Used Circulation Thermostat for sale (1,221)

Year of construction: 2002, condition: ready for operation (used), Control Unit Brand SIEMENS Model Sinumerik 810 D Pedpfxoxgkc Ts Aaherc Movement X-Axis Movement 155 Z-Axis Movement 800 This SPINNER MT 350/750 was manufactured in 2002. A robust horizontal turning machine featuring a travel distance of X 155 mm and Z 800 mm, a circulation diameter over bed of 350 mm, and a turning length of 750 mm. Powered by a 9/11 kW drive and controlled by SINUMERIK 810 D, consider the opportunity to buy this SPINNER MT 350/750 horizontal turning machine. Contact us for more information. Application Types Turning

Condition: refurbished (used), WP Riehle Linie 60 Automatic Frying System Technical specifications: - Up to 60 products produced per cycle, Prsdpeuk Hllefx Aahoc - Hermetically sealed WP Riehle lid offers greater volume at the same weight, - Extended fat lifespan thanks to pulsed heating during preheating of the fryer, - Minimal energy consumption and constant temperature thanks to direct heating in the oil, - Minimal fat absorption due to steady temperature, - Temperature controller with safety thermostat, - Comes with fermentation trolley, - Automatic mode provides full control over the quality of baked goods.

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), overall weight: 32,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, gearing type: automatic, emission class: euro6, loading space width: 2,480 mm, loading space length: 6,220 mm, Year of construction: 2025, total width: 2,550 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH 500 8x2 crane F710 RA2.26 Winch preparation available Volvo: New model * Electro-hydraulically steered trailing axle, single tires * FH sleeper cab * 5600 mm wheelbase Prsdpfx Aasxpzfqohsc * Exhaust emissions according to Euro 6 Stage E, with SCR, particulate filter and exhaust gas recirculation * Diesel engine 12.8 l, 510 hp/375 kW, 2,550 Nm * Volvo Engine Brake+ (VEB+). Braking power 510 hp/375 kW (D13K) * Complies with ADR braking regulations * I-Shift AT2612F, automated 12-speed transmission (direct gear), max. input torque: 2,652 Nm * Liftable axle * Rear axle RSS1370A, single ratio, 13 t axle load, GZG 70 t * AA tires 315/70R22.5 * Drive axle ratio 2.85 : 1 * Diesel fuel * Driver comfort package * Air conditioning with automatic temperature control and sun sensor * Info and media package with navigation * Radio reception: AM/FM * USB connection, 3-way * 8 loudspeakers * High instruments: digital driver info display, 12'' with 4 views * Second driver info display, 9" bdisplay * TOMTO navigation system * AGM batteries, 2 x 210 Ah * Battery indicator in the display (volts, amps and battery status with warning function) * Main switch on the chassis * 330 L aluminum tank on the right, D-shaped, 710 mm high, 830 mm long * Fuel tank, normal ground clearance * AdBlue tank on the left, usable capacity 64 liters * Lockable fuel filler cap * Tank filler neck, spill protection * Exhaust direction to the rear * 2 foldable wheel chocks, transport mounting * Rear and side marker lights * Trailer cross member with D-value = 190 kN for G-150/G-260 hole pattern * Trailer cross member to frame end 85 mm * Frame length rear 4395 mm, measured from drive axle/1st drive axle * Trailer coupling Rockinger 400 G-150 (note D-value/max. trailer load!) * Electrical connection for semitrailer/trailer, 15-pin * Trailer/semitrailer connection Duomatic * Trailer connections in the middle * Stationary trailer brake (active up to 7 km/h) * Underride guard hi, aluminum, fixed, thin * 4x VA tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, steering axle 4x AA tires 315/70R22.5 Continental, Hybrid HD3, rolling resistance class: C, drive axle 2x NLA tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, trailing axle * Electric bleed pump * Transmission/I-Shift operation via control unit on the driver's seat * I-Shift driving mode: Standard, Performance and Economy * Autoreturn in Economy mode * No manual intervention in automatic mode, without kickdown * Cruise Control (cruise control) * Transmission oil cooler, basic, water/oil * 2-cylinder air compressor, 1100 l/min, for vehicles/combinations with increased air requirement * Front air intake with normal air filter * Alternator 150A/4200W * External noise in accordance with ECE R51.03 Phase 2, with low-noise certificate and L plate * Closed crankcase ventilation * Double fuel filter on the engine, large for poor fuel quality, e.g. in Eastern Europe * Fuel filter with water separator * PTO (medium-speed PTR-DM), on transmission side, connection: 1 DIN at rear for pump * NA on gearbox, max. output 600 Nm * Dynamic equipment: seats in fabric, yl (blue/dark blue) with interior in gray fabric Comfort driver's seat, air suspension, heated, seat belt in seat * Standard front passenger seat, air suspension * Lower bunk, foldable, 2000x815/740/660 mm (center, top, bottom) with safety net * Cab heater, 2 kW * Storage space under the bunk * Cool box with freezer compartment 33 L under the couch *

Condition: ready for operation (used), Year of construction: 1976, functionality: fully functional, center width: 800 mm, center height: 350 mm, spindle motor power: 4,000 W, total length: 21,000 mm, spindle speed (min.): 200 rpm, spindle speed (max.): 1,000 rpm, overall weight: 1,100 kg, input voltage: 380 V, power: 4 kW (5.44 HP), type of input current: three-phase, Hand-operated pressing machine Manufacturer: Leifeld Type: Plb 300 - High-performance, robust machine - Excellent technical condition - All functions tested - New electrical system and push-button controls - Newly painted Technical Data Centre height: mm 350 Podexp Sb Ajpfx Aahsrc Centre distance: mm 800 Machine length: mm 2100 Spindle motor: kW 4.0 4-speed gearbox Speeds: approx. rpm 200 – 1000 Spindle mount: M60 DIN 800 Manual tool rest Tailstock stroke: mm 280 Precise fine adjustment on tailstock quill Morse taper: MT 3 Machine weight: approx. kg 1100 Special equipment integrated in the machine: - Centre height mm 350 - Ball bearing live centre MT 3 - Stepless spindle speed adjustment within gearbox ranges using frequency-controlled drive motor - Electrical system - Oil circulation lubrication On request: - Cross slide PS30/300

Condition: new, Airplan — Modular Drying Kit for Lumber & Pallets Short Description Airplan is the simplest and most cost-effective solution for drying wood, especially softwoods. It is a ready-to-install kit designed to be mounted inside a structure you construct yourself (according to our supplied drawings), with a capacity of up to 25 cubic meters. With Airplan, you minimize your investment while achieving precise and professional drying results for lumber or pallets. What It Is Airplan is a comprehensive drying kit that includes everything required to convert a simple enclosure into a professional wood-drying chamber. We provide the structural drawing—you build the housing, install our kit, and you're ready to start drying. Main Components - 3 industrial axial fans for controlled air circulation - Electric heating element kit to ensure reliable heat supply - 2 automatic dampers for optimized air exchange and humidity regulation Podpfx Aexnbcteahjrc - Electrical control panel with drying software interface, including all necessary power and control connections - Water spray pipe with nozzles Key Benefits - Minimal capital investment—purchase only the essentials, not an entire prefabricated kiln - Reduced transport costs due to the compact kit format - Fast and straightforward installation with user-friendly operation - Professional-grade components and high-quality materials for long service life - Precise drying control suitable for both lumber and pallet production Applications - Small to medium-sized sawmills - Pallet manufacturers - On-site drying operations where a complete kiln is not economical - Pilot installations before scaling up to larger systems What We Provide - Complete Airplan kit (see components above) - Structural drawing and installation guidelines - Basic start-up support and commissioning instructions Next Steps / Contact For a quote, technical information (electrical requirements, power ratings), or the structural drawing, please contact us with your desired drying capacity and planned enclosure dimensions. We will tailor the configuration to your needs and provide a detailed offer.

Condition: used, functionality: fully functional, Scheugenpflug A310 K4750-X11 Material Preparation and Feeding unit. The all-round system A310 simultaneously prepares the dispensing material while loading it from the barrel. Temperature control also helps to optimise the viscosity of the dispensing medium. The applied vacuum evacuates air trapped in the material already during preparation. Degassed material is required for a bubble-free dispensing process. Circulating the dispensing material continuously prevents sedimentation of the contained filler materials and keeps the properties of the dispensing material components at a constant level. The stirring intensity is adjusted to the dispensing material being prepared. Used for l Materials: • One and two component • Liquid to medium viscous • Non-abrasive to highly abrasive • Non-filled to highly filled Technical Data: • W x H x D (1C-60 l) 700 x 1950 x 1000 mm W x H x D (2C-60/60 l) 700 x 1950 x 1400 mm • Weight: 240 kg (1C-60 l) Pjdotp Df Hepfx Aahsrc 400 kg (2C-60/60 l) • Feeding volume: 250 ml/stroke • Power supply: 3~ 400 V, 50/60 Hz, CEE 16 A • Ejector evacuation power: 12 l/min (at 6 bar) • Vacuum pump evac. power: 242 - 283 l/min • Heating capacity: up to 80°C • Peripheral speed of agitation blade: 39 rpm • Tank heater power: (230 V) approx. 1000 W Good working condition. Please check out our other listings as well.

Condition: new, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: automatic, color: white, number of seats: 23, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Sprinter 519 Lord Comfort Exclusive with Glass Roof in White Sprinter 517 Lord Comfort Exclusive with Glass Roof in Silver Stock vehicles available for immediate delivery Vehicles are equipped with the new GSR2 systems as required, including: - Driver Comfort Package - Reversing Camera - Blind Spot Assist - Turning Assist - MBUX 10-inch (radio with Bluetooth, CarPlay, touchscreen) - Tire Pressure Sensors - Attention Assist - Active Lane Keeping Assist - Start Assistance Info - Intelligent Speed Assist - Distance Assist - Rain Sensor - Electric Exterior Mirrors - Adaptive Cruise Control Equipment Package Original Mercedes - Front Air Conditioning - Auxiliary Heater - Heated Air-Sprung Driver’s Seat - Front and Rear Park Distance Control / Front and Rear-View Cameras - Fog Lights - 9-Speed Automatic Transmission 519 additionally with LED headlights - Rear Extension 500 mm, Total Length 7,836 mm - Thermal and Acoustic Insulation Prjdpjxpqq Asfx Aahsc - Extra Large Panoramic Windows inside and out, Double Glazed - Driver Panoramic Window with Electric Sunblind - Glass Roof - 19 Sleeper Seats + Tour Guide Seat - Total Capacity 20 incl. Driver - Webasto / Diavia 12 kW Roof-Mounted Air Conditioner in Passenger Area - Multi-level Night Lighting white/orange/blue - Convector Heaters left & right in passenger compartment, thermostatically controlled - Electric Side Swing Door - Sleeper Seats with 3-point belts & Magazine Pocket - Double Glazing, Tinted Black - Side Walls and Ceiling finished in fabric and artificial leather (no plain ABS or exposed metal in the interior) - All add-on parts painted in vehicle color - Clock in passenger compartment - USB ports at every row of seats - Ceiling channels left & right with luggage racks and service sets incl. reading lights, loudspeakers - Half Podium - Lowered and movable luggage compartment for rear row - Refrigerator - Optional: Hubcaps Flooring: Gerflor wood-look finish Net export possible. We make worldwide shipments. Price 517 Silver: €112,990.00 Price 519 White: €114,990.00

Condition: used, Year of construction: 2002, - Siemens 840D Sinumerik control system - Driven tools - 12 tool positions - Drag frame magazine 20 places - chip conveyor - Coolant system - Year of construction 2002 Technical data: Prsderbltpspfx Aahsc - Rotation Ø: 235 mm - Z-axis (vertical): 250 mm - X-axis (horizontal): 450 mm + 370 mm - Workpiece height: 100 mm - Ø in front bearing: 90 mm - Spindle head with short taper DIN 55026: A5 - Hollow shaft motor with oil circulation cooling: integrated in the headstock - Nominal power 100% ED: 29.3 kW - Nominal torque 100% ED: 200 Nm - Nominal speed: 1400 rpm - Maximum speed: 6500 rpm - Z-axis travel speed: max. 30 m/min - Traversing speed X-axis: max. 60 m/min Tool changer: - Number of switching positions: 16 - Permissible tangential torque (turret locked): 1300 Nm - Permissible mass moment of inertia of tool disk, tool holders and tools: 2.5 kgm² - Permissible unbalance (load torque) due to equipping with tool holders and tools: 32 Nm - Hydraulic operating pressure: 50 bar ± 10% - Weight of the turret: approx. 50 kg Dimensions - Dimensions WxHxD: 4400 x 2800 x 2600 mm - Machine weight: approx. 7000 kg

Condition: used, all stainless steel nett belt length 3.000 mm nett belt width 400 mm mesh width ± 8 mm suitable for thermal oil heating (= 120 kW) with top hold down belt oil circulation pump level control adjustable speed infeed conveyor outfeed conveyor sediment removal system lifting unit with electrical hoists suitable for fire protection overall length : ± 5.400 mm overall width : ± 1.500 mm Prodpfx Aasxlpuljhec New electric control box with new electrical components

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, center width: 800 mm, center height: 350 mm, spindle motor power: 4,000 W, total length: 21,000 mm, spindle speed (min.): 200 rpm, spindle speed (max.): 1,000 rpm, overall weight: 1,100 kg, input voltage: 380 V, power: 4 kW (5.44 HP), type of input current: three-phase, Manual spinning machine make Leifeld Type Plb 300 - Powerful, solid machine - Very good technical machine condition - All functions checked - Electrics and buttons - operation new - New paintwork Technical data Prodpfx Aordzv Rsahoc Tip height mm 350 Tip width mm 800 Machine length mm 2100 Spindle motor kW 4.0 4-speed gearbox Speeds approx. 1/min 200 - 1000 Spindle holder M60 DIN 800 Hand steel support Tailstock - stroke mm 280 Quill - fine adjustment Morse taper MK 3 Machine weight approx. kg 1100 Special equipment built into the machine - Tip height mm 350 - MK 3 ball bearing pressure center - Stepless spindle speed control in the indexing steps by frequency-controlled drive motor - Electrical switching - Circulating oil lubrication On request: - Cross support PS30/300

Year of construction: 2006, condition: good (used), Description Brand Fimar Model FME 4+4 ID 0069 Status Active Price 800 € + VAT Location Oradea (RO) Professional electric pizza, bread oven - rustic frontal lining - refractory cooking surface - heat insulation by rock wool lining - doors with Pirex inspection glass - pyrometers - interior lighting - 2 thermostats per chamber. POWER: 8,4 kW POWER SUPPLY: 230V/1N/50-60Hz - 230-400V/3-3N/50-60Hz CURRENT: 40A - 15A (230V/1N) (400V/3N) WORKING TEMPERATURE: 50 ÷ 500 °C COOKING CHAMBER DIMENSIONS: 610x610x140h (mm) x2 DIMENSIONS: 900x735x750h (mm) NET WEIGHT: 114 Kg GROSS WEIGHT: 139 Kg ExWorks. Price is negotiable. Prsdpfx Aasd Hzayjhjc Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. Hablamos Español. Beszélünk magyarul. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervam dreptul la greseli, modificari si vanzare prealabila.

Condition: used, functionality: fully functional, Julabo FCW 2500T Recirculating Chiller. Julabo FC circulating chillers are an environmentally friendly and economical way to perform any cooling task, making them the perfect alternative to tap water cooling. Their compact design makes them easy to place under laboratory benches and their bright display makes it easy to read the current and set temperature. Main features of FC circulating chillers: - Bright LED temperature display with 0.1 °C resolution - MULTI-DISPLAY with complex menu functions (e.g. control parameters, alarm functions, calibration setting) - ACC full temperature range cooling - ATC1 1-point calibration - PID1 temperature controller Pedpfx Ajuyu R Noahjrc - Integrated timer - Continuously operating, powerful circulating pump - Pressure display: 0...2,5 bar - Front filling level indicator - Low and high temperature protection with audible alarm - Dry run protection with visual and audible alarm - RS 232 with LIMS option - With bath drainage tap - Removable cooling grid for easy cleaning of the heat exchanger - Integrated 1.2 kW heating coil - W models with water-cooled cooling system Good working condition. Please check out our other listings as well.

Condition: new, power: 450 kW (611.83 HP), fuel type: gas, color: blue, Year of construction: 2021, Year of manufacture: 2021 Empty weight: 215.000 kg Make of engine: Perkins Cargo space capacity: 4.000 l Productivity: 240 tph 1.1 COLD AGGREGATE FFEDING CHASSIS 5 1.2 Feeding bunkers and dosage conveyor bands 1+1 1.3 Collector and dryer mounted on the feeding conveyor band 1 1.4 STATIONARY CHASSIS 1 1.5 ROTARY DRYER GROUP 1 1.6 Dryer body 1 1.7 Aggregate inlet head 1 Predpfjw Hzi Hjx Aahec 1.8 Aggregate outlet head 1 1.9 Burner group (BALTUR) 1SET 1.10 Burner fuel pump 1 1.11 Burner blower fan 1 1.12 Elevator inlet 1 2.1 MIXER CHASSIS GROUP 1 2.2 Asphalt Mixer + Hot Aggregate Elevator 1 2.3 Aggregate weighing scale bunker 1 2.4 Filler Elevator and Weighing scale bunker 1 2.5 Filler Screw Conveyor 1 2.6 Bitumen weighing scale bunker 1 2.7 Mixer bitumen pump 1 2.8 Undersize hot aggregate silo(50T) 1 2.9 Filler stock silo 25 M3 1 2.10 Vibration Screen 1 3 DUST COLLECTING FILTER SET 3.1 Jet-Pulse filter body 1 Set 3.2 Nomex filter bag and cartridges 1 Set 3.3 Dust collector V spiral and bunker 1+1 Set 3.4 Filler silo(25Tons) 1 Set 3.5 Filler Screw Conveyor 1 Set 3.6 Filter absorption fan 1Set 3.7 Dirty gas channel 1 Set 3.8 Chassis group 1 Set 4 BITUMEN STOCK TANK 4.1 40 Ton capacity boiling oil heating isolation bitumen tank 4 SET 4.2 3 way pneumatic jacket valve group 2 SET 4.3 Mixer bitumen feeding pump 1 SET 4.5 Mixer bitumen weighing scale feeding pipe line 1 SET 4.6 Bitumen transfer pump 1 SET 4.7 Double wall bitumen pipe installations 1 SET 4.8 30 Ton capacity boiling oil heating isolation bitumen tank 3 SET 4.9 3 way pneumatic jacket valve group 2 SET 5 FUEL AND THERMAl GENERATOR CHASSIS GROUP 5.1 1.500.000 kcal/h capacity Thermal oil generator 1 SET 5.2 Boiling oil heating boiler 1 SET 5.3 Boiling oil circulation pump 1 SET 5.4 Fuel replenishing pump 1 SET 5.5 Fueling pump 1 SET 5.6 Automation-Control Cabin-Software-Compressor 1 SET

Condition: ready for operation (used), Year of construction: 2007, operating hours: 16,581 h, functionality: fully functional, machine/vehicle number: 9108 000 046S, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, table load: 200 kg, spindle speed (max.): 10,000 rpm, Machining Center with B & C Axis! TECHNICAL DETAILS X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: -5 / +100° C-axis: +/- 360° Work Table Clamping Area: Ø630 x 500 mm Max. Table Load: 200 kg Spindle Speeds: 10,000 rpm Tool Holder DIN 69893: HSK-A63 Tool Magazine Positions: 16 MACHINE DETAILS Control: SIN 840 D Total Power Requirement: 38 kVA Dimensions & Weight Dimensions: 5 x 5.5 x 2.5 m Machine Weight approx.: 4,500 kg Operating Hours Spindle Hours: 16,581 h Power-On Hours: 28,521 h EQUIPMENT Renishaw NC4 Tool Measuring Prodpfjxf A S Dox Aahec Renishaw probe preparation Electronic Handwheel Spindle Oil Cooling System Coolant Recirculation with Ruma Centrifuge Kraft & Bauer fire extinguishing system (incl. extinguishing agent bottle) Elbaron Air Purification System 4 machine feet

Condition: like new (used), Year of construction: 2024, operating hours: 200 h, functionality: fully functional, machine/vehicle number: 159422, Verderflex Dura 35 peristaltic pump, serial number: 159422, MFG: 2024 For demanding applications, the Verderflex Dura 35 provides: Maximum flow rate: 5,292 L/hr Maximum pressure: 16 bar Maximum medium temperature: 80 ºC Compressible solid size: 8.75 mm Suction lift: 9.5 mWc Certification: ATEX, FDA and EC/1935 Pump Housing made from cast iron (GG25) Front Cover made from carbon steel with plexiglass inspection window Rotor made from cast iron (GG25) Drive Shaft EN24T Steel Prjdpfx Aaowdtbcehjc Mounting Frame made from carbon steel Torque Arm made from carbon steel Bearing made from bearing steel Flow 11/hr Pump speed 35 PM Installed motor power 25W Max turndown at 5 Bar discharge pressure 101 Verderflex peristaltic pumps are the ideal low cost life cycle solution for the transfer and dosing of difficult to pump fluids such as viscous, abrasive or high solid content liquids such as slurry and sludge. Sizes range from small models such as OEM pump modules, precision and industrial style tube pumps to the world's largest hose pumps, used in the most demanding applications. These include water treatment, biotechnology, food & drink production, mineral processing and chemical manufacturing. Features : • Peristaltic pumps are excellent problem solving pumps and offer the following benefits: • Abrasion Resistant • No moving parts in the liquid stream • Accurate Dosing • Self Priming • Can pump liquids containing up to 80% • inorganic solids (fines) • Aseptic pumping • smooth liquid passage • Easy and completely cleanable without disassembly • Suitable for handling shear sensitive products • Can run dry • Low cost of ownership • High suction capability of up to • 95% vacuum or a 9.5 mWc • No seals • Reversible rotation, empties line or blockages • Can pump • abrasive, very viscous or • high density fluids Application for abrasive fluids : Lime mixing, Kieselguhr, circulation and dosing Application for corrosive fluids : Ferric Chloride, Copper Sulphate and similar Activators, process chemicals, Acids, including Alkalis Application for shear sensitive fluids : Coagulants, Flocculants and bacterial remediation treatments Application for mining industry : Dosing Process Reagents, Thickener Underflow, polymers and slurry transfer Application for water treatment : Dosing Lime, Hypochlorite, Silicate, Polymer, Ferric Chloride, sludge transfer and filter press feeds Application for chemical Industry : Corrosive Acids, Bases and Hydrocarbons Application for Printing and packaging : Inks (including water based inks), Paints, Dyes and Glue Application for Battery Filling, Chemical Cleaning, Equipment Sterilising, Seed Coating : Biocides, Hydrogen Peroxide, Sodium Hypochlorite, Caustic Soda Application for Laboratory Systems : Biological Broths to polluted streams Application for Agriculture : Feed Additives, Animal Vaccines and Waste Transfer Application for Paper and Pulp : Pulp and Dyes Food and Beverage : Breweries, Diatomaceous Earth, wineries, dairies, sugar refining, abattoirs The pump is in excellent condition, like new. Price Euro 4.500 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, New: Yes Colour: Silver Applicable material: Bitumen Empty weight: 9.500 kg Cargo space capacity: 50.000 l Productivity: 50 tph BITUMEN TANK (50 TONS) • Tanks capacity shall be 50 tons. • Tanks shall be produced in accordance with TSE and highway commission practices. • The tank shall incorporate a hot oil heating, • Seamless steel drawn pipe serpentine system to heat • The bitumentemperature up to mixer mixing temperature • The fuel tank shall incorporate level and heat indicator, suction nozzle, filling orifice, ventilation system, inspection hatch and drain outlet. • There shall be support legs under the tank and its surface shall be isolated with 50 mm rock wool and covered with 0,80 mm galvanized sheet. 1. HOT OIL GENERATOR • Generator capacity shall be 2 000.000 kcal/h. • The system shall be made according to diesel fuel system. • The generator shall incorporate a 1500 l filling tank. Prjdpfx Asw Hzfnoahoc • The generator shall be horizontal, have seamless steel drawn hot oil pipe, double wall and circulation body. • Generator body shall be isolated with 100 mm rock wool and covered with aluminium sheet. • Generator system shall be produced according to manufacture standards and it shall incorporate an expansion tank, degasser, oil filter, valves and full automatic ignition controlled burner, control panel, pomp and necessary safety equipment. • The serpentine be made of min. 30 m2 seamless steel drawn pipe. • The generator shall be equipped with coupled warning system to protect the complete system in case of dangerous situations showing hot oil level or a decrease in heat transfer oil level. • The burner system shall be designed to activate automatically depending on the adjusted operation temperature of the heat transfer oil. • The system shall be produced in the form of a complete package.

Condition: excellent (used), Year of construction: 2010, We sell 156 used stackable-nestable bread crate, make BROBAN KRAT with metal 7 rollies in very good condition. This type of crate, a stackable-nestable bread crate, make BROBAN KRAT, with a capacity of 47 liters and dimensions of 700 x 496 x H 190 mm, offers versatility and convenience for the bakery industry. This crate is designed to meet the needs of both transporting and displaying various types of bread. With its galvanized stacking handle and stacking lugs, the crate is ideal for multi-level stacking, allowing for space-saving and efficient use of storage space. Whether it's organizing stock in the bakery or transporting bread to different locations, this functionality provesto be highly beneficial. The perforated bottom and side walls not only provide strength and durability to the crate but also ensure proper air circulation. This promotes the freshness of the bread by guaranteeing optimal ventilation during both transport and storage. Psdsvuclgspfx Aaherc This crate is a versatile solution suitable for all types of bread, from baguettes to artisan loaves. Thanks to its features, it is ideal for bakeries that value both efficiency and maintaining the quality of their products during transport and presentation. Price 2,000 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, Empty weight: 290.000 kg Cargo space capacity: 3.000.000 l Productivity: 200 tph 1.1 COLD AGGREGATE FFEDING CHASSIS 4 1.2 Feeding bunkers and dosage conveyor bands 1+1 1.3 Collector and dryer mounted on the feeding conveyor band 1 1.4 STATIONARY CHASSIS 1 1.5 ROTARY DRYER GROUP 1 1.6 Dryer body 1 Psdpfx Asw Hzdkoahsrc 1.7 Aggregate inlet head 1 1.8 Aggregate outlet head 1 1.9 Burner group (BALTUR) 1SET 1.10 Burner fuel pump 1 1.11 Burner blower fan 1 1.12 Elevator inlet 1 2.1 MIXER CHASSIS GROUP 1 2.2 Asphalt Mixer + Hot Aggregate Elevator 1 2.3 Aggregate weighing scale bunker 1 2.4 Filler Elevator and Weighing scale bunker 1 2.5 Filler Screw Conveyor 1 2.6 Bitumen weighing scale bunker 1 2.7 Mixer bitumen pump 1 2.8 Undersize hot aggregate silo(50T) 0 2.9 Filler stock silo 25 M3 1 2.10 Vibration Screen 1 3 DUST COLLECTING FILTER SET 3.1 Jet-Pulse filter body 1 Set 3.2 Nomex filter bag and cartridges 1 Set 3.3 Dust collector V spiral and bunker 1+1 Set 3.4 Filler silo(25Tons) 1 Set 3.5 Filler Screw Conveyor 1 Set 3.6 Filter absorption fan 1Set 3.7 Dirty gas channel 1 Set 3.8 Chassis group 1 Set 4 BITUMEN STOCK TANK 4.1 30 Ton capacity boiling oil heating isolation bitumen tank 3 SET 4.2 3 way pneumatic jacket valve group 2 SET 4.3 Mixer bitumen feeding pump 1 SET 4.5 Mixer bitumen weighing scale feeding pipe line 1 SET 4.6 Bitumen transfer pump 1 SET 4.7 Double wall bitumen pipe installations 1 SET 4.8 30 Ton capacity boiling oil heating isolation bitumen tank 3 SET 4.9 3 way pneumatic jacket valve group 2 SET 5 FUEL AND THERMAK GENERATOR CHASSIS GROUP 5.1 1.500.000 kcal/h capacity Thermal oil generator 1 SET 5.2 Boiling oil heating boiler 1 SET 5.3 Boiling oil circulation pump 1 SET 5.4 Fuel replenishing pump 1 SET 5.5 Fueling pump 1 SET 5.6 Automation-Control Cabin-Software-Compressor 1 SET

Year of construction: 2016, condition: defective spare-parts repository (used), machine/vehicle number: 00050, Precision Temperature Control Unit (TCU) - BOFA THE DISPLAY CONTROLLER IS DEFECTIVE! Year of manufacture: November 2016, serial number 00050, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module Prodpfx Aashgr Ihjhoc 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Sales price: 1.500 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2008, condition: like new (used), We sell a package of 26 cooling systems - Alfa Laval brand evaporators, all of which work on the glycol cooling system. The systems are powered at 220V or 380V or have an interchangeable power supply system according to the user's needs. The year of manufacture of the systems is 2008. We can sell also piece by piece not only as a package upon request. Commercial unit coolers designed for use in small and medium cold rooms from 10 up to 400 m³. Models designed for easy maintenance with immediate access to inspection areas. This series is available as a DX evaporator and brine unit cooler. Finned coil - H(C)FC Inner grooved Cu tubing ø 12 mm, triangular tube pitch - Brine Smooth Cu tubing ø 12 mm, triangular tube pitch - Corrugated Alu-fins - Fin spacings 4, 5.5, 6, 7, 8, 10 and 11 mm. • 1 to 4 AC fans, ø 250 mm up to ø 500 mm, drawing through the coil. Fan motors 230V/50-60Hz/1ph or 400V/50-60Hz/3ph in two noise levels (H/L). Motors with dynamically and statically balanced external rotors, manufactured in accordance with VDE 0530/12.84. • Corrosion resistant materials: coil frame AluZinc, casing strong and durable sheet metal, powder-coated RAL 9002. • Hinged drip tray and side covers for easy installation and maintenance. • Sufficient space for mounting of expansion valve inside the casing. • Mounting brackets allow flush ceiling mounting. • Fitted with schräder valve on the suction connection for testing purposes. • Pumped system available on request. • Stickers indicate fan direction and refrigerant in/out. • Delivery in mounting position. Coolers are mounted on wooden beams. Installation can take place with the use of a forklift. 1 AlfaCubic series (BL, GL, RL) 2 Refrigerant system (E = dry expansion, W=water/glycol, 3 Noise level (H=high, L=low) Prjdpfeg N Db Hsx Aahsc 4 Fan diameter (25=250, 35=350, 40=400, 50=500 mm) 5 Number of fans (1 to 4) 6 No. of tube rows (A=4, B=6, C=8) 7 Phases (S= single-phase, D= 3 phases Δ connection) 8 Motor voltage (230V, 400V) 9 No. of circuits 10 Packing (CR=crate) 11 Casing material (AP= powder coated, SS= stainless steel) 12 Defrost system (A= air, E= electric defrost, HG= hotgas) 13 Fin material/coating (AL=aluminium, EP= epoxy coated aluminium) 14 Fin spacing (4, 5.5, 6, 7, 8, 10 and 11 mm) 15 Tube material (Cu=copper) The evaporator coils of these units are high performance and are built-in 1/2 ”fluted copper tube and fin corrugated aluminium with gaps of 3.5, 6 and 8mm. The frame, made of aluminium sheet, is provided with protection collars. This frame has the application of thermostatic expansion valves. Regarding their exterior structure, they are manufactured in aluminium painted in high resistance RAL-9018 polyester colour. The vibrations in these machines are avoided thanks to the fact that their entire structure is compact and highly rigid. All its parts are easily removable for maintenance. These evaporators are fitted as standard with helical fans with high-performance protection grilles and are equipped with 315 or 350mm motors. diameter. Single-phase for 230V 50Hz, with a degree of protection IP-54, with external rotor and low consumption. All motors are connected to a watertight general box, according to IP-55 regulations. Finally, defrosting is carried out with 230V electric heaters built in armoured stainless steel tubes. Its vulcanized ends avoid derivations and are inserted inside the battery and the tray. They are connected to a watertight junction box. Application: Lo

Year of construction: 2006, operating hours: 0 h, condition: as good as new (ex-display), machine/vehicle number: 31331, DISTILLER DNP 2000 SEMI-AUTOMATIC STEAM DISTILLATION SYSTEM - PROTEIN-NITROGEN Raypa DNP-2000 Year of manufacture 2006, unused Protein-Nitrogen distiller based on Kjeldahl method. Automatic, to analyse proteic nitrogen in raw material samples or processed material for food industry. Specific methods availables. Results complies with regulations: EN/ISO, AOAC. NITROGEN DISTILLER – DNP-2000 Features • Twenty user free programs. • Additionally, the system has three fixed programs: – Ammonium sulphate test. – Preheating of the system. – Sample waste washing. Advantages • Optional kit for automatic titration. • Sample suction. • 20 user programs. • Pump calibration by end-user. • Steam generator with water level control. • Boric acid pump. • Open door sensor. Performance Podpfx Aofiliwjaherc • Measurement range: from 0,1 to 200 mg of N. • Nitrogen recovery: ᐳ 99,5%. • Reproducibility: ± 1%. • Distillation time: 4 min/100 ml. • Cooling water consume: 1,2 l/min. • Power: 2000 W (100%). Programmable parameters and values • Water for dilution: 0-240 ml. • OHNa solution: 0-240 ml. • H3BO3 solution: 0-240 ml. • Reaction time (delay): 0-30 min. • Distillation time: 0-30 min or indefinite. • Steam power regulation: 30-100%. Safety • Closed door detection. • Digestion tube detection. • Over-temperature thermostat. • Uses in the food industry but also in oenology for vinification. • Documents: Manual instruction + mounting gaskets and socket • For the Romanian companies there is the possibility of selling in installments. Price Euro 4.000 + VAT Ex Works Loaded of FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2016, condition: as good as new (ex-display), machine/vehicle number: 00069, Precision Temperature Control Unit (TCU) - BOFA Year of manufacture: November 2016, serial number 00069, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Podpfxshgfnbs Aahsrc Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Sales price: 1.900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 181941, Air Delivery System: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 0.5°C Cooling Capacity: 2000W Temperature Sensor: shared output from integrated printer sensor (0 – 10V input over 0 – 50°C) Air In Filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant Gas: R134a 0.75Kg Full load current: 12.6A Start Up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Prsdpohg Rcxjfx Aahsc Acoustic Noise: > 75dB Dimensions: 1300mm High (+ beacon), 510mm, 540mm Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 100Kg Documentation not included the TCM is a precision temperature control module designed to enhance the Print Process by providing a highly stable and accurately controlled air temperature within DEK's range of printers. The operating range of the TCM offers wide control of the process s temperature either side of factory ambient. As applications become more varied the requirement to produce high yield results can be aided by the ability to heat as well as cool from factory ambient. Adhesive printing for example benefits from a temperature in the 25-30°C range, which is generally higher than conditioned factory ambient. Conditioned air is fed from the TCM into the print area and returned via ducting located beneath the printer. Ducting design has been formed to achieve minimal airflow rates over the process area prolonging tack performance of solder pastes and increasing stencil life. Due to its optimised design and re-circulating system the TCM is energy efficient and requires minimal input power from a single-phase mains supply. Exhaust air is vented through the top of the TCM alleviating the need for any connection to factory extraction systems. The TCM will automatically shut down following a predetermined delay if the printer is powered down or covers are left open. To monitor process temperature the TCM utilises the output from the printers integrated Temperature Sensor located on the print carriage resulting in accurate feedback and control. To prevent process contamination conditioned air is passed through a filter before entering the printer. The possibility of process contamination is further reduced due to the TCM maintaining a higher air pressure within the printer compared to the surrounding environment thus limiting the ingress of airborne particulates. The Modules operating status is indicated by provision of a 'four colour' beacon clearly visible to line operators. Any condensate produced can be gravity piped to drain or collected in an easy to empty 5-litre container. Two sensors monitor condensate level and give a warning via the beacon when container requires emptying. The TCM will automatically shut down if the container is not emptied to prevent overflow. Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten /

Condition: good (used), Year of construction: 2017, 3D Printer ORLAS CREATOR SLM250, MFG 2017,-the equipment shows little use; the tablet has a cracked screen; it does not have a 3D scanner component, SN: SLM250172801 makes complex parts, using metallic or non-metallic powders; wireless controller; benchmark dimensions achieved: 100 x 100 mm; gas used as protective atmosphere: argon/nitrogen; layer size: 20-100 micrometers; laser type: Yb Fiber Laser 250 W; wavelength: 1070 nanometers; Precision F-Theta lenses; dimensions: 717x858x1794 mm; mass: 470 kg; specific software: Creator user interface, APP Suite application "3D printing"; IMPORTANT: The equipment shows little use; the tablet has a cracked screen; it does not have a 3D scanner component; Specifications Building volume: ø = 110 mm x 100 mm Powder reservoir volume: ø = 110 mm x 200 mm High power 250W cw Yb: Fibre laser Wave length: 1070 nm High efficiency Exceptional beam quality and power stability Air cooled Spot size: 40 µm - 120 µm Process chamber • High-end process chamber, suitable for low-oxygen process environment • Recommended inert gas: Argon / Nitrogen • included extraction unit for cleaning of the process environment (max. flow rate: 190m³ / h) Coating system - 360° circulating coater for high efficient coating process - Rubber coating blade - Micrometre screws for optimum coater alignment User interface - 12’’ Microsoft Surface Pro 3 tablet controller - Unique wireless control concept - Easy control of all printing parameters - Cloud manufacturing concept Dimensions - System dimensions: 717 mm x 858 mm x 1794 mm - Machine opening: 450 mm x 180 mm - Power supply: (V/Ph/Hz): 230/1/50 - Power setting: max. 10 A - Weight: 430 kg CAD / CAM Software APP SUITE, including 3D printing application - solid slicing of 3D objects - extended repair functionality of 3D parts - automatic generation of support structures - complete control of all printing strategy Parameters Welcome Package - - APP SUITE Software Basic Package - - Accessories Zero-Point Clamping System - - Adjustment aid for aligning the construction platform - - Hose adapter for inert gas supply 6mm to 1/4inch - - Cleaning cloths and optics cleaning liquid - - ESD brush for safe system and component cleaning - - Allen key set - - Stainless steel shovel Price Euro 38,900 Euro + VAT, FCA: Bucharest/ Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare Prodpfx Asunaqveahoc We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 2310-028, Precision Temperature Control Unit (TCU) - BOFA Year of manufacture: November 2013, serial number 2310-028, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Prsdpfxshgg Rrj Aahjc Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana