Used Centrifugal Water Pump 300 L Min for sale (85,124)

Condition: used, Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump -Drive: 4 kW 960 rpm Bjdpfx Abectq Rdetjwt -Max. Delivery rate: 2.58 m³/h -Max. Pressure: 3 bar -Max. Temperature: °C -Dimensions: 730/350/H310 mm -Weight: 88 kg

Condition: good (used), Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump -Drive: 1.5 kW 2910 rpm Bwsdpodzrykofx Abtst -Max. flow rate: 23.6 m³/h -Max. pressure: bar Maximum temperature: 100 °C Quantity: 1 piece available -Dimensions: 250/300/H755 mm -Weight: 60 kg

Year of construction: 2012, condition: excellent (used), machine/vehicle number: B2.01127.1899, Stationary high-pressure pump unit, Hammelmann HDP 127, mounted on a base frame. Similar to, but not a Kamat, Uraca, or Woma. Pump type: HDP 127 Operating pressure: 650 bar Flow rate: 72 l/min Drive speed: 1500 rpm Drive power: 87 kW with EMK KAE2G280M-4B3E3K electric motor, 90 kW, IP55, IE3 with pressure regulating valve, with safety valve, with oil cooling system. Bwedpfsix I H Ujx Abtst Dimensions (L x W x H): approx. 1,700 x 850 x 1,350 mm Weight: approx. 1,200 kg Year of manufacture: 2012 Condition: In very good used condition.

Condition: good (used), Centrifugal pump, water pump, stainless steel pump, food pump, peripheral wheel pump -Manufacturer: SAWA-Schmidhauser, centrifugal pump peripheral wheel pump Bodpfspg N Szox Abtswt -Type: F30/50 -Motor: Fig 1.50 kW / 2850 rpm -Dimensions: 480/210/H190 mm -Weight: 30 kg

Condition: excellent (used), functionality: fully functional, volume flow: 163 m³/h, input frequency: 50 Hz, NB 80-160/147-127 A-F2-A-E-BAQE Non-self-priming, single-stage centrifugal spiral pump Bsdpferp Ef Eox Abtswt Pumped liquid: water Liquid temperature range: 0 .. 120 °C Density: 998.2 kg/m³ Technical: Speed: 2940 rpm Nominal volume flow: 163 m³/h Nominal head height: 17.1 m Actual diameter of the impeller: 147-127 mm Nominal diameter of the impeller: 160 mm Primary shaft seal: BAQE Maximum ambient temperature: 60 °C Maximum operating pressure: 16 bar Flange standard: EN 1092-2 Pump inlet: DN 100 Pump outlet: DN 80 Pressure limit: PN 16 Nominal power 11 kW Mains frequency: 50 Hz Nominal voltage: 380V 3 phases Nominal current: 20.6 weight: 162 kg ​

Condition: used, centrifugal pump, water pump -Flow rate: 88 m³/h -Max. H: 50mWs -Motor power: 18.5 kW -Speed: 2935 rpm -Inlet pipe connection: DN 65 -Pipe connection outlet: DN 50 -Number: 1x pumps available Bwjdpfxocnz E Ho Abtot -Price per piece -Dimensions: 710/390/H365 mm -Weight: 164 kg

Condition: used, STERLING SIHI Industrial Centrifugal Pump with LEROY-SOMER Explosion-Proof (ATEX) Electric Motor (4.0 kW), Used Machine Overall Dimensions Width: 600 mm Depth: 300 mm Height: 360 mm Electric Motor Manufacturer: Moteurs Leroy-Somer (Angoulême, France) Model: 3~ FLSD112M Serial Number: 612051 RG001 Power Output: 4.0 kW Rated Speed: Approx. 2915–2920 RPM Explosion Protection (ATEX): II 2 G EEx d IIB T4 Protection Rating: IP55 Mechanical Protection: IK08 Bedpfx Abezg Uu Totjwt Pump Manufacturer: Sterling Fluid Systems / Sterling SIHI Model: ZLKD 032200 A4 BHJ 4B 4 112 ATEX Classification: II 2G c T1–T5

Condition: used, Year of construction: 2022, functionality: limited functionality, Complete, industrially manufactured water treatment system for ultra-pure, demineralized water, 400 l/h (< 3 µS/cm, depending on the raw water), delivered in December 2022. Multi-stage: raw water filter Berkofin KS25 HWS, compact demineralization ion exchanger BerkeSOFT midi 2-45, reverse osmosis Terion-S 500 with pressure pump/membrane modules, electrodeionization (CEDI), NaOH dosing for CO₂ removal, UVC sterilization Aquafides 1AF4+. 980-liter pure water storage tank with E+H Levelflex FMP51 and capacitive level sensors. Frequency inverter-controlled pressure boosting, 2 m³/h at 6 bar. High-quality industrial components (including KSB, Grundfos, Calpeda, WIKA, Bürkert, Balluff). Bwodszmap Nepfx Abtst Technical data: - Capacity 400 l/h, < 3 µS/cm; RO membrane set valid until 28.07.2025 (approx. 265 m³ treated) - UV lamp replaced on 01.10.2025 (approx. 5,350 operating hours); storage tank 980 l; pressure boosting 2 m³/h at 6 bar, frequency-controlled - Note: CEDI unit currently defective/clogged, capacity currently ~20 l/h; repair offer dated 24.09.2025 is available. Extensive documentation and manuals are available. More systems and equipment are continuously being offered for sale from a laboratory and pilot plant liquidation – inquiries are welcome. Sold on behalf of the customer through the Köck auction house. Located in eastern Austria, exact address upon request. Collection/dismantling by the buyer.

Year of construction: 2008, condition: excellent (used), Stationary high-pressure pump unit Hammelmann HDP 127 on a base frame. Similar to, but not a Kamat, Uraca, or Woma. Pump type: HDP 127 Bwodpeh Uc Iuofx Abtst Operating pressure: 600 bar Flow rate: 66 l/min Drive speed: 1500 rpm Drive power: 74 kW with SCHORCH KA7280S-BB01B-Z 3~ IP55 75kW electric motor, with pressure regulating valve, with safety valve, with oil cooling system. Dimensions L x W x H: approx. 1,700 x 1,000 x 1,300 mm Weight: approx. 1,300 kg Year of manufacture: 2008 Condition: In very good used condition.

Condition: excellent (used), Pressure centrifugal pump Vertical centrifugal pump Grundfos CR 90-3 A-F-A-E-EUBE more piece Vertical, multistage centrifugal pump with suction and discharge ports on the same level. The pump head and base are in cast iron - all other wetted parts are in stainless steel (EN 1.4301) Rated flow 90 m³/h Rated head 65.5 m Max pressure at stated temp 16 bar / 120 °C Type of connection DIN Size of inlet connection DN 100 Pumped liquid Water Liquid temperature range 0 .. 120 °C Selected liquid temperature 20 °C Density 998.2 kg/m³ Electrical data Motor type SIEMENS Rated power - P2 22 kW Bwsdpfjhy Nx Eex Abtst 2940 rpm Mains frequency 50 Hz Rated voltage 3 x 380-415D/660-690Y V Rated current 41,5-39,5/24,0-23,5 A Cos phi - power factor 0.86 Rated speed 2945 rpm Number of poles 2 Enclosure class (IEC 34-5) IP55

Condition: good (used), Item: LC-5839-40 - Self-Priming Pump SELF-PRIMING STAINLESS STEEL HYGIENIC PUMP – 2.2 KW Item: Self-Priming Hygienic Centrifugal Pump Motor: ASEA Motor Power: 2.2 kW Material: Stainless steel Condition: Used / Serviced Location: Denmark Used self-priming stainless steel hygienic pump, suitable for applications in the dairy, food, beverage, and general process industries. The pump is designed for applications where the pumped liquid may contain air or gas and where self-priming capability is required. This type of pump is commonly used for CIP return, tank emptying, and hygienic product transfer. Technical Information Self-priming centrifugal/liquid-ring pump Stainless steel construction Bwodpfx Abstrltdjtst Hygienic sanitary connections ASEA electric motor Motor power: 2.2 kW Motor has been reconditioned New seal fitted Additional new Alfa Laval spare/seal parts included Suitable for hygienic food-processing applications.

Year of construction: 2013, condition: excellent (used), machine/vehicle number: B3.00122.2279, Stationary high-pressure pump unit, Hammelmann HDP 122, mounted on a base frame. Similar to, but not a Kamat, Uraca, or Woma. Pump type: HDP 122 Operating pressure: 440 bar Flow rate: 92 l/min Drive speed: 1500 rpm Bsdpfjhf Ixmsx Abtswt Drive power: 75 kW with AC motor ACM 208S 75 kW, electric motor, IP55, with pressure regulating valve, with safety valve, with oil cooling system. Dimensions L x W x H: approx. 1,800 x 900 x 1,450 mm Weight: approx. 1,230 kg Year of manufacture: 2015 Condition: in very good used condition.

Condition: good (used), Year of construction: 2003, functionality: fully functional, 1.High-Speed Planer/Moulder WACO MAXI 8 spindles for horizontal splitting, feed speed 20-150 m/min Working width planing: 30-300 mm Working height planing: 10-150 mm Cutting circle- 180-260 mm Operating voltage: - 400 Volts, 50 Cycles Main feed motor - 37 kW Frequency concerter - 45 kW 1.Bottom head - 24,5 kW 2.Top head - 30 kW 3.Right side head - 18,5 kW 4.Left side head - 30 kW 5.Right side head -18,5 kW 6.Left side head - 24,5 kW Horizontal splitting: 7.Right side head - 53 kW 8.Left side head - 53 kW Max working width 200 mm Max working height 63 mm Max saw blade diameter 300 - 400 mm Spindle diameter 50 mm Vertical adjustability 10 mm Spindle speed 5.500 v/min Exhaust connection 2 x Æ 160 mm Unit lenght 1300 mm 2. High-Speed Planer/Moulder WACO MAXI 3 spindles for finishing, feed speed 30-300 m/min Main feed motor - 37 kW Frequency converter - 45 kW Feed speed, variable: 30-300 m/min Bsdpfxszc I Dbe Abtswt 1.Beading head: 24,5 kW 2.Top head 24,5 kW 3.Rotaplan head 30 kW

Condition: excellent (used), For sale is a Pumpen Distel type 50/200 centrifugal pump equipped with an 11 kW electric motor from Antriebstechnik G. Bauknecht AG. The pump is used and in working order. Visually, it is in good used condition and has normal signs of use and storage. The actual condition and completeness are shown in the photos. Technical data of the pump: Manufacturer: Pumpen Distel Type: 50/200 Serial No.: 78756 Flow rate Q: 40 m³/h Pressure: 4.5 bar Rotational speed: 2900 rpm Power: 11 kW Connections: flanged Technical data of the electric motor: Manufacturer: Antriebstechnik G. Bauknecht AG Type: RF 11/2-75 Power: 11 kW Voltage: 380 V Current: 22 A Frequency: 50 Hz Rotational speed: 2930 rpm cos φ: 0.88 Protection class: IP54 Insulation class: B Operating mode: S1 Mounting form: B3/B5 Condition: Bodpfxszvyw Eo Abtewt Used, in working order. Has normal signs of use and storage. Scope of sale: Complete centrifugal pump with an 11 kW electric motor – exactly as shown in the photos.

Condition: used, functionality: fully functional, mileage: 34,000 km, power: 161.81 kW (220.00 HP), axle configuration: 4x4, fuel: diesel, Year of construction: 1995, Equipment: additional headlights, all wheel drive, trailer coupling, Are you looking for a reliable and affordable emergency vehicle for your fire department? Then you have come to the right place! From our immediately available stock of used vehicles, we offer: Water Tank Firefighting Vehicle TLF 16/25 ALL-WHEEL DRIVE 4x4 Magirus on IVECO 135E22 The TLF 16/25 is the proven combination of the advantages of crew fire engines and water tank firefighting vehicles. With a squad crew and ample space for firefighting and rescue equipment, the vehicle is prepared for most operational scenarios. General Data: • Year of manufacture: 1995 • Mileage: approx. 34,000 km Chassis: • IVECO 135E22 4x4 with 220 HP (159 kW) • Diesel engine with manual transmission Cab: • Standard, spacious crew cab (1+5) in RAL 3000 (fire red) • Mounts for 2 self-contained breathing apparatus in the crew compartment Bodywork: • Manufacturer Magirus Eurofire • TLF 16/25 body according to DIN standards • Three large lateral equipment compartments each side • Extendable steps for the front side equipment compartments • Brackets for standard equipment load Bjdsxk T Efopfx Abtowt • Mounts for 2 additional breathing apparatus • Roof compartment Fire Pump / Water Tank: • Magirus FPN 1600-8 centrifugal fire pump • Capacity 1,600 l/min at 8 bar • Water tank 2,600 l Firefighting Equipment: • Fixed rapid action hose reel, 50 m, in upper compartment G6 Safety and Lighting: • 2 rotating beacons at the front and 1 at the rear • Pneumatic special signal system (Martin horn) • Rear-view camera • Hygiene board available on request We are happy to provide you with a specific offer and can present the vehicle to you in detail at our premises in Berlin. All information is provided to the best of our knowledge and belief, without guarantee of completeness or accuracy. This advertisement does not constitute an offer, but is for information purposes only. Subject to prior sale!

Condition: ready for operation (used), Year of construction: 2010, operating hours: 1,628 h, functionality: fully functional, machine/vehicle number: W09WOM125ADW76457, operating pressure: 2,800 bar, total length: 440 mm, total height: 205 mm, total width: 194 mm, empty load weight: 2,260 kg, fuel: diesel, overall weight: 2,700 kg, fuel tank capacity: 300 l, rotational speed (max.): 1,800 rpm, rotational speed (min.): 900 rpm, Equipment: chassis, Used water high-pressure unit WOMA Ecomaster MK3 250M (plunger Ø16mm) with DEUTZ TCD 2012 engine. Maximum working pressure: 2800 bar Maximum flow rate: 20 l/min Pump operating hours under pressure: 1077 h Engine operating hours: 1628 h Bodpfx Aoy Nmm Nsbtjwt Year of manufacture: 2010 Condition: very good – ready for work Used additional equipment: 2 x 20m UHP hose DN8 (3000 bar), 1 x 5m UHP hose DN5 (3200 bar), 1 x control cable, 1 x control cassette, 2 x UHP high-pressure guns (3000 bar), WOMA technical documentation, 2 x spare wheels Original WOMA superstructure. Regular maintenance carried out. Complete gearbox replacement under WOMA warranty in 2015 (relevant documents available). Trailer registered and paid (valid technical inspection).

Condition: used, Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Manufacturer: Forst-Enor, switching pump RSWV40 -Motor: AEG -Power: 4 kW Bwodpjfuw Naefx Abtet -Speed: 1420 rpm -Delivery rate: 40 l/min -Dimensions: 2000/455/H500 mm -Weight: 156 kg

Condition: used, Year of construction: 2000, machine/vehicle number: SO126, Used HDPE Extrusion Blow Molding Machine for 10 L – 300 bph – Overview Second-hand Uniloy Milacron HSM10/D extrusion blow molding machine designed for producing up to 10 L HDPE containers. With a single-parison head and robust clamp, this EBM unit is ideal for industrial packaging and beverage production auxiliaries (e.g., water canisters, edible oils) and can be integrated within a used bottling line. Documentation and manuals are available. Reference number: SO126. Technical Specifications & Performance Data Main data Make/Model: Uniloy Milacron HSM10/D Year: 2000 Technology: Extrusion Blow Molding (EBM), single parison Material: HDPE Number of cavities: 1 Max container volume: 10 L Indicative output: up to about 300 bph on 10 L (application-dependent) Manuals: included Ref. no.: SO126 Extruder Screw diameter: 100 mm; L/D 24 HDPE screw speed: 0–70 rpm Plasticizing capacity (HDPE): approx. 300 kg/h Main extruder motor: 89 kW Heating zones: 6; barrel heating power: 31.4 kW Motor cooling power: 0.58 kW; barrel cooling power: 1 kW Parison head Type: PE 1/200, single parison Max die diameter: 200 mm Head heating power: 14.2 kW Parison thickness control: hydraulic (wall-thickness programming) Clamp & blow unit Clamp force: 200 kN Max mould size: 650 × 500 mm (H) Mould thickness: 2 × 150 mm Mould opening stroke: 300 mm Horizontal carriage stroke: 660 mm Blow pin stroke: 240 ± 5 mm Blow pin thrust at 50 bar: 320 kg Electrical Installed power: 156 kW (average consumption ~104 kW) Supply: 400 V, 50 Hz, 318 A, 3 + N Hydraulic system Bwsdsyhbt Hjpfx Abtet Reservoir capacity: 400 l Pump flow (1470 rpm): 123 l/min Max pressure (main circuit): 190 bar Main hydraulic motor: 37 kW; oil cooling motor: 1.5 kW Pneumatics Operating pressure (general): 6–8 bar; air use: 2000–2500 Nl/min Post-cooling pressure: 6–8 bar; air use: 1000–1500 Nl/min Cooling water Mould circuit: 8–12 °C; flow 15 m³/h Extruder & hydraulic oil: 10–24 °C; flow 4 m³/h Dimensions & weights Approx. machine size (L × W × H): 7600 × 7700 × 3900 mm Blow unit weight: 7600 kg; Extrusion group weight: 6400 kg Noise level at operator: < 85 dB(A) Advanced Automation & Control Systems Hydraulic wall-thickness programming for precise parison control, improving weight distribution and top-load performance on 10 L containers. Dedicated Uniloy command and control software (version code available in manuals) with operator interface for setpoint management and diagnostics. Integrated temperature control across six extruder zones and heated head for stable processing at up to 300 °C transformation temperature. Interlocked guarding and emergency stops for safe operation. Production Line Integration Capabilities This second-hand extrusion blow molder is integration-ready for downstream equipment typical of a used bottling line and industrial packaging systems: Conveyor...

Condition: like new (used), functionality: fully functional, machine/vehicle number: Grundfoss CR 30-20, Grundfoss water pump, unused, but kept as a spare in the warehouse. Now it needs to be sold; the original purchase price was over 4,000. See the photos. The price is quoted excluding VAT (21%) and is for pickup in Uden. Shipping is possible; please inquire! CR 30-20, 27 m3 maximum flow rate / maximum pressure 2.4 bar, 24 meters, 400 volts. Bsdpfx Abozuui Tetjwt VADO in Uden supplies all types and sizes of pumps. Just get in touch.

Condition: used, Centrifugal pump, water pump -Pump housing: Nirosta -Pump wheel: stainless steel -Max. Delivery rate: 80 m³/h -Max. H: 4 mWs -Motor power: 2.5 kW -Speed: 1415 rpm -Pipe connection inlet: DN125 Bwodpfx Aodwc I Djbtst -Pipe connection outlet: DN80 -Number: 1x pumps available -Price: per piece -Dimensions: -Weight: 125 kg

Year of construction: 2013, operating hours: 1,300 h, condition: reconditioned (used), Skid similar, but not a Dynajet, Oertzen, Falch, DIBO, ... S500-30E-C - High-pressure pump: Falch xs31.1-30-500, 30 l/min at 500 bar (year of manufacture 01/08) - Motor: Electric, 30 kW - 1250 l water tank - Manometer - Pressure regulator - Safety valve - Steel frame, powder-coated - Covers made of aluminum Bedpfx Abjg Tm N Aotowt - Forklift pockets and crane eyelets - Dimensions with 1250 l water tank: approx. 1,100 x 1,760 x 1,770 - Unladen weight: 1,085 kg - Year of manufacture: 2013 - Operating hours: approx. 1500 h Condition: High-pressure pump overhauled in 06/2022. In very good used condition.

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, High pressure pump from PTV WJ3030B-1Z waterjet cutting machine. Bjdpfoyxmmzsx Abtowt Pump, reducer, main motor of 37 kW, flush valve are overhauled. H2O Jet intensifier 60K 301001-1-R.

Condition: good (used), centrifugal pump, water pump Bsdpfx Ascg Idlsbtewt -Flow rate: 5-42 m³/h -Motor power: 0.75 kW -Speed: 1410 rpm -Inlet pipe connection: DN50 -Pipe connection outlet: DN50 - Quantity: 1 pieces -Dimensions: 570/230/H310 mm -Weight: 40kg

Condition: new, Year of construction: 2025, machine/vehicle number: TR0042_ALM_RD56, COMPRESSED AIR DRYER ALMIG ALM-DGO 180 Type: ALM-DGO 180 Delivery quantity: 3.00 m³ / min * * Maximum compressed air flow, 35 ° C inlet temperature, 7 bar, 25 ° C ambient temperature, pressure dew point 5 ° C -Constant pressure dew point from +3° to +5°C for maximum process reliability. -Minimal pressure lice ensures immediate energy savings -Short start and response times ensure fast availability -Optimized heat exchanger design for maximum efficiency -Robust design for reliable continuous operation -Refrigerant R513a: efficient, environmentally friendly and durable -Low space requirement Bwjdjy Rqw Uopfx Abtet Max. working pressure 16 bar Max. inlet temperature 70°C Min./max. ambient temperature +5 to +50°C Pressure drop: 0.18 bar Ø power consumption: 0.47 kW Voltage/Frequency: 230V/50Hz Compressed air connection 1" Dimensions: L x W x H: 462 x 399 x 541 mm Weight: 34 kg For new machines, convenient leasing via our house bank is possible. Visit our store. We always have a wide range of new and used compressors in stock!

Year of construction: 2010, operating hours: 1,480 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1873076, We are offering this very well-maintained Uhde high-pressure pump for waterjet, HPS 4022, year of manufacture 2010. Manufacturer: Uhde High-Pressure Pump for Waterjet Model: HPS 4022 Year of Manufacture: 2010 Condition: Very good Category ID: 34 Machine Type: Uhde HPS Waterjet High-Pressure Pump If you have any questions or require further information, please feel free to send us a message or give us a call. Bwsdpoygmhtofx Abtjt