Used Brushing Machine for sale (63,905)

Condition: excellent (used), Catalogue number 7321 TECHNICAL DATA - Max workpiece height: 90 mm - Max workpiece width: 130 mm From above: - Sliding belt - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down) From below: - Feed belt - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down) From the side: - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down, front/back + angle) - Brush diameter: 220 mm - Stepless speed adjustment of sanding units via inverter - Stepless feed belt speed adjustment - Feed motor: 0.55 kW - Pull-out support table - Extraction port diameter: 3 × 120 mm - Overall dimensions (L/W/H): 2200 × 1200 × 1400 mm - Weight: 672 kg ADVANTAGES – Italian-made – 6 sanding units – Used sander – In very good condition Net price: 22,900 PLN Nkjdpfjymm Nksx Ag Nou Net price: 5,450 EUR (based on exchange rate of 4.2 EUR) (Prices may vary according to larger exchange rate fluctuations)

Condition: new, Year of construction: 2024, functionality: fully functional, Rusticating machine for wooden artifacts such as bead boards,profiles.joists and floorboards ,with maximum width 40 or 60 cm x 30 cm height. Equipped with integrated 45 mm diameter motor-shaft assembly to ensure maximum rigidity, dynamically balanced brushes at high speed to work vibration-free. The machine consists of two brushing units that are independent of each other; the first unit (steel brush) is used for roughing while the second (silicon carbide brush) is used for finishing.It is possible to vary the degree of rustication by setting the working depth. Nkjdpfx Agsh Auu Ao Nsu

Condition: excellent (used), Year of construction: 2007, Automatic fender polisher 5 brush groups Njdpfjtp Ncljx Ag Njku

Condition: used, turning speeds 450 / 700 / 1.400 U/min transmission ratio 3 output 0,2 / 0,5 / 0,6 kW current 0,6 / 1,0 / 1,1 A table surface area 540 x 390 mm 0 380 V / 50 Hz chuck RÖHM / 165 mm Brush diameter 235 mm dimensions 0,80 x 0,44 x 1,13 mm Brushing Machine HAHN & KOLB - UVM Type 2 Nedpsym D Abefx Ag Nsku - incl. braking system

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4650x2230x2135 mm Weight 5800 kg Total power requirement 19,8 kw Nodpjvz Epuofx Ag Njku

Condition: used, Brush deburring machine, tube deburring machine ERINI type 250 Year of construction approx. 1995 Brush diameter 250 mm Brush width 25 - 60 mm Nksdspu R Ngopfx Ag Nou Speed 1500 / 3000 rpm Power 2,2 / 2,8 kW Mains connection 380 Volt, 50 Hz - Material support - New deburring brush - Suction connection Ø 100 mm Space requirement L x W x H 620 x 500 x 1150 mm Weight 100 kg good condition

Condition: excellent (used), Year of construction: 2018, QUICKWOOD CD5/200 brushing machine Nkedpfxjw Ihwls Ag Nju

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1946, CB VERA 1000 sanding-brushing machine, fully functional. Sold together with brushes and interchangeable inserts for them. Nedjynkxrspfx Ag Njku

Condition: like new (used), Year of construction: 2020, For Sale: Brushing Machine CR24 Nedpewu Di Eofx Ag Noku Manufacturer: ELDRUT SYSTEM, Kielce, Poland Model: Brushing Machine CR24 Serial Number: 9/2020 Year of Manufacture: January 2020 Power Supply: 400V, 50 Hz Certification: CE The machine is in very good condition, ideal for industrial brushing applications. Reliable construction according to European standards.

Year of construction: 2014, condition: used, machine/vehicle number: 753.04.14, Equipment: - Brush grinding machine with rotating grinding brush belt - Motorized height adjustment of the grinding unit, adjustment range from approx. 0 - 80 mm, freely programmable via machine control. - Operating side in the direction of travel, right - Rotating brush set consisting of 174 segment brushes, length 1,300 mm. Segments are easy to change and are inserted into the brush belt from the side. - With vacuum conveyor belt - With cleaning roller for the feed belt Technical data: - Working width: 1300 mm Nkjdsxrb Rfopfx Ag Nju - Max. part thickness approx. 80 mm (depending on the abrasive coating) - Working height: 850 - 900 mm - Year of manufacture 2014 - Feed continuously adjustable, 3 m/min-10 m/min - Machine length: 3860 mm - Machine width: 2400 mm - Machine height: 2000 mm - Paint finish in RAL 7035, light gray with - Contrast color green - Voltage: 400V/50HZ - Electrical connection 16kW/36A - Machine weight: approx. 2600 kg

Condition: used, Year of construction: 2017, machine/vehicle number: 16493, - Manufacturer Leif & Lorenz - Type B6 - Working width 1.300 mm - Year of manufacture 2017 - 1st unit - Distributor brush system FlexTrim - Motor power 1.1 kW - Brush head speed, frequency converter control - With vacuum conveyor belt - Feed continuously adjustable - Length 1,000 mm - Location, in stock - Color RAL 7035 - Volt, HZ 400/50 Nkjdpfx Ajumvrasg Neu

Year of construction: 1999, condition: used, machine/vehicle number: 942, - Manufacturer: Fladder - Type. Gyro 300 VAC Ex - Working width 1300 mm - Year of construction 1999 - Number of brush heads 6 pcs. - Rotating and oscillating sanding unit - 2 vacuum fans- Motor power 7.5 kW Nkodpfxjvwa Dro Ag Nsu - With vacuum conveyor belt - Electrical connection switch cabinet 1, machine 10kW - Electrical connection switch cabinet 2, vacuum fan, 15kW - Feed infinitely variable 2 - 8 m/min - Length 2070 mm - Width 2370 mm - Height 2240 mm - Weight 2300 kg - Separate switch cabinet, Dimensions: W: 800mm, Depth: 400mm, Height: 1700mm - Location, in stock - Volt, HZ 400 / 50

Year of construction: 1999, condition: used, machine/vehicle number: 942, - Manufacturer Fladder - Type Gyro 300 VAC Ex - Working width 1300 mm - Year of manufacture 1999 - Number of brush heads 6 pcs. - Rotating and oscillating grinding unit - 2 vacuum fans - Motor power 7.5 kW - With vacuum conveyor belt - Electrical connection control cabinet - Feed continuously adjustable 2 - 8 m/min - Length 2070 mm Nkedevvl H Nopfx Ag Neu - Width 2370 mm - Height 2240 mm - Weight 2300 kg - Separate control cabinet, Dimensions: W: 800 mm, depth: 400 mm, height: 1700 mm - Location, in the warehouse - Volt, HZ 400 / 50

Condition: used, Year of construction: 2001, machine/vehicle number: 001048, - Manufacturer: Unisanding - Type: 2.2.0. 0-30 - Working width: 1300mm - Year of manufacture 2000 - 2 rollers flexibly adjustable from 0-30 ° working from above - Flex-Trim special brushes - Vacuum belt with vacuum motor - With glass pane on the operating side - External control panel with LCD control - Grinding motors: 2 x 2.2 kW with thermal contact - Feed motor: 1 x 1.5 kW with thermal contact - Vacuum motor: 1 x 5.5 kW - Height axis rollers: 1 x 0.18 kW - Feed 2-10 m/min frequency controlled - Brush speed: 50 - 350 rpm, frequency controlled - Voltage: 3 x 400V, 50Hz - El. Power 15KW - Fuse: 63A - Exhaust air volume (vacuum) 3,000 m³/h - Dust extraction volume: 2,000m³/h – 5,000m³/h depending on the customer - Length: 2,170 mm - Width: 2,040mm - Height: 2,030 mm Nksdpfsxtakmsx Ag Nju - Color: RAL 7035 light gray - Operating side: left to right - Ex version: No - Location: at the Blomberg warehouse

Condition: new, Working width: 600 mm Nsdpfxogpgyqo Ag Nsku Maximum element height: 300 mm Feed speed: 4-12 m / min Engine power: 2x4 kW Power supply: 400V Manual height adjustment of the working unit Independent positioning of the first and second work units Safety switch 2 brushes included

Condition: used, Brush deburring machine, tube deburring machine BAUER type BE 1 Machine. No. Year of construction 2005 Brush diameter 250 mm Brush width 25 - 60 mm Speed 1500 / 3000 rpm Nodpjhrkrwofx Ag Njku Power 2.2 / 3 kW Mains connection 380 Volt, 50 Hz - Material support - new deburring brush Space requirement L x W x H 550 x 450 x 440 mm Weight 65 kg good condition

Condition: used, Brush deburring machine, tube deburring machine BAUER type BE 1 Machine No. 29 Year of manufacture 1992 Brush diameter 250 mm Brush width 25 - 55 mm Speed 1500 / 3000 rpm Power 2.2 / 3 kW Mains connection 380 Volt, 50 Hz Nodpfshrkrpsx Ag Nsku - Material support table Required space (L x W x H) 500 x 450 x 440 mm Weight 45 kg good condition

Condition: used, Brush deburring machine, presumably BAUER Year of manufacture: approx. 1985 Nkjdpfx Ajxrgupeg Nou Brush diameter: 250 / 300 mm Brush width: 20–60 mm Speed: 1500 / 3000 rpm Power: approx. 2 / 3 kW Mains connection: 380 Volt, 50 Hz - with table base Required space (L x W x H): 700 x 600 x 1250 mm Weight: 120 kg In good condition

Condition: new, Sarmax CHEYENNE SP2 600 Brush Aging Machine Nsdpsyf Dclsfx Ag Neku Working width: 600 mm Maximum working height: 300 mm Transport belt with adjustable speed: 3–15 m/min Includes: steel brush + tynex brush Total power: 9 kW Technical documentation CE certificate Brand new machine available on order

Condition: new, functionality: fully functional, Aging brush machine Sarmax CHEYENNE SP2 400 working width 400 mm maximum working height 300 mm conveyor belt with adjustable speed 3–15 m/min includes steel brush and tynex brush Total power 7 kW technical documentation CE certificate Brand new machine available on order Nodpsyf Av Rjfx Ag Nsku

Condition: ready for operation (used), Year of construction: 1977, A roller wide belt brushing machine Tilleke is available. Working width: 700mm, Machine dimensions X/Y/Z: approx. 1500mm/1000mm/1600mm, Weight: approx. 750kg. An on-site inspection is possible. Nkedpfx Agoynltqj Neu

Condition: good (used), Year of construction: 2007, functionality: fully functional, The Italmeccanica MacPower 6TE/480/1600 is an industrial brushing machine / surface processing line for panels and sheet elements (e.g., MDF, chipboard, wood). The unit is designed for brushing, structuring, and finishing panel surfaces in woodworking and furniture manufacturing processes. Main features and parameters (typical for the MacPower series): • Working width: approx. 1600 mm • Multi-head brushing system (longitudinal and transverse brush groups) • Capable of processing both surfaces and panel edges • Designed for continuous operation in production lines • Robust industrial build, high efficiency, and consistent processing quality • Industrial 3-phase power supply • Typical applications: surface structuring, finishing of furniture panels, door components, wood-based boards The MecPower/MacPower series by Italmeccanica is used in industrial panel brushing lines. Machines are often equipped with multiple brush groups and a working width of 1600 mm, allowing the processing of large sheet elements. Italmeccanica MacPower 6TE/480/1600 Machine type: brushing / structure sanding machine for panels Manufacturer: Italmeccanica (Italy) 🔧 Working data • Working width: 1600 mm • Material pass-through height: approx. 130 mm (typical for the series) • Minimum piece length: approx. 400 mm • Number of working units: 6 • Top units: 2 • Side units: 3 • Longitudinal/transverse units: combination of longitudinal and transverse brushes • Edge processing: yes • Rollers/brushes: multizone horizontal and transverse brushes ⚡ Electrical data • Installed power: approx. 11–17 kW (depending on configuration) • Power supply: 3-phase 400 V, 50 Hz • Extraction system: dust extraction ports on the working units 📏 Dimensions and weight (typical for 1600 version) • Length: approx. 3300 mm • Width: approx. 2450 mm • Height: approx. 2250 mm • Weight: approx. 1500–3000 kg (depending on equipment) Nsdpfsykzigsx Ag Njku

Condition: used, machine/vehicle number: 007307, Max. working width: 3200 mm Nksdpfx Agsuaq D Aj Neu Max. working thickness: 60 mm

Condition: new, Year of construction: 2025, Working width: 600 mm Working height: 300 mm Minimum workpiece length: 250 mm Units: 2 brush units, centrally adjustable electrically with fine offset adjustment 1st brush: Metal brush, diameter 210 mm 2nd brush: Tynex brush, grit 80, diameter 210 mm Nksdpfx Agsxwnils Nou Height adjustment: electric Height display: mechanical counter Feed speed: 4 - 12 m/min Brush motor power: 2 x 4 kW Feed motor power: 0.37 kW Machine length: Machine width: Weight:

Condition: used, Technical details: Nedpfx Aewiu Smog Noku Weight: ca. 80 kg dimension machine xH: ca. 077 x 0,45 x 0,5 m BRUSH MACHINE *