Used Centrifugal Water Pump 300 L Min for sale (84,061)

Year of construction: 1996, condition: good (used), machine/vehicle number: 96.01112.1496, Stationary high pressure pump unit Hammelmann HDP 112 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 112 Working pressure: 300 bar Delivery rate: 153 l/min. Drive speed: 1500 rpm. Drive power: 90 kW with VEM motor 90 kW 3~motor, IP55, with pressure regulating valve, with safety valve, with oil cooling system. dimensions LxWxH: ca. 2300x1000x1400 mm weight: approx. 1500 kg Year of manufacture: 1996 Hnjdpfx Ajhtnnisnvjn Condition: in good used condition.

Year of construction: 2012, condition: excellent (used), Stationary high pressure pump unit Hammelmann HDP 47 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 477 Working pressure: 300 bar Delivery rate: 24 l/min. Drive speed: 1500 rpm. Drive power: 14 kW with AC motors ACM 160L-4/HE 3~ IP55 15kW electric motor, Hnjdpfsh Uc Nkex Anvjn with pressure regulating valve, with safety valve, with oil cooling system. dimensions LxWxH: approx. 1.100x750x1.200 mm Weight: approx. 570 kg Year of manufacture: 2012 Condition: In very good used condition.

Year of construction: 2011, condition: excellent (used), machine/vehicle number: B1.01177.0824, Stationary high pressure pump unit Hammelmann HDP 177 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 177 Working pressure: 300 bar Delivery rate: 239 l/min. Drive speed: 1500 rpm. Driving power: 130 kW with VEM motor 132 kW 3~motor, IP55, with pressure regulating valve, with safety valve, with oil cooling system. dimensions LxWxH: approx. 2000x850x1400 mm weight: approx. 1500 kg year of construction: 2011 Condition: in very good used condition. Hnsdpfshtfynex Anvsn

Condition: excellent (used), Professional fire-fighting motor pump from the renowned German manufacturer Ziegler (Albert Ziegler GmbH). This device is designed for water transfer—ideal for fire departments, agriculture, construction sites, and industrial applications. Robust, compact build on a transport frame (can be transported with a forklift truck). The pump is in good technical condition and complete as shown in the photos. Technical data: - Manufacturer: Ziegler (Germany) - Model: TS 8/8 - Year of manufacture: 1992 - Output: 800 l/min Hsdpsy D An Sofx Anvjnn - Operating pressure: 8 bar - Speed: 4,400 rpm - Engine: petrol/gasoline - Operating hours: approx. 56 h - Weight: approx. 143 kg (ready for operation) - Standard: DIN 14410 / 14420 Condition: - Used - Normal signs of use - Technically flawless and fully operational Scope of delivery: - Ziegler motor pump - Firefighting couplings - Complete set as shown in the photos Additional information: - The price refers to 1 unit of the pump - Sold as shown in the pictures - Can be shipped on a pallet or collected in person

Condition: new, Year of construction: 2025, Vacuum mixer is designed for mixing crushed meat. Due to the freqency regulator to achieve speed control. The microprocessor control is by German company ADITEC. The working part is with spiral shape and paddles. TECHNICAL DETAILS: Hnodpfx Answq D Rbevjn MODEL BM 300 Working volume 300 L/ 220 kg Instaled Power 3 kW Shafts speed frequency regulator Kind of shafts paddle Unload front valve Power 380 V 50 Hz Air power 6 bar L x B x H 1310 x 920 x 1500 mm.

Condition: good (used), Code: 0098 Brand: MINIMAX SCM Model: LS 3000 - CE Standard Belt sanding machine with double goose neck - with 3 motors - CE Standard Table length mm 3000 Table width mm 1100 Automatic table lifting stroke mm 580 2-speeds belt motor Sanding belt lenght mm 8100 Hsdpfxoy Au Die Anvenn Pulleys diameter mm 250 Belt width mm 150 Manual pad mm 150 Gooseneck depth mm 820 Overall dimensions: mm 4150 x 1500 x 1600 h Weight kg 485

Condition: excellent (used), For sale: Professional fire pumps PFJ (PFJ Pumpen und Feuerlöschtechnik GmbH, Germany), model TS 8/8 DIN 14410. ⚙️ Technical Specifications: Model: TS 8/8 DIN 14410 Flow rate: 800 l/min Operating pressure: 8 bar Nominal speed: approx. 2725 rpm Year of manufacture: 2 units – 1993, 32 h, 98 h 1 unit – 1997, 164 h Weight: approx. 162 kg Manufacturer: PFJ GmbH Jöhstadt – Made in Germany 🔧 Technical Condition: Pumps are operational, start and run smoothly Normal signs of use (scratches, scuffs – visible in photos) Used equipment, but in good technical condition Complete as shown in the pictures 📦 Included: Petrol pump Control panel Lighting All components shown in the photos 💡 Applications: Fire brigade / Volunteer fire department Water drainage Hodpeyyxiwsfx Anvenn Industrial and construction works Fire protection systems ℹ️ Additional Information: Price is for 1 unit Possible to purchase the complete set Shipping available

Condition: ready for operation (used), Festo 559342 / EGSL-BS-75-300-20P mini slide, used, in good condition, 100% fully functional, delivery as shown in the photos. Hnodpfsx Erlpsx Anven

Condition: new, GMN TSA 26x200 L 100120 SP: 39300-40000 rpm grinding spindle, unused in opened original packaging, 100% functional, scope of delivery as per photos Hnedoi D U Udjpfx Anvjn

Condition: new, GMN TSA 26x200 L 122526 SP: 39300-40000 rpm grinding spindle, unused in opened original packaging, 100% functional, scope of delivery as per photos Hsdpfx Aei D U Uhsnvonn

Condition: new, GMN TSA 26x200 L 184039 SP: 39300-40000 rpm grinding spindle, unused in opened original packaging, 100% functional, scope of delivery as per photos Hnodpfx Anoi D U Ulovon

Condition: new, GMN TSA 26x200 L 199209 SP: 39300-40000 rpm grinding spindle, unused in opened original packaging, 100% functional, scope of delivery as per photos Hedpfx Anji D U Upsvonn

Condition: new, GMN TSAV 40x315 - 6002 L 253066 SP: 7900-13000 rpm grinding spindle, unused in opened original packaging, 100% functional, scope of delivery as per photos Hnedpfx Aji D U Uzsnvjn

Condition: new, driver cabin: other, gearing type: other, Vehicle location: in transit / arriving soon, Superstructure: Self-priming water pump, self-lubricating, equipped with a separate engine. Dirty water pump with KD350 C5 engine, air-cooled, max. delivery rate 1,800 liters/min (108 m³/h), pump head 17 m, protection class IP 23, self-priming. Impeller made of graphite cast iron, volute made of graphite, mechanical seal made of silicon carbide. Centrifugal pump designed for dewatering and drainage, suitable for handling highly contaminated media with particle sizes up to 20 mm. Standard equipment includes strainer, screw fittings, clamps, operation and maintenance manual. Weight: 90 kg. Technical data: - Max. delivery rate: 1,800 l/min (108 m³/h) - Max. suction head (m): 8 - Inlet diameter (mm): 100 - Outlet diameter (mm): 100 - Particle size (mm): 20 - Self-priming: yes - Approx. weight (kg): 90 Hedsi Rqr Topfx Anvsnn - Dimensions (L x W x H in mm): 715 x 570 x 590 - Engine type: 1-cylinder, 4-stroke, side valve - Engine: KOHLER KD350 C5 - Autonomy (h): 4.3 - Fuel: Diesel - Tank capacity (liters): 4.3 - Starting system: Recoil starter Price depends on size! Suitable water tanks: see-6112-, -6113- ACCESSORY DETAILS WITHOUT WARRANTY. Subject to change, prior sale, and errors excepted!

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Hnodpoua Tbwefx Anvjn Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: used, Pump, Centrifugal Pump, KSB Movitec VF 40/4 B,Vertical multistage centrifugal pump, Used equipment Manufacturer: KSB (Movitec series) Type: Movitec VF 40/4 B Hodpfx Anoy H Nbkevjnn Year of manufacture: 2018 Overall dimensions: 430 x 350 x 1310 mm Weight: 118 kg Electrical specifications: Power output: 15 kW (13.2 kW) Frequency: 50 Hz Rated speed (n fix): 2950 rpm Technical specifications: Flow rate / Head (Q/H): 38.7 m³/h / 84 m Efficiency (Eff.): 76% (MEI ≥ 0.70) Shaft seal type (Seal): Code 15 E Operating pressure/temperature (P/T): PN16, -20 / +120 °C Connection (Conn.): PN16/25 NW80 Description: High-performance industrial pump in vertical design.

Condition: good (used), Year of construction: 2020, Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station Hjdpfsywgxbjx Anvsnn -Hydraulic power unit: with hydraulic reservoir and control unit -Hydraulic pump: Pressure up to 100 bar -Flow rate: 6 l/min -Motor: 3 kW / 1410 rpm -Hydraulic tank/filter/valves: see pictures -Key switch: CNC Electric COB-62C -Dimensions: 470/450/H685 mm -Weight: 84 kg

Condition: used, maximum load weight: 1,115 kg, overall weight: 1,500 kg, axle configuration: 1 axle, first registration: 03/2026, loading space length: 3,010 mm, loading space width: 1,670 mm, loading space height: 161 mm, total width: 2,200 mm, total height: 1,185 mm, * Universal transporter by Pongratz, type L-PAT 300/16 G-K, vehicle transporter, gross weight: 1,500 kg, with loading ramp, low loader, overrun brake, and much more. Errors and prior sale excepted. Hnjdpfx Aoyn Uggsnven

Condition: used, Year of construction: 2000, machine/vehicle number: SO126, Used HDPE Extrusion Blow Molding Machine for 10 L – 300 bph – Overview Second-hand Uniloy Milacron HSM10/D extrusion blow molding machine designed for producing up to 10 L HDPE containers. With a single-parison head and robust clamp, this EBM unit is ideal for industrial packaging and beverage production auxiliaries (e.g., water canisters, edible oils) and can be integrated within a used bottling line. Documentation and manuals are available. Reference number: SO126. Technical Specifications & Performance Data Main data Make/Model: Uniloy Milacron HSM10/D Year: 2000 Technology: Extrusion Blow Molding (EBM), single parison Material: HDPE Number of cavities: 1 Max container volume: 10 L Indicative output: up to about 300 bph on 10 L (application-dependent) Manuals: included Ref. no.: SO126 Extruder Screw diameter: 100 mm; L/D 24 HDPE screw speed: 0–70 rpm Plasticizing capacity (HDPE): approx. 300 kg/h Main extruder motor: 89 kW Heating zones: 6; barrel heating power: 31.4 kW Motor cooling power: 0.58 kW; barrel cooling power: 1 kW Parison head Type: PE 1/200, single parison Max die diameter: 200 mm Head heating power: 14.2 kW Parison thickness control: hydraulic (wall-thickness programming) Clamp & blow unit Clamp force: 200 kN Max mould size: 650 × 500 mm (H) Mould thickness: 2 × 150 mm Mould opening stroke: 300 mm Horizontal carriage stroke: 660 mm Blow pin stroke: 240 ± 5 mm Blow pin thrust at 50 bar: 320 kg Electrical Installed power: 156 kW (average consumption ~104 kW) Supply: 400 V, 50 Hz, 318 A, 3 + N Hydraulic system Reservoir capacity: 400 l Pump flow (1470 rpm): 123 l/min Max pressure (main circuit): 190 bar Main hydraulic motor: 37 kW; oil cooling motor: 1.5 kW Pneumatics Operating pressure (general): 6–8 bar; air use: 2000–2500 Nl/min Post-cooling pressure: 6–8 bar; air use: 1000–1500 Nl/min Cooling water Mould circuit: 8–12 °C; flow 15 m³/h Extruder & hydraulic oil: 10–24 °C; flow 4 m³/h Dimensions & weights Approx. machine size (L × W × H): 7600 × 7700 × 3900 mm Blow unit weight: 7600 kg; Extrusion group weight: 6400 kg Noise level at operator: < 85 dB(A) Hodpfjyhbt Hjx Anvjnn Advanced Automation & Control Systems Hydraulic wall-thickness programming for precise parison control, improving weight distribution and top-load performance on 10 L containers. Dedicated Uniloy command and control software (version code available in manuals) with operator interface for setpoint management and diagnostics. Integrated temperature control across six extruder zones and heated head for stable processing at up to 300 °C transformation temperature. Interlocked guarding and emergency stops for safe operation. Production Line Integration Capabilities This second-hand extrusion blow molder is integration-ready for downstream equipment typical of a used bottling line and industrial packaging systems: Conveyor...

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic power unit: with hydraulic reservoir Hnjdpszcuw Iefx Anvjn -Hydraulic pump: Pressure up to 140 bar -Flow rate: 30 l/min -Motor: Lammers 1400 rpm -Hydraulic reservoir: with filter and temperature/level indicator -Individual components: see photos -Dimensions: 910/520/H970 mm -Weight: 225 kg

Condition: used, feed pressure / bar Hnedpozcgldofx Anven power capacity / kW liter capacity / l Wilo DPL80/130-3/2 DPL standard twin-head glanded pump

Condition: used, Pump, Centrifugal Pump, KSB Movitec VF 40/4 B,Vertical multistage centrifugal pump, Used equipment Manufacturer: KSB (Movitec series) Type: Movitec VF 40/4 B Year of manufacture: 2018 Overall dimensions: 430 x 350 x 1310 mm Weight: 118 kg Electrical specifications: Power output: 15 kW (13.2 kW) Frequency: 50 Hz Hedpfx Ansy Udbusvsnn Rated speed (n fix): 2950 rpm Technical specifications: Flow rate / Head (Q/H): 38.7 m³/h / 84 m Efficiency (Eff.): 76% (MEI ≥ 0.70) Shaft seal type (Seal): Code 15 E Operating pressure/temperature (P/T): PN16, -20 / +120 °C Connection (Conn.): PN16/25 NW80 Description: High-performance industrial pump in vertical design.

Condition: excellent (used), I will sell a DDR motor pump. - 800l/min - 28PS. - Very good condition. Hnedev Nrf Espfx Anvon

Condition: good (used), Item: D-7608-10APV-Pump ZMH3 Hedpehglryefx Anvonn APV - Centrifugal pumps Brand: APV On stock: 3 pcs. Type: ZMH3 (HP3) Engine: 18,5 kW Inlet/Outlet 4"-3,5"

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic power unit: with hydraulic reservoir -Hydraulic pump: Pressure up to 150 bar -Flow rate: 42 l/min -Motor: Lammers 4.0 kW / 1440 rpm Hnjdpfezbhdlsx Anvsn -Hydraulic reservoir: with filter and temperature/level indicator -Individual components: see photos -Dimensions: 630/520/H960 mm -Weight: 206 kg