Used Camping Shelves for sale (1,312)

Condition: like new (used), Year of construction: 2022, Cantilever rack used: screw system in hot-dip galvanized finish Scope of delivery: 8Med3Imfm7 4 rack uprights height 4,160 mm with foot section 1,200 m effective depth 12 cantilever arms with 1,200 mm effective depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (bolts, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4.160 mm - Load capacity per upright 2.250 kg - Base and cantilever arms with 1.200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Technical advice by telephone - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.

Condition: good (used), Year of construction: 2007, approx. 240 bays shelving racks, SSI Schäfer R3000, approx. 1m x 0.40m, height 2.28m (other heights on request) used - : Price ex location per base bay: 109.-€ (net), per extension field: 89.-€ (net)! Price per additional shelf: €6 (net)! Frames are NEW, shelves are used! Dmq097 Other frame heights on request! We reserve the right to a minimum purchase quantity! Manufacturer: SSI Schäfer Type: R3000 Year of construction: 2007, frames are new Frame height approx. 2.28m Shelf dimensions: 0.98m x 0.39m depth Bay depth: 0.40 Bay width: 1m 5 shelves per bay (additional shelves available at extra cost) Load capacity per shelf min. 100kg, more likely 150kg per shelf Side frame: open 5 shelves per bay (additional shelves may be available at extra cost) Condition: good Available: immediately, delivery time approx. 2 weeks Location: Warehouse Frankenberg / Saxony

Condition: used, Pallet rack, heavy-duty rack, high rack, boltless rack, storage rack uprights, single supports, stiffening profile, shelf plates, shelf boards, shelf boards -Storage rack: steel shelf stands and wooden shelves in various sizes -Shelf stands: dimensions 1990 x 500 mm 35 pieces / 2992 x 500 mm 5 pieces -Shelf stands: dimensions 2996 x 600 mm 48 pieces / 1990 x 600 mm 37 pieces -Shelves: 1000 x 500 mm 320 pcs. / 1000 x 600 mm 909 pcs. -Price: per stand 10.- Euro / per floor 5.- Euro Ccagmdbjvs -Weight: Stands 5.4 to 8.4 kg/piece / Shelves 5.6/6.3 kg/piece

Condition: good (used), No. 1 metal rack Ucrhsprvst No. 4 drying racks / No. 1 fixed wall-mounted drying rack No. 2 wheeled fire extinguishers, year of manufacture 2023 No. 8 portable fire extinguishers, year of manufacture 2023

Condition: good (used), Functionality: fully functional, Machine/vehicle number: ZB341020, Total length: 994 mm, Total width: 400 mm, Total height: 40 mm, Load capacity per storage section: 200 kg, NOT FOUND THE RIGHT ONE YET? Visit our website, here you have a quick overview of many offers & variations of the articles! 120 shelves for SSI Schäfer R3000 shelving rack, 200kg load capacity, ZB341020, second-hand goods Data : - Length: approx. 940 mm - Depth: approx. 400 mm - Height: approx. 40 mm - Shelf load: 200 kg, with evenly distributed load - Used goods SSI Schäfer R3000 - ex stock Wietmarschen Price : 360,00 € net 428,40 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs for this depend on the zip code Uauyjijwjh Our recommendation : Let us know what you need... We are happy to help you with the realization of your projects, from planning to ordering and installation. If you are interested, please contact us by telephone, you will find our telephone number on our company page.

Condition: good (used), Functionality: fully functional, Supplied with 4 shelves as standard. One of which is anchored into the leg bracket see photo 1 FOR SALE Metal shelves - very good condition- Offer I am selling metal shelving racks. The shelves are used but in very good condition. Dimensions: - shelf width 125 cm, depth 45 cm, - height of the rear rack 215 cm, front 180 cm. Shelf parameters: - load capacity of one shelf 200 kg, 4 shelves above each other as standard, - complete elements = racks, shelves, shelf brackets, rear cover plates, reinforcing bars - modular system - any width can be assembled (in 1.25 m increments), double-sided shelving is also possible - screwless - the shelf elements are screwed together, - self-supporting - not anchored to the wall, - material - structural galvanized steel + paint, - manufacturer - Germany (Linde) - colour white (RAL 7035) The picture shows a shelf with a width of 3.75 m (3 sections x 1.25 m). Price: SINGLE SECTION 1,25 m shelf - 2300 CZK SINGLE SIDES RACK 2,5 m - 3950 CZK SINGLE SECTION REGISTER 3,75 M - 5550 CZK SINGLE DRAWER 5 M - 7200 Kč Dpn3Aj Additional one-sided module (1.25 m) - 1625 Kč DIVIDED SIDES MODULE 1,25 M - 4000 Kč 2.5 M WALL MODULE - 6800 Kč MODULE 3,75 M - 9750 Kč MODULE HUGE 5 M - 12600 Kč Additional double-sided module (1,25 m) - 3000 CZK Shipping: - personal collection in the village Moravec (near Velky Mezirici near D1) - possibility of sending the rack on a pallet.

Condition: like new (used), Year of construction: 2022, Cantilever rack used: screw system in hot-dip galvanized finish Scope of delivery: 4 shelf uprights height 3.500 mm with foot part 1.200 mm effective depth 12 cantilever arms with 1.200 mm effective depth, standard Including longitudinal and diagonal bracing for 1,300 mm spacing Fastening material (bolts, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 3.500 mm - Load capacity per upright 2.250 kg - Base and cantilever arms with 1.200 mm useful depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Technical advice by telephone Icqpoj3Rz - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.

Condition: new, Load Weight Shelf 14000 kg Bh0M0J3Zrx Loading weight per level 2000 kg Number of load levels 7 Stk. Recommended material length 6000 mm Column width 3000 mm Shelf height 2440 mm dimensions 3,8 x 0,9(1,35) x 2,45 m

Condition: used, Pallet rack, heavy-duty rack, high rack, boltless rack, storage rack stand -Pallet rack: boltless rack, heavy-duty rack with storage shelves H/W/D 2500/2750/860 mm -4 levels: compartment height: adjustable -Stand: 2 pieces 2505/850/100(base plate) mm -Cross braces: 8 pieces 2750/60/300 mm Dpppyr -Shelves: 4 pieces 2635/860/35 mm -Price: complete -Transport dimensions: 2670/980/H300 mm -Total weight: 409 kg

Condition: good (used), Functionality: fully functional, Machine/vehicle number: ZB4423, Total length: 994 mm, Total width: 400 mm, Total height: 30 mm, Load capacity per storage section: 200 kg, NOT FOUND THE RIGHT ONE YET? Visit our website, here you have a quick overview of many offers & variations of the articles! 150 shelves for SSI Schäfer R3000 shelving rack, 200kg load capacity, ZB4423, second-hand goods Data : - Length: approx. 940 mm - Depth: approx. 400 mm - Height: approx. 30 mm - Shelf load: 200 kg, with evenly distributed load - Used goods SSI Schäfer R3000 Fzjbd90 - ex stock Wietmarschen Price : 450,00 € net 535,50 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs for this depend on the postal code Our recommendation : Let us know what you need... We are happy to help you with the realization of your projects, from planning to ordering and installation. If you are interested, please contact us by telephone, you will find our telephone number on our company page.

Condition: like new (used), Year of construction: 2022, Cantilever rack used: screw system in hot-dip galvanized finish Scope of delivery: 4 shelf uprights height 2.600 mm with foot part 1.000 mm effective depth 12 cantilever arms with 1,000 mm effective depth, standard Including longitudinal and diagonal bracing for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 2.600 mm - Load capacity per upright 1.800 kg - Base and cantilever arms with 1.000 mm useful depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing E2Jjtua - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Technical advice by telephone - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.

Condition: new, Load Weight Shelf 12000 kg Dwtxv3 Loading weight per level 2000 kg Number of load levels 6 Stk. Recommended material length 3000 mm Column width 1500 mm Shelf height 2440 mm dimensions 2,3 x 0,9(1,35) x 2,45 m

Condition: used, Year of construction: 2013, Pallet racking, heavy duty racking, high racking, plug-in racking, storage rack stand, pallet rack -Pallet rack with storage shelves: 2 bays H/W/D 6000/5500/1100 mm -4 levels: compartment height: adjustable -Compartment load: 3000 kg / bay load 12000 kg Raqj38Afad -Accessories: incl. shelves, see photos -Total weight: 840 kg

Condition: new, Year of construction: 2021, Mesh shelf/support shelves for pallet racking Data: - 3-part, galvanized, for 270 x 110 cm shelf ( 99 € net ) - 4-part, galvanized, for 360 x 110 cm shelf ( 132 € net ) - New from stock - Load capacity: 1000 kg per grid, with evenly distributed load -MULTIPLE AVAILABLE! Price: 99,00 € net + legally valid VAT. Uaraeykcq7 You will receive an invoice with VAT shown. Our recommendation: Let us know what you need... We will be happy to help you realize your projects, from planning and ordering to installation. Delivery is available on request at a reasonable price.

Condition: like new (used), Year of construction: 2022, Cantilever rack used: screw system in hot-dip galvanized finish Scope of delivery: 4 shelf uprights height 3.000 mm with foot part 1.200 mm effective depth 12 cantilever arms with 1,200 mm effective depth, standard Including longitudinal and diagonal bracing for 1,300 mm spacing Fastening material (bolts, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 3.000 mm - Load capacity per upright 2.250 kg - Base and cantilever arms with 1.200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Technical advice by telephone - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. B8Vvxohvd0 In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.

Condition: new, Load Weight Shelf 20000 kg Loading weight per level 2000 kg Number of load levels 2 x 5 Stk. Recommended material length 6000 mm Csc7A878 Column width 3000 mm Shelf height 2440 mm dimensions m

Condition: like new (used), Year of construction: 2022, Cantilever rack used: screw system in hot-dip galvanized finish Scope of delivery: 4 shelf uprights height 4,160 mm with foot section 1,200 mm effective depth 12 cantilever arms with 1,200 mm effective depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4.160 mm - Load capacity per upright 2.250 kg - Base and cantilever arms with 1.200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm Yqd0Qpp - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Technical advice by telephone - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.

Condition: new, Load Weight Shelf 24000 kg Loading weight per level 2000 kg Nwz0F Number of load levels 2 x 6 Stk. Recommended material length 3000 mm Column width 1500 mm Shelf height 2440 mm dimensions m

Condition: like new (used), Year of construction: 2022, Cantilever rack used: screw system in hot-dip galvanized finish Scope of delivery: 4 shelf uprights height 3.000 mm with foot part 1.200 mm effective depth 12 cantilever arms with 1,200 mm effective depth, standard Including longitudinal and diagonal bracing for 1,300 mm spacing Fastening material (bolts, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 3.000 mm - Load capacity per upright 2.250 kg - Base and cantilever arms with 1.200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Technical advice by telephone - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. B8V7I2Abol The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.

Condition: new, Load Weight Shelf 6600 kg Hvm7Jsh Loading weight per level 1100 kg Number of load levels 6 Stk. Recommended material length 6000 mm Column width 2 x 2000 mm Shelf height 2440 mm Compartment width 800mm mm

Condition: like new (used), Year of construction: 2022, Cantilever rack used: screw system in hot-dip galvanized finish Scope of delivery: 4 shelf uprights height 3.500 mm with foot part 1.200 mm effective depth 12 cantilever arms with 1.200 mm effective depth, standard Including longitudinal and diagonal bracing for 1,300 mm spacing Fastening material (bolts, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 3.500 mm - Load capacity per upright 2.250 kg - Base and cantilever arms with 1.200 mm useful depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Technical advice by telephone - Made in Germany 072Mnahg - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.

Condition: new, Load Weight Shelf 12000 kg Loading weight per level 2000 kg Number of load levels 6 Stk. Recommended material length 6000 mm Column width 3000 mm Shelf height 2440 mm Doh7Dwt7W dimensions 3,8 x 0,9(1,35) x 2,45 m

Condition: like new (used), Year of construction: 2022, Cantilever rack used: screw system in hot-dip galvanized finish Scope of delivery: 4 shelf uprights height 2.600 mm with foot part 1.000 mm effective depth 12 cantilever arms with 1,000 mm effective depth, standard Including longitudinal and diagonal bracing for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 2.600 mm - Load capacity per upright 1.800 kg - Base and cantilever arms with 1.000 mm useful depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard 8Mf2Ym029V - Technical advice by telephone - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.

Condition: new, Load Weight Shelf 14000 kg Loading weight per level 2000 kg Number of load levels 7 Stk. Hsnrrj7 Recommended material length 3000 mm Column width 1500 mm Shelf height 2440 mm dimensions 2,3 x 0,9(1,35) x 2,45 m

Condition: new, Load Weight Shelf 30000 kg Bh0M7Jir0B Loading weight per level 3000 kg Number of load levels 2 x 5 Stk. Recommended material length 6000 mm Column width 3000 mm Shelf height 2440 mm dimensions m