Used Brother for sale (56)

Condition: good (used), High-speed machining centre Brother TC-S2A Year of manufacture: 1999 Serial No.: 111177 Spindle hours: 9,705 h Power-on hours: 36,375 h Table: 850 x 450 mm Travel X / Y / Z: 500 / 450 / 410 mm Table load capacity: 300 kg Spindle taper: BT30 Spindle speeds: 12 – 10,000 rpm Tool changer: 14 stations Feedrate X/Y: 1 – 10,000 mm/min Feedrate Z: 1 – 20,000 mm/min Rapid traverse X/Y: 36 m/min Rapid traverse Z: 50 m/min The zero-point clamping system is not included in the sale Kdodpsxv R I Uefx Aadow The machine is fully operational and ready for immediate use.

Condition: good (used), Year of construction: 2016, Ref. -No.: 10411 Manufacturer: BROTHER Type: Speedio S700X1 Year of construction: 2016 Type of control: CNC Control: BROTHER CNC Storage location: Halberstadt Country of origin: Germany X-Travel: 700 mm Y-Travel: 400 mm Z-Travel: 300 mm Main spindle drive power: 15,4 kW Main spindle speed range: 16 - 16.000 RPM Table surface: 800 x 400 mm Distance Spindle /Table: 180 - 480 mm Table Load: 300 kg Max. Tool Weight: 25 kg Max. Tool Length: 250 mm Max. Tool Diameter: 110 mm Tool change time: 0,8 s Tool Taper: BT 30 Tool Piece Magazine With: 21 Pcs./pcs. Feed Speeds X/Y/Z Axis: 10.000 - 20.000 mm / min Rapid Traverse X-Axis: 50 m / min Rapid Travel Y-Axis: 50 m / min Rapid Traverse Z-Axis: 56 m / min X - axis acceleration: 2,0 G Y - Axis acceleration: 1,3 G Z - axis acceleration: 2,2 G Acceleration time: 0,30 sec Machine length: 2360 mm Machine width: 2120 mm Machine Height: 2500 mm Weight Of The Machine Ca.: 2,4 t Further information: THREAD Speed: 6,000 rpm Acceleration time: 0.11 s CUTTING CAPACITY Drilling capacity in aluminum: max. 24 mm / F0.2 Drilling capacity in C45 steel: max. 18 mm / F0.1 Tapping capacity in aluminum: max. M22 Tapping capacity in C45 steel: max. M14 Milling capacity in aluminum: max. 660 cm³/min. Face milling cutter: Ø 100 / depth 2.2 mm / F=3000 Milling capacity in steel C45: max. 48 cm³/min. Face milling cutter: Ø 40 / depth 2.5 mm / F=484 HIGH-SPEED TOOL CHANGER Stations with directional logic: 21 Kodpfx Aexvw Hdeadsdw Change time T - T: 0.8 seconds Changeover time C - C at n=10,000 rpm and XYZ positioning: 1.4 seconds Positioning accuracy: ± 0.006 mm Repeat accuracy: ± 0.004 mm Accuracy of thread depth: 0.05 mm Air consumption: 45 l/min Air pressure: 0.5-0.6 MPa Air quality: 99% anhydrous Including FANUC robot / automation Machine can be inspected under power.

Condition: excellent (used), Year of construction: 2013, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 20 m/min, controller manufacturer: Brother, controller model: CNC-B00, table width: 400 mm, table length: 800 mm, table load: 250 kg, spindle speed (max.): 16,000 rpm, - Number of axes : 4 MILLING SPINDLE - Tool holder type : BT30 - Spindle power : 7,4 / 4,9 [kW] - Spindle speeds : 16.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 700 x 400 x 300 [mm] - Rapid traverses rates (X/Y/Z) : 50 / 50 / 50 [m/min] - Cutting feed rates (X/Y/Z) : 10 / 10 / 20 [m/min] - Distance table / spindle nose (min./max.) : 180 - 480 [mm] TOOL CHANGER - Auto. Tool Changer type : Umbrella - Tool magazine capacity : 21 - Tool exchange time : 1,4 [sec] TABLE - Table dimensions : 800 x 400 [mm] - Maximum weight upon table : 250 [kg] POWER SUPPLY - Supply voltage : 220 [V] - Total installed power : 9,5 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.050 x 2.207 [mm] - Machine height : 2.592 [mm] - Machine weight : 2.400 [kg] EQUIPMENT - CNC : Brother CNC-B00 - Interface : Ethernet / USB - 3 colors status lamp - Prepared for robot loading : right handside Kdjdeulwztepfx Aadjw - Type of divisor : full 4th axis * Manufacturer : LEHMANN EA-510 * Travel 4th axis : 360 [°] * Indexing precision 4th axis : 0,001 [°] * center height : 150 [mm] - COOLANT TANK - Coolant through spindle * with high-pressure pump : 15 [bars] - Chips conveyor : Rear HAKUSAN - Oil mist extractor : SARA UC1SD - Electric transformer : 400 / 220 [V]

Condition: ready for operation (used), Year of construction: 2007, Main Drive Spindle speed range 22000 Tool taper BT30 Movement X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 200 mm This Brother TC 31AN was manufactured in 2007. It features a robust Fanuc machining center control, a high-speed spindle up to 22,000 rpm, and a BT30 spindle taper. The work table measures 500 x 270 mm, complemented by a 26-slot tool magazine. Specialized with a rotary changer table for efficient fixture loading. Contact us for further details regarding this machine. Application Types Kdjdexr R Aqepfx Aadjw Milling

Condition: used, BROTHER TC-32 B QT TWIN PALLET VERTICAL MACHINING CENTRE MAKE BROTHER, MADE IN JAPAN MODEL TC-32 B QT YEAR 2007 CONTROL BROTHER CNC-B00 TABLE SIZE 600.0 mm x 425.0 mm TRAVERSES (XYZ) X AXIS: 550.0 mm Y AXIS: 400.0 mm Z AXIS: 415.0 mm SPINDLE SPEED Up to 16,000 RPM SPINDLE TAPER HSK 40 SPINDLE MOTOR 11/6 kW ATC 26 STATIONS PLUS 2 x LEHMANN ROTARY TABLE 70 BAR HIGH PRESSURE COOLANT 2 x PROBING TWIN PALLET SWARF CONVEYOR Kjdpew Edh Njfx Aadedw SET OF MANUALS

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, number of ink cartridges: 5, color channels: 5, number of print heads: 4, resolution (max.): 1,440 dpi, year of last overhaul: 2025, type of input current: DC, input voltage: 230 V, Brother GTX 600 garment printer in perfect condition. Print heads 100% tested. The printer allows DTF printing as well, using the same inks. Included is an extra DTF tray measuring 60x60 cm. Kdedpfx Aoxrbzqsadjw The printer is in continuous use. The set comes with a priming machine. Optionally available together with a DUO PRESS automatic 2-station heat transfer press with compressor for 3,500 euros.

Condition: good (used), High-Speed Machining Center Brother TC-S2A Year of manufacture: 1999 Serial No.: 111177 Spindle hours: 9,201 h Power-on hours: 26,077 h Table: 850 x 450 mm Travel range X / Y / Z: 500 / 450 / 410 mm Table load: 300 kg Spindle taper: BT30 Spindle speed: 12 – 10,000 rpm Tool changer: 14 positions Feed rate X/Y: 1 – 10,000 mm/min Feed rate Z: 1 – 20,000 mm/min Rapid traverse X/Y: 36 m/min Rapid traverse Z: 50 m/min Kjdpfxoxv R H De Aadedw The zero-point clamping system is not included in the sale. The machine is in fully functional and immediately operational condition.

Condition: ready for operation (used), Brother B521104-2 Board from Brother TC-321 , used, good condition, 100% functional Kdjdpfx Aasi D Uk Hedow

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 121162, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 415 mm, table load: 200 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel paths X-axis: 550 mm Y-axis: 400 mm Kdodpfjxnwvpjx Aadow Z-axis: 415 mm Work table Work table size: 550 x 400 mm Table load capacity: 200 kg Spindle Max. spindle speed: 12,000 rpm MACHINE DETAILS Number of axes: 5 Weight: 4,600 kg Electrical data Power supply: 220 V, 3 phase Frequency: 50/60 Hz Rated power: 16.0 kVA Max. power: 32.0 kVA EQUIPMENT 2 pallets

Condition: ready for operation (used), Year of construction: 2008, Main Drive Spindle speed range 20000 Tool taper HSK A-40 Number of axis 4 Movement X-Axis Movement 550 mm X-Axis Rapid Traverse 70 m/min Y-Axis Movement 400 mm Y-Axis Rapid Traverse 70 m/min Z-Axis Movement 415 mm Z-Axis Rapid Traverse 70 m/min Kodpfx Aaexn Uz Aedjdw This 4-axis Brother TC-32BN QT was manufactured in 2008, featuring a Brother B00 control system, X-axis travel of 550 mm, Y-axis travel of 400 mm, and Z-axis travel of 415 mm. It boasts rapid traverse rates of 70 m/min, a spindle speed up to 20,000 rpm, and a tool magazine with 40 positions. Consider the opportunity to buy this Brother TC-32BN QT vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2000, Brother TC-22A machining center (5-axis) TECHNICAL DATA Number of axes: 5 X-axis: 500 mm Y-axis: 410 mm Z-axis: 610 mm Spindle speed: 12`000 rpm Kdsdeq E N Umspfx Aadsw Spindle nose: BT30 Tool changer, number: 26 Tool change time: 0.7 sec Table size: 650 x 400 mm Maximum load: 200 kg Dimensions and weight: Dimensions: 1671 x 2846 x 2274 mm Weight: 2250 kg

Condition: good (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 480 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 270 mm, table width: 300 mm, table length: 600 mm, table load: 300 kg, rotational speed (min.): 10 rpm, rotational speed (max.): 6,000 rpm, overall weight: 2,000 kg, spindle speed (max.): 6,000 rpm, operating hours of spindle: 1,381 h, spindle motor power: 7 W, input voltage: 440 V, type of input current: three-phase, Equipment: documentation/manual, x-travel 480 mm y-travel 360 mm z-travel 270 mm Control system: Brother Spindle speed range: 6 - 6,000 rpm Main spindle drive power: 5 / 7 kW Tool holder: SK 30 Table clamping surface: 600 x 300 mm Kdsdexrpahspfx Aadjw Rapid traverse (x / y / z): 36 / 36 / 30 m/min Number of tool stations: 14 positions The machine is fully functional. Accessories, tools, and clamping devices shown are only included in the scope of delivery if specified in the additional information. Technical data and specifications are subject to change and are provided without guarantee. Intermediate sale reserved! The machine is sold without any warranty.

Condition: good (used), High-Speed Machining Center Brother TC-S2A Year of manufacture: 1999 Serial number: 111177 Spindle hours: 15,923 h Power-on hours: 44,781 h Table: 850 x 450 mm Travel (X / Y / Z): 500 / 450 / 410 mm Table load capacity: 300 kg Spindle taper: BT30 Spindle speeds: 12 – 10,000 rpm Tool changer: 14 positions Kdedpfxsxv R Hkj Aadsw Feed rate X/Y: 1 – 10,000 mm/min Feed rate Z: 1 – 20,000 mm/min Rapid traverse X/Y: 36 m/min Rapid traverse Z: 50 m/min The zero-point clamping system is not included in the sale. The machine is in fully functional and immediately operational condition.

Condition: ready for operation (used), Brother B521169-3 Circuit Board from Brother TC-321, serial no. according to photo, used, good condition, 100% functional Kdedpfx Asi D Ulkoadsw

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 111855/111856/111640, overall weight: 2,250 kg, Offer Package: Brother Machining Centers Two fully operational machines and one defective machine included free when purchasing the complete package. Single owner from original use. Machines powered and ready for demonstration. Machine No.1 Brother TC-22A – Year of manufacture: 03/2001 – Serial No.: 111855 Equipment: - Travel paths: 500 x 400 x 410 mm - HSK-A40 tool spindle - Spindle speed: 12–12,000 rpm - Coolant filtration unit 20 μm - Through-spindle coolant 70 bar - Interface for connecting Kitagawa rotary table - Machine weight: 2,250 kg Machine No.2 Brother TC-22A – Year of manufacture: 03/2001 – Serial No.: 111856 Equipment: - Travel paths: 500 x 400 x 410 mm Kdedpfxoxp N Dbo Aadow - HSK-A40 tool spindle - Spindle speed: 12–12,000 rpm - Coolant filtration unit 20 μm - Through-spindle coolant 70 bar - Interface for connecting Kitagawa rotary table - Machine weight: 2,250 kg Machine No.3 Brother TC-22A – Year of manufacture: 03/2000 – Serial No.: 111640 – defective Included as a spare when purchasing the complete package Spindle controller PE9A300UXXXC03H defective Equipment: - Travel paths: 500 x 400 x 410 mm - HSK-A40 tool spindle - Spindle speed: 12–12,000 rpm - Coolant filtration unit 20 μm - Through-spindle coolant 70 bar - Interface for connecting Kitagawa rotary table - Machine weight: 2,250 kg Total price for all three items. Ex works Luckenwalde (Germany), not loaded, without transport. Individual sale of the machines may be possible.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 6,500 h, General Data Measurements width 1800 mm Measurements depth 2200 mm Measurements height 2200 mm Machine weight 5000 kg Control Unit Brand BROTHER Main Drive Spindle speed range 10000 Number of axis 4 Movement X-Axis Movement 700 mm Y-Axis Movement 400 mm Z-Axis Movement 350 mm Table Table load 250 kg Kjdexpkt Rjpfx Aadedw This 4-axis Brother Speedio S700X1 was manufactured in 2014. It features a robust table size of 700 x 400 mm and a maximum table load of 250 kg. Equipped with a high-speed spindle up to 10,000 rpm and a 15 kW motor, it supports a tool magazine with 24 tools. Ideal for precise and efficient machining. Contact us for more information about this machine. Application Types Milling

Year of construction: 2021, condition: excellent (used), functionality: fully functional, The induction sealer is used for sealing PET and PP bottles with an aluminum protective lid. It is particularly recommended for the chemical, pharmaceutical, and cosmetics industries, as well as wherever it is necessary to secure volatile or corrosive substances from uncontrolled leakage. Main features: • Suitable for use with plastic or glass containers. • Very easy to operate • Handheld device for small production runs • Portable and does not require a dedicated workspace • Packaging speed: approx. 20-40 pcs/min (depending on the operator and product being sealed) • Maximum container diameter: 60-130 mm • Maximum distance between the inductor and container: 3 mm • Activated by a switch located on top of the inductor Control panel: • On/Off switch • Fuse Kedpfx Aaoxlm Shjdjdw • Digital display indicating current • Digital display indicating time • Overheat protection – the device automatically shuts down until it cools down

Condition: good (used), Year of construction: 2008, Machine type: Machining centers (vertical) Manufacturer: Brother Model: TC-S2A Serial No. Control system: Brother A00 Ksdpfx Aaott Apwjdodw Year of Manufacture: 2008 There are 21 pcs. machines of Brother TC-32A in stock Spindle speed 10,000 rpm Spindle motor power 6.7 kW Number of axis 3 Traverse path X-Axis travel 480 mm Y-Axis travel 360 mm Z-Axis travel 270 mm Table Surface 600×400 mm Max.Load 150 kg Spindle Holder BT30 Tool Magzine 14 Machine Dimension 1.800×1.600×2.360 mm Machine Weight 1.800

Condition: good (used), High-speed machining center Brother TC-22A Year of manufacture: 2008 Serial number: 122085 Spindle run time: 4,694 h Operating hours: 16,191 h Table: 850 x 450 mm Travel X / Y / Z: 500 / 450 / 410 mm Table load capacity: 300 kg Spindle taper: HSK 40 Spindle speeds: 12 – 10,000 rpm Tool changer: 24 positions Feed X/Y: 1 – 10,000 mm/min. Feed Z: 1 – 20,000 mm/min. Rapid traverse X/Y: 36 m/min. Rapid traverse Z: 50 m/min. Kjdpfx Aajxvy Nzodsdw 4th axis by Lehmann The machine is in fully functional and immediately operational condition.

Condition: used, Year of construction: 1998, x-travel 480 mm y-travel 360 mm z-travel 270 mm Control Brother turning speed range - main spindle 6 - 6.000 min/-1 drive capacity - main spindle 5 / 7 kW tool taper SK 30 table surface area 600 x 300 mm rapid traverse ( x / y / z ) 36 / 36 / 30 m/min number of tool places 14 Pos. The machine is defective and is being sold as a spare parts carrier. Kdodpsxddvhefx Aadsw The extraction system is NOT included in the scope of delivery. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical specifications and information, as well as subject to prior sale!

Condition: excellent (used), functionality: fully functional, Brother Hi-Spin riveting machine 5mm high spin Type: BR1-103 - Crimping ability Kjdewdwv Repfx Aadjdw (Mild steel rivet) φ5mm or less - Spinning head: 20-40mm - Distance between tabletop and punch: 60-180mm - Table working surface size: 310 x 180mm - Processing time setting range: 0.3-5 seconds - Normal pressure: (Varies depending on pressing conditions) 2-5kg/cm2 Air consumption: Power supply and motor Three-phase 200V 0.2kw 4Pole Machine size Width 390 x depth 510 x height 1000mm Machine weight 95kg

Condition: used, Year of construction: 2004, X-Axis 700 mm Y-Axis 360 mm Kedpjumrpzefx Aadodw Z-Axis 270 mm Table size length 600 mm width 300 mm Number of tool pockets 21 Spindle taper BT-30 Max. spindle speed 10000 rpm Length x width x height 1828.8 × 1574.8 × 2209.8 Weight 1800.4 kg

Year of construction: 1999, condition: good (used), machine/vehicle number: 112150, Table surface area: 300 x 500 mm Travels x / y / z: 420/300/250 mm Spindle mount: BT 30 small / large Distance table / spindle: Spindle speeds: approx. 10 - 10000 rpm Feeds: approx. 5 - 10000 mm / min Kdodef Sainepfx Aadjw Rapid traverse: x u. y / z 25/20 m / min Spindle drive: 7 kW electr. Connection: 400 V, approx. 9 kVA kW Required space: 2500 x 1500 x 1450 mm Weight: approx. 2800 kg

Condition: used, Year of construction: 1996, x-travel 700 mm y-travel 320 mm z-travel 270 mm turning speed range - main spindle 10 - 10.000 min/-1 drive capacity - main spindle 5 kW Kedpfx Aajxddvbodjdw tool taper ISO 30 / MAS-BT table surface area 800 x 300 mm table load capacity 300 kg distance spindle /table 450 mm rapid traverse ( x / y / z ) 30 m/min Feed ( x / y / z) 5 - 10.000 mm/min number of tool places 14 Pos. tool diameter 80 mm tool length - max. 200 mm weight of tools max. 3 (gesamt 25) kg Overall size 1830 x 2950 x 2410 mm total power requirement 9 kVA The machine is defective and is being sold as a spare parts carrier. The extraction system is NOT included in the scope of delivery. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical specifications and information, as well as subject to prior sale!

Year of construction: 1992, condition: used, table mounting size: 2x 350 x 300 mm Kdjdpfx Ascaldxoadsw movements x/y/z: 700/300/250 mm spindle taper: BT 30 ISA min./max. distance table/spindle: 450 mm spindle turning speed range: 6 - 6000 rpm number ob tool positions: 10 pieces carriages: 5 - 10000 mm/min rapid move: x u. y/z 25/20 m/min spindle drive: 3,1/4,1 kW electrical connection: 400 V kW weight: 2600 kg