
Condition: new, Year of construction: 2024, TWO HEADS CUTTING MACHINE
Double-head oleopneumatic mitre saw with ascending retractable blades, with fixed left and movable right
Cutting unit tilting up to 45° according to vertical axis (left towards right and right towards left)
Possibility of reaching intermediate angles by means of mechanical stop
No. 2 carbide blade Ø 500 mm with hardmetal inserts for aluminium and PVC
No. 2 cutting unit guard pneumatically controlled
Triple pneumatic horizontal/vertical clamps
Venturi effect blades cooling system
Fumes and shavings extraction outlets outside Ø 100 mm
Sliding control panel board
Middling profile support
Air-gun with hose
Condition: good (used), Bookbinding Guillotine Ideal 1046
Cutting line length: 460 mm
Maximum cutting thickness: 0.8 mm
Type of cutter: scissor
Safety Cover: Yes
Format limiter: Yes
Work table dimensions (W x D): 356 x 510 mm
Condition: used, Year of construction: 2006, machine/vehicle number: 37420077, Working hours machine: 31814 h
Laser power: 4000 Watt
Working range laser: 4070 x 2050 x 200 mm
Max. steel: 20 mm
Max. stainless steel: 16 mm
Max. aluminium: 10 mm
Length: 12300 mm
Width: 3350 mm
Height: 2500 mm
Machine weight: 14000 kg
Electrical connected load: 83 kVA
Maintenance information: - TURBO BLOWER changed at 24,000 h (new Turboblower with 6,400 h) - O-rings and tubes changed at 30,000 h (Fanuc) - All maintenance performed by AMADA Control:Type: AMNC-F (Fanuc FS-160iLB)Screen: 15 "touch screenConnections: RJ45 and USB features:- Automatic pallet changer- POWER PIERCING- High pressure cutter CLEANCUT- Aluminum cutter ALUCUT- Automatic gas pressure control- Non-contact capacitive laser cutting head- Diode laser for positioning- Active cutting monitoring- WACS (Water Assisted Cutting System) cutting device- Safety device Peripherals:- Transformer- cooler- Suction
Condition: used, Year of construction: 2006, table length 3000 mm
table width 1500 mm
burner heads 1
workpiece weight 900 kg
max. feed 200 / simultan x+y 300 m/min
accuracy +/- 0,10 mm
sheet thickness for stainless steel 20 mm
Sheet thickness aluminum 12 mm
control Trumpf-Sinumerik 840D
Power connection 105 kVA
Required air-pressure 7-10 bar
rated capacity 33-72 kVA
machine weight ab. 12000 kg
dimensions of the machine ca. 11,2 x 4,6 x 2,4 m
transport dimension 2,98 x 2,4 B X H m
Condition: ready for operation
Video(s) available on our website. 3 x
Electric 400 Volt
Light barrier behind
Light barrier in front
Little-used high-speed laser cutting system (flatbed / CO2) made by TRUMPF,
Laser 5030 Classic with TruFlow 5000 with pallet changer. Design: The
workpiece is stationary, the cutting head moves. X-axis as a gantry drive using
servo motors and Y + Z axes with linear direct drives.
Commissioned in 2007, operating hours approx.: Beam ON: 8200 h, Laser ON:
28,000 h. CNC control based on SINUMERIK 840D with color monitor 12", 64 MB,
USB interface, hard disk space 500MB.
Laser TLF 5000
HI-LAS high pressure cutting
Cutting head quick change device
autom. Sheet metal outer edge detection
APC height control and process control
PCS Process Control System
Position laser diode
progr. Cutting gas selection / pressure setting
progr. Performance cycles
PMS plasma sensors
SprintLas in all sheet thicknesses
Laser power control
Laser logbook function
autom. Pallet changer
autom. Nozzle cleaning
Work area lighting
Small parts/waste conveyor
Compact dust extractor
TFT color screen
ToPs 100 lite
RJ 45 network connection
3.5" floppy drive
Machine was regularly serviced by Trumpf. NEW Power Tube Basic
(Send tube) installed in 04/2023 for 7000 with 12 month warranty!
The license of the TruTops Classic software for programming the machine on the
PC can be purchased at an additional cost.
Machine dealer with own stock of 1600 m².
Condition: ready for operation (used), Year of construction: 2014, Operating hours: 10 h, This ESAB Suprarex SXE-HD 3500 Plasma Cuttting Machine was manufactured in the year 2014 in Germany and has 10 production hours.
Condition: used, Year of construction: 2013, Ref. -No.: 10371
Type: IMPULS 6020
Year of construction: 2013
Type of control: CNC
Storage location: Halberstadt
Country of origin: Belgien
Structural steel: 15 mm
stainless steel: 8 mm
aluminum: 6 mm
Laser source: Co2 - 4KW
Edit size: 6000 x 2000 mm
changing table: Yes
tension: 50 Hz - 400 Volt
Serial no.:: 348XX
Operating hours: 31280 H
Electrical connection: IEC
X-Axis: 6200 mm
Y-Axis: 2100 mm
Max capacity: 4 kN
Max. weight: 25055 KG Dan
Performance: 75 kW
Machine type: 62-21
cutting head: LM2000 NC Focus
Process control: LM2500
Capacitive sensor: LM2301 EG8030
Last maintenance incl. new PC in 04/2023
Condition: good (used), Heidelberg Cylinder SBG 56×77 automatic die-cutting machine
The most wanted machine on the market, end of production.
In gray color.
The machine has been completely renovated to the „gold” standard, which means the highest standard of service.
The machine is professionally prepared for die-cutting.
Fully automatic, smooth speed regulation, central lubrication, safety covers.
The set includes two frames, spare elements, a sheet for the cylinder, trolleys, a large set of fillers and locks
Condition: new, Year of construction: 2023, - Cutting area effective 1050 x 2050 mm
- Cutting head 2D
- CNC control NUM up to 15 m/min
- Z-axis CNC clear height 100mm
- Position laser
- Control housing control panel V2 incl. control cabinet in basin
- Computer with 20" LED monitor and splash-proof keyboard and mouse
- Waterjet software SmartCut
- Waterjet cutting valve
- Abrasive cutting head
- Abrasive dosing unit CNC with intermediate tank
- Abrasiv storage tank 450 kg
- Abrasiv Minihopper system pressure tank
- Cover hood with viewing window and safety function
Subject to changes and errors in technical data and prices.
Subject to prior sale
Our general terms and conditions apply and can be viewed on our website.
Condition: ready for operation (used), Year of construction: 2009, standard equipment
- closed machine frame with integrated laser unit
- movement unit for highly accurate processing
- Toryue-drive in combination with linear direct drive
- closed beam line
- a cutting head strategy
- cooling unit
- automatic pallet-changer in the longitudinal direction
- Work space lighting
- position laser diode
- spray device
- Maintenance-free turbo radial fan
- high frequency excitation
- TASC laser control
- Laser power control
- Logbook function laser
- LensLine with status check
- Lens cutting head with 250mm focal length
- Universal quickchange device for cutting head (UTI)
- ControlLine: automatic height control and sheet edge detection
- simple workshop programming
- Fast post-production
- integrated technology files
- production plan
- Teleservice via the Internet
- RJ-45 network
- light barriers
- more chambers extraction plant
- compact dust
- machine-cladding with Makrolon panes
+ TruFlow 5000 with optimized standby incl. jet pipe ventilation with N2
+ Automatic lens and nozzle technology package (includes nozzle changer, jet alignment and LensLine with automatic status monitoring)
+ Wide cross conveyor belt with tipping container (to the left of the machine)
+ cleaning brush
+ Right position
+ Bearing interface
+ Basic unit including peeling device and sheet thickness gauge
+ Rake attachment extension ®, interchangeable tines
+ Third position
+ Base for LiftMaster
Condition: new, Year of construction: 2023, Laser source: 3kW Raycus
Laser head: Raytools autofocus
Control system: FSCUT 5000 A
Loading of tubes up to 6400 mm long, unloading up to 4000 mm
Positioning accuracy: ±0.05/1000 mm
Acceleration: 1 m/s²
Speed: 120 rpm
Max. Positioning speed: 100 m/min
Max. Max. weight of a pipe: 250 kg
Pipe diameter: 15-230 mm
Total machine size: 12728 × 3400 × 2450 mm
Condition: ready for operation (used), Year of construction: 2008, Control Unit
Model Vision 52
Outer length 500 mm
Height adjustment 700 mm
This ESAB SXE-P14500 SUPRAREX Plasma Cutting Machine was made in 2008. It is equipped with an ESAB Vision 52 control unit.
Condition: used, Year of construction: 2011, Ref. -No.: 10368
Type: BYSPEED 3015
Year of construction: 2011
Type of control: CNC
Control: Bystronic ByVision
Storage location: Halberstadt - Germany
Country of origin: Schweiz
Laser medium: CO² Kohlenstoffdioxid
wavelength: 10600 Nm
Maximum power: 6000 Cw
Workspace X: 3048 mm
Work area Y: 1524 mm
Stroke Z axis: 100 mm
Positional deviation Pa*: +/- 0.1 mm/m
Position spread Ps*: +/- 0,05 mm
Positioning in axis-parallel X and Y maximum: 120 m / min
Positioning simultaneously X/Y maximum: 169 m / min
Axis acceleration X/Y maximum: 30 m/s^2
table load capacity: 890 kg
table change time: 25 s
Condition: good (used), Ideal 3905 guillotine
This is a guillotine model from the well-known German manufacturer IDEAL
The device is like new.
– solid metal construction,
– manual drive of the knife beam,
-lever paper pressure,
-transparent safety cover on the cutting field,
-SCS system (Saefty Cutting System),
– manual saddle feed,
-reading the cutting position on the strip,
-hardened knife made of high-quality SOLINGEN steel
Cutting length 390 mm
Input height 40 mm
minimum remnant: 34mm
Weight 54 kg
The set includes a new foot column, a spare knife and a knife replacement element.