Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper
-Span width: 50 to 100 mm
Be008h8jjg
-Load capacity: 1 ton
-Dimensions: 225/80/H190 mm
-Weight: 5.8 kg
heating capacity: kW
Degree of protection:
Degree of protection m³/h:
Total weight, approx.: 45 o. Schrank kg
Mwbiz0
total power requirement: 13 kW
voltage: 3 x 400 - 480 / 50-60 V / Hz
dimensions L x W x H: 0,87 x 0,60 x 1,0 o.Unterschrank m
dimensions: Unterschrank: 1130x690x845 mm
The Power Clamp shrink fit device uses an induction coil as its operating principle.
We use the VS32H coil, which can be adjusted manually via a turntable. For special chucks (e.g. large chucks but short length)...
1 piece each
AR5-70/100 SP
AR6-70/100 SX
AR6-90/130 SX
AR6-110/170 SX
AR6-140/230 SX
Buela7rire
without inserts unused, light corrosion
Clamping devices, clamps, deep clamping jaws, clamping pads, clamping tools, step clamps, low clamps, clamping irons, accessories
-for T-slot: 48 mm
-Clamping height up to: approx. 300 mm
-Clamping depth: 140 mm
Gfwwvph
-Price: per piece
-Number: 5 pieces
-Dimensions: 200/100/H450 mm
-Weight: 4.2 kg
We sell a position clamping tools/accessories from an insolvency!
Scope and condition according to the pictures.
Stvueg
Sale from an insolvency.
Buyer receives an invoice for the purchase price with
declared VAT
Sale from insolvency therefore under exclusion of any warranty!
Over 10.000 different articles in stock! Please inquire!
Visits are possible at any time by arrangement.
Clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws
-Length: 850 mm
-Recording: 34 x 75 mm/22 x 85 mm
-Dimensions: 850/80/H75 mm
-Weight: 34 kg
Gxs7edl
Clamping devices, clamps, deep clamping jaws, clamping pads, clamping tools, step clamps, low clamps, clamping irons, accessories
-for T-slot: 30 mm
-Clamping height up to: approx. 300 mm
-Clamping depth: 140 mm
-Price: per piece
-Number: 10 pieces
-Dimensions: 180/80/H440 mm
Blodg9di
-Weight: 2.6 kg
Clamping devices, clamps, deep clamping jaws, clamping pads, clamping tools, step clamps, low clamps, clamping irons, accessories
-Clamping height up to: approx. 260 mm
Kc2dbsxj
-Clamping depth: 140 mm
-Price: complete
-Number: 3 pieces
-Dimensions: 300/140/H320 mm
-Weight: 3.5 kg/piece
Clamping devices, clamps, deep clamping jaws, clamping pads, clamping tools, step clamps, low clamps, clamping irons, accessories
Nmjxf
-for T-slot: 48 mm
-Clamping height up to: approx. 350 mm
-Clamping depth: 120 mm
-Price: per piece
-Number: 5 pieces
-Dimensions: 180/100/H510 mm
-Weight: 4.2 kg
Clamping devices, clamps, deep clamping jaws, clamping pads, clamping tools, step clamps, low clamps, clamping irons, accessories
-for T-slot: 45 mm
-Clamping height up to: approx. 500 mm
-Clamping depth: 120 mm
-Price: per piece
Stea2g
-Number: 4 pieces
-Dimensions: 180/80/H650 mm
-Weight: 4.8 kg
Clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws
-Length: 315 mm
-Groove width: 25 mm
-Price: per piece
Bg33rxnhzj
-Number: 4 pieces
-Dimensions: 315/65/H40 mm
-Weight: 3.8 kg
Roll jaws, floating central jaws, pull-down jaws, machine vice jaws, clamping jaws
Nwyf9
-Tensioning tool: 270 mm
-Groove: 14 x 36 mm
-Dimensions: 270/20/H50 mm
-Weight: 2.0 kg
Clamping devices, clamps, deep clamping jaws, clamping pads, clamping tools
Gtqu3w
-Number: 4 pieces
-Clamping height: 95 mm
-Price: for 4 pieces
-Weight: 10 kg
Step claws, clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools
-Number: different sizes
Hht9t9lyq
-in a tool cabinet
-Dimensions: 800/720/H1050 mm
-Weight: 300 kg
Step claws, clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, clamping devices
-various: clamping heights
-Thread sizes: M24/M30
Qloyt9boi
-Price: complete
-Weight: 88 kg
Step claws, clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools
-Clamping heights: 15-240 mm
Qlnilasbg
-for: 12 mm groove width
-Number: 15x available
-Price: complete
-Dimensions: 500/320/H200 mm
-Weight: 30 kg
Clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws
-2 pieces: 18x125 mm
-2 pieces: 18x160 mm
-Price: complete
-Package
-Weight: 4.5 kg
Qlsr7ntg9
Pressurized water device up to 140 ° C
mould weight up to 1'000 kg
Equipment / Additional information:
Temperature control: self-optimizing microprocessor controller
Pjbld
With digital display of the setpoint and actual value.
Cooling capacity: 47000kcal / h at 120 ° C
Cooling system: indirect
Pump output: pressure operation max. 4.5 bar / max. 100L / min.
Suction operation vacuum max. 8mWS
Refilling: automatic with water filter
Volt: 3x380-400
Watt: 14100 Hz50
Further MACHINERY / SPARE PART...
diameter 90 mm
workpiece length beliebig mm
work piece width beliebig mm
Bürstendurchmesser 250 mm
Bürstenbreite 60 mm
voltage 380 V
frequency 50 Hz
power capacity 3 kW
weight of the machine ca. 0,1 t
dimensions of the machine ca. 1,0 x 0,6 x 1,2 m
This machine is well suited for burring of fore-parts
M8zbld
and side walls,
mounted on machine cupboard,
with accessory parts for short work pieces and plate edges,
Panel lifting clamp, sheet metal clamp, sheet metal claw, girder clamp, girder claw, sheet metal gripper, material gripper, material gripper
-Sheet metal claw
-Span width: up to 152 mm
-Load capacity: 2500 kg
-Number: 1x terminals available
-Price: per piece
89axt8x8j
-Weight: 29 kg/piece
Tempering units
Bwvtk39
Tool-Temp
TT-157 E
year ca2000
Large Mechanical Crank Press Upsetter available.
This press is designed to forge flanges on shafts, make big bolts and other big metal components in a single 2-second cycle.
Bsgbrboyic
Capacity: 1200 tons (main vertical crank), 600 tons (side-acting clamp)
Weight: 112 tons
Manufacturer: Coventry Machine Tool Co, England (Circa 1940's)
Cast steel frame. New bronze bearings in flywheel.
Currently installed and working, but MUST find a new home as soon as possible as land has been sold for developm...
High tip bucket with top clamp
Brand: Mylle
Type: MBG 220 RO
Year of construction 2016
Ex-demo
Iayu8psmq
Width 226 cm
Top clamp
2x cylinder
Gebout reverse knife
Ex Demo bucket
Stocknr.: UR0501
Power : water 90°C / mould weight up to 1'200 kg
oil 150°C / mould weight up to 600 kg
Equipment / Additional information:
Pump capacity: 4.5 bar
Cooling: indirectly
Temperature range: up to 150°C
Heating capacity: 6 kW
Cooling capacity: 45 kW at 90°C
Flow control: Yes
Temperature control: MP-888
7eiy8kr8g
Temperature Control Machine - Oil Cooler
Buoqkspgiv
Make Tool Temp
Type TT 5000 H
weight 150 kg
Data, see picture
Space requirement : L.1000 x W.370 x H.750 mm
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper
-with chain: 1.3 m
-Span width: 44 to 70 mm
B9i3nkck
-Load capacity: 6300 kg
-Dimensions: 300/460/H120 mm
-Weight: 30 kg
CNC Lathe SUT 126 NC
Btdh8kcjxo
Producer: ŠKODA MACHINE TOOL
YP: 1997
Control Siemens ... Sinumerik 840 C
Turning diameter ... 1000mm
Turning length ... 14500mm
Circumferential diameter over bed ... 1260mm
Swing diameter over support ... 1000mm
Distance between stand ... 14500mm
Max. Workpiece weight ... 20000kg
Max. Torque ... 63000Nm
The machine is in good condition and can be tested under power.
Zero point clamping system
Manufacturer: Vischer & Bolli VB tools
Year of manufacture: 2018
Condition: unused
System consisting of:
1 piece Dock Lock locking plate made of steel
size: 600x200x85/95 mm
with 2 pieces DockLock SAFE20 installation cylinder
up to 12,5 KN per cylinder
10 mounting holes for M16-Inbus
1 piece special base plate made of steel
size: 800x250x76 mm
1 piece DEUX-MILL clamp
1 piece special base plate made of aluminium
Size: 600x600x40 mm
...
for steel pipe:-approx. 300 mm
Wall thickness maximum approx.: 7 mm
Batuiwd3pj
Working speed:
Drive motor: 220 V, 1.5 kW
Space, with and without feet: 850 x 800 x 750/1400 x 1200 x 1400 mm
Weight:
The temperature control unit from Tool Temp was checked in the workshop;
- oil unit
- communication interface equipped
Brljrnyxd2
- Manual filling
Tempering units
Tool-Temp
Bjyznefvvf
TT-150 G
Year ca 1995
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper
-Span width: 19 to 38 mm
-Dimensions: 175/80/H440 mm
-Weight: 9 kg
Hdqmcg2
Sharpening TOOL VOLLMER FINZ 4-800
Location
Gorzow Wielkopolski.
Conditions of delivery
Pick your own
Md3zx
Cost of delivery
Client cover
startup type
negotiated
Description
Comments
GRINDING AUTOMATIC CIRCULAR SAW WIDIOWYCH THE HYDRAULIC
The driven tools for Duplomatic revolvers
are all in a very good condition.
For sale are 9 pieces axial and 9 pieces radial tools.
Oxdkl
Capacity: 3 t
Rydtbw7et
Opening width: 38 mm
Weight: 15 kg
The oil. Device from the company Tool Temp was checked in my workshop for function .
Brgbrmoiee
It has an interface
TOOL
Bdvpmna9ns
BJ 1988
Temp TT 162E
86 c.
138 bar - 8 output lines - flow rate 16 l/min -
motor 3.75 kW - weight 377 kg - 3 phase 400 V -
Blvqz8dp0e
type of coolant oil only
it was fitted to Star SR-20RIII
Sharpening TOOL Schonberger NURNBERG TKRS
location
Gorzow Wielkopolski.
Conditions of delivery
Pick your own
Cost of delivery
Client Cover
startup Type
negotiated
Wbirpx82p
description
Comments
GRINDING AND SAW tape Blades for circular saws and milling Dividing HAVE COMPLETE READY TO WORK
Radial drill press in good condition.
With motorized boom (Up / Down)
Morse taper 4
Travel on the boom: 725 mm.
Travel on spindle: 270 mm.
32 - 2500 rpm.
0.06 - 0.8 mm / rpm feed rate.
Spindle diameter: Ø65 mm.
Max height between table and spindle: 995 mm.
Bnxo2cb
Total dimensions: 180 x 85 cm.
Height: 248 cm. (Transport height: 228 cm)
A TT-156 E temperature control unit is available.
Details of the individual devices are listed below.
All devices are supplied with operating instructions.
Type: TT-156 E
Device no.: 93-2640
Power: 10100W
Capurfam
Temp. control: MP-694
This pump was located in a temperature control unit from the company Tool-Temp
Bjljfiz30z
Model TT157E
Here we offer a vacuum glass laminating line with 2 heaters.
Glass laminating plant, with 2 heaters
TOOL-TEMP
Model type TT-138b, S/N 310-1877-1, 310-1877-2
Laminating surface approx. 2,900 x 1,400 mm, with feeding table, stainless steel
Control Panel, surface approx. 2600 x 1,250 mm
Control tower PC, 17 "-LCD monitor ACER"
Model/type AL711, mouse, keyboard
The system consists of the following main components:
Vacuum chamber (Chamber + cover)
Pneum.-cover drive
Transport roller conveyor
Lifting ...
Type: TT-162 E
Biqowmldgi
Temp. control: MP-694
Catalog No. : 5012
Type: FNG 63 CNC
Producer: TOS
Made in: 1994
Characteristic:
Control system: Heindenhain TNC 415
Length of the working table: 1120 mm
Fntmz2ls0
Width of the working table: 630 mm
Minimum rotary speed of the vertical spindle: 20 1/min
Maximum rotary speed of the vertical spindle: 4000 1/min
Travel length X-axis (mechanical feed): 800 mm
Travel length Y-axis (mechanical feed): 500 mm
Travel length Z-axis (mechanical feed): 630 mm
Tool taper: ISO 40
Main motor output: 1...
Vertical turning lathe NILES DKZ2000 retrofitted and upgraded with CNC FANUC 0i-TF with tool magazin
Technical characteristics:
Maximum working diameter: 2.200 mm
Bed diameter: 1.800 mm
Maximum height of work piece under cross rail: 2.200mm
Vertical slide travel ( Z axis): 1.500mm
Feed range: 0.1 – 4.000mm/min
Tool magazine SCHIESS with 12 pockets: 1
Vertical main motor Fanuc: 37 kw AC
Rotation range in bed: 1 – 150 rot./min
Total weight of machine: 38.000 KG
Machine size: 3.600 x 4.700 x 7.20...
CNC tool milling machine make DECKEL type FP 3 NC
make # 2803-0335, year of construction 1983 with NC rotary table
technical data:
Travel X 400 mm
traverse path Y 315 mm
travel Z 400 mm
Clamping surface of the fixed angular table 460 x 700 mm
feed speed infinitely variable 4 - 2000 mm/min
rapid traverse for X,Y and Z 4 m/min
Spindle mounting SK 40
21 programmable speeds 31,5 - 3150 rpm
spindle drive 2 / 3 kW
electrical connection 380 V, approx. 14 kVA
weight 1800 kg
external dimensions L x W x H...
.
Bw3qdohsxd
Technical data :
Travels: X/Y/Z: 400 x 400 x 400 mm
24 spindle speeds: 30 - 2,240 rpm
spindle motor power: 1.8 / 2.7 kW
Angular table: 450 x 800 mm , large version
Spindle cone: SK 40 DIN 2080
Feed rates in all axes: 1-750 mm/min. infinitely variable
Rapid traverse: 1,500 mm/min.
Dimensions, W x D X H: 1,790 x 1,375 x 1,750 mm
Weight approx. 1,3 to
.
Machine complete with :
.
ACTIVE digital display HEIDENHAIN TNC 121
.
.....
