Used Clean Pool for sale (6,809)

Condition: new, Year of construction: 2018, Behncke SFA 600B AFM with TLS - with filter material - slight storage marks - shipping possible at extra cost Kdodpow U Su Iefx Aabeu

Condition: good (used), total width: 1,950 mm, total length: 4,350 mm, total height: 2,100 mm, Immersion tank from Oswald featuring: - lifting bottom, - hold-down device, Kedsvyy T Sjpfx Aabodu - control cabinet with timer control, etc.

Year of construction: 2009, condition: ready for operation (used), Floor area: 46.25m², air flow: 1000m³/h, relative humidity: 25-35%, length: 8500mm, width: 5000mm, height: 3341mm, with documentation. Kdjdpfx Aajpcgy Robsu

Condition: new, The AL-KO CLEAN VAC central vacuum units are the ideal solution for direct extraction from handheld processing machines and as central vacuums for cleaning entire workshop or production areas. Wherever high suction power is required or long piping runs need to be bridged, AL-KO CLEAN VAC units are the perfect solution. Applications: - Extraction for handheld processing machines, e.g. in joineries, grinding shops, training workshops - Cleaning vacuuming of floors and machines in workshops, production areas or warehouses - Direct extraction at small diameters such as filling stations, dosing systems, etc. Advantages: - High suction power up to 25,000 Pa negative pressure Kjdpewwt Aajfx Aabsdu - Perfect plug & play: fully pre-assembled at the factory. Fully operational after connecting power and compressed air - 100% air recirculation via M-class dust filters (residual dust < 0.1 mg/m3) with optional H13/H14 post-filter stage - Attractive appearance and additionally weatherproof - Low-noise operation thanks to sound-insulated and powder-coated housing - Easy handling: set up, connect, immediately ready for operation at the customer’s site

Condition: used, Year of construction: 2003, With waste transport trolley Width: 1000 mm Height: 2770 mm Depth: 1500 mm Condition: used Kdedpfxjw Iql So Aabju

Condition: excellent (used), mileage: 2,78,960 km, first registration: 06/1995, fuel type: diesel, axle configuration: 4x2, tire size: 275/70 R22.5, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, Year of construction: 1995, TRANSPORT TO ANTWERP 590 EURO = More information = Tire size: 275/70 R22.5 Suspension: leaf spring Front axle: steered Empty weight: 7,160 kg Dimensions (L x W x H): 620 x 250 x 320 cm Pump: Yes Technical condition: very good Visual condition: very good Kjdpfx Ajw Rgiroabedu Reference number: 57

Condition: new, Clean Air Filter Type: Power Unit 300 P Offer Type: New Machine Technical Specifications: Motor Power: 7.5 kW / 3-Phase / 400 V / 50 Hz Intake Port: NW 300 mm Nominal Flow Rate: 5,089 m³/h Max. Flow Rate: 6,000 m³/h Valve Pressure at Vnom: 2,434 Pa Filter Area: 30 m² Compressed Air Cleaning Incl. Integrated Pre-Separator Incl. Integrated Automatic Extinguishing System Chip Collection Volume: 3 x 250 l Sound Pressure Level: 71 dB(A) Incl. Dust Partition Ksdshfmpxepfx Aabodu Dimensions L x W x H = 3,000 x 1,058 x 2,361 mm Weight: 838 kg

Condition: excellent (used), Year of construction: 2019, suction capacity: 1,100 m³/h, negative pressure: 3,200 Pa, Mobile welding fume extraction, dust extraction, self-cleaning, pneumatic, vacuum filter from KEMPER. Kjdstq E Siepfx Aabsdu For welding, grinding and all types of dry dust. Self-cleaning welding fume filter with contamination-free dust collection. The mobile KEMPER MaxiFil Clean cartridge filter is designed for continuous operation for the filtration of welding fumes and highly concentrated dust. Suitable for use with all welding methods for carbon, low-alloy and high-alloy steels and aluminium. Economical in operation thanks to the long service life of the filter element. Thanks to the IFA-W3 approval, the basic filter can be used for welding high-alloy steels. Parameters: Efficiency - 1100 m3/h Max negative pressure 3200 Pa Three-phase fan with a power of 1.5 Kw Filtration surface - 15 m2 Year of production - 2019 Patron Filter Insert with PTFE membrane Purification degree - > 99.97 % Preliminary spark separator. Built-in delay time regulator in start-stop mode. In the case of connecting a start-stop sensor (optional), the delay time of extraction after the welding process can be set to 5-60 seconds The device is in very good condition. Several pieces available. The price in the advertisement is for 1 piece.

Condition: ready for operation (used), Year of construction: 2014, Flow rate: 48,000l/h, flocculant: WINfloc 7418 CF, max. capacity reaction tanks: 4160l, control: PLC 7/15 inch, connected load: 6kW, length: 2180mm, width: 2500mm, height: 3100mm, with documentation, on-site inspection is possible. Kjdpfxoru Hvis Aabsdu

Condition: new, The powerful, mobile welding fume extractors AL-KO CLEAN UNIT F are the ideal solution for extracting welding fumes during manual welding, at automated welding stations, or with welding robots. Function: The welding fumes generated at the welding site are captured via extraction arms and hoods, among other means, and conveyed through a duct to the inlet of the AL-KO CLEAN UNIT F. In a large pre-separation chamber, coarse particles are first separated out. The subsequently arranged filter cartridges of dust class “M” filter out the remaining fine dust particles. During extraction operation, the differential pressure-controlled filter cleaning system removes adhering particles from the filter cartridges. Venturi nozzles on the filter cartridges maximize the cleaning efficiency, ensuring consistently high suction power and a long filter service life. A volumetric flow monitor continuously controls the required suction capacity and issues a warning if the nominal value is undercut. The collected dust is gathered in an easily mobile container. The cleaned air is recirculated into the room via the top of the unit. Applications: - For all welding applications with unalloyed or low-alloyed steel - Usable as extraction at individual welding stations and at duct systems with several extraction points - Extraction at fixed-position hoods and welding tables Advantages: - Consistently high suction power thanks to an efficient fan and long-life cleanable filters - Extremely quiet due to high-performance sound insulation - Suitable for individual welding stations and for connection to duct systems - IE3 motors for high energy efficiency - Wide performance range Kjdewwkvqopfx Aabjdu - Optional accessories for various welding applications

Condition: used, Year of construction: 2007, With waste transport trolley Width: 1000 mm Height: 2550 mm Depth: 1500 mm Condition: used Kjdpsw Ivk Hsfx Aabodu

Condition: excellent (used), mileage: 3,55,670 km, power: 360 kW (489.46 HP), gearing type: mechanical, fuel type: diesel, tire size: 295/80 R22,5, axle configuration: 8x4, first registration: 04/1987, brakes: retarder, suspension: other, Year of construction: 1987, Equipment: retarder, = Additional Options and Accessories = - Electric windows - Power steering - Radio/CD player - Sun visor = Notes = TRANSPORT TO ANTWERP 590 EURO = Further Information = General Information Cab: Day Reference number: 15 Axle Configuration Tyre size: 295/80 R22.5 Front axle 1: Steered; Suspension: parabolic springs Front axle 2: Steered; Suspension: parabolic springs Rear axle 1: Dual tires; Suspension: leaf springs Rear axle 2: Dual tires; Suspension: leaf springs Dimensions Dimensions (L x W x H): 780 x 250 x 295 cm Weights Empty weight: 12,500 kg Payload: 20,500 kg gross vehicle weight: 33,000 kg Functional Cargo area dimensions: 525 x 220 x 115 cm Tipper: Rear Condition Kdjdpew Rf Exofx Aabou Technical condition: very good Visual condition: very good

Condition: new, SCHUKO Vacomat 140/160 XPe clean air extraction system - Exhibition unit - Filter generation motorized, mobile, extraction side right or left, can be remounted Kdedpfxou R Szye Aabeu ----- Technical data ----- Test mark: H3 / BGHM HO 193023, Extraction nozzle Ø: 1 x 140 / 160 mm, Nominal volume flow: 1,447 m³/h, max. negative pressure: 2,200 Pa, Filter area: 9.5 m², Residual dust content: < 0.1 mg/m³, Number of bags: 1 piece, Motor: 2.2 kW, Dimensions (LxWxH): 1,665 x 900 x 1,980 mm, Weight: 306 kg, Dust class M: AWN 16 - new exhibition machine -

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CLEANROOM - ISO 8 | Cleanroom requirements ISO Class 8 | ISO Cleanroom Class 8 | Cleanroom classification. In order to achieve an ISO 8 air purity class in a Cleanroom, several levels of air filtration are usually used (e.g. G4 pre-filter, F9 filter, H13 final filter). Air movement in the room is non-unidirectional (there is a mixing of "clean" air supplied to the room with "dirty" air present in the room). Air vents in the ISO 8 room are placed on the walls. The required number of air exchanges per hour will depend on the nature of the activities conducted in the room and the number of personnel present, but the goal could be to provide 10-40 air exchanges/hr. In ISO Class 8, personnel are often present continuously. Employees may be dressed in standard work attire and visitors in a disposable apron. It is recommended to maintain a minimum overpressure of the room relative to the adjacent zone of 5-10 Pa. Kdedoq H H Ruepfx Aabsu Requirements for equipment and materials intended for Clean Room with ISO air cleanliness class 8 (maximum average amount of particles released when: number of samples taken = 100; measurement performed in accordance with ISO 14644-14 in a cleanliness class at least one better than the purpose of the device; number of particles/m3) Detailed description in photos. Technical drawings attached to photos. Description of ventilation The purpose of the ventilation installation performed was to achieve the following air parameters in the Clean Room. The installation was made with the GBD PHARMA 2000 system, meeting all the requirements for 'clean rooms' in the highest classes of air purity. Parameters for the installation: a. Air purity - ISO 8. b. Temperature 19-23 st C c. Humidity max 38%. a. To ensure the required purity of the supplied air, an air handling unit manufactured by DOSPEL with a maximum capacity of V= 3500 m3/h [up to 15 air changes per hour] was used. The air handling unit is equipped with pocket filters : pre-filters FK EU5/EC2 and fine filters FK-EU9/EC2. In addition, HEPA 11 filters made by EUFILTER were used in diffusers located in the ceiling. Data sheets in point H6. As a result , with a measured flow rate of 3264 m3/h, an ISO 7 [class "C"] cleanliness class of the room was obtained in the resting state, and thus an ISO 8 [class "D" ] cleanliness class for the working state. b. The temperature range of 19-23 deg C is for the enlarged cooler and chiller to be freely maintained with 25% fresh air. c. In order to achieve in summer conditions with high temperatures of 30 deg C and humidity of 80%, a freon chiller of 31.4 kW and a chiller of 33.5 kW of cooling power were used. The chiller is made by FUJITSU supplied by Klimatherm Gdansk. The room is automatically regulated overpressure in relation to the external pressure - the pressure difference at the door : 15 Pa The automation of ventilation allows for "economical" mode , in which the installation works in a closed circuit and an overpressure of 15 Pa is maintained. Technical data attached to the photos.

Year of construction: 2002, condition: ready for operation (used), Basket diameter: 790mm, usable height: 500mm, loading height: 930mm, max. basket load: 300kg, liquid volume: 150l, pump capacity: 1.5kW, heating capacity: 6kW, machine dimensions X/Y/Z: approx. 1200mm/1000mm/1200mm, weight: approx. 220kg. Documentation available. On-site inspection is possible. Kedswg E Aqopfx Aabsdu

Condition: new, Equipment: dust extraction, For all industrial processes where dust and coarse particles are generated, the clean air dust extractors of the AL-KO CLEAN UNIT D series are the right choice. Thanks to their powerful fans and highly effective filter cartridges, these mobile extraction units ensure clean air in metalworking as well as in the plastics, food, and chemical industries. Functionality: Dust and coarse particles are extracted directly at the machine or via capture hoods and conveyed through a suction line to the inlet of the AL-KO CLEAN UNIT D. In a generously dimensioned pre-separation chamber, coarse particles are separated. The downstream filter cartridges of dust class 'M' filter out the remaining fine dust particles. The differential pressure-controlled filter cleaning system removes adhering particles from the filter cartridges even during continuous operation. Venturi nozzles on the filter cartridges enhance the cleaning effect, ensuring consistent suction power and a long filter service life. The collected dust is gathered in an easily maneuverable container with an integrated collection bag, enabling low-dust disposal. The purified air is returned to the workspace via the top of the unit. Applications: - Direct extraction of dust and chips Kdedpfx Aswwkrfeabsu - Suitable for single or multiple workstations - For connection to machines, extraction tables, booths, and ducting - For metal and plastics processing and many other industries - For grinding, polishing, filling processes, and more Advantages: - High suction performance due to an efficient fan and cleanable filters with a long service life - Suitable for a wide range of applications - Extremely quiet thanks to highly effective sound insulation - IE3 motors for high energy efficiency - Plug-and-play

Condition: used, für Fruchtsaft geeignet; mit und ohne Fruchtfleisch; kalte Füllung, Ultra Clean Leistung 12.000 Flaschen / Stunde; Füllungtemp 2-5 C°; mit Rinser 40 stellig mit Füller 40 Ventile mit elektronischem Durchflussmesser Schraubverschließer 8 stellig für 38mm Kunststoffverschluss Teilung 113,1 mm; Durchmesser 1440 mm; Laufrichtung im Uhrzeigersinn; Kjdpfx Aaewm R Rajbedu installierte Leistung 14 kW; Gasdruck 8-12 bar; Luftdruck 6-8 bar; Wasserdruck 3-4 bar; elektrisch Anschluss 380 V; 50 hz; mit Schaltschrank

Condition: excellent (used), mileage: 1,65,944 km, fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, first registration: 01/1988, driver cabin: day cab, suspension: steel, tire size: 205/75 R16C, number of seats: 2, Year of construction: 1988, TRANSPORT TO ANTWERP 390 EURO Kdsdpfx Aaew Iqycjbeu = Further information = Transmission: 5-speed, manual transmission Tire size: 205/75 R16C Suspension: Leaf spring suspension Front axle: Steered Curb weight: 3,900 kg Dimensions (L x W x H): 550 x 215 x 285 cm Technical condition: very good Visual condition: very good Reference number: 46

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 2433345525, Suction nozzle 125 mm Nominal volume flow 884 m³/h motor power 2,2 kW 16A mobile weight approx. 194 kg Ksdpfx Aasiw D U Njbodu LxWxH: 1000 x 840 x 1650 mm tank size 730 x 660 mm manual shaking

Year of construction: 2005, operating hours: 15,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 15.01.174, Mobile unit for the maintenance and cleaning of coolant lubricant in CNC machining centers. Using pressure relaxation flotation, foreign oils, suspended solids, and oxygen deficiencies in the emulsion are effectively eliminated. The unpleasant odor caused by aged, contaminated emulsions is reliably prevented. The service life of the coolant lubricant is significantly extended! The unit is portable and can be moved from machine to machine. A demonstration onsite is possible. Technical Data Capacity: 150 - 300 l/h Operating temperature: 50 °C Working range: pH 6 - 11 Return height: max. 0.7 m Suction and return hose length: 3 m Work tank: 60 l / stainless steel (V2A) Waste tank: 60 l / stainless steel (V2A) Kedswr D Ayepfx Aabedu Power supply: 230 V / 50 Hz / 0.15 kWh Power cable length: 5 m Dimensions (L x W x H): 575 x 500 x 1300 mm Weight: 68 kg

Condition: good (used), 200 pcs. Euro-Pool pallet cage purple used Used goods, see pictures. Outside dimensions 1.240 x 835 x 970 mm Kjdpfjp Dt N Eox Aabsdu Internal dimensions 1,200 x 800 x 800 mm Load capacity 1000 kg Tare weight 98 kg Load capacity 5,000 kg Color purple The front side is hinged. One half can be opened from above, the other half can be opened from below (see pictures). Price: € 89.00 net per piece from stock From 10 pieces - price: € 85.00 net per piece from stock From 40 pieces - price: € 79.00 net per piece from stock Goods are in stock. Transportation and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale reserved! See our GTC, all prices excl. VAT ex stock)

Condition: new, Holzprofi Maker clean air extraction system with double chip filtration. The first cleaning works via a cyclone, the second cleaning via a filter cartridge. Kdodpfovrv Agsx Aabeu Includes remote control. Nominal volume flow 1350 m³/h Negative pressure V/min 2000 Pa Filter area 2.6 m² Extraction nozzle 150 mm Branch 150/100/100/100 Motor rated power 1.5 kW 400V Chip collection volume 160 liters Dimensions 1250 x 650 x 1750 mm Weight 89 kg

Condition: excellent (used), Year of construction: 2003, total height: 2,950 mm, total width: 1,350 mm, total length: 3,300 mm, Complete clean air extraction system with briquette press and piping with sliders etc. Extraction system for woodworking companies with a briquette press underneath. Extraction system ALKO Type: MOBIL-JET 250 Year of manufacture 2003 Extraction diameter 250 mm Rated output 4900 m³/h Motor output 6.5 KW Dimensions approx. 330 x 135 x 2.95 cm With extraction control for automatic slider control. Briquette press WEIMA/ALKO Type: APC30S Year of manufacture 2007 Motor output 5.5 KW Pressing capacity 30 - 50 kg/h Briquette diameter approx. 50 mm Incl. complete piping with branches, bends, sliders. Ksdpfevr S Ncox Aabedu There is another item of suction pipes with fittings available that can be purchased cheaply. The system has been dismantled and packed ready for loading. See pictures for condition, or refer to the item description. Parts can also be picked up yourself. All dimensions are approximate. All information is provided to the best of our knowledge but without guarantee. Subject to prior sale. The items can be picked up yourself or shipping is at the buyer's expense. Shipping costs are a guideline and may vary depending on distance and unloading options. The stated sales price is the net final amount plus VAT. An invoice with VAT identification will be issued.

Condition: excellent (used), mileage: 4,96,677 km, power: 103 kW (140.04 HP), first registration: 05/2000, fuel type: diesel, number of seats: 34, gearing type: mechanical, axle configuration: 4x2, suspension: parabolic leaf (spring), tire size: 235/75, Year of construction: 2000, Equipment: ABS, = Additional options and accessories = - Leaf suspension Kdsdpfswzb Hzox Aabeu - Radio/CD player = Notes = TRANSPORT TO ANTWERP 590 EURO = Further information = General information Number of doors: 3 Reference number: 35 Axle configuration Tyre size: 235/75 Suspension: Parabolic suspension Front axle: Steered Rear axle: Twin tires Dimensions and weights Unladen weight: 3,295 kg Dimensions (L x W x H): 850 x 250 x 235 cm Condition Technical condition: very good Visual condition: very good

Condition: new, Euro-Pool mesh box 800 x 1200 mm New, see pictures. Outer dimensions 1,240 x 835 x 970 mm Internal dimensions 1,200 x 800 x 800 mm Load capacity 1500 kg Dead weight 70 kg Load capacity 6,000 kg Color grey Stacking height nested 20 Stacking height un-nested 5 according to UIC standard 435/3 The front side is hinged. One half can be opened from above, the other half can be opened from below (see pictures). Kdodpfx Aediyhxeabou Price: € 149,00 net per piece from stock From 50 pieces - Price: € 129,00 net per piece from stock Larger quantities on request Goods are in stock. Transportation possible on request. Viewing possible at any time by appointment. Further information on request. (Changes and errors in the technical data, information and prices as well as and prices as well as prior sale reserved! See our AGB, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for or offering numerous items from various areas swept clean business premises business liquidations Fast - flexible - ready to move! We also clear and or dispose of for liquidators. Write to us with a few keywords and we will get back to you as soon as possible. To get to our site, please click on our logo!