Used Cantilever Rack Shelf for sale (7,747)

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. Gsdpfx Ahemhhx Ij Dsuk The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Year of construction: 2020, condition: new, Cantilever rack, double-sided, 3.50m height, 1.20m arms, 750kg per arm - NEW -: Price ex location including loading! 1 shelf unit with 4 stands € 3.210,- (net)! Price for transport within Germany (excluding islands): € 550 (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: 4 shelf stands, double-sided, approx. 3.50 m high, hot-dip galvanized IPE 160/100 each with 2x3 adjustable. Arms 1.20 m, 750kg load capacity per arm with bandages approx. 1.30 m Shelf uprights on both sides approx. 3500mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity with load center of 600 mm 750 kg per arm / 2250 kg per stand side with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Gedpfx Ahjfivhgs Deuk Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: MING1+11, carrying capacity per cantilever arm: 1,000 kg, shelf height: 3,050 mm, total length: 21,000 mm, total width: 2,150 mm, total height: 3,050 mm, axle spacing: 1,900 mm, load capacity per stand: 7,500 kg, shelf length: 21,000 mm, throat depth: 900 mm, overall weight: 7,000 kg, Equipment: double-sided, OHRA K60K - Double-sided cantilever rack, long goods rack, heavy-duty rack Two racks are available!!! Guodpfxov Smk Ie Ah Dek 12 uprights - 48 cantilever arms K60K Height 3.05m - Uprights IPE200 - Upright spacing 1.9m center-to-center Total depth approx. 2.15m (double-sided) Arms 90cm - IPE100 Load capacity per boom 1000kg Upright load capacity 7500kg Incl. wooden inserts Very good condition, see pictures Forklift available for loading Pickup only by appointment in 75053 Gondelsheim Shipping via freight forwarder is possible, please inquire with your zip code

Condition: used, Cantilever racking, heavy duty racking -without insert trays: none available -Double sided -consisting of: -Shelf: each with 3 uprights, 5.4 m high -Double-sided support arms: 500 mm long -Bolt load capacity: 795 kg -Payload per side: max. 7000 kg -screwed -Number: 3x shelves available -Price per piece Guodpocn Am Iofx Ah Dok -Own weight: 1250 kg / piece

Condition: excellent (used), 30 running meters of shelving Schäfer type R3000 used, as good as new, see pictures height 2,5 m depth 80 cm load / compartment 250 kg bay width ca.128 cm Negotiable price: € 7.550,-- net ex stock Offer consists of: 24 pcs. uprights or frames, 2,5 m, galvanized 144 pcs. shelves, 250 kg load per shelf, galvanized 9 pcs. cross bracing for stiffening. Gedpfxsd Nf Svj Ah Djuk 6 levels per field (of course, more levels are possible for an additional charge) Available also with bay width of 100 cm! Other compositions possible. Heights 2.5 m or 3.5 m available. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our AGB, all prices excl. VAT ex stock). Purchase / Sale We are constantly looking for, or offer numerous articles from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Guodpfod Tbbdjx Ah Dsk Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Year of construction: 2021, condition: new, Cantilever rack, double-sided, 4.16m height, 1.20m arms, 750kg per arm - NEW -: Price ex location including loading! 1 shelf unit with 4 stands 3420,- € (net)! Price for transport within Germany (excluding islands): € 550 (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: Gedpjfivhfofx Ah Deuk 4 shelf stands, double-sided, approx. 4.16 m high, hot-dip galvanized IPE 160/100 each with 2x3 adjustable. Arms 1.20 m, 750kg load capacity per arm with bandages approx. 1.30 m Shelf uprights on both sides approx. 4160mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity at load center of 600 mm 750kg per arm / 2250kg per stand side with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: MING2/3/4/5/6/7, carrying capacity per cantilever arm: 1,000 kg, shelf height: 3,000 mm, total length: 21,000 mm, total width: 2,150 mm, total height: 3,000 mm, axle spacing: 1,480 mm, load capacity per stand: 7,500 kg, shelf length: 21,000 mm, throat depth: 900 mm, overall weight: 6,000 kg, Equipment: double-sided, Ohra - Double-sided cantilever rack, long goods rack, heavy-duty rack Gujdpfx Aov Smm Neh Dsk Consisting of 15 uprights + 60 cantilever arms Height 3.05m - Uprights IPB200 (HEB200) - Upright spacing 1.48m center-to-center Total depth 2.15m (double-sided) Arms 90cm - IPE100 Load capacity per outrigger 1000kg Upright load capacity 7500kg Wooden inserts can be supplied upon request. Six racks are available! 4 with 4 levels - 60 arms 2 with 6 levels - 90 arms + €2,000 surcharge Very good condition, see pictures A forklift is available for loading Pickup only by appointment in 75053 Gondelsheim Shipping via freight forwarder is possible, please inquire with your zip code

Condition: used, Year of construction: 2018, Cantilever rack, heavy duty rack -Manufacturer: Gemac, cantilever rack base field double-sided -Cantilevers: 5 per side -Compartment height: 33 cm -perm. Load: 200 kg per cantilever arm / 1000 kg total. see nameplate -Quantity: 12x shelves available -Price per piece -Dimension: 1315/1210/H2000 mm Gjdpfx Aoryx Tzeh Djuk -Weight: 98 kg/piece

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Guedpsmidyfjfx Ah Dsk Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Year of construction: 2021, condition: new, Cantilever rack, one-sided, 6.30m height, 1.20m arms, 500kg per arm - new -: Price ex location including loading! 1 shelf unit with 4 stands € 4.115 (net)! Transport costs within Germany (excluding islands): € 490 (net)! Gujdpfofivg Rsx Ah Dok Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: Shelf uprights on one side approx. 6,300 mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity with a load center of 600 mm 500 kg per arm / 4,000 kg per stand with 4 stands per arm level 4 x 500kg = 2,000 kg Profiles: frame: IPE220, arms: IPE 80 with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: MING8+10 / 9, carrying capacity per cantilever arm: 1,000 kg, shelf height: 3,000 mm, total length: 21,000 mm, total width: 2,150 mm, total height: 3,000 mm, axle spacing: 1,480 mm, load capacity per stand: 7,500 kg, shelf length: 21,000 mm, throat depth: 900 mm, overall weight: 6,000 kg, Equipment: double-sided, Ohra - Double-sided cantilever racking, long goods racking, heavy-duty racking Consisting of 10 uprights + 40 cantilever arms Height 3.05m - Uprights IPB200 (HEB200) - Upright spacing 1.48m center-to-center Total depth 2.15m (double-sided) Arms 90cm - IPE100 Load capacity per boom 1000kg Upright load capacity 7500kg Wooden inserts can be supplied upon request. Shelf is available 3 times!!!! Nos. 8 and 10 - 4 with 4 levels - 40 arms Gujdsv Smrxjpfx Ah Djk No. 9 - 1 with 6 levels - 60 arms + €1,000 surcharge Very good condition, see pictures Forklift available for loading Pickup only by appointment in 75053 Gondelsheim Shipping via freight forwarder is possible, please inquire with your postal code

Condition: good (used), Year of construction: 1998, Cantilever rack, heavy-duty rack -Manufacturer: LBE, cantilever rack base field double-sided -Cantilever arms: 5 levels per side, length 500 mm -Compartment height: variably adjustable -Load capacity: 1-sided 630 kg, see photos type plate -Quantity: 1x shelf available -Dimensions: 1300/1180/H1985 mm -Weight: 80 kg Gsdotrzpwepfx Ah Djuk

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: Gjdpfxeqt Dmye Ah Douk - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Year of construction: 2021, condition: new, Cantilever rack, one-sided, 3m height, 1.20m arms, 500kg per arm - new -: Price ex location including loading! 1 shelf unit with 4 stands 1.833.- € (net)! Price for transport within Germany (excluding islands): € 500 (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: Shelf uprights on one side approx. 3,000 mm high, hot-dip galvanized, IPE 160 Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity at a load center of 600mm 500 kg per arm / 2250 kg per stand Gujdpfx Ahsddmpvo Dsk with 4 uprights per arm level 4 x 500 kg = 2,000 kg, arms IPE 80, with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: MING11, carrying capacity per cantilever arm: 1,000 kg, shelf height: 3,000 mm, total length: 18,000 mm, total width: 2,000 mm, total height: 3,000 mm, axle spacing: 1,500 mm, load capacity per stand: 7,000 kg, shelf length: 21,000 mm, throat depth: 900 mm, overall weight: 6,000 kg, Equipment: double-sided, Cantilever racking, long goods racking, heavy-duty racking - double-sided Godov Smr Sjpfx Ah Douk Consists of 13 uprights + 52 cantilever arms Height 3m - uprights IPE200 - upright spacing 1.5m center-to-center Total depth 2m (both sides) Arms 90cm - IPE100 Load capacity per outrigger 1000kg Upright load capacity 7000kg Arms are continuously adjustable Including crossbars from arm to arm, including wooden inserts Very good condition, see pictures Forklift available for loading Pickup only by appointment in 75053 Gondelsheim Shipping via freight forwarder is possible, please inquire with your zip code

Condition: good (used), Cantilever racking, heavy-duty racking, single-sided cantilever racking, pallet racking -Cantilever rack: one-sided, 4 bays, solid design, height 2000 mm -Stands: 5 pieces 2000/1370/85 mm -Cantilever arms: 26 pieces 185 x 70 mm -Cantilever length: 17x 850 mm 4x 1060mm / 5x 650 mm -Accessories: Cross braces/angle profiles/mounting clamps see photos -Transport dimensions: 2000/1370/H450 mm Guedpfxeu Npg Ds Ah Dek -Total weight: 590 kg

Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design: Pick-up price: Godpsmhhl Hefx Ah Dsuk Sturdy steel construction made of IPE profiles Shelf height 3500 mm Load capacity per upright 2100 kg Foot section 1200 mm usable depth Cantilever arms height-adjustable in 100 mm increments 3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels) Load capacity per cantilever arm 700 kg Including longitudinal and diagonal bracing Including fastening material (without ground anchors) With assembly instructions and load plates C4 according to DIN standard

Condition: good (used), Year of construction: 2005, Cantilever rack, two-sided, height 2.90 m, arms 1.20 m each with 2 crossbeams between the arms/levels, ideal for storing goods, e.g., on Euro pallets - used -: Price ex-site: €24,500 (net) including disassembly and loading! Price for partial quantities upon request - minimum order per rack! Manufacturer: Bruckamp Shelving Systems Type: unknown Year of construction: 2005 Maximum load per arm: 2,000 kg Arms bolted Maximum load per upright: 2 x 2,000 kg Outreach per arm: 120 cm (IPE 100 standard) Total height per rack: 2.90 m (IPE 160) Number of uprights: 69 (currently 3 x 23) The center distance between the frames is 1,240 mm. The heights of the middle and top levels are fixed. These could possibly be offset by drilling new holes. There are no pre-drilled holes. Version / Shelf A: Divided into three sections on both sides Version / Shelf B: No middle section Version / Shelf C: Central section only on the right Condition: Good Available: Immediately Gujdpfowi I Tdjx Ah Dok Location: Schweinfurt / Würzburg area

Condition: excellent (used), Year of construction: 2013, Cantilever rack, heavy-duty rack, single-sided cantilever rack, pallet rack --Manufacturer: Bito,Cantilever rack one-sided, 3 bays type S height 3220 mm -Stands: 4 pieces 3220/750/75 mm grid 60 mm adjustable -Cantilever arms: 28 pieces 630/40/120 mm usable depth 600 mm -Load capacity level: 1600 kg -Transport dimensions: 3220/800/H360 mm -Total weight: 350 kg Guedpfx Ajtpdm Ijh Dsk

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard Guodpfxsmkixwe Ah Djk = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Year of construction: 2021, condition: new, Cantilever rack, one-sided, 2.60m height, 1m arms, 600kg per arm, hot-dip galvanized - new -: Price: € 1,485,- (net) transport within Germany (excluding islands)!430,-€(netto) Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: German brand manufacturer, new goods Description: - Shelf uprights on one side 2,600 mm high, hot-dip galvanized - Foot and arm depth 1000 mm - each with 3 height-adjustable shelf arms - Load capacity at a load center of 500 mm - 600 kg per arm / 1,800 kg per stand with 4 stands per arm level 4 x 600 kg = 2,400 kg Profiles: Frame (stand): IPE 140, arms IPE 80 with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us! Guodped Epfvefx Ah Dek

Condition: good (used), Cantilever rack, heavy-duty rack -Cantilever rack: base field double-sided, 2 uprights -Cantilever arms: 4 per side, length 500 mm -Compartment height: variably adjustable -Quantity: 2x shelves available Gjdpfxsr Ngpxs Ah Dsuk -Price per piece -Dimensions: 1180/1195/H2960 mm -Weight: 139kg / 140kg

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. Gjdpfeh Ek Daex Ah Douk The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2020, Cantilever rack, one-sided, 6.30m high, 1.20m arms, 900kg per arm - new - : Price ex location incl. loading! 1 shelving unit with 4 uprights 3.732.-€ (net)! Transportation costs within Germany (without islands): 490.-€ (net)! One cantilever shelving system, hot-dip galvanized, consisting of: Shelving upright, one-sided approx. 6,300 mm high, hot-dip galvanized Base and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity with load center 600 mm 900 kg per arm / 4,000 kg per upright with 4 uprights per arm level 4 x 900 kg = 3,600 kg Profiles: Frame: IPE220, arms: IPE 100 Gsdpfxefivg Ss Ah Deuk with longitudinal and diagonal bracing e = 1300mm, standard is 1.30m. Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m there is a small surcharge on top of the stated price! Special dimensions (other center distances) are also available on request, but also cost extra and have a longer delivery time as they have to be made separately! If you do not specify a different center distance, we will deliver the shelf with a center distance of 1.30m. In this case, the length of a row of shelves with 4 uprights (3 bays) is approx. 4m. Supplied with all nuts and bolts (dispatch within Germany by parcel direct from Würth), without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) available! Please contact us!