Used Cavity Pump for sale (9,025)

Condition: excellent (used), Year of construction: 2008, The new powerful dry-running pumps: The ADH series is specially designed for solar developed for the demanding processes of the semiconductor and LED markets, With a suction capacity of 600-4500 m3/h. Semiconductors: High H2 pumping rate The performance of the ADH series brings the following advantages to the process: -ADL process performance: high pumping efficiency of light gases enables faster chamber emptying between process steps - Epitaxy and EUV: high pumping speed and high flow rate Tolerance meets the most demanding process specifications Adixen AD30K dry pump, high vacuum, AD 30 KL Manufacturer: Alcatel Adixen Type: AD30K.H Year of manufacture: 2008 Adixen AD100K.H Manufacturer: Alcatel Adixen Type: AD100K.H Year of manufacture: 2008 Vacuum pump: Manufacturer: AERZEN Type: GM 2000 CM-C Speed: 6000 rpm Voltage: 200-460 V Frequency (mineral oil/PFPE oil): 100 c/s Maximum suction capacity: 4035 m3/h Maximum speed: 5920 rpm Engine power S 1 / S 6: 9/5.6 kW Year of manufacture: 2008 Weight: 345 kg Dry pump: Manufacturer: Adixen Type: BF ADP122 Year of manufacture: 2008 Power 1.5 kW Maximum suction capacity: 95 m3/h Maximum continuous inlet pressure: 50 mbar Maximum exhaust pressure: 1200 mbar Cooling water: 60 l/h Speed ​​(pump): 3000-3600 rpm Operating temperature of the pump: from 5 °C to 40 °C Hjdjikq Tyspfx Aftofl Inlet flange: DN 50 ISO-KF Exhaust flange: DN 40

Year of construction: 2011, condition: used, Hydronic system, hydraulic station, membrane expansion vessel, compressed air tank, pressure vessel, pressure tank, compressed air tank, pressure tank, -Content: ltr -Connection: 2 "inches Hfjdpfxjd Duu Te Aftjl -permissible operating pressure: 1.5 bar -centrifugal pump -Manufacturer: EBARA type DWC-V300/1.1 -Dimensions cabinet: 650/800/H1350 mm -Weight: 104 kg

Year of construction: 2011, condition: used, Hydronic system, hydraulic station, membrane expansion vessel, compressed air tank, pressure vessel, pressure tank, compressed air tank, pressure tank, -electric heating -Manufacturer: Schniewindt -Type: 97/DF 15 -Power: 15 kW -Connection: DN30 in stainless steel Hfodpfxed Dvgpj Aftsl -permissible operating pressure: -centrifugal pump -Manufacturer: Tamel 2.2 kW -Number: 2x systems available -Price: per piece -Dimensions cabinet: 940/740/H1870 mm -Weight: 406 kg

Condition: good (used), Stainless impeller and housing Manufacturer: STORK Pumpen Hjdpsn R D Tksfx Aftsfl Type: FRER 80-140 Overall dimensions: 1000 x 400 x 550 mm Throat sizes: DN80; DN80 Voltage: 400 V Electrical power: 5,5 kW

Condition: new, Year of construction: 2025, Efficient Substantial energy savings compared to conventional vacuum generators, minimized operating costs Nearly maintenance-free Dry and contact-free operation Nominal pumping speed 245 / 290 m³/h (50 / 60 Hz) Ultimate pressure 100 hPa (mbar) (50 / 60 Hz) Ultimate pressure (continuous operation) 200 hPa (mbar) (50 / 60 Hz) Nominal motor rating 5.1 / 6.8 kW (50 / 60 Hz) Nominal motor speed 3000 / 3600 min⁻¹ (50 / 60 Hz) Noise level (ISO 2151) 75 / 79 dB(A) (50 / 60 Hz) Hjdpfotu H Eijx Aftofl Weight approx. 240 / 290 kg (50 / 60 Hz) Dimensions (L x W x H) 1090 x 515 x 450 mm (50 / 60 Hz) 1065 x 515 x 450 mm (50 / 60 Hz) Gas inlet / outlet G 2" / R 1"

Condition: like new (used), Year of construction: 2023, Inotec I225-iT5-160D Emulsifier Hfjdezwkv Uspfx Aftel INOTEC emulsifiers are used for the production of fine minces in the meat industry and for the production of fine emulsions of meat, vegetables, and fruits for baby food and hospital food, for confectionery, for the production of processed and analogue cheese products, and for pet food. Manufacturer: Inotec Model: I225-iT5-160D Year: 2023 Capacity: 15,000 kg/hour (depending on the product) Hole plate diameter: 225 mm Power: 400V / 50Hz / 180kW Machine dimensions (LxWxH): 2,000 x 1,300 x 1,800 mm Machine weight: 2,000 kg. Inotec IFP 15 Product Pump Manufacturer: Inotec Model: IFP 15 Year: 2018 Power: 400V / 50Hz / 20kW Machine dimensions (LxWxH): 3,000 x 1,900 x 1,620 mm Machine weight: 2,000 kg.

Condition: used, Hydraulic unit with 3 PARKER hydraulic pumps Hydraulic unit Year of construction: 2012 ----- Dual hydraulic pump, axial piston pump PARKER with 90 kW drive motor Type (Pump 1): PV180R1K4KJNMMZ Serial No.: 20921237 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement volume: VG max. = 180 cm³ / revolution Flow rate: approx. 260 liters/min. at 1480 rpm (calculated value) Maximum speed: 2200 rpm - Pressure regulator PARKER Type PVCMEMZN1 Type (Pump 2): PV046R1L1T1NM Serial No.: 20920701 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement volume: VG max. = 46 cm³ / revolution Flow rate: approx. 68 liters/min. at 1480 rpm (calculated value) Maximum speed: 2800 rpm - Pressure regulator PARKER Type PVCMAM1N1 Motor speed: 1480 rpm Motor power: 90 kW ----- Hydraulic pump, axial piston pump PARKER with 11 kW drive motor Type: PV016R1K1T1NMM1 Serial No.: 20764606 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement volume: VG max. = 16 cm³ / revolution Hfjdpfxozqglls Aftol Flow rate: approx. 23 liters/min. at 1440 rpm (calculated value) Maximum speed: 3000 rpm - Pressure regulator PARKER Type PVCMAM1N1 Motor speed: 1440 rpm Motor power: 11 kW ----- Hydraulic pump, vane pump PARKER/DENISON with 7.5 kW drive motor Type: T6CC 020 020 1R00 C1W1 Series: 11F29 431 Code: Displacement volume: VG max. = 16 cm³ / revolution - Pressure regulator PARKER Type PVCMAM1N1 Motor speed: 1450 rpm Motor power: 7.5 kW ----- Power connection: 400 Volt, 50 Hz - Dual hydraulic pump, axial piston pump PARKER with 90 kW drive motor - Type (Pump 1): PV180R1K4KJNMMZ, Type (Pump 2): PV046R1L1T1NM - Hydraulic pump, axial piston pump PARKER, Type PV016R1K1T1NMM1 with 11 kW drive motor - 1 hydraulic pump, vane pump PARKER/DENISON, Type: T6CC 020 020 1R00 C1W1 with 7.5 kW drive motor - 2 pressure accumulators PARKER, Type AP180EM050H2K and A4ES0578H2KRF - 1 temperature sensor SAMSON, Type 2750 - 1 hydraulic pressure filter WICKERT, Type W 503 909- 420 bar - 1 hydraulic pressure filter WICKERT, Type W 504 290- 420 bar - 1 hydraulic pressure filter WICKERT, Type W 505 603- 420 bar - 2 return filters WICKERT, Type W 503851 / W503995 - 1 water-oil cooler HYDAC, Type Hex S615-60-00/G1" - 3 cleaning covers Ø 380 mm - 1 oil level gauge - Tank dimensions L x W x H 2600 x 1700 x 800 mm - Filling capacity / tank volume: 2100 liters (sold without oil content) Overall dimensions with attachments L x W x H 2700 x 2250 x 2840 mm Weight: 3500 kg very good condition

Condition: new, functionality: fully functional, power: 85 kW (115.57 HP), empty load weight: 2,200 kg, fuel tank capacity: 200 l, TECHNICAL DETAILS Engine type: Diesel-hydraulic Engine: Deutz TCD 3.6 L4 Hedpeznmplofx Aftsfl Emission standard: China IV / Stage IV Rated power: 85 kW (115 hp) Fuel tank: 200 l MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,800 x 1,400 x 1,600 mm Weight: 2,200 kg EQUIPMENT Remote control Multiple cylinder blocks Hydraulic unit: External Connections for variable displacement pumps: 2 units, manually adjustable Connections for large gear pumps: 2 units, adjustable via engine speed Connection for small gear pump: 1 unit, adjustable via engine speed

Condition: excellent (used), functionality: fully functional, MAAG EXTREX 56 melt pump station with Kreyenborg K-SWE 101 screen changer Complete melt pump station consisting of a MAAG EXTREX 56 melt pump and a Kreyenborg K-SWE 101 twin-piston screen changer. The system has already been mechanically adapted, mounted on a common base frame, and is ready for immediate use. Scope of delivery: * MAAG EXTREX 56 melt pump * Drive unit including gearbox, cardan shaft, and motor * Complete heating system for the melt pump * Kreyenborg K-SWE 101 twin-piston screen changer * Hydraulic unit * Manual switching via hand valve * Heating system for the screen changer * Completely mounted on a base frame * Connection box Hsdpfx Afozpw Saotefl The system can be inspected and tested at our facility in Wuppertal at any time. On request, demonstrations or video calls are also possible. In addition, we have other melt pumps, screen changers, and various peripheral devices for extrusion systems in stock. We will gladly put together a suitable solution for you, tailored to your application.

Condition: used, Lubrication pump, oil pump for central lubrication, lubrication unit Central lubrication pump, oil pump for central lubrication, hydraulic pump, oil central lubrication pump Manufacturer: BEKA Schmiertechnik / Baier & Köppel, Pegnitz Type E-812 / ES0.5 Year of manufacture: approx. 1990 Flow rate: 0.4 l/min Operating pressure: 15 bar Tank capacity: approx. 3 liters Motor power: 0.09 kW Motor speed: 2730 rpm Hfsdpfx Aezpbq Hjftjl Current consumption: 0.4 A Power supply: 400 Volt, 50 Hz Dimensions L x W x H: 280 x 150 x 380 mm Weight: 8.5 kg Good condition 2 units available Price stated per unit

Condition: reconditioned (used), Year of construction: 2016, Technical specifications: Hjdpfszvrniox Aftefl Product number V-VC 150 Year of manufacture 2016 Engine power 3 kW Capacity 150 m3/h Maximum vacuum 1.1 mbar Noise level 74 dB Rotational speed 1500 rpm Weight 90 kg Dimensions [h x l x w] 7011 x 281 x 310 mm The pump achieves a vacuum of 1.1 mbar, as confirmed by the measurement on the sensor in the video attached below. After oil service New oil New exhaust separators Oil-sealed vacuum pump, suction – a device used in technology to remove gases (create a vacuum) in a closed space. Pumps are divided according to their operating principle into: volumetric, flow, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters of vacuum pumps are: final pressure (the lowest pressure that can be achieved with a given pump), pumping speed and its dependence on pressure, capacity (usually measured in m3 of gas pumped per unit of time).

Year of construction: 2018, operating hours: 10 h, condition: good (used), functionality: fully functional, Subject: RZ125-315 pump with diffuser, impeller for water with blades - Pump operating parameters: Q = 80-150 m³/h H = 14.7-12.5 m - Material: cast iron, grade ŻL250 - Sealing: rope seal - With 3SIE160L-6 motor, 11 kW, 960 rpm, 400V Hodpfxsztxvns Aftofl 2. Quantity: 2 pcs.

Condition: used, Machine: Impeller Pumpe Hfsdszx Df Espfx Aftsl

Condition: used, Pump, Wilo IPL50/175-7.5/2; 7.5 kW; Used machine Manufacturer: Wilo Type: IPL50/175-7.5/2 Overall dimensions: Width: 270 mm Depth: 380 mm Height: 670 mm Electrical data: 400V; 13.6 A; 7.5 kW Maximum pressure: 10 bar Fluid temperature range: −20 °C … +120 °C Maximum flow rate: approx. 69 m³/h Maximum delivery head: approx. 38 m Hfsdpfey Ezb Tex Aftjl

Condition: used, Year of construction: 1999, functionality: unexamined, volume flow: 200 m³/h, input voltage: 400 V, input frequency: 50 Hz, type of cooling: air, PVR Vacuum Pump Type PVL 200 Capacity 200 m³/h Absolute pressure 0.5 mbar Hsdpozwva Sefx Aftefl Year of manufacture 1999 Price €3,000

Condition: excellent (used), mileage: 8,57,293 km, power: 228 kW (309.99 HP), first registration: 10/2002, fuel type: diesel, tire size: 315/80 R22.5, axle configuration: 6x2, wheelbase: 4,250 mm, fuel: diesel, fuel tank capacity: 480 l, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro3, suspension: air, number of seats: 2, total length: 8,950 mm, total width: 2,480 mm, total height: 3,100 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2002, Equipment: cruise control, electric window regulation, fog lights, power mirror, seat heater, = Additional options and accessories = - Front View Camera - Handlebar adjustable in height - Radio CD player - Refridgerator - Steering Axle - Work lamp(s) = Remarks = Superstructure Construction year: 2002 Volume: 19 m3 Material: Aluminium = More information = General information Number of doors: 2 Cab: single Registration number: BZ-XN-21 Technical information Number of cylinders: 6 Engine capacity: 11.967 cc Drivetrain Make of engine: MAN Axle configuration Tyre size: 315/80 R22.5 Brakes: disc brakes Front axle: Max. axle load: 7500 kg; Steering; Tyre profile left: 70%; Tyre profile right: 70% Rear axle 1: Double wheels; Max. axle load: 11500 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Suspension: air suspension Rear axle 2: Lift axle; Max. axle load: 7500 kg; Steering; Tyre profile left: 40%; Tyre profile right: 40%; Suspension: air suspension Weights Empty weight: 8.875 kg Carrying capacity: 17.125 kg GVW: 26.000 kg Functional Make of bodywork: LAG Trailers NV Maintenance APK (MOT): tested until 07/2027 Condition Technical condition: very good Visual appearance: very good Number of keys: 1 = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Hfedpfozxcgnox Aftol Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Condition: used, Year of construction: 1996, 1 unit - Model: F 80-210/014 UG-158, 1.3 kW, 1,400 rpm, Capacity: 0.3-14 L/s, delivery head: 4.4 – 0.9 m, year of manufacture: 1995 Hjdpfx Afozr H Rqetsfl 1 unit - Model: F 100-210/024 YG-190, 2.4 kW, 1,450 rpm, Capacity: 0.3-35 L/s, delivery head: 8.5 – 1.5 m, year of manufacture: 1996

Condition: used, 1 unit – Model LPHY 60520, with 37 kW electric motor Hfjdpfezr H R Rex Aftsl 1 unit – Model Z8220 KK

Condition: used, Edwards Maglev turbomolecular pump, model STP XA4503C (serial number moz9430) + SCU1500 Controller. Fully tested. Hfedpfxeztblxj Aftel

Condition: used, Tool sharpening machine with coolant pump. Once the correct grinding angle has been set, the tool is ground using a manual/linear feed. Hfsdpfjzrx Ihsx Aftol Technical data: - Tool shank: 35 mm - Clamping length: 65 mm

Condition: used, mileage: 1,40,728 km, power: 294 kW (399.73 HP), first registration: 06/2015, tire size: 13R22.5, axle configuration: 8x4, wheelbase: 1,800 mm, color: white, gearing type: mechanical, number of gears: 16, emission class: euro6, suspension: steel, loading space length: 20 mm, Year of construction: 2015, Equipment: air conditioning, electric window regulation, Drivetrain Drive: Wheel Make of engine: MAN Axle configuration Tyre size: 13R22.5 Suspension: leaf suspension Axle 2: Steering Axle 3: Double wheels Axle 4: Double wheels Weights Empty weight: 20.500 kg Carrying capacity: 11.500 kg GVW: 32.000 kg = Additional options and accessories = - PTO Hfedswd Su Uepfx Aftjl

Condition: new, Sale, Lowara vertical pump/New Parameters : - Capacity max: - 39000L/h - 15000L/h. - Lifting height max: -93-38m - Motor power: 11 kW - Rotational speed: 2900 rpm Hodpfx Afoviyuujtsfl

Condition: excellent (used), I sell the pump FEZER 016-118 94213 - Pump in bdb condition. - Capacity 16m3/H Hedpsud Ryrsfx Aftofl

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, volume flow: 505 m³/h, power: 11 kW (14.96 HP), input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, warranty duration: 12 months, Roots vacuum pump . Available in stock. Completely overhauled pump. With warranty. Nominal flow: 505 m3 / h at 50Hz. Final vacuum: 4x10^-3 mbar abs. Hedpfxoftzihj Aftofl Any clarification, do not hesitate to contact us.

Condition: new, For sale: new, unused KSB Etachrom B industrial pump – complete, in original packaging, with manufacturer’s documentation. The pump is designed for industrial and process applications – high-quality workmanship, made in Germany. Hfjdpfeyhhqxjx Aftjl Technical data (from the nameplate): Manufacturer: KSB Series / Type: Etachrom B Flow rate (Q): 18.0 m³/h Head (H): 45.0 m Impeller diameter: Ø 181 mm Rotational speed: 2904 rpm Operating pressure: PN10 Medium viscosity: 1.0 mm²/s Year of manufacture: 2023 Made in Germany Certifications: CE, EAC, UKCA Condition New – ex stock Never commissioned Original box Operating/installation manual included Condition exactly as pictured Applications Industrial installations Process systems Cooling, process water Technical and production installations