Used Bulk for sale (680)

Year of construction: 2026, condition: new, Screening machine | Oscillating screen type ASM-550 Demonstration machine - Make: S&F GmbH - Type: ASM-550 - Screening capacity: approx. 60 - 70 m³/h (for wood chips and sawdust) Hedpfsxtfv Iex Abtst - Screening area: 5.4 m² - Fractions: 3 or 4 pieces - Screen decks: 3 pieces - Drive power: 4.0 kW - Machine weight: approx. 3,800 kg - Machine colour: RAL 6011 Reseda green - Screen inserts and material outlet freely selectable Suitable for screening the following bulk materials, among others: - Wood chips and wood shavings - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Vibrating screen | Wood chip screen | Vibrating screen machine | Flat screen | Vibrating screen | Roll sifter | Screening machine for wood chips

Condition: new, functionality: fully functional, control type: CNC control, laser power: 3,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 10 mm, table length: 3,050 mm, table width: 1,530 mm, working length: 3,050 mm, working width: 1,530 mm, cutting speed: 120 mm/min, positioning accuracy: 0.02 mm, repeat accuracy: 0.02 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, IMPACT 3015A Fiber laser cutting machine suitable for high-precision cutting of metal plates, with high photoelectric conversion rate. It is a new energy-saving and environmentally friendly product, and one of the world’s leading technology products. It is suitable for cutting metal plates such as stainless steel, carbon steel, alloy steel, silicon steel, aluminum, copper, brass, titanium alloy, galvanized sheets, etc. Unmatched Accessibility - Because the machine is an "open type" (without a full protective enclosure), operators have 360° access to the cutting bed. This makes loading raw sheets and unloading finished parts significantly faster and easier, especially when using a forklift or overhead crane. Space Efficiency - The 3015 model is designed with a compact footprint. Without the bulk of a large safety cabin or a dual-shuttle table system, it fits comfortably into smaller workshops where floor space is at a premium, providing a high "power-to-square-foot" ratio. Cost-Effectiveness - Open-type machines generally have a lower initial investment compared to fully enclosed or exchange-table models. They are also easier to maintain, as all mechanical components (rails, racks, and motors) are readily accessible for routine cleaning and lubrication. Efficient and precise cutting of medium and thin plates: • Easy access for loading and unloading the material from all 4 sides; • Auto-focus laser head; • Automatic edge detection; • Nesting included for optimizing the drawings and optimize material usage; • Easy to operate; • CE standard. Positioning accuracy ±0.02 mm Repeatability accuracy ±0.02 mm Maximum speed 120 m/min Maximum acceleration 1.0G Complete set of consumables included Nesting and automatic edge detection functions included Windows interface with internet & WIFI and assist service Wireless remote for easy control Movable operating panel with arm and LCD display 18.5 inch Automatic oil lubrication system Oxygen low pressure alarm Hsdpfx Ajyhclwjbtot Exhaust smoke system with centrifugal fan Industrial cooling/heating system of the laser head and laser source - Dual cooling system Voltage stabilizer & regulator unit CE mark Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 5,000 mm, total width: 1,200 mm, total height: 820 mm, overall weight: 760 kg, power: 2.2 kW (2.99 HP), input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: The ASCO CB 5000 is ideal for construction sites, recycling facilities, screening plants, and composting operations, ensuring efficient, continuous, and safe transport of bulk materials such as soil, gravel, sand, and compost. This version is a stationary machine, meaning the belt conveyor is fixed to the floor or ground and ready for permanent operation. Users benefit from reliable performance in daily operation and a stable, robust installation for continuous material handling. Key Features: • Adjustable conveyor angle & belt tension • Modular design with length extension option • Stationary floor-mounted configuration • Integrated hourcounter for maintenance planning • Robust build for continuous industrial use Tech Highlights: Hsdpfx Abjyin Elotjt Length 5.0 m · Width 1,2 m · Height 0,82 m · Belt width 0.6 m · Capacity 20–110 m³/h · Speed 10–135 cm/s · Drive P 2.2 kW / 400 V · Hopper capacity 0.2–0.5 m³ · Hopper length 0,8 - 1,6 m · Weight 760 kg

Condition: new, Year of construction: 2025, VFFS machine with 10-head multihead weigher for bulk materials and granulates. Compact design without platform stand. Suitable for form, fill and seal of pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; pneumatic sealing unit for end sealing; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications multihead weigher: number of weighing heads: 10 heads; weighing range (single dump): 10-1500g; volume per weighing head: 1.6L; weighing accuracy: X(0.5); discharge flap: single flap; surface finshing: plain surface (optional for surcharge dimpled surface); product contact parts from: AISI 304 (optional for surcharge AISI 316). - Specifications VFFS machine: max. speed of the machine in neutral: 60 cycles/min; bag sizes: L(40-300)xW(60-220)mm, (double film pulling possible for longer bags); suitable film width: 140-460mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; power consumption: 4.1kW; air pressure: 0.4-0.8MPa; compressed air consumption: 0.6m³/min; dimensions (LxWxH): 1766*1246*2163 mm; weight: 786kg. Hjdpfjv Nm Uhjx Abtet

Condition: new, Year of construction: 2025, VFFS machine with integrated free-fall metal detector for checking vertically falling products and with 10-head multihead weigher for bulk materials and granulates. Compact design without platform stand. Suitable for form, fill and seal of pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; pneumatic sealing unit for end sealing; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications multihead weigher: number of weighing heads: 10 heads; weighing range (single dump): 10-1500g; volume per weighing head: 1.6L; weighing accuracy: X(0.5); discharge flap: single flap; surface finshing: plain surface (optional for surcharge dimpled surface); product contact parts from: AISI 304 (optional for surcharge AISI 316). - Specifications free-fall metal detector: sensitivity: FE from Ø 1.2mm, AISI from Ø 2.5mm; tube diameter: according to the forming collar. - Specifications VFFS machine: max. speed of the machine in neutral: 65 cycles/min; bag sizes: L(40-350)xW(70-270)mm, (double film pulling possible for longer bags); suitable film width: 160-560mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; air pressure: 0.4-0.8MPa. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Hodpfxjv Nnbvs Abtet

Condition: used, mileage: 2,84,300 km, power: 309 kW (420.12 HP), first registration: 07/2020, fuel type: diesel, empty load weight: 15,200 kg, maximum load weight: 16,800 kg, overall weight: 32,000 kg, wheelbase: 5,100 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, air conditioning, cruise control, differential lock, low noise, navigation system, onboard computer, parking heater, soot filter, trailer coupling, MAN TGS 35.420 8x2-6 BL M-Tec hooklift/tipper/bulk carrier combination unit First registration: 7/2020 Only 284,300 km with supporting documentation Euro 6 emission standard Long-distance cab Automatic transmission Retarder Air conditioning, auxiliary heater Navigation system Lane keeping assist, adaptive cruise control Trailer coupling Weight variant 35,000 kg 8x2-6 axle configuration Hsdsx U Egfopfx Abtet Leaf/air suspension 2nd axle can be lifted 4th axle can be steered and lifted Wheelbase 5100 mm Tires 315/70R22.5, tread depth approximately 50% Unladen weight 15,200 kg Hooklift/tipper/bulk carrier combination unit M-Tec HLS 20 Year of manufacture 2020 For roll-off containers and bulk carriers Additional unit TSA pocket silo Lifting and tilting capacity max.: 20,000 kg Export/net price: 79,900 Euro All information is without guarantee, subject to change.

Condition: used, overall weight: 24,000 kg, rotor diameter: 640 mm, number of blades: 114, rotor length: 2,500 mm, power: 247 kW (335.83 HP), No. 10023 Single-shaft shredder Vecoplan VAZ 2500 Hodowh T N Uepfx Abtst Used, year of construction approx. 2006 2022 general overhaul Since overhaul approx. 700 operating hours Areas of application: Residual wood, waste wood, packaging material, film, plastic, paper, textiles, domestic waste, commercial waste, production residues as bulk material, production residues in bales 247 kW Rotor length 2500 mm Rotor diameter 640 mm 114 pieces 60x60 cube knives, 4-row Shredding optionally to a grain size of approx. 10 - 250 mm Screen basket 50 mm Throughput capacity up to 25 tons per hour / throughput waste wood approx. 30 tons per hour Material feed with hydraulic pusher Scope of delivery: machine, hopper, control cabinet, refrigerator Conveyor belts optionally available Transport dimensions approx. 4750 x 4640 x 2340 mm LWH Weight approx. 24000 kg Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), 2 x 55 m³ aluminum silos with extended support ring, ø 3,000 mm (powder silo) Capacity: approx. 55,000 liters Manufacturer: Zeppelin Year of construction: 2005 Quantity: 2 Diameter: approx. 3,000 mm Cylindrical height: approx. 10,025 mm Total height: approx. 11,265 mm Weight: approx. 1,900 kg Hodjwg Dd Hspfx Abtet Bulk density: 0.6 kg/dm³ Material: AlMg3 Connections and fittings: On the top deck: 1 x roof edge railing (ø 3,000 x 1,250 mm) 2 x crane lugs 1 x manhole opening DN 600 1 x flange DN 150 1 x flange DN 100 (filling nozzle) 1 x flange DN 100 1 x flange DN 250 (with pressure/vacuum relief valve) 1 x threaded connection 1 1/2" (full indicator) 1 x threaded connection 1 1/2" (spare) 1 x silo filter (Infrastaub make) On the shell: 1 x filling pipe 1 x access door One of the silos is equipped with a double-flight access ladder with safety cage. The silo terminates in a 60° cone with a DN 150 flange including inspection slide gate. Drawing available Otherwise as per photos.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 8,000 mm, total width: 1,200 mm, total height: 820 mm, overall weight: 1,060 kg, power: 2.2 kW (2.99 HP), input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: The ASCO CB 8000 Conveyor Belt is ideal for construction, composting, earthworks, and industrial recycling, efficiently transporting bulk materials over longer distances. Its robust 8-meter design and adjustable settings ensure high throughput, precise material control, and reliable operation in demanding environments. Hsdpfx Abewytrgotjt Key Features: • Adjustable belt tension and conveying angle for precise material flow • Modular design with easy length extension for flexible setups • Integrated hour counter for maintenance tracking • Quick setup and easy transport for on-site adaptability • Durable, low-maintenance construction for continuous operation Tech Highlights: Speed 10 – 135 cm/s · Capacity 20 – 100 m³/h · Belt width 0.6 m · Hopper length 0.8 – 1.6 m · Hopper capacity 0.2 – 0.5 m³ · Drive power 400 V / 2.2 kW · Weight 1060 kg · Width 1.2 m · Length 8 m · Height 0.82 m

Condition: ready for operation (used), Trowal Vibrator – Walther Trowal – Industrial Vibratory Machine For sale is a robust industrial vibrator from Trowal (Walther Trowal), suitable for reliable use in bulk material and parts conveying applications. Hsdpfx Asx Htbhsbtet The machine stands out with its heavy-duty construction, consistent vibration performance, and durable spring suspension. Ideally suited for conveying, dosing, or singulating tasks in industry, recycling, or metalworking. Equipment & Features: • Original Trowal / Walther Trowal vibrator • Sturdy feed hopper with flap • Vibration trough with spring suspension • Integrated control cabinet with controls • Solid industrial design – built for continuous operation • Used, fully functional (age- and usage-related signs of wear) Typical Fields of Application: • Metal and parts conveying • Bulk material processing • Recycling plants • Industrial and production facilities Condition: Used, with visible signs of wear, technically functional as stated. Scope of Delivery: Machine as shown. Crane mounted on the conveyor unit for extracting heavy materials.

Condition: used, Tilting container for forklifts Chip container – bulk container – folding container Load capacity: approx. 1000 kg Volume: 1 m³ Hedpfohly Ifjx Abtjt Entry bracket: 230 x 110 mm Fork spacing (inside): 160 mm Fork spacing (outside): max. 600 mm - Entry pockets for forklift forks – entry bracket for transport and emptying using a forklift or tow truck - Manual tilting mechanism via hand lever - 4 plastic support rollers, Ø 175, and 2 steerable rollers - Folding drawbar Weight: 220 kg Length: 1700 mm Width: 1060 mm Height: 1500 mm Very good condition Suitable for collecting, storing, and transferring valuable materials.

Condition: used, maximum load weight: 24,830 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 01/2007, loading space volume: 51 m³, Equipment: ABS, approx. 51,000 liters Heitling silo trailer for animal feed / 7 chambers / forced steering / aluminum rims ----* Manufacturer: Heitling * First registered: 01/2007 * Total weight: 32,000 kg * Empty weight according to vehicle registration document: 7,170 kg * Payload: 24,830 kg * Volume: 51m³ in 7 chambers (6.3m³/6.3m³/8.6m³/5.8m³/(5.8m³/8.6m³/9.6m³) * Axles: 2 x SAF / 2nd axle forced steering * Tires: 425/65 R 22.5 aluminum rims * Suspension: air suspension with lifting and lowering * EBS * Pressure tank 2 bar * 7 chambers * 7 Sliding lid * 7 udders * 6 floor emptying flaps NW200 with external control on the right Hjdoq I H N Hspfx Abtjt * Discharge line NW80 to the rear * Solimar loosening * Access with walkway at the rear left * Central lubrication * Control box at the rear * Hose box left and right * LED work lights * LED reversing lights * Rotating beacon at the rear * Tool box on the left * Cyclone * Full load supports * Single fender German vehicle!! German papers!!

Condition: refurbished (used), Year of construction: 1992, operating hours: 3,998 h, functionality: fully functional, machine/vehicle number: 100175, We are selling a used Franke drum washing system for washing bulk goods, primarily for turned and milled parts. Facilities of the facility: Tanks made entirely of stainless steel 600 liter washing tank with 18 KW heating 600 liter flushing tank with 18 KW heating Insulation of both tanks Weekly timer for the heating Washing drum can be switched via rotary button, 360° rotation or standstill when washing and rinsing including speed sensor Exhaust fan with 900 m3/hr. Oil separator over large disc skimmer with pan and ball valve automatic water dosing / Geka coupling at the rear 2 washing baskets 530 x 300 x 200 mm with tension lid, mesh size 6x6 mm 50 kg load per washing basket Pneumatic door opening and switching from washing to rinsing To be attached to the front frame as a basket support with 4 M12 screws Drain taps for washing and rinsing tanks as well as two large maintenance hatches Good accessibility on all sides, 2 x folding doors at the front and the remaining side walls can be removed using quick-release fasteners Rexroth pneumatics Grundfos stator pump in the washing and rinsing tank 63 A Mennekes plug with 5 meter cable Rital control cabinet with accessories inside operation manual Machine ready for immediate use Delivery and commissioning possible after consultation and cost assumption Hsdpeqwnypefx Abtst If you have any further questions, please write or call

Condition: new, empty load weight: 880 kg, maximum load weight: 2,620 kg, overall weight: 3,500 kg, loading space length: 4,400 mm, loading space width: 1,830 mm, tire size: 195/50R13C, Disposal of bulk material, bulky waste, rubble, garden waste or similar and the delivery of building material, gravel, sand and firewood is made much easier with this skip container trailer. You place the skip or flatbed of the car trailer directly in the driveway or in front of the house for your customers. The building rubble from the old bathroom goes into the steel skip. This means that several construction sites can be managed simultaneously by one driver. Hedpfoq Ru U Usx Abtot With the hook and the built-in electro-hydraulics with radio remote control, the optional skips or flatbeds can be easily picked up and pushed off the car trailer. The trailer can also be used as a reverse tipper by operating the frame. When pulling up, the containers lock automatically and are secured against falling off the skip container trailer. ATTENTION: Skip and platform are not included in the price! The skip trailer has the following as standard a hook with hydraulic ram, electric hydraulics and built-in battery, radio remote control, charger, 3 axles, support wheel, extremely stable welded frame and V-drawbar painted in dark gray. The skip body trailer is available with steel skips, flatbeds, grid attachment, tarpaulin & frame and anti-theft device as accessories.

Condition: new, Year of construction: 2024, SCHORR track dumper RR500DHKA2 PRO: - 9.2 HP four-stroke engine - Self-propelled & powerful track drive - 500kg payload - Large & high-quality tipper body with large tipping angle - Folding passenger platform as standard - 6+2 gears - Robust and scratch-resistant - Top price-performance ratio SCHORR TRACK DUMPER RR500DHKA2 PRO WITH TIPPING HYDRAULICS AND RIDER PLATFORM The SCHORR RR500DHKA2 track dumper has a hydraulic tipping drive and a payload of 500 kg as well as a powerful 9.2 hp single-cylinder 4-stroke petrol engine. The robust transmission has 6 forward gears and 2 reverse gears. Thanks to its slim design (710 mm), the minidumper can also drive through narrow paths and doors, making it an extremely flexible means of transportation. Thanks to the minidumper's powerful track drive, you can also overcome rough terrain, inclines and kerbs with ease. The rubber tracks provide a secure footing in any working area. Lifting and lowering the tipper body / box is effortless and effortless thanks to the hydraulic tipper drive, even when fully loaded. With a robust skip made of thick sheet metal and a straight outlet that ensures quick and easy discharge, this dumper is a must for anyone who needs to transport heavy loads. Even tipping on slight inclines is no problem. The large tipping angle ensures that even fully loaded skips are emptied completely without you having to help manually. This saves time and effort and makes the motorized wheelbarrow an indispensable tool for anyone who values efficiency and performance. The smooth-running chain brakes ensure that the dumper is easy to maneuver. TECHNICAL DATA: Manufacturer (abbreviation): SCHORR Type designation of the manufacturer: RR500 Hodpfx Aottg Rajbtst Model: DHKA2 Load capacity: 500kg Tilt drive: Hydraulic (stepless) Travel drive: Chain Weight without/with packaging: 288 / 328kg Drive Engine: Air-cooled 1 cylinder four-stroke engine (OHV) Starter: Reversing starter Power: 9,2PS Gearbox: 6 forward gears / 2 reverse gears Maximum speed Forward gear: max. 8km/h Reverse gear: max. 5 Liquids Fuel tank capacity: 6L (unleaded petrol) Hydraulic oil tank capacity: 3L (ISO VG 32) Transmission oil tank capacity: 1.5L (SAE 80W-90) Engine oil tank capacity: 0.9L (15W-40) Max. Hydraulic oil flow rate: 9L/min Basic dimensions Total length platform folded: 1800mm Total length platform unfolded: 2000mm Total width (incl. chain): 710mm Overall height: 1050mm Container dimensions (inside): 740 x 665 x 435mm Container dimensions (outer dimensions): 1060 x 710 x 520mm Track width: 710mm Load volume (liquid): ~ 200L Load volume (heaped): up to 370L (depending on load) Drive chain dimensions: 180 x 60 x 38mm Ground clearance: 120mm Packaging size: 1890 x 740 x 1220mm Filling height Side: 810mm Front: 580mm A REAL ALL-ROUNDER The RR500DHKA2 minidumper offers a flexible and mobile solution for transporting materials (e.g. bulk material) in construction projects, especially on uneven terrain. Thanks to its compact design and chain drive, the dumper is very maneuverable, making it particularly suitable for construction and gardening work. The built-in tipping hydraulics are very robust and make working with the device considerably easier compared to manually operated tipping systems.

Condition: new, Year of construction: 2026, T460 Fully Automatic Solid Wood Saw 4 m Fully automatic cutting of medium-large timber with simple-to-use automation. Put down any wood and the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of timber lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). Highly suitable for: • Frame and truss manufacture • Pallets manufacture Hsdpjmdqf Rjfx Abtjt • Windows and doors manufacture • Furniture manufacture • Bulk timber cutting Model: T460 Length: 4 m Linear Unit: ProfiStop Omicron Material Length: 3230 mm Pushing capacity: 60 – 120 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, A550 Fully Automatic Mitre Solid Wood 4.5 m Fully automatic cutting of medium-large timber with simple-to-use automation. Put down any wood and the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of timber lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. • Automatic optimiser mode with timber laser length measure and optimisation for minimum waste (optional). Hsdemdq H Ajpfx Abtst • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Frame and truss manufacture • Sheds manufacture • Furniture manufacture • Mitre timber structures manufacture • Bulk timber cutting Model: A550 Length: 4.5 m Linear Unit: ProfiStop Alpha Material Length: 3180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, A550 Fully Automatic Mitre Solid Wood 9 m Fully automatic cutting of medium-large timber with simple-to-use automation. Put down any wood and the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of timber lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. Hedpfx Absmdq H Uetst • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. • Automatic optimiser mode with timber laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Frame and truss manufacture • Sheds manufacture • Furniture manufacture • Mitre timber structures manufacture • Bulk timber cutting Model: A550 Length: 9 m Linear Unit: ProfiStop Alpha Material Length: 8580 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: excellent (used), Aluminum silo (plastic granulate silo) standing on a base ring – used – designed for a bulk density of 1.0 kg/dm³ Hsdpfx Abolg Dcfetot Volume: 105,000 liters Manufacturer: Zeppelin Available quantity: 1 Diameter: approx. 3,000 mm Cylindrical height: approx. 17,500 mm Overall height: approx. 15,000 mm (including 1,250 mm roof edge railing) Material: AlMg3 Bulk density: 1.0 kg/dm³ Inclination of the upper floor: 15° Inclination of the cone: 60° Equipment and connections: In the upper floor: 1 x access dome DN 500 with hinged cover 1 x ventilation opening with hood 2 x flange DN 100 PN 10 (filling + level indicator) 1 x stub for full-level indicator 1 x roof edge railing with handrail 2 x crane eyes On the shell: 1 x access door 850 x 2000 8 x pipe support for filling pipe DN 100 1 x filling pipe DN 100 1 x cable duct 1 x stub for full-level indicator The silo ends at the bottom in a 60° cone with a flange DN 200 (discharge height: approx. 500 mm) and a suction box. The currently connected measuring and control technology is included. However, no guarantee is given for its function! Additional cost: The silo has a two-part ladder with back protection and a landing platform (additional cost: €950 plus VAT). Otherwise, as shown in the pictures and drawing.

Year of construction: 2026, condition: new, Zig Zag Air Sifter Sizes/ wides from 200mm - 1800mm Precondition for the separation are differences in the material like: - Different sizes of particles - Differences of the density - Differences in the surface condition of the particle - Differences in the form of the particle - Grain size 0.1mm - 40mm, (bigger particles are possible with a special design) We are the manufacturers of these plants and we build Zig Zag Sifter Plants in different sizes see attachment. In order to make you a definite offer we need to know some points: 1. What material you want to separate? 2. Grain-size of the material? Hedpfx Abjchb Ruotot 3. Bulk weight kg/liter of your material. 4. We have technical center at our house, where we can test your material.

Condition: new, Year of construction: 2025, machine/vehicle number: 2021, 3D AC SERVO SkyCNC WK Series machine - 1250 mm x 1250 mm x 220 mm High precision - milling and drilling with extremely high speed and quality. As CNC Milling machines manufacturer whistler-technology with SkyCNC CNC milling and engraving your partner. Our PFEIFER technology SkyCNC WK series milling machines with high-precision ball screw drive on all axes provide highest precision, accuracy and speed - with a pleasant value for money.   By building a high solid steel base frame ca. 2,2 t high static rigidity of the machine is achieved, so that the processing of solid woods and various metals will be trouble. The sophisticated location and distribution of 35mm linear rails and guides and the associated massive portal with its vibration damping characteristics distinguish our CNC milling machines made especially. The superior programmable CNC control allows flexible intervention via touchscreen in all production conditions and is standard in our PFEIFER technology SkyCNC WK series milling machines. This CNC control, you can create your milling data or CAD / CAM import data and then can be processed independently of a computer.   The tool changer (up to 16 tools), the vacuum table made of solid aluminum, various tool / workpiece cooling solutions, the automatic lubricating device for all axes and other refined details, complete this milling system.   With the PFEIFER technology SkyCNC WK series you get a reliable and efficient bulk - Portal - milling system for your applications. Hedpfx Ae Sd U Dsbtot   - Drive system: high-precision ballscrew on X and Y axis and Z axis of high-precision manufacturing - Operating speed: 15 m / min - Xyz Workspace / traverse: 1250 x 1250 x 220 mm - Table size (vacuum table with milled vacuum tracks): 1220 x 1220 x 30 mm - Xyz Repeatability: 0.03mm - Xyz accuracy: 0.01 mm - Compatible with DIN ISO CAM etc. - Format: ISO standard G-code, FANUC compatible - Additional: Spindle motor / tool changer / Vacuum table according to customer requirements - Warranty: 2 years - Spindle Power: from 5.5kW (other spindle power optional) - Spindle speed: 6000-24000 U / min (depending on requirements) - Spindle taper: BT 30 4ea ER20 (other recordings optional) - Drive: AC SERVO motors on all axes - Tool changer: 6 magazine slots - Power supply: AC400 V ± 10% 50Hz - Power 10-15 kW (depending on equipment) - Dimensions: 2670 (L) X 1735 (W) x 1790 (H) mm - Weight: 2700 kg

Condition: new, Year of construction: 2024, functionality: fully functional, total height: 2,140 mm, total width: 1,040 mm, empty load weight: 509 kg, total length: 1,300 mm, The WKS in maximum format with 250 mm extended depth and "armored pull-outs" for heavy and bulky voluminous stored goods Tool cabinet with 3 vertical pull-outs each 300 mm wide with 1,800 kg load capacity each Hodpfxouwlxro Abtjt Fully assembled including 30 WKH 927 bulk goods trays, each with 4 dividers TRB 927/928 Dimensions: 1,040 w x 2,140 h x 1,300 t Empty weight: 509 kg Structure powder-coated in Gentian blue RAL 5010 (body) and gray white RAL 9002 (pull-outs)

Condition: used, Stainless steel rotating valve. Hedpsx Rz Rxefx Abtst Diameter 250 mm. Motor 0,75 kW, IP 55.

Year of construction: 2017, condition: used, Manufacturer: Tietjen Type: NDK 5.2-S Hsdex R Aw Tepfx Abtst Year: 2017 Type : Hammer mill Applications : Designed for wet shredding of bulk food and agricultural products, Motor type : hydraulic Frame and rotor in stainless steel 304, 1.4301. Weight (excluding motor): 1250 kg Injection nozzles for liquids Bearing temperature monitoring Pneumatically operated inlet flap

Condition: used, Year of construction: 1990, For sale: MAKRUM 41.98 Hammer Mill – 55 kW Used MAKRUM hammer mill, model 41.98 with 55 kW motor, available for sale. The machine is in good technical condition, fully operational and ready for work. Perfect for grinding bulk materials in manufacturing plants. Technical data: Manufacturer: MAKRUM Model: 41.98 Motor power: 55 kW Condition: Used, operational For any questions, please contact me. Hsdew Eafqspfx Abtst