Used Brushing Machine for sale (92,052)

Year of construction: 2025, condition: new, DOLFIN-kbn2 series parts washing machines are used for the purpose of washing the parts, which are also larger in size and heavy, requiring rinsing, passivation or another process, particularly after washing. While it is desired to have no oil and other contaminants on the surface before assembly or packaging at the businesses and factories manufacturing parts in masses, it may also be necessary to remove the washing chemical used in the 1st stage from the surface of the part according to the utilization areas of the part. For this requirement, rinsing or a similar implementation in 2nd step is compulsory. Our KBN 2 series parts washing devices are special devices that contain more than one tank and/or bath. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. After the washing process and following the direction of the washing chemical to its own tank, the rinsing operation starts in the 2nd tank. Prsdpfxev S Dihe Aahsc If desired, the 3rd tank can be added and another function is added after rinsing. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labor. The device automatically completes the loop in accordance with the values of the washing parameters that have been entered from the control panel before operation. All processes are carried out with specially prepared programs along with PLC. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley. We produce for you with 40+ years of experience! We export to more than 30+ countries with quality and trust.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, turning length: 760 mm, turning diameter: 400 mm, spindle bore: 54 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 150 rpm, Equipment: rotational speed infinitely variable, As-good-as-new teach-in lathe for both conventional and CNC turning operations. Includes tool trolley with various cutters, inserts, drill heads, and tapping head. Psdpfxoxb A Iks Aaherc

Condition: excellent (used), Year of construction: 2018, turning diameter: 560 mm, spindle speed (min.): 1,800 rpm, turning length: 3,000 mm, XYZ Proturn SLX555 ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2018) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2018 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 6340kg Supplied with: 3 Jaw Chuck 4 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. QCTP & Holders Fixed Steady Interlocking Guards Auto Lubrication. Coolant. Worklight Tooling as Photographed We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79000 Prsdpfx Aaoxc Nmishoc Machine Serial Number: SLM00083 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, BROACHING MACHINE Pjdpfx Ast Hr Dfsaherc

Condition: like new (used), Year of construction: 2021, operating hours: 250 h, functionality: fully functional, overall weight: 2,000 kg, total length: 3,500 mm, total width: 1,800 mm, total height: 2,100 mm, type of input current: three-phase, CNC Milling Machine for Sale Due to Retirement. Description For sale: CNC milling and cutting machine. Specifications: - Year: 09/11/2021 - Working table dimensions: 1500 x 3000 mm - Automatic tool changer - 9000W air-cooled spindle - 8-tool linear magazine - 4-zone vacuum table with pneumatic stops - 7500W 380V vacuum pump - 2-bag chip vacuum extractor, 1500W 220V Prsdpfx Aoxcvzmsahjc - Compressor - Z-axis travel: 200mm (X: 3000mm, Y: 1500mm) - Yaskawa 750W servo motors on X, Y, and Z axes - Cutting tools (carbide, diamond) - Various additional equipment - Spare parts kit - Control station with computer - Software included: - TopSolid (expandable for design and drafting) - CamBam (programming) - Opticoupe (cutting optimization) Vanloisir is a van conversion company based in Charente-Maritime, operating for over 11 years. Due to retirement, we have decided to sell our CNC machine, along with all software (TopSolid) and accessories. We are offering the complete package for €14,000. For an additional fee, training for the machine's operation can also be arranged.

Condition: excellent (used), Year of construction: 2019, The machine is in very good condition – the latest model is designed for poultry slaughter and initial processing, ensuring a capacity of 13,500 birds per hour. Technical Specification Model: 20x6" Capacity: 13,500 birds/hour Live weight: 1.2-4.0 kg Number of units: 20 Prjdpfx Aewdidmeahoc Shackle pitch: 6" Ijbtt Shev Avvuedfjar Length (X): 2508 mm Height (Y): 2985 mm Width (Z1): 1693 mm Width (Z2): 3092 mm Width (Z3): 2580 mm Weight: 1535 kg Water consumption: 1.0 m³/h Water connection: High pressure: 40 bar; Medium pressure: 8 bar; Low pressure: 2-3 bar Water inlet: 3/8" BSP Drain connection: DN100 BSP

Condition: new, Year of construction: 2025, operating hours: 24 h, functionality: fully functional, DOLFİN-PYM2 series parts washing machines are industrial purposed parts cleaning devices that are used before and after revision, particularly in repair and maintenance services. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labour. It works automatically in accordance with the temperature and time values that are set during operation. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley. Pjdpfxsv Sa I Ts Aahorc

Condition: excellent (used), With acid-resistant section, with high pressure nozzles, equipped with a conveyor Overall Size: 9,5 x 1,15 x 1,9 m Opening size: 530 x 250 mm Chemical tank (heated): 0,5m³ Predpfxet Ity Dj Aahsc Rinse tank (heated): 0,3 m³ Drying fans: 12db Voltage: 380 V

Condition: excellent (used), Year of construction: 2013, Travels X-axis: 650 mm Y-axis: 560 mm Z-axis: 560 mm Rapid traverse: 32 m/min 2 work tables each: (setup side / machining side) Pallet dimensions: 500 x 500 mm Possible table position: 360,000 degrees Max. workpiece weight: 400 kg MILLING SPINDLE Spindle mount: SK-40 DIN 69871 Direct drive: 8,000 rpm with gear box Drive power: 10 / 16 kW Tool changer Tool changer type: Double gripper Number of tools: 40 Max. tool diameter: ø 115 mm Max. tool length: 300 mm Internal coolant system Spindle cooler Chip conveyor Connection data and dimensions Air connection: 6 bar Total connected load: 25 kVA Rated voltage: 380V 50/60 Hz Minimum machine weight: 6,700 kg Machine dimensions (LxWxH): 3,500 x 2,500 x 2,650 mm Psdpfx Aaev Sdcnshsrc Very compact machine! Video available.

Condition: refurbished (used), ROLLFORMING MACHINE PRODUCING SQUARE PROFILES WITH 5 TONES OF TOOLS MADE IN ITALY Prjdefgl Aqopfx Aahsc

Condition: new, Year of construction: 2025, total height: 2,100 mm, total length: 8,500 mm, total width: 1,400 mm, overall weight: 1,850 kg, working height: 900 mm, The machine is engineered to handle the connection nuts of solar panel frames, executing drilling, tapping, and cutting operations concurrently within a singular unit. Thanks to the simultaneous processing of four profiles, it allows for the production of one nut every 1.5 seconds. Pedpevvkvpsfx Aaherc Please contact us for detailed informations.

Condition: excellent (used), functionality: fully functional, Heating medium: oil Motor and pump: 1.5 kW Heating: 7.6 kW Predpfx Asv S Srwsahoc Two units available Price: EUR 500 per unit Price for both devices: EUR 900!!!

Condition: new, functionality: fully functional, Year of construction: 2025, The GREENBULL 510 is a trailed implement. Its PTO drive powers a high-performance fan, capable of providing 20 meters of coverage on both sides. Both the track width and axle height are adjustable in two positions, allowing the machine to be configured to the specific dimensions of the area requiring protection. The unit is designed with simplicity in mind, ensuring cost-efficiency and operational effectiveness go hand in hand. Its performance is unmatched within this segment, as operating temperatures do not require limitation—even under severe frost conditions. Machine Specifications: - Length: 4450 mm - Width: 1750 mm Psdpfx Aasw Dqkbehjrc - Height: 1730 mm - Weight (without pellets and water): 1300 kg - Maximum coverage: 7–10 hectares - Average pellet consumption: 100–150 kg/hour - Minimum tractor power requirement: 65 HP - Water tank capacity: 420 liters - Pellet tank capacity: 500 kg - Adjustable ground clearance: 2-step setting - Adjustable track width Advantages of the frost protection machine: - Enhanced crop yield through effective frost protection - Adjustable track width and ground clearance for flexible adaptation - User-friendly; operation possible by a single person - Shields against both radiation and advection frost - Trailed construction for ease of transport and field deployment - No leaf scorch due to the protective water curtain - Highly economical with low operational costs - Temperature control accessible from the tractor cab - Favorable maintenance costs - Environmentally friendly – operates on biomass pellets - Does not require permits (construction or environmental authorization not needed)

Condition: good (used), Press machine, hydraulic press, used machine Manufacturer: SEJFO Model: 7051-3 Overall dimensions: 800 x 1400 x 2480 mm Podpfx Aot A U Irsahjrc Weight: 996 kg Stroke length: 300 mm Maximum hydraulic pressure: 140 Bar Year of manufacture: 1997 Hydraulic power supply: 380 V; 50 Hz

Condition: excellent (used), Year of construction: 2007, XYZ Proturn SLX 355 ProtoTRAK CNC Gap Bed Centre Lathe ProtoTRAK SLX Control (2007) Max’ Distance Between Centres 1000mm Max’ Swing over Cross-slide 225mm Max Swing over Bed 360mm Spindle Bore 52mm Spindle Speeds 50 – 4000 rev/min Spindle Motor 5.75Kw Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2007 Supplied with: 3 Jaw Chuck Interlocking Chuck & Main Guards Machine Manuals 3 Toolholders (More available if required). TRAKing Constant Surface Speed Coolant Worklight Auto Lubrication Prodpfxsxawdkj Aahoc Jet Machinery Stock No: #78986 Machine Serial Number: SL286 Cost: £19,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 5 h, drilling depth: 4,000 mm, MM-14K Screw Foundation Drive Head Predpfjridg Dsx Aahjc Our anchor drives for mini loaders and mini machines up to 3.5 tonnes have been developed in conjunction with the leading screw anchor/pile installers around the world. Digga's range of compact planetary drives form a comprehensive portfolio for the foundation drill, post hole drill, screw pile and utility construction markets. Digga anchor drives are manufactured in Australia specifically for the diverse global landscape. FEATURES: Compact, high torque gearbox manufactured by Digga Lightweight and compact for easy transport Fitted with high efficiency Danfoss/Digga Geroler hydraulic motor Coming soon: Digga's HALO Alignment System Over 40 years of design and manufacturing experience 1 year gearbox warranty and 1 year motor warranty

Condition: new, Year of construction: 2023, functionality: fully functional, 5-axis travelling column machining centre - SAMAG SFZ3500- with swivel head and internal rotary table (Ø:1000mm, interference Ø:1300mm) X:3500mm Y:1000mm Z:1000mm Spindle: SK50 max. 12,000rpm 54kW Tool changer: 60 Prjdettv Haspfx Aahsc Control: Heidenhain TNC7 Coolant system with paper belt filter Internal coolant supply: 40bar (max. 80bar) Internal air supply through the spindle 3D touch probes Collision monitoring (DCM) Kinematics Opt The machine is available at short notice and can be inspected and tested at the factory.

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, GS-20050H0G Section Steel Laser Cutting Machine Beam cross-section size: 450×400mm Beam center span: 2400mm Bevel cutting highly enhances competitiveness Smart cutting head equipped with professional Acu3D rotary axis Achieves multi-directional, multi-angle 3D cutting Psdpfx Ajw I Ilisahjrc (Web beveling, R-corner cutting, V bevel, Y bevel) Versatile cutting Sheet, tube, and section steel cutting in one One-stop processing workflow, seamlessly integrated with TEKLA Easily complete drawing import - nesting & programming - process setup - material alignment - cutting Tube cutting Supports high-precision cutting of round tubes with diameters from 600–1200 mm Section steel cutting Supports cutting of H-beams up to 1200 mm

Condition: new, Year of construction: 2024, This tube cutter is suitable for cutting various types of paper tubes. It can automatically cut the long paper tubes produced into several shorter ones according to demand without flattening the thin tubes. Fast pipe discharge speed, high efficiency, smooth cutting surface, no rough edge, light and easy operation, low energy consumption. The machine adopts servo drive, PLC control, CNC touch screen, the system is equipped with compensation system, making the cutting more accurate. This machine adopts fixed knife to cut, the paper tube turns when cutting, the die blade does not move, effectively protect the blade and die, extend the service life of the machine. The size of pipe cutting mould can be adjusted according to customer's requirement. It is easy and quick to replace the mould. The machine can be customized according to the paper tube to meet the needs of the customer site. Specification Paper tube length - 10-1000 mm Paper tube diameter - Ø20-200 mm Paper tube thickness - 1-20 mm Number of cutter - 1 piece Pjdpfxortnnye Aahsrc Minimum cut length - 10 mm Cutting Mode - Paper tube turn Feed way - pneumatic (0.4MPa) Operator - 1 person Speed control - servo motor Main motor - 2.2kw Servo motor - 1.5kw Voltage - 380v, 50hz Dimension - 1900*850*1250mm Cutter specifications - Ф83*Ф32*1.2 Weight - 700kg

Condition: good (used), Overall size: 900x900x1800 mm Podpfxjf Nkgvj Aahorc Stroke length: 80 mm Weight: 702 kg The machine used for electric motor coal/carbon brush pressing

Condition: ready for operation (used), Year of construction: 2002, XYZ TC250 Vulcan Turning Centre Year of manufacture 2002 Ø250mm 3 Jaw Power Chuck. Max. Swing Ø500mm. Max. Swing Over Cross Slide Ø330mm. Max. Turning Length 650mm. Spindle Bore Ø87mm. Max. Bar Capacity Ø77mm. Axis Travel 'X'=220mm, 'Z'=650mm. Maximum Spindle Speed 3,500rpm (22.5kW Motor). Spindle Nose A2-8. 12 Position Turret (VDI 40 Toolholders). Prsdpfew U Ekcox Aahec *For sale with Jet Machinery Ltd* Stock No: 78992 Serial No: 202068 Price: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: SPR210, The SPR-210 semi-automatic flat labeling machine is suitable for labeling products with flat surfaces, such as paper boxes, plastic bags, bottle caps, pouches, and other packaging. The machine is widely used in industries such as food processing, cosmetics, medicine, electronics, office supplies, and others. Prsdpfx Aaowixtzehsc For the following product sizes: Length: 20 mm - 500 mm Width: 40 mm - 400 mm Height: 10 mm - 300 mm

Condition: excellent (used), Year of construction: 2020, Machines for the production of medical masks type llr , ffp2. Price per piece. Prodpfx Aor Iydyjahoc

Year of construction: 2021, operating hours: 5 h, condition: new, functionality: fully functional, Vertical packaging machine for packaging smaller goods. Chicken strips, chicken wings, tea, granules and the like. Pedpfx Aaourry Rshjrc The machine was not used at all.

Condition: new, functionality: fully functional, Year of construction: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, High-strength welding bed Prjdpfx Aaew A Iilehsc Partitioned smoke extraction system Fully automatic butter injection system Fully automatic cutting, material saving, fast speed Cutting area 4000 × 2000 mm X‑axis travel 1520 mm Y‑axis travel 4020 mm Z‑axis travel 80 mm Max. combined positioning speed 170 m/min Acceleration 2.8 G Machine dimensions (L×W×H) 9500 × 2900 × 2380 mm Footprint 10500 × 3400 mm Net weight 8500 kg