Used Centrifugal Chemical Pump for sale (11,053)

Condition: like new (used), Technical data: Type: H65/4v Year: 2013 Flow rate: 24 m³/h Iodoxpiutepfx Adwsht Head: 15 m WC Power: 4 kW Speed: 2900 rpm Minimum back pressure: 2 m WC Manufacturer: FISCHER Maschinen- und Apparatebau AG, Austria Condition: The pump appears to be unused and comes from surplus stock of a closed factory. Due to its origin, we cannot guarantee that it is brand new. It is sold as seen in the photos.

Condition: like new (used), FISCHER Maschinen- und Apparatebau AG Type: H50/3v Serial No: 002664417-3 Year: 2013 Made in Austria Technical details: Flow rate: 25 m³/h Head: 15 m WS Power: 3 kW Iedpfsxpitvox Adwsht Speed: 2900 rpm Minimum back pressure: 1 m WS Condition: The pump appears unused and comes from the surplus stock of a factory closure. However, due to its origin, we cannot guarantee that it is brand new. Sold as is, as shown in the photos.

Condition: used, functionality: unexamined, machine/vehicle number: MTRE 15-9/5 | 10-10/10 | 5-10/10, Used Grundfos MGE112MC2 Centrifugal Water Pumps Manufacturer: Grundfos Various configurations: Pump MTRE 15-9/5 | Controller MGE112MC2 Pump MTRE 10-10/10 | Controller MGE132SD2 Pump MTRE 10-10/10 | Controller MGE112SB2 Pump MTRE 5-10/10 | Controller MGE1100LC2 Weight: varies from 42 to 74 kg. Ihodpfx Ajxphqtedwst Power: ranges from 4.0 to 7.5 kW Voltage: 50/60 Hz, 380-400 Volt.

Condition: good (used), High performance pumps, pump block for storage and retrieval of fuel oil, diesel, lubricants, oils, biodiesel, waste oil, frsich oil, ect.... Manufacturer: Pumps: Alfons Haar Hamburg Electric motors: Flender Capacity: 380 l/ min and 700 l/ min Iodpfx Adoiw Ehbjwsht The plant consists of 2 units with 3 pumps and electric motors each. Control cabinets are also included in the scope of delivery. Note: the electric motors are not sold separately ! Only serious and serious inquiries are answered under indication of: Name, e-mail address and telephone number answered.

Condition: new, Nominal rating l/h 2000 l/h Motor rating 0,37 (0,5) kW (PS) Iodpjb Nu Scsfx Adwsht Connected load 230V 50Hz (single-phase) Electrical protection 16 A Weight 14 kg Material 1.4301 / AISI 304 Pressure max. 1,5 bar / 15m Suction max. 0,5 bar / 5m Connection for juice inlet 1¼ " Connection for juice outlet 1¼ "

Year of construction: 1991, condition: excellent (used), functionality: fully functional, overall weight: 520 kg, Pump was operated on a test bench and has only run for very few operating hours. Flow rate: 400 m³/h ( 111 liters / second ) Delivery head / delivery pressure: 19 meters / 1.9 bar Pump speed: 1450 1/min NPSH required: 3.83 m Efficiency: 85.7% Shaft power: 24.04 kW Impeller diameter: reduced 264.5 mm (maximum Ø 269 mm) Shaft seal: single mechanical seal Manufacturer: Burgmann Impeller type: closed radial impeller Bearing type: roller bearing Iedpfx Aorfdttjdweht Lubrication type: Grease Materials of construction Pump casing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: 1.4462 Impeller: 1.4408 (AISI 316) Bearing bracket: Cast iron EN-GJL-250 Shaft sleeve: CrNiMo steel Nominal size of suction nozzle: DN 200 Discharge connection Nominal diameter: DN 150 Nominal pressure suction PN 16 Nominal pressure pressure PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH with intermediate sleeve Base plate: Painted gray cast iron Motor manufacturer: VEM Type: KPER 200 L4 Efficiency class: IE 0 Motor speed: 1435 1/min Frequency: 50 Hz Rated voltage: 380 / 660 V Rated motor power: P2: 30 kW Thermal class: F Motor protection class: IP54 Cosphi: 0.82 Dimensions: Length: 1600 mm Width: 650 mm Height: 820 mm Weight: 520 kg

Year of construction: 1991, condition: like new (used), overall weight: 1,420 kg, rotational speed (max.): 1,485 rpm, 3 stainless steel volute casing pumps in process design 2 x CPK-CM 250-315 built in 1991 1 x CPKN-C1 250-315 year of construction 2011 !!! Price per piece !!! Pumps were operated on a test bench and all have very few operating hours! See pictures !!! Flow rate: 1001 m³/h (278 liters / second) Delivery head / delivery pressure: 18 m / 1.8 bar Pump speed: 1485 1/min NPSH: 5.00 m Shaft seal: single mechanical seal with sealing water Manufacturer: Burgmann Impeller type: closed centrifugal impeller Impeller diameter: 324mm Bearing type: roller bearing Lubrication type: Oil Lubricant monitoring Oil level controller Materials: 1.4408 (AISI 316) Pump housing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: Heat-treated steel C45+N Impeller: 1.4408 (AISI 316) Bearing bracket lantern: Gray cast iron JL1040 Shaft sleeve: CrNiMo steel Nominal diameter of suction nozzle: DN 300 Discharge connection Nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure pressure side: PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH without intermediate sleeve Base plate: Painted gray cast iron Motor manufacturer: VEM K21R 280S4-Z Efficiency class: IE 0 Motor speed: 1480 1/min Frequency: 50 Hz Rated voltage: 400 / 690 V Ihodpfxeqabiae Adwet Rated motor power: P2: 75 kW Thermal class: F Motor protection class: IP55 Cosphi: 0.86 Dimensions: Length: 2120 mm Width: 950 mm Height: 1090 mm Weight: 1420 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, power: 4 kW (5.44 HP), 2 pieces magnetically coupled centrifugal pumps made of stainless steel. Last used for pumping caustic soda. Manufacturer: CP Pumpen AG (Switzerland) Type: MKP 20-15-160 Design: Monoblock with base plate Delivery rate: 5 m³/h (1.38 liters/second) Delivery head / Pressure: 21.1 meters (2.1 bar) Medium temperature: 35 - 40 °C Impeller Ø153 mm Speed: 2950 rpm Material casing and impeller: 1.4581 Including screws and connector for connection cable Motor: Siemens Type: 1LE10011BA222FA4 Power: 4 kW Voltage: 400 Volt Efficiency: IE2 Dimensions: Length: 590mm Width with temperature sensor: 440mm Iedpfowncv Rex Adwsht Width base plate: 330mm Height: 360 mm Weight: 81 kg Suction side: DN 20 Pressure side: DN 15

Year of construction: 2001, condition: good (used), 2 pieces axially split volute casing pumps with motor and base plate. Last application as turbine. !!! Map as pump and as turbine as pictures !!! Manufacturer: KSB Type: Omega 350-360 A Delivery rate: 1728 m³/h Delivery head: 32 m Speed: 1450 rpm Year of construction: 2001 For turbine operation Engine: VEM G21R 280 S4 Capacity: 75 kW at approx. 20 metres head and 1600m³/h Voltage: 400 V For pump operation: required shaft power: 177 kW required electric motor: 200 kW NPSH Value: 6.9 Ihodpfod Nqi Rex Adwjt Efficiency: 85.28%. maximum operating temperature: 140°C Speed sensor: Yes !! Price per piece !!

Year of construction: 1989, condition: good (used), Good condition, with connection for sealing water. Head : 86 meter / 8,6 bar Flow rate : 600 m³/h Rotation speed: 1450 rpm Isdpsc Iu Uiefx Adwjht Drive line: 190 Kw Can also be used as a turbine!

Year of construction: 1997, condition: refurbished (used), 2 pieces volute casing pump in process design 1 piece completely overhauled, new ball bearings for pump and motor. Mechanical seal overhauled by specialist company. All seals new. Flow rate: 6 m³/h Delivery head: 25 m Pump speed: 1440 1/min Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277mm Bearing type: roller bearing Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication type drive end oil Lubricant monitoring Oil level controller Materials: Pump housing: Duplex steel Noridur 1.4593 (9.4460) Wear plate: Duplex steel Noridur 1.4593 (9.4460) Pressure cover: Duplex steel Noridur 1.4593 (9.4460) Shaft: Heat-treated steel C45+N Impeller: Duplex steel Noridur 1.4593 (9.4460) Bearing bracket lantern: Cast iron EN-GJL-250 Shaft sleeve: Duplex steel 1.4462 Nominal size of suction nozzle: DN 80 Discharge connection Nominal diameter: DN 40 Nominal pressure suction PN 10 Nominal pressure pressure PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with intermediate sleeve Base plate: gray cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 1/min Frequency: 50 Hz Rated voltage: 400 V Rated motor power: P2 7.50 kW Thermal class: F Motor protection class: IP55 Cosphi: 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg The material 1.4593 Noridur is very well suited for - Chemical and process engineering industry - Sulphuric and phosphoric acid Ihodpfx Adsiuznujwjt - Salt extraction and processing - Petrochemical industry - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and extraction - Flue gas desulphurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Waste water treatment/sewage treatment plants - Offshore and marine technology

Condition: ready for operation (used), Power: 75kW, was used for milk products. Ijdpfoiwf Uusx Adwjht

Condition: used, Year of construction: 2004, power: 1.1 kW (1.50 HP), TECHNICAL SPECIFICATIONS - Type : HYGINOX SH-26 C - Year : 2004 - Max flow : 30 m3/h - 316L stainless steel for parts in contact with the product - 1,1 Kw - 1500 rpm - Connection: 2"1/2 - 2’ - SH-26 C: take 90 for dimension E from table in documentation Iedpfx Asv Ukx Uedwjht - Reference : 007132

Year of construction: 2014, condition: good (used), Inoxpa SE35 Centrifugal pump Iodpfx Aeqqhu Djdwoht Serial: 1192643A 2014, Stainless centrifugal pump, 180mm impeller diameter

Condition: new, Manufacturer: Grundfos Type: TP65-130/4 A-F-A-GQQE Model: A96087437 P2 03 32 0001 Delivery quantity: 29.5 m³/h Delivery head: 10.4 m Speed: 1,430 rpm Pressure: 16 bar Condition: unused Dimensions: 500 x 400 x 500 mm Iedpfx Adevvtg Dswoht Weight: 75 kg

Year of construction: 2006, condition: ready for operation (used), Flow rate: 20m³/h, delivery head: 41.5m, speed: 2925rpm, power at 50Hz: 5.5kW, 400V/690V, 10.3A/6A, power at 60Hz: 6.3kW, 460V, 10.1A, efficiency class: EFF2, weight: approx. 45kg. Ihsdpfx Asu Iztgsdwot

Condition: good (used), Wilo ILE50-170 Glanded centrifugal pump Glanded centrifugal pump, with built in frequency converter for electronic control for constant or variable pressure, 8.6Kw, two in stock Ihodpjw Dylnsfx Adwet

Condition: good (used), Wilo ILE80-190 Glanded centrifugal pump Glanded centrifugal pump, with built in frequency converter for electronic control for constant or variable pressure, 21Kw, two in stock Isdpew Dylhjfx Adweht

Condition: excellent (used), Grundfos pump. Type - CRE45-3 AN-F-A-E-HQQE 2,5" Iodpjii N E Ijfx Adwsht Capacity - 45m3/T. 11kW. Pmax/Tmax - 16/120 bar/gr. celcius. Is mounted with mge160mb2-ff300-f3 transmitter.

Year of construction: 2009, condition: used, For sale are 7 centrifugal pumps from Pumpenfabrik Wangen from 2009, model ESP. Three of the seven centrifugal pumps have a motor. Data on the pump: Number of pieces: 7 / 3 with motor Length: 226cm (with motor) height: 34cm Manufacturer: Pumpenfabrik Wangen Ihodpfxoga Dtye Adwjt Type: ESP No: 920615 Year of construction: 2009 connections: DN100 PN16 Motor data: Motor: SEW Eurodrive Type: RF77DV100L4/TF No.: 01.1280626601.0014.09 r/min: 1400/48 kW: 3/S1 V: 230/400 A: 11 / 6,30

Year of construction: 2009, condition: used, For sale are 8 centrifugal pumps from Pumpenfabrik Wangen from 2009, model ESP. Five of the eight centrifugal pumps have a motor. Number of pieces: 5 / 3 with motor Length: 172cm (without motor) / 229cm (with motor) Height: 34cm Manufacturer: Pumpenfabrik Wangen Type: ESP No.: 920607 Year of construction: 2009 Connections: DN100 PN16 Motor: SEW Eurodrive Type: RF77DV100L4/TF No.: 01.1280626601.0003.09 r/min: 1400/48 kW: 3/S1 V: 230/400 A: 11 / 6,30 Ihodpfx Ajga Dtcsdwjt

Condition: used, Rotary vane vacuum pump Manufacturer: Leybold Type: Trivac D25 BCS Cat. no.: 11879 Suction power: 25m³/h Ultimate pressure: approx. 0.005mbar Ihodpfx Adjbqnhgowet Motor: 400V Ds Please send us your pump request as an inquiry.

Condition: good (used), KSB Pump Etaline GN 080-210/404 G11 Inline pumps and three-phase standard motor with motor-mounted frequency converter for stepless speed adjustment. Areas of application: Heating systems Air conditioning systems Domestic hot water systems water supply systems industrial circulation systems Materials to be pumped Fluids that do not chemically or mechanically attack the pump materials. Operating data Q to see data sheet H to see data sheet For the data of this pump, please refer to the data sheet 1) The sum of inlet pressure and delivery head at zero flow must not exceed the specified exceed the specified value Isdpjiu U Txefx Adwoht Design Close-coupled pump in in-line design, with variable-speed standard motor, pump shaft and motor shaft are rigidly connected. Bearings Deep groove ball bearing grease lubricated. Shaft seal uncooled and maintenance-free mechanical seal according to EN 12 756 Pump series: Etaline Material combination: cast iron Standard motor and stub shaft Size designation: 80 Nominal width suction/ discharge 210 For further technical data, please refer to the data sheet. Item condition: used Scope of delivery: 1 x KSB pump Etaline GN 080-210/404 G11

Condition: good (used), KSB pump Etaline GN 050-160 / 074 G10 Inline pumps and three-phase standard motor with motor-mounted frequency converter for stepless speed adjustment. Applications: heating systems air conditioning Water systems water supply industrial circulation systems conveyed Liquids that do not attack the pump materials chemically and mechanically. operating data Q 17,50 m3 / h H 5.8 m Further data of this pump can be found in the data sheet 1) The sum of inlet pressure and delivery head in the zero point of quantity may be said to Do not exceed the value execution Block pump in inline design, with variable-speed standard motor, pump and motor shaft are rigidly connected. Ihjdpfxod Sqkzj Adwot camp Deep groove ball bearing grease lubricated. shaft seal uncooled and maintenance-free mechanical seal according to EN 12 756 Pump series: Etaline Material combination: gray cast iron Standard engine and stub shaft Size designation: 65 Nominal diameter suction / discharge connection 160 Further technical data can be found on the data sheet. Item condition: used Scope of supply: 1 x KSB pump Etaline GN 050-160 / 074 G10

Condition: ready for operation (used), coolant capacity 20 m3l/h Headroom 20 m operating pressure 2 bar voltage 380/660 V / 60 Hz motor type LA 3166 motor speed 1460 U/min Motor Capacity 15 kW weight 250 kg Ihsdpfxsui Tz Rj Adwst normal priming centrifugal pump, Housing and impeller made of stainless steel, Flange connections, Fabr. no. 22/00-125616