Used Sheet Metal Clamps for sale (40,035)

Condition: used, functionality: fully functional, Year of construction: 2011, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Jorns, controller model: CNC800, working width: 14,400 mm, throat depth: 1,000 mm, bending angle (max.): 144 °, bending radius (max.): 2 mm, bending radius (min.): 2 mm, type of crowning: manual, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 3 mm, sheet thickness stainless steel (max.): 2 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 4 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, back gauge travel distance Z-axis: 980 mm, overall weight: 16,000 kg, total length: 15,260 mm, total width: 2,775 mm, total height: 2,003 mm, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 45 A, input frequency: 50 Hz, type of input current: AC, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, Jorns AG is neither the owner nor the possessor of the machine. The machine is being offered for sale on behalf of the customer (based in Sweden). If you are interested, the owner’s contact information will be provided. Please find below some technical parameters of the machine: Type: SUPER-LINE-300S-1000-RH-SO-OV-CNC800-14.4-SHS-SPEZ Serial number: K11005 Year of manufacture: 2011 Insertion depth: 1000 mm Working length: 14,400 mm Bending capacity: 3 mm mild steel, 4 mm aluminum, 2 mm stainless steel Number of clamping arms: 18 units Number of linkages: 18 units, type 28 Number of bending cylinders: 18 units Number of clamping cylinders: 18 units Base construction: The machine is built from two pieces Control: CNC800 Backstop: Parallel backstop, type 91, built from two pieces, including six backstop fingers. Ljdpfxozk Dfpj Ahtohk Crowning: Manual crowning at every arm except the first and last Hydraulic system: Equipped with an axial piston pump, 130 l/min, 22 kW engine, max. 250 bar Condition of the machine Accuracy: The machine is in daily use and can be tested at the customer's site in Sweden. In its current condition, the machine achieves 90° +/- 2° bending results in 3 mm mild steel at full length using manual crowning. To increase the bending accuracy, all linkages would need to be replaced. The machine has the following defects: - The touch screen is defective. The machine is currently operated using a mouse. - The upper clamping tool has a dent that could be repaired on site by a Jorns technician. Service Jorns: We are happy to provide a quotation for new linkages, a new panel and support in installing the machine in another location.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, degree of automation: manual, overall weight: 1,370 kg, total length: 2,880 mm, total width: 1,450 mm, total height: 1,100 mm, warranty duration: 12 months, Equipment: documentation/manual, Metal Technics Polska Professional CNC machines, lasers, and metalworking equipment We are a manufacturer and importer of high-quality metalworking machines. We supply proven technologies from Poland, Europe, and Asia—used by hundreds of companies across Europe. For over 15 years, we have focused on quality, precision, and reliability. SHEET METAL BENDING MACHINE – SEGMENTED BENDING MACHINE 2.5 × 2040 Technical Specifications: Working width: 2040 mm Max. sheet thickness: 2.5 mm Bending angle: 0° – 135° Dimensions: 2880 × 1450 × 1100 mm Weight: 1370 kg Machine Description: Rigid and durable steel construction Ljdpfx Ajy Htk Nehtehk Long operating levers enabling high force transmission Segmented clamping fingers on upper and lower beam for flexible bending lengths Counterweights on operating levers to reduce effort Eccentric clamping system for secure sheet holding Upper and lower beam made of high-quality steel

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: 6.088.177.254, controller model: Durma DT-7, working width: 3,100 mm, sheet thickness (max.): 13 mm, overall weight: 11,800 kg, TECHNICAL DETAILS Max. sheet thickness: 13 mm Max. working width: 3,100 mm Overhang: 50 mm Design: Swing-beam Angle adjustment: Manual Shear gap adjustment: Motorized Back gauge type: Electric Back gauge depth: 1,000 mm Ledpfxozuwvvj Ahtjhk MACHINE DETAILS GENERAL Control system: CNC Controller: Durma DT-7 Drive type: Hydraulic Power: 30 kW Dimensions & Weight Dimensions (L x W x H): 4,200 x 2,350 x 2,350 mm Weight: 11,800 kg Transport packages: 1 unit EQUIPMENT CE marking Finger guard: Fixed with fold-up guard Table type: Ball-bearing table

Year of construction: 2022, condition: ready for operation (used), controller manufacturer: SIEMENS, table load: 3,000 kg, Automated sheet metal storage system manufactured in 2022. This TRUMPF Automated Sheet Metal Production System features a storage height of 7,900 mm and a maximum load per storage location of 3,000 kg. It includes 266 storage locations and supports sheet formats of 3,050 x 1,525 mm. If you are looking to get high-quality automated storage capabilities, consider the TRUMPF Automated Sheet Metal Production System we have for sale. Contact us for further details. • Storage system: STOPA Compact II • Type: Automated sheet metal storage system with chaotic storage management • Storage height: 7,900 mm • Sheet format: 3,050 x 1,525 mm • Maximum load per storage location: 3,000 kg • Number of storage locations: 266 • Total storage capacity: 798 t • Configuration: 8 sections/towers, up to 37 storage levels per section • Pallet format: GF 3050 x 1525 x 90 mm • Pallet types: SPO, SPMgl • Loading heights: 185 / 275 / 460 mm • Functions: Automatic material storage and retrieval; automatic material supply to connected production cells; storage interface for integrated production machines • Storage control • Server operating system: Windows Server 2022 • Central storage management and automated material flow management • Integration with TRUMPF production equipment • Connected production cells • TRUMPF TruLaser 5030 fiber (L76) • Machine type: CNC 2D fiber laser cutting machine • Working area: 3,000 x 1,500 mm • Laser source: TruDisk 6001, 6,000 W • CNC control: Siemens SINUMERIK 840D sl • TRUMPF TruMatic 6000 fiber • Machine type: Combined CNC punching and fiber laser cutting machine • Working area: 3,050 x 1,550 mm • Laser source: TruDisk 3001, 3,000 W • Maximum punching force: 180 kN • Linear tool magazine: 25 positions • TRUMPF TruBend Center 7030 (B34) – Cell 1 • Machine type: Automatic panel bending center • Max bending length: 3,123 mm • Max thickness: structural steel 3.0 mm; stainless steel 2.2 mm; aluminum 4.0 mm • Max box height: 220 mm • TRUMPF TruBend Center 7030 (B34) – Cell 2 • Same specifications as Cell 1 • System functionality (summary) • Central automated storage and retrieval of raw sheet material • Automatic supply of material to connected laser, punch-laser, and panel bending cells • Automatic transfer between storage and production stations • Centralized, high-capacity sheet handling • Main system configuration • 1 x STOPA Compact II automated sheet storage system • 1 x TRUMPF TruLaser 5030 fiber 2D laser cutting cell • 1 x TRUMPF TruMatic 6000 fiber punching and laser cutting cell Lhedozu Sugopfx Ahtsk • 2 x TRUMPF TruBend Center 7030 automatic panel bending cells Additional equipment • For TRUMPF TruLaser 5030 fiber (L76) • Automatic pallet changer • LiftMaster Compact 1530 (automatic loading and unloading) • STOPA storage connection/interface • For TRUMPF TruMatic 6000 fiber • SheetMaster 3000 x 1500 mm (automatic sheet handling) • GripMaster 3000 x 1500 mm • Storage system integration/interface • For TRUMPF TruBend Center 7030 (both cells) • 2-axis part manipulator • 5-axis rear stop • Rotary manipulator • ToolMaster Bend • Automatic loading and unloading • Storage interface • System-wide • Central storage management server (Windows Server 2022)

Condition: used, Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: ip, safety lifting clamp type IPSUNZ 6t with swiveling support ring -Clamp range: 32-64 mm Lodjkm Rn Iopfx Ahtjhk -Load capacity: 6 t -Number: 4x clamps available -Price per piece -Dimensions: 310/100/H420 mm -Weight: 24 kg/pc.

Condition: new, functionality: fully functional, Year of construction: 2026, bending angle (max.): 135 °, total length: 1,500 mm, total width: 350 mm, total height: 530 mm, warranty duration: 12 months, Manual Sheet Metal Bending Machine The bending machine allows the production of complex profiles and bends. Thanks to the segmental design, it is possible to perform advanced sheet metal forming operations. Our model features an improved construction – thanks to the simple and quick removal of segments, it is possible to bend channels, boxes and similar shapes. The segments on the upper beam are mounted with Allen screws. Tilting by means of a handle Upper clamping beam with a 45° apex angle Easy positioning of the upper clamping beam; removable segments for box bending The machine is equipped with a deflection compensation adjustment system (when bending thicker sheets it eliminates the so-called “banana effect”) Technical Specifications Working length: 1220 mm Maximum sheet thickness: 1.5 mm Lhedpjytfabjfx Ahtok Maximum opening height: 30 mm Bending angle: 0–135° Dimensions (L × W × H): 1500 × 350 × 530 mm Weight: 165 kg Segments: 5 × 50 mm / 6 × 76 mm / 5 × 102 mm SEGMENT SHEET METAL BENDING MACHINE 1220 × 1.5 MTP 165 KG Delivery Terms The machine is brand new 12-month warranty Warranty service Post-warranty service CE Declaration of Conformity Technical documentation (DTR) in English Delivery to the customer is possible. The delivery cost is determined individually based on the carrier’s quotation. If you are interested in other machines, we encourage you to visit our website.

Condition: used, Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: ip, safety lifting clamp type IPUZ with swiveling support ring -Clamping range: 0 - 25 mm Lsdpokm Rnyofx Ahtehk -Load capacity: 3 t -Number: 1x terminals available -Price per piece -Dimensions: 230/90/H380 mm -Weight: 16 kg/pc.

Condition: used, Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, plate gripper, lifting claw, lifting clamp, lifting clamp, crane clamp, roller clamp -Manufacturer: VEB TAKRAF, roller clamp type WSI -Clamp range: 35-70mm -Load capacity: 2000 kg Lhjdpfjir E Thox Ahtjk -Dimensions: 620/210/235 mm -Weight: 21 kg

Condition: used, Beam claw, sheet metal clamp, sheet metal claw, girder clamp, sheet metal gripper, material gripper, material gripper, section steel gripper, panel gripper, lifting claw, lifting clamp, support clamp, crane clamp -Manufacturer: Renfroe, sheet metal gripper lifting clamp type MPC2 -Clamping range: 30-60 mm -Load capacity: 2000 kg -Dimensions: 400/300/120 mm Ljdjhgkg Espfx Ahtshk -Weight: 9.3 kg

Condition: used, Carrier claw, sheet metal clamp, sheet metal claw, carrier clamp, sheet metal gripper, material gripper, material gripper, plate gripper, lifting claw, lifting clamp, screw clamp -Manufacturer: Seebeck, sheet metal clamp screw clamp type 76 -Clamping range: 20-40 mm -Load capacity: 12 t -Quantity: 2x clamps available -Dimensions: 330/90/H365 mm -Weight: 48 kg/pc. Lhsdpfop A A R Iox Ahtek

Condition: used, Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Span width: 0 to 100 mm -Load capacity: 1250 kg -Number: 4x sheet metal clamps available -Price: per piece Ledpfx Ajd I Sziohtohk -Dimensions: 300/310/H80 mm -Weight: 13 kg

Condition: used, Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Span width: 6 to 64 mm Lhedpfxsd I Szko Ahtek -Load capacity: 7 t -Dimensions: 300/460/H130 mm -Weight: 33 kg

Condition: good (used), Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: IP, Safety lifting clamp type IPUNZ with swiveling support ring -Clamping range: 0-32 mm Lhsdpfx Ahekm Rnvetok -Load capacity: 6 t -Number: 23 terminals available -Price: per piece -Dimensions: 280/100/H455 mm -Weight: 23 kg/pc.

Condition: used, Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, plate gripper -Sheet metal clamp: clamping range up to 85 mm -Load capacity: kg -Dimensions: 300/80 / H330 mm -Weight: 13 kg Lhodpfx Ahogtn Dbjtsk

Condition: used, Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, panel gripper, lifting claw, lifting clamp -Manufacturer: ip, safety lifting claw 6 IP -Clamping range: 0 - 40 mm -Load capacity: 6 t Lhsdpfx Ahjgtn Dfetsk -Dimensions: 250/110 / H550 mm -Weight: 26 kg

Condition: good (used), Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: ip, safety lifting clamp type IPU10/J with pivoting support ring -Clamping range: 50-100 mm -Load capacity: 9 t -Quantity: 1 piece available -Dimensions: 380/110/H460 mm -Weight: 35 kg Ledpfjkm Rm Asx Ahtjhk

Condition: used, Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, plate gripper -Sheet metal claw: clamping range up to 35 mm -Load capacity: 4 t Lhjdpfogtn Diex Ahtok -Dimensions: 230/110 / H450 mm -Weight: 22 kg

Condition: used, Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, panel gripper, lifting claw, lifting clamp -Manufacturer: Evers, lifting clamp IPHGZ -Clamping range: 0 - 25 mm -Load capacity: 1.5 t -Dimensions: 200/110 / H300 mm Lsdpfxsgtn D As Ahtshk -Weight: 8 kg

Condition: used, Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, plate gripper -Sheet metal claw: clamping range up to 30 mm -Load capacity: kg Ljdegtn Dxopfx Ahtehk -Dimensions: 250/100 / H460 mm -Weight: 20 kg

Condition: good (used), Carrier claw, sheet metal clamp, sheet metal claw, carrier clamp, sheet metal gripper, material gripper, material gripper, plate gripper, lifting claw, lifting clamp, screw clamp -Manufacturer: Seebeck, sheet metal clamp screw clamp type 76 -Clamping range: 8-32 mm -Load capacity: 8 t -Quantity: 1x clamps available -Dimensions: 275/80/H300 mm Lhsdpsp A A Rvofx Ahtjk -Weight: 30 kg

Year of construction: 2007, condition: used, Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, panel gripper, lifting claw, lifting clamp -Manufacturer: ip, sheet metal gripper lifting clamp IPHTONZ Ljdpjgtn D Hefx Ahtohk -Clamping range: 0 - 30 mm -Load capacity: 0.375 t -Dimensions: 115/80 / H170 mm -Weight: 2 kg

Condition: good (used), beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: Stahl Süssen, Sheet metal clamp: Lifting clamp type SGK -Clamping range: 0-20 mm Ledpfevgv Apox Ahtohk -Load capacity: 1000 kg -Dimensions: 190/75/H285 mm -Weight: 6.9 kg

Condition: good (used), Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: IP, Safety lifting clamp type IP 10 with swiveling support ring -Clamping range: 0 - 50 mm -Load capacity: 6 t Lhodpokm Rm Uofx Ahtjk -Number: 8 terminals available -Price: per piece -Dimensions: 300/100/H430 mm -Weight: 25 kg

Condition: good (used), Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: IP, Safety lifting clamp type IPUN with swiveling support ring -Clamping range: 0-40 mm -Load capacity: 9 t -Number: 7 terminals available -Price: per piece Lhedskm Rnnepfx Ahtjk -Dimensions: 300/110/H470 mm -Weight: 28 kg/pc.

Year of construction: 2026, condition: new, functionality: fully functional, # Sheet Metal Beading Machine ETB 40 – Metal Technics Polska ## Professional Sheet Metal Beading Machine The ETB 40 Sheet Metal Beading Machine is a robust and efficient machine designed for producing beads, grooves, flanges, reinforcing ribs, and other forming operations in sheet metal. Thanks to its heavy-duty construction, high precision, and a wide range of interchangeable forming rolls, it is ideal for metal fabrication workshops, HVAC duct production, sheet metal processing, and general industrial manufacturing. The machine enables fast and accurate production of repeatable profiles, improving productivity while maintaining excellent quality. ## Key Features * Maximum sheet thickness: 4 mm * Powerful 2.2 kW electric motor * Heavy-duty steel construction * 300 mm throat depth * Precise material guidance * Suitable for a wide variety of beading and flanging operations Lsdpfxezkubzo Ahtjhk * Quick and easy roll replacement * Ideal for HVAC, tanks, enclosures, and steel fabrication * High manufacturing quality * Machine available from stock ## Technical Specifications * Model: ETB 40 * Maximum sheet thickness: 4 mm * Roller width: 165 mm * Throat depth: 300 mm * Roller speed: 15.3 rpm * Motor power: 2.2 kW * Dimensions (L × W × H): 1550 × 510 × 1180 mm * Weight: 341 kg ## Applications The ETB 40 is ideal for manufacturing: * HVAC ducts and fittings * Air-conditioning components * Cylinders and tanks * Machine enclosures * Decorative sheet metal components * Flanges, reinforcing beads and stiffening profiles * Components for the automotive and steel fabrication industries ## Heavy-Duty Construction The machine is built on a rigid welded steel frame, ensuring excellent stability, high precision, and long service life even under intensive industrial use. ## Easy Operation The ergonomic design and intuitive controls allow fast roll changes and quick machine setup for different forming operations. This makes the ETB 40 suitable for both small workshops and high-volume production. ## Transport & Technical Support We organize machine transportation throughout Europe as well as to countries outside the European Union. Every transport quotation is prepared individually based on the delivery destination. We provide professional technical advice, warranty and after-sales service, and ongoing technical support from our specialists. Customers are also welcome to collect the machine directly from our warehouse in Sokołów Podlaski, Poland. ## Why Choose Metal Technics Polska? For many years, Metal Technics Polska has been supplying high-quality metalworking machinery to customers across Europe. We provide complete support—from technical consultation and machine selection to transportation, commissioning, and long-term after-sales service. If you would like to receive a quotation or learn more about this machine, please contact our sales team. Visit the Metal Technics Polska website to explore our complete range of sheet metal working machines and discover our latest products and promotions.