Used Brother Hs 3100 for sale (55)

Condition: excellent (used), Year of construction: 2013, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 20 m/min, controller manufacturer: Brother, controller model: CNC-B00, table width: 400 mm, table length: 800 mm, table load: 250 kg, spindle speed (max.): 16,000 rpm, - Number of axes : 4 MILLING SPINDLE - Tool holder type : BT30 - Spindle power : 7,4 / 4,9 [kW] - Spindle speeds : 16.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 700 x 400 x 300 [mm] - Rapid traverses rates (X/Y/Z) : 50 / 50 / 50 [m/min] - Cutting feed rates (X/Y/Z) : 10 / 10 / 20 [m/min] - Distance table / spindle nose (min./max.) : 180 - 480 [mm] TOOL CHANGER - Auto. Tool Changer type : Umbrella - Tool magazine capacity : 21 - Tool exchange time : 1,4 [sec] TABLE - Table dimensions : 800 x 400 [mm] - Maximum weight upon table : 250 [kg] POWER SUPPLY - Supply voltage : 220 [V] Hnjdeulwztspfx Adweg - Total installed power : 9,5 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.050 x 2.207 [mm] - Machine height : 2.592 [mm] - Machine weight : 2.400 [kg] EQUIPMENT - CNC : Brother CNC-B00 - Interface : Ethernet / USB - 3 colors status lamp - Prepared for robot loading : right handside - Type of divisor : full 4th axis * Manufacturer : LEHMANN EA-510 * Travel 4th axis : 360 [°] * Indexing precision 4th axis : 0,001 [°] * center height : 150 [mm] - COOLANT TANK - Coolant through spindle * with high-pressure pump : 15 [bars] - Chips conveyor : Rear HAKUSAN - Oil mist extractor : SARA UC1SD - Electric transformer : 400 / 220 [V]

Year of construction: 1996, condition: used, Control unbekannt weight 1,8 t Hnjdpjyacptofx Adwsg capacity 7,0 kVA

Condition: ready for operation (used), Year of construction: 2008, controller manufacturer: BROTHER, controller model: B00, table width: 400 mm, table length: 600 mm, This BROTHER TC-32BN FT Vertical Machining center was made in 2008 in Japan. It is equipped with a Brother B00 control unit. Machine Benefits Hjdpox Uzwaefx Adwong Technical Machine Benefits • Microloc clamping system • Microloc bed • 26 tool atc • Air bench • Omf 1000 oil mist filter unit • Lns coolant swarf conveyor system

Condition: good (used), Year of construction: 2016, Ref. -No.: 10411 Manufacturer: BROTHER Type: Speedio S700X1 Year of construction: 2016 Type of control: CNC Control: BROTHER CNC Storage location: Halberstadt Country of origin: Germany X-Travel: 700 mm Y-Travel: 400 mm Z-Travel: 300 mm Main spindle drive power: 15,4 kW Hodpfxjx Sw Ehe Adweng Main spindle speed range: 16 - 16.000 RPM Table surface: 800 x 400 mm Distance Spindle /Table: 180 - 480 mm Table Load: 300 kg Max. Tool Weight: 25 kg Max. Tool Length: 250 mm Max. Tool Diameter: 110 mm Tool change time: 0,8 s Tool Taper: BT 30 Tool Piece Magazine With: 21 Pcs./pcs. Feed Speeds X/Y/Z Axis: 10.000 - 20.000 mm / min Rapid Traverse X-Axis: 50 m / min Rapid Travel Y-Axis: 50 m / min Rapid Traverse Z-Axis: 56 m / min X - axis acceleration: 2,0 G Y - Axis acceleration: 1,3 G Z - axis acceleration: 2,2 G Acceleration time: 0,30 sec Machine length: 2360 mm Machine width: 2120 mm Machine Height: 2500 mm Weight Of The Machine Ca.: 2,4 t Further information: THREAD Speed: 6,000 rpm Acceleration time: 0.11 s CUTTING CAPACITY Drilling capacity in aluminum: max. 24 mm / F0.2 Drilling capacity in C45 steel: max. 18 mm / F0.1 Tapping capacity in aluminum: max. M22 Tapping capacity in C45 steel: max. M14 Milling capacity in aluminum: max. 660 cm³/min. Face milling cutter: Ø 100 / depth 2.2 mm / F=3000 Milling capacity in steel C45: max. 48 cm³/min. Face milling cutter: Ø 40 / depth 2.5 mm / F=484 HIGH-SPEED TOOL CHANGER Stations with directional logic: 21 Change time T - T: 0.8 seconds Changeover time C - C at n=10,000 rpm and XYZ positioning: 1.4 seconds Positioning accuracy: ± 0.006 mm Repeat accuracy: ± 0.004 mm Accuracy of thread depth: 0.05 mm Air consumption: 45 l/min Air pressure: 0.5-0.6 MPa Air quality: 99% anhydrous Including FANUC robot / automation Machine can be inspected under power.

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 111855/111856/111640, overall weight: 2,250 kg, Offer package: Brother Machining Centers Two fully operational machines and one defective machine included as a free addition with complete package purchase. From first owner and for own use. Machines under power and ready for demonstration. Machine No. 1 Brother TC-22A – Year of manufacture: 03/2001 – Serial number: 111855 Equipment: - Travel distances: 500 x 400 x 410 mm - HSK-A40 tool spindle - Spindle speed: 12–12,000 rpm - Coolant filtration system: 20 µm - Through-spindle coolant: 70 bar - Interface for Kitagawa rotary table connection - Machine weight: 2250 kg Machine No. 2 Brother TC-22A – Year of manufacture: 03/2001 – Serial number: 111856 Equipment: - Travel distances: 500 x 400 x 410 mm - HSK-A40 tool spindle - Spindle speed: 12–12,000 rpm - Coolant filtration system: 20 µm - Through-spindle coolant: 70 bar - Interface for Kitagawa rotary table connection - Machine weight: 2250 kg Machine No. 3 Hodpfxexp N Dbo Adweng Brother TC-22A – Year of manufacture: 03/2000 – Serial number: 111640 – defective Included free of charge with purchase of the full package Spindle drive PE9A300UXXXC03H defective Axis drives 2x PE9A50UXXXC01 defective Y-axis motor P10B10120JXSB1 defective Equipment: - Travel distances: 500 x 400 x 410 mm - HSK-A40 tool spindle - Spindle speed: 12–12,000 rpm - Coolant filtration system: 20 µm - Through-spindle coolant: 70 bar - Interface for Kitagawa rotary table connection - Machine weight: 2250 kg Accessories included: Through-spindle coolant pump IKZ 70 bar PKCE570-12 UA3 - Pump pressure: 210 bar - Capacity: 20 l/min - New and unused Total price for all three items. Ex works, Luckenwalde (Germany), not loaded and without transport. Individual sale of the machines may be possible.

Condition: used, Year of construction: 2021, operating hours: 4,360 h, functionality: fully functional, machine/vehicle number: JPN120193, travel distance X-axis: 650 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 435 mm, rapid traverse X-axis: 50 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Brother CNC C00, spindle speed (max.): 16,000 rpm, number of spindles: 1, Equipment: chip conveyor, Brother Speedio R650X2 – High-Speed CNC Drilling & Tapping Center, 40-Station ATC, Through-Spindle, RTT – 3 Machines Available Highly efficient 3-axis CNC machine in a compact design, ideal for series production in the automotive, aerospace, and medical technology industries. Outstanding balance of performance, quality, and space requirements. Technical Data: Model: Brother Speedio R650X2 Control: Brother CNC-C00 Travel: X 650 mm · Y 425 mm · Z 435 mm (typical: ~650×425×435 mm) Spindle: BT-30, up to 16,000 rpm, 17 kW Tool Magazine: 40-station, ultra-fast tool change Cooling: Through-spindle, 70 bar, including emulsion mist extractor Chip Conveyor: Twin-system with filtration Special Features: - CNC Rotary Table (EA510) - Hydraulic Clamping System (80–210 bar) Hjdjx S Nlaepfx Adwjng - Robot Interface - Tool Breakage Monitoring & Workpiece Presence Detection - Tool Presetter, Spindle Probe - Manual Pulse Generator, Lighting Package, etc. Condition & Functionality: Fully operational and thoroughly refurbished. Test protocol and control data backup available. The machine is set up and ready for demonstration at our facility. Location: 92353 Postbauer-Heng, Bavaria Scope of Delivery: All technical documentation, maintenance records, and spindle probe. All machines are in excellent condition, regularly maintained, and available immediately. Machine 1 Model: Brother Speedio R650X2 Year of manufacture: 2020 Serial number: JPN116055 Machine hours: approx. 9,600 Power-on hours: approx. 20,708 Machine 2 Model: Brother Speedio R650X2 Year of manufacture: 2021 Serial number: JPN119597 Machine hours: approx. 7,800 Power-on hours: approx. 20,000 Machine 3 Model: Brother Speedio R650X2 Year of manufacture: 2021 Serial number: JPN120193 Machine hours: approx. 4,500 Power-on hours: approx. 16,500

Condition: good (used), Brother Exedra E-100 Mark II sewing machine, Foot Lifter FB II, MD-816B; Hnedpfou Nyulsx Adwog You are purchasing an industrial sewing machine from Brother. Brother Exedra E-100 Mark II sewing machine, Foot Lifter FB II, MD-816B, DB2-B737-413 380V Find more items in our shop!

Condition: good (used), functionality: fully functional, Brother S-7300A-403P Full Sewing machine station. Single Needle Direct Drive Lock Stitcher with Electronic Hodpfsv U Ehqex Adwong Feeding System and Thread Trimmer. With Work Table and Spindles. World’s first Electronic Feed Control DigiFlex Feed digitalizes the feeding system and resolves various sewing troubles without adjustment work. Improvement in the reduction of needle breakage and productivity. Simple select and smooth sewing without material slippage. Excellent sewing quality that's easy to get proper thread tension in accordance with several materials. The Electronic Feed Control is directly connected to the stepping motor The horizontal feeding system is one of the first systems computerized for a single lock stitch sewing machine. The feed motion can be changed with one touch of a button to provide the best sewing quality for various materials. The sewing stitch length can also be digitalized, stabling the stitches. Compared to conventional mechanical control, the stepping motor control makes the response of reverse sewing quicker and reduces needle breakage. LED Light Equipped as Standard Both sides of the LED handy light are equipped for better operation, preventing shadows on the garment. The brightness can be adjusted on the panel. Good working condition. Please check out our other listings as well.

Condition: good (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 480 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 270 mm, table width: 300 mm, table length: 600 mm, table load: 300 kg, rotational speed (min.): 10 rpm, rotational speed (max.): 6,000 rpm, overall weight: 2,000 kg, spindle speed (max.): 6,000 rpm, operating hours of spindle: 1,381 h, spindle motor power: 7 W, input voltage: 440 V, type of input current: three-phase, Equipment: documentation/manual, x-travel 480 mm y-travel 360 mm z-travel 270 mm Control system: Brother Spindle speed range: 6 - 6,000 rpm Main spindle drive power: 5 / 7 kW Tool holder: SK 30 Table clamping surface: 600 x 300 mm Rapid traverse (x / y / z): 36 / 36 / 30 m/min Number of tool stations: 14 positions The machine is fully functional. Accessories, tools, and clamping devices shown are only included in the scope of delivery if specified in the additional information. Technical data and specifications are subject to change and are provided without guarantee. Intermediate sale reserved! Hsdpfx Ajxrpahodwong The machine is sold without any warranty.

Condition: ready for operation (used), Brother B521127-5 Board from Brother TC-321 , serial no. according to photo, used, good condition, 100% functional Hsdpfxsi D Ulce Adwong

Condition: ready for operation (used), Year of construction: 2008, Main Drive Spindle speed range 20000 Tool taper HSK A-40 Number of axis 4 Movement X-Axis Movement 550 mm X-Axis Rapid Traverse 70 m/min Hnsdex D Rdrepfx Adwog Y-Axis Movement 400 mm Y-Axis Rapid Traverse 70 m/min Z-Axis Movement 415 mm Z-Axis Rapid Traverse 70 m/min This 4-axis Brother TC-32BN QT was manufactured in 2008, featuring a Brother B00 control system, X-axis travel of 550 mm, Y-axis travel of 400 mm, and Z-axis travel of 415 mm. It boasts rapid traverse rates of 70 m/min, a spindle speed up to 20,000 rpm, and a tool magazine with 40 positions. Consider the opportunity to buy this Brother TC-32BN QT vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: refurbished (used), Year of construction: 2021, Brother GTX PRO DTG Printer Year 2021 Very good condition used machine, checked by professional Print: Approximately 100 000 Support table included Printer overhauled, cleaned and tested Included : Ink around 40% (2+) Cleaning liquid full. Included with the used Brother GTX PRO Bulk : Hedpfx Aek Rkpnodwjng 5L Premium Dark Cotton Pre-Treatment, SK Color Dark Cotton; 1L of Premium Light Cotton Pre-Treatment, LIGHT Cotton by SK Color; 1L cleaning fluid for Brother GTX and GTX Pro CXS from SK Color; 100 DTF A3 sheets; 1 Kg of Premium DTF powder. Shipping not included We have various GTX Pro Bulk to sell and prices varies depending on print counts : Less than 40K prints : 13500€ between 40K et 60K prints : 12000€ between 60K et 80K prints : 11000€ between 80K et 100K prints : 10250€ More than 100K prints : 9500€

Condition: excellent (used), Year of construction: 2012, 4-Head Embroidery Machine with 12 Needles per Head Sewing speed: 1000 stitches per minute (spm) Distance between heads: 360 mm Embroidery area: 450 × 360 mm Stitch length: 0.1 ~ 12.7 mm (minimum increment 0.1 mm) Automatic thread trimming and thread break detection Power supply: 220 V; 1.1 kVA Machine dimensions: 2320 × 1360 × 1750 mm Hsdsx Swxzopfx Adwjng Weight: 600 kg OPERATION MANUAL AVAILABLE

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 112447, travel distance X-axis: 520 mm, travel distance Y-axis: 440 mm, travel distance Z-axis: 360 mm, nominal power (apparent): 9 kVA, table width: 300 mm, table height: 50 mm, table length: 600 mm, rotational speed (max.): 10,000 rpm, overall weight: 1,800 kg, spindle speed (max.): 10,000 rpm, spindle nose: bt30, number of slots in tool magazine: 14, input voltage: 380 V, type of input current: three-phase, Due to duplicate equipment: Brother TC 229, conversational description, 14 tools in BT 30, 10,000 rpm. One tool-change fork is broken but still picks up tools. Currently in operation until sold. Very easy to operate, ideal for single parts or production runs, lightning-fast part setup. Engraving, tapping, milling, etc. Sold with chip tray and water pump. Ready to use but without tools, vises, or rotary table. Clean machine that works reliably every day. Loading on site possible. Hnsdpfx Adex N Ncyewsg

Condition: like new (used), Year of construction: 2023, The machine is almost new, it has only 600 prints on the clock. It was turned off for more than a year and now it has both print heads clogged, so they must be replaced (around 3400€), maybe you can recover the color one. The set of inks must be renewed too. So for around 9.000€ you would have a brand new printer, factory new is 16.000€. Hjdpex Sax Rsfx Adwjng

Condition: ready for operation (used), Brother B521127-3 Board from Brother TC-321 , used, good condition, 100% functional Hjdpfji D Uk Uex Adwjng

Condition: ready for operation (used), Year of construction: 2013, operating hours: 29,522 h, Main Drive Hnodpfox D Dqrox Adwsg Tool taper HSK 40 This Brother TC32B was manufactured in 2013. It features vacuum clamping technology, adaptable to hydraulic settings, and a robot interface. The machine includes a 26-slot magazine, a table width of 560 mm, and uses HSK40 tooling. Optional minimum quantity lubrication system available. Consider the opportunity to buy this Brother TC32B vertical machining centre. Contact us for more information. Application Types Milling

Year of construction: 2021, condition: excellent (used), functionality: fully functional, The induction sealer is used for sealing PET and PP bottles with an aluminum protective lid. It is particularly recommended for the chemical, pharmaceutical, and cosmetics industries, as well as wherever it is necessary to secure volatile or corrosive substances from uncontrolled leakage. Main features: • Suitable for use with plastic or glass containers. • Very easy to operate • Handheld device for small production runs Hsdpfexlm Shox Adwsng • Portable and does not require a dedicated workspace • Packaging speed: approx. 20-40 pcs/min (depending on the operator and product being sealed) • Maximum container diameter: 60-130 mm • Maximum distance between the inductor and container: 3 mm • Activated by a switch located on top of the inductor Control panel: • On/Off switch • Fuse • Digital display indicating current • Digital display indicating time • Overheat protection – the device automatically shuts down until it cools down

Condition: good (used), Year of construction: 2008, Machine type: Machining centers (vertical) Manufacturer: Brother Hsdpfx Adett Apwjwjng Model: TC-S2A Serial No. Control system: Brother A00 Year of Manufacture: 2008 There are 21 pcs. machines of Brother TC-32A in stock Spindle speed 10,000 rpm Spindle motor power 6.7 kW Number of axis 3 Traverse path X-Axis travel 480 mm Y-Axis travel 360 mm Z-Axis travel 270 mm Table Surface 600×400 mm Max.Load 150 kg Spindle Holder BT30 Tool Magzine 14 Machine Dimension 1.800×1.600×2.360 mm Machine Weight 1.800

Condition: ready for operation (used), A machining center with 10-station tool changer is offered. Table clamping surface X/Y: 600mm/300mm, travel X/Y/Z: approx. 420mm/300mm/250mm, spindle speed: 6000rpm. Tool holder: BT30. Control: Brother CNC-400, machine weight: approx. 2000kg, including manual. Inspection possible by appointment. Hnsdpfex Ecu Esx Adwog

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 415 mm, Optional Equipment Complete machine with rotary table, coolant tray, and chip conveyor, ready for operation. Enclosed cab roof Optional Equipment Complete machine with rotary table and coolant tray, ready for operation. Additional clamping control module with push buttons to the right of the door. Enclosed cab roof with extraction nozzle. Extraction not included. This Brother TC32b vertical machining center was manufactured in 2005. BROTHER TC-32 b DOUBLE PALLET VERTICAL MACHINING CENTER BROTHER BRAND, MADE IN JAPAN MODEL TC-32 B YEAR 2005 BROTHER CONTROL TABLE SIZE 600.0 mm x 425.0 mm X-AXIS: 550.0 mm Y-AXIS: 400.0 mm Z-AXIS: 415.0 mm SPINDLE SPEED 12 - 12,000 RPM Hnsdpfx Aowg Trmedweg SPINDLE TAPER BT 30 SPINDLE MOTOR 11/6 kW ATC 26 STATIONS

Condition: ready for operation (used), Brother B521104-2 Board from Brother TC-321 , used, good condition, 100% functional Hnedoi D Uk Hjpfx Adwog

Condition: ready for operation (used), Year of construction: 2007, Main Drive Spindle speed range 22000 Tool taper BT30 Hedpfx Ajx D Nk Dedwong Movement X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 200 mm This Brother TC 31AN was manufactured in 2007. It features a robust Fanuc machining center control, a high-speed spindle up to 22,000 rpm, and a BT30 spindle taper. The work table measures 500 x 270 mm, complemented by a 26-slot tool magazine. Specialized with a rotary changer table for efficient fixture loading. Contact us for further details regarding this machine. Application Types Milling

Condition: ready for operation (used), Brother B521169-3 Circuit Board from Brother TC-321, serial no. according to photo, used, good condition, 100% functional Hnjdpfxei D Ulkj Adwog

Condition: ready for operation (used), Year of construction: 2014, operating hours: 6,500 h, General Data Measurements width 1800 mm Measurements depth 2200 mm Measurements height 2200 mm Machine weight 5000 kg Control Unit Brand BROTHER Main Drive Spindle speed range 10000 Number of axis 4 Movement X-Axis Movement 700 mm Y-Axis Movement 400 mm Hsdpfx Adjx D Nzijwjng Z-Axis Movement 350 mm Table Table load 250 kg This 4-axis Brother Speedio S700X1 was manufactured in 2014. It features a robust table size of 700 x 400 mm and a maximum table load of 250 kg. Equipped with a high-speed spindle up to 10,000 rpm and a 15 kW motor, it supports a tool magazine with 24 tools. Ideal for precise and efficient machining. Contact us for more information about this machine. Application Types Milling