Used Camshaft Grinding Machine for sale (65,266)

Condition: excellent (used), Year of construction: 1995, operating hours: 3,372 h, functionality: fully functional, machine/vehicle number: 1562057, input frequency: 50 Hz, type of input current: three-phase, input voltage: 400 V, Bavelloni B73CN vertical edge polishing machine with 7 spindles, in very good working condition. The machine has only completed 36,689 polishing cycles and is fully complete/ready for immediate use. The machine is available immediately. Todpfx Aie Af Ia Rsrod

Condition: used, Year of construction: 1979, Technical details: grinding diameter min/max: Aufnahme: Ø 200 x 32 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,6 m The grinding spindle is equipped with two hand levers: Tedsu Ng Ncopfx Aired Working range left = hand grinding device for small shank drills, grinding wheel currently Ø 120 x 30mm; admission=Ø 32mm; speed 3000 rpm.; with grinding support Working range right = swiveling device for conical shank drill; cup grinding wheel currently Ø 160 x 30mm; admission=Ø 32mm; speed 3000 rpm. Cutting angle max 180° for double-edged and 120° for triple-edged Clearance angle 5° - 9°; drill-Ø 8 - 40mm, possible grinding modes e.g.: normal grinding, DK-grinding, center grinding, spiral grinding, step drill grinding Machine illumination available *

Condition: used, Universal external and internal cylindrical grinding machine ERWIN JUNKER, Type BUAJ 29 NC External cylindrical grinding machine, internal cylindrical grinding machine Manufacturer's No. 3126, Year of manufacture 2001 Center distance max. 800 mm Workpiece grinding length max. 800 mm Center height 150 mm Swivel diameter max. 295 mm Workpiece weight max. 120 kg Workpiece spindle speed 20 - 750 rpm Spindle stock, internal taper MK 5 Spindle stock, short taper flange DIN 55027, Size 5, Ø 82 mm Spindle stock, spindle bore 36 mm Spindle stock adjustment 355 mm Tailstock, internal taper MK 4 Grinding wheel diameter max. 400 mm Grinding wheel width max. 63 mm Grinding wheel bore Ø 127 mm Grinding wheel peripheral speed 45 m/sec Tsdj Aard Nspfx Airod Automatic spindle stock feed 0.001 Manual feed 0.001 mm Hydraulic table movement 0-7.5 m/min Motor power, grinding spindle 7.5 kW Motor power, workpiece spindle stock 1.1 kW Motor power, internal grinding unit 1.75 kW Mains connection 400 Volt, 50 Hz - FANUC control, Type Power Mate-Model D - Grinding spindle stock swivels from +45° to -15° - Workpiece spindle stock swivels 90° - Table can be tilted for taper grinding up to 8°30" - Support/pinole for the workpiece spindle stock with internal taper MK 4 - Internal grinding unit for swiveling in - Internal grinding spindle with collet chuck, Ø 6 mm - Coolant system located beside the machine - Machine equipped with one grinding wheel, Ø 400 x 50 mm - 1 three-jaw chuck TOS, Ø 160 mm - 1 mechanical round magnetic chuck, Ø 200 mm - Collet chuck system with various collets - Various attachments for the internal grinding unit - 1 diamond grinding wheel dresser - Other accessories as shown in the pictures - Operating manual, hydraulic diagram, electrical diagram Space requirement for cylindrical grinding machine with band filter L x W x H 3200 x 2500 x 1900 mm Weight 5000 kg In very good condition

Condition: used, functionality: fully functional, overall weight: 2,000 kg, Description: For sale is a high-quality JOTES SWA-10A cylindrical grinding machine, a proven and reliable industrial machine. Tjdpfx Aezrvx Djirsd Suitable for external and taper grinding. Simple and durable mechanical design. The machine is in full working order; a video demonstrating its operation is available. It is connected to the power supply and ready for on-site testing before purchase. Technical specifications: Manufacturer: JOTES Model: SWA-10A Type: cylindrical grinding machine (for shafts and bores) Maximum grinding length: approx. 1000 mm Maximum diameter: approx. 250 mm Weight: approx. 1500–2000 kg Power: approx. 3–5 kW The machine is ideal for industrial plants and workshops requiring precise grinding of large components. Transportation throughout Poland is possible upon agreement. We can issue a VAT invoice or a receipt. Please contact us to arrange details regarding collection, testing, and transportation.

Condition: used, Year of construction: 2026, CORMAK MM3156C 400V Drum Sander for Wood The CORMAK MM3156C 400V is a technologically advanced conveyor drum sander designed for precise and repeatable surface finishing of flat workpieces. Thanks to its robust construction, smooth operation, and interchangeable drum system, the machine is ideal for sanding solid wood, veneers, furniture boards, as well as metals and plastics. The MM3156C is intended for continuous operation in production facilities and woodworking workshops where precision, consistency, and reliability are essential. Key Advantages Interchangeable sanding drums – allows quick adaptation to different materials such as wood, metal, and veneered panels. Dual drum speed– 750/1440 RPM enables optimal adjustment to the type of surface and required sanding aggressiveness. High precision– a rigid frame with a cast-iron arm and hardened guideways ensures accurate shaft guidance and consistent finishing quality. Mechanical thickness gauge– allows precise setting and monitoring of machining parameters. Tode Af H D Iepfx Aired Self-cooling aluminum drum– accurately balanced and resistant to overheating during continuous operation. Optional brush drums– the machine can be converted into a wood aging/distressing sander with additional equipment. Construction and Technology The CORMAK MM3156C drum sander has been developed for industrial applications. The reinforced sanding shaft design, high-quality bronze bushings, and conveyor belt tensioners ensure long service life and stable, backlash-free operation. A reinforced coupling provides efficient torque transmission from the 1.5 kW motor to the working shaft. The machine features continuously variable feed speed adjustment from 0 to 3 m/min, allowing the operator to match the feed rate to the material type and sanding requirements. The table guidance system, equipped with hardened guide rails and a cast-iron body, effectively minimizes vibration and increases the rigidity of the entire structure. With a working width of 560 mm and a maximum workpiece height of 80 mm, the MM3156C is an optimal solution for both high-volume production and precision custom work. Standard Equipment Aluminum sanding drum Mechanical thickness adjustment gauge Main motor with total power output of 2.0 kW (S1: 1.5 kW, 400V) Variable-speed feed drive (0–3 m/min) Conveyor belt tensioning system Side guide fence for workpiece alignment Ø100 mm dust extraction port Technical Specifications Maximum sanding height 80 mm Maximum sanding width 560 mm Minimum workpiece thickness 3.5 mm Minimum workpiece length 600 mm Drum size 133 × 560 mm Maximum material removal per pass 0.5 mm Drum speed 750 / 1440 RPM Feed speed adjustment 0 – 3 m/min Feed motor power 50 W Main motor power (S1/S6) 1.5 / 2.0 kW Dust extraction port diameter 100 mm Weight 145 kg PLEASE NOTE!!! This machine is a returned item. It has paintwork damage and a dirty feed belt. NO WARRANTY AND NO RETURNS!

Condition: good (used), functionality: fully functional, - Brand: JUNG - Model: FD3 surface grinder - X-axis travel: 500mm - Y-axis travel: 200mm - Hydraulic feed for X-axis Tsdpfxe Aa Dlxj Airod - Automatic feed for Y-axis - Max. grinding wheel diameter: 220mm - Dust extraction system - Complete with attachments and grinding wheels.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, overall weight: 3,400 kg, year of last overhaul: 2023, CNC machining center – MASTER 23.M – year 2007 – operational, good condition, in continuous use. For sale: a MASTER 23.M CNC machining center from 2007. The machine is operational and in good technical condition, ready for further use. It can also be used for stone processing. Machine specifications: Manufacturer: MASTER Model: 23.M Type: CNC machining center Year of manufacture: 2007 Technical condition: good Machine: operational, can be inspected while in operation Control: CNC Maximum working area: 2500mm x 1300mm, front can be opened Tedpoz E U N Ssfx Airjd Industrial construction, designed for professional machining Used machine, sold as seen in the pictures Technical condition The center is running and operational. The machine can be inspected by a prospective buyer before purchase. Please contact us for further information, photos, and to arrange a viewing and demonstration of the machine.

Year of construction: 1973, condition: used, Rated voltage: 380V AC, rated power: 2.4kW, rated current: 12A, components: grinding wheelhead, workpiece headstock, internal grinding attachment, machine bed, longitudinal slide, coolant system, collection tray, pneumatic system, swiveling grinding head, grinding wheel guard, metal protective covers. An on-site inspection is possible. Tsdpjz S Iw Rofx Airod

Condition: reconditioned (used), center height: 200 mm, grinding length: 1,000 mm, center width: 1,000 mm, total width: 1,500 mm, total length: 2,800 mm, total height: 1,700 mm, grinding wheel width: 127 mm, spindle speed (max.): 1,500 rpm, External Cylindrical Grinding Machine Manufacturer: COMETA Model: SUSY Technical Data: Tjdpfxoy Ay N Ds Airsd - Center height: 200 mm - Distance between centers: 1,000 mm - Grinding length: 1,000 mm - Max. workpiece diameter: 360 mm - Grinding wheel width: 127 mm - Spindle speed: 1,500 rpm - Speed range – workpiece spindle: 15 – 320 rpm - Dimensions (L x W x H): 2.80 x 1.50 x 1.70 m Equipment & Accessories: - Machine has been overhauled - Guideways re-scraped - Spindle bearings replaced - New control cabinet In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 2010, 2 CNC cylindrical grinding machines Manufacturer: Junker Type: Jumat 3000/50S Year of manufacture: 2010 Control system: Siemens The technical specifications can be found in the attachment (images 11–13). Tsdpfx Aj Agr H Reirod Accessories, tools and clamping devices shown in the images are only included in the scope of delivery if this is explicitly stated in the additional information.

Condition: used, Year of construction: 1995, Surface grinding machine Manufacturer: Jung Type: JA 500 CNC-C Year of manufacture: 1995 Overhauled in: 2003 Grinding length: 500 mm Grinding width: 200 mm Maximum workpiece height: 250 mm Table dimensions X/Y: 600 mm / 200 mm Grinding wheel diameter: 225 mm Grinding wheel width: 25 mm Grinding wheel bore: 51 mm Speed: 4,200 rpm Machine weight: approx. 2,500 kg 121026 Tjdpfewp E Rgsx Airjd

Condition: refurbished (used), Machine totaly reconditioned With DRO Center height 175 mm Distance between centers 1000 mm Grinding wheel 400 x 50 x 127 mm + 225 x 20 x 76.2 mm Grinding wheel speeds 1'500-2'200 rpm Tsdowhk Uuopfx Airsd With internal grinding attachement Misc. accessories MARCELS MASCHINEN AG

Condition: used, The Reckmann LM 16 profile grinding machine grinds profiles on wooden workpieces for woodworking. It is used to machine workpieces with profiled surfaces. The profile is transferred to the workpiece by means of feed, an oscillating grinding block and a swivelling holder Tjdo Agf Dwspfx Airjd Technical data: - Workpiece width: max. ~ 120 mm - Workpiece height: max. ~ 80 mm - Grinding motor: 0.37 kW

Year of construction: 1989, condition: used, Max. grinding length: 600mm, max. grinding width: 400mm, max. working height with new/worn grinding wheel: 550/650mm, max. workpiece weight: 300kg, clamping surface: 1020x300mm, number of T-slots: 1, T-slot width: 10mm, max. height above floor level: 1005mm, dimensions: 3140x2900x2140mm, weight: 2.9t, with electromagnetic chuck: 600x300mm and coolant system. An on-site inspection is possible. Tedpfo Adt Hysx Airsd

Condition: used, machine/vehicle number: 41225, with digital display, type: CHECKOMATIC 1200, max. grinding length: 420 mm, center height: 150 mm, with pivoting internal grinding spindle, belt filter system, and coolant system. Todpfxez Nhqls Airjd

Condition: used, distance table to spindle center: 650 mm, table length: 1,000 mm, table load: 400 kg, Surface grinder Brand: Jakobsen Model: 1432 Year: 1990 RPM: 1400 Grinding area: 800x400 mm Table size: 1000x350 mm Maximum table load: 400 kg Maximum workpiece height: 475 mm Wheel size: 350x50x127 mm Heidenhain ND 221B digital readout. 800x350 mm Selter electronic magnetic table with magnetization regulator. Maximum distance between table and wheel: 650 mm MONNET filter from 2007 Includes grinding wheel sets (see photos). Tsdpfx Aeyzxfhoirod *Operates perfectly in automatic mode. In manual mode, the X axis is disabled; Y and Z function correctly.

Condition: good (used), Year of construction: 1998, Manufacturer: Henninger Type: ZS-201 Year of manufacture: 1998 Self centerring device Double column slide ways Dressing Unit Tailstock by rack & pinion Eccentric adjustment 0 - 20 mm Tedpfxsvt Tuis Airod Large Cone-Stone tooling package Specifications Metric US Standard Minimum workpiece Ø 20 Ø Min. Maximum workpiece Ø 450 Ø Max. Max. product length 1200 mm Speed 18300 Rpm Max. grinding angle 45 - 120 ° Max. workpiece weight 190 Dimensions (estimate) Length 1250 mm Width 1250 mm Height 1900 mm Weight 365 kg Please note: The information on this page has been compiled to the best of our knowledge and belief by us and, where possible, by the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you review all important details.

Condition: used, Year of construction: 1989, Belt sanding machine Manufacturer: MAFAC / Schwarz Maschinenfabrik Type: NT 200 H Year of manufacture: 1989 Pneumatic belt tensioning system Tsdpez Df E Usfx Aired 191026ä

Condition: excellent (used), Year of construction: 1986, 2 x conventional Thread grinders Buderus-Lindner GUS-B Max. working diameter: 250mm Todpfx Aoz Tfrnjirod Max. working length: 700mm Year of manufacture: 1986 2 x dressers Many change gears Grinding wheels Additional flanges Many other accessories

Condition: excellent (used), Year of construction: 1971, Tos cylindrical grinding machine Complete with all accessories. Todjz N Snzspfx Airjd

Condition: used, Year of construction: 1962, grinding length 450 mm grinding width 250 mm workpiece height 275 mm table surface area 760 x 200 mm distance spindle center to table max. 400 mm table speeds 0 - 30 m/min cross feed 0 - 60 mm/Hub Tedpfx Ae Adalpoirjd rapid traverse cross 1,2 m/min grinding wheel size ø 250 x 30 x ø 51 mm grinding spindle speed 1400 / 2800 U/min total power requirement 4 kW weight of the machine ca. 1 t dimensions of machine L x W x H 1,55 x 1,23 x 1,80 m Accessories: magnetic plate 450 x 175 mm, grinding wheel with flange, wet grinding attachment

Condition: used, Year of construction: 1989, Technical details: Tjdpfx Aisz E Hu Hjrsd rotary table diameter: 630 mm grinding height: 350 mm grinding head - power requirement: 11 kW grinding length: 600 mm max. dia. of grinding wheel: 450 mm grinding spindle speed: 764 -1.485 steples U/min automatic feeds: 0,002 - 0,1 mm table speed: 8 - 128 steples U/min rotary table revolutions per minute : 8 - 128 stepless U/min rotary table: 630 +3° /-5° mm total power requirement: 18,5 kW weight of the machine ca.: 5,5 t dimension machine approx.LxWxH: 2,6 x 2,3 x 2,5 m The rotary table is tiltable. Heavy-duty industrial surface grinding machine from the German manufacturer REFORM, equipped with a horizontal grinding spindle and a large rotary table. The machine is suitable for precision surface grinding of rotationally symmetrical as well as large-area workpieces. The continuously rotating table ensures uniform machining of the workpiece surface. The machine is equipped with a large magnetic rotary chuck, a heavy-duty grinding spindle unit, automatic infeed and grinding movements, as well as a coolant system with filtration unit. Its robust and heavy machine construction is designed for continuous industrial operation and for applications requiring high standards of flatness and surface finish. Particularly suitable for grinding flat workpieces. *

Condition: excellent (used), KELLENBERGER PRECISION UNIVERSAL CYLINDRICAL GRINDING MACHINE TYPE: 600 U YEAR OF MANUFACTURE: 2003 PARTIAL OVERHAUL: 2026 (Technical data see attached documents) Center height: 175 mm (without height adjustment) Grinding length: 600 mm Equipment: - Standard accessories Tsdpfx Aiozhma Derjd - Internal grinding device for D: 80 mm max. incl. coolant supply through the workpiece spindle - Grinding wheel equipment left for D: 400 x 50 x 127 mm (standard) - Grinding wheel equipment right for D: 300 x 40 x 127 - Grinding wheel flange for wheels D: 400 x 50 x 127 mm (left) and D: 300 x 40 x 127 (right), balancing weights outside (3 pieces left, 2 pieces right) - Variable spindle drive with Danfoss frequency converter - Balancing device for dynamic balancing, type ELASO MANOBALANCE 750/EB 2000 - RENAUD internal grinding spindle type REN 828 (grease-lubricated with compressed air lock) - Various internal grinding mandrels for REN 828 – 1235, 1645, 2060, 2575 (4 pieces) - Various chucks HJNZ 28 for HJN 828 with 2 collets D: 3 mm and D: 6 mm - Tailstock standard MK 5 with adapter flange DIN 55027 size 5” Bore D: 38.2 mm (standard) - Sine bar on the tailstock - Tailstock with manual retraction for quill travel - Micrometer adjustment on the tailstock - Pneumatic relief of the tailstock - FORKARDT planetary three-jaw chuck D: 200 mm - REISHAUER wedge-bar three-jaw chuck D: 160 mm - Permanent magnet chuck D: 200 mm - Collet chuck for Schaublin B32 - Set of 59 collets Schaublin B32, D: 1.0 – 30.0 mm, graduation 0.5 mm - Set of 8 workpiece supports incl. holder - Three-jaw steady rest, 175 mm, foldable, D: 3-120 mm - Swiveling dressing tool for dressing during external, surface or internal grinding - Side and angled dressing tool for side and angled dressing of the grinding wheels - Dial indicator stop for table swiveling with dial indicator 1/100 mm - Dial indicator stop for table longitudinal movement with dial indicator 1/100 mm - Dressing stop for internal grinding - HEIDENHAIN Digital length measuring system for the X and Z axes - STREULI paper band filter SPB 3, 90 l/min at 0.26 bar, tank volume 240 l - WALDMANN machine lamp - Set of vibration-damping pads - Three-color paint finish (light gray RAL 7035/blue RAL 5012/dark gray RAL 7016) - New acceptance test report according to KELLENBERGER standard - CE conformity - Documentation Condition: very good, machine geometrically and mechanically overhauled (see geometry report)

Condition: used, Grinding spindle drive: 0.5HP, drive: Vibration-damped electric motor, power transmission: Endless woven flat belt, grinding carriage oscillation rate: 55 or 109 strokes/min, continuously adjustable oscillation stroke: 0-3⅛in, max. oscillation stroke: 79.375mm, pantograph ratio: 50:1, profile reduction: Factor 50, lateral clearance angle: ±10°, front clearance angle: 0-35°, an on-site inspection is possible. Tedps Adt Hgofx Aired

Condition: excellent (used), Year of construction: 2021, operating hours: 120 h, functionality: fully functional, machine/vehicle number: 115698, total length: 12,200 mm, total width: 1,700 mm, total height: 2,000 mm, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, input voltage: 400 V, operating speed: 40 mm/s, pressure: 8 bar, The Bavelloni VE500 V10 is a beveling and edging machine with 10 grinding wheels for processing flat edges with a beveled edge and a variable angle on glass with a thickness of 3 to 51 mm. The Bavelloni VE500 V10 has been designed and built using the latest technologies. The machine grinds and bevels in a single processing cycle, ensuring high productivity and quality. Glass thickness: 3 ÷ 51 mm Minimum height of the workpiece: 70 mm Minimum height of the material being processed for a flat edge with a bevel, when using special holders: 50 mm Todpfxjz Ihdno Airod Angle range: 0° - 45° Installed power: 27.7 Kw Minimum compressed air pressure: 8 bar Maximum compressed air consumption: 25 Nl/min Length: 12200 mm Width: 1703 mm Height: 3350 mm Weight: approximately 4500 Kg Processing speed: 0.5 ÷ 5 m/min Water tank capacity: 720 l