Used Formwork Cleaning for sale (6,382)

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 35 h, functionality: fully functional, total width: 87 mm, total length: 120 mm, maximum load weight: 200 kg, heating capacity: 7.2 kW (9.79 HP), tank capacity: 400 l, warranty duration: 24 months, type of input current: three-phase, inner dimension height: 600 mm, inner dimension length: 800 mm, inner dimension width: 500 mm, overall weight: 150 kg, input voltage: 400 V, input frequency: 50 Hz, workpiece weight (max.): 200 kg, LCT NW 180 BSS demonstration tank Dual frequency 27/80 kHz Ventilated stainless steel control cabinet Hinged lid Tank completely insulated Stainless steel washing cork with four crane eyes and a basket bar for lifting Four adjustable feet for uneven floors Nodpeq Rd R Dsfx Aa Uswk Floor emptying via ball with inclined tray base for complete emptying Floor grating Bottom and 2 x side sound with a total output of 3000 watts Timer with timer and program control Connected load 10.2 KW

Condition: new, Year of construction: 2025, Technical Specifications: Njdpfx Aajzkkc Us Uowk Laser Power: 2kW Laser Type: Continuous Fiber Laser Laser Source: MAX Adjustable Cleaning Length: 0 – 300 mm Approximate Cleaning Speed: 10 – 60 m2/hour Laser Wavelength: 1070 nm Output Power Stability: ± 2% Laser Cooling System: Included (with antifreeze) Power Supply: 220V 50Hz Machine Power: ≤ 9.5kW Operating Environment Temperature: 10 – 40°C Operating Environment Humidity: < 70% (No condensation) Laser Head Cable Length: 10 m Machine Dimensions (L x W x H): 1,000 x 650 x 950 mm Weight: 230 kg CE Certification: Included

Condition: used, Year of construction: 2010, fuel type: diesel, power: 88 kW (119.65 HP), gearing type: mechanical, color: white, number of standing places: 3, Equipment: 3rd hydraulic function, ABS, airbag, all-season tires, lighting, trailer coupling, I am offering a Peugeot Boxer diesel panel van, 2.2 / 88 kW, first registered in July 2010, with 171,000 km, a 6-speed manual transmission, and a trailer hitch. It is being sold because I am switching to different technology. Nwsdpfxozwmfrs Aa Ujk !The vehicle does not have a valid MOT (technical inspection), is registered, and is ready to drive. It has green license plates! The vehicle is equipped with a belt-driven auxiliary drive and a Dynaset HPW hydraulic high-pressure water pump. It includes a high-pressure cleaning system up to 180 bar, a high-pressure lance, a 1000-liter tank, and automatic hose retraction. Signs of wear are present.

Condition: like new (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 105-337, Machine for cleaning the corners of PVC profiles. Nodpfxjzdqage Aa Uewk

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Industrial self-cleaning disc filtration system manufactured by CHEMIPOL. The unit was installed as part of a reverse osmosis water treatment plant and was used for water pre-filtration. Nsdpfjzvlm Ejx Aa Uswk The system is equipped with eight TW-type disc filter units operating in parallel. Automatic cleaning is controlled by a Siemens PLC with an HMI operator panel. TECHNICAL DATA Manufacturer: CHEMIPOL Model: TW8P2L3 Equipment type: Self-cleaning disc filtration system Number of filter units: 8 Filter type: TW disc filters Configuration: Parallel operation Cleaning system: Automatic self-cleaning Pressure monitoring: Two pressure sensors measuring inlet and outlet pressure Control system: Siemens PLC Operator interface: HMI touchscreen Application: Water treatment and reverse osmosis pre-filtration

Condition: excellent (used), Year of construction: 2012, URBAN welding and cleaning line consisting of two 4-head URBAN AKS 6410 welding machines, including an automatic conveyor belt running perpendicular to the welding machines, with a URBAN SV 800/2 automatic corner cleaning machine with two heads and an infeed/outfeed table. Nwodpfozu S Exox Aa Ujk Operated in single-shift production, in very good condition, programmed for VEKA profiles. Includes welding supports, safety fences, and tools for the automatic corner cleaning machine. WINDOWS-based control system, network compatible. Product capacity: at least 200 frames/sashes in 8 hours.

Year of construction: 2002, operating hours: 200 h, condition: good (used), functionality: fully functional, Due to closure, everything must go at bargain prices: Nedpfx Aezut R Nea Uewk 1 Thomas sawing machine, used for 1 year, with table and spare parts. 1 small Italian sawing machine, 4 meters long. 1 high-end vacuum lifting device, large model, used for 6 months. 1 digital molding machine. 1 dust extraction table. 1 dust extraction cabinet. 1 dust extraction system with articulated arm. 1 screw compressor. Come and see or request videos via WhatsApp.

Condition: ready for operation (used), Year of construction: 2016, Brand: HAKO Model: Scrubmaster B650 Year of manufacture: 2016 Capacity: 3200 m²/h Scrubbing width: 65 cm Drive: 24V Clean water tank: 72L Dirty water tank: 74L Njdpszwliijfx Aa Uowk Internal charger, 220 volts.

Condition: good (used), Year of construction: 2007, power: 9.1 kW (12.37 HP), Manufacturer: Ilsa Multimatic Type: Topline 320 Designation: Cleaning machine Nedpfow I Ddhjx Aa Uewk Distillation module: VD160 Tank volume: 320 L Spin speed: 550 rpm Power: 9.1 kW Year of manufacture: 2007

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Special equipment: automatic oil skimmer Technical data Heatable for aqueous cleaning agents. For the removal of oil and grease contamination in the shortest possible time. Universally applicable for the fully automatic cleaning of small parts from production, manufacturing, and maintenance, such as bolts, sleeves, and ball bearings. 2129905 Easy operation thanks to the fully automatic cleaning process. This allows skilled workers to concentrate on other important tasks. The washing tank is filled with a mixture of water and a water-soluble IBS special cleaner (washing solution). The contaminated parts to be cleaned are placed in the rotating washing basket, and the lid is closed. After setting the desired washing temperature and time, the device is switched on, and the solution in the tank is heated. In the closed device, the basket rotates around its own axis at a constant speed. The pump unit draws the washing solution from the washing tank and pumps it through 3 stainless steel nozzle tubes with overlapping flat jet nozzles. The parts to be cleaned are intensively blasted with the hot solution from all sides during the uniform rotation of the motor-driven basket. After the cleaning process is completed, the device switches off automatically. ∙∙ 1 pump arranged vertically ∙∙ 3 three-dimensional nozzle tubes made of stainless steel ∙∙ robust stainless steel design ∙∙ additional small parts cleaning basket made of stainless steel (Ø 170 mm) ∙∙ rotating washing basket made of stainless steel, gear rim drive via separate motor ∙∙ intake filter in front of the pump shaft ∙∙ high spray pressure ∙∙ fume extraction ∙∙ stainless steel sieve plate with filter basket ∙∙ low water level protection W x D x H (closed): 1130 x 1010 x 1150 mm W x D x H (open): 1130 x 1220 x 1730 mm Usable height: 500 mm Load capacity: 150 kg Basket diameter: 780 mm Washing tank capacity: 85 liters Pump pressure: 3.1 bar Nedpfxozwb Eao Aa Ujwk Spray rate: 4800 L/h Power consumption: 4.8 kW / 400 V / 50 Hz Weight: 90 kg Temperature: 0-60°C

Condition: like new (used), Year of construction: 2024, functionality: fully functional, It is an semi-automatic machine fitted for small parts cleaning by Ultrasonic. Nedpfx Ajzvh E Rsa Uowk

Condition: used, Year of construction: 2007, machine/vehicle number: 506 8026 / 479 6312 / 7028, functionality: fully functional, input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,500 mm, workpiece width (max.): 2,500 mm, workpiece height (max.): 160 mm, number of axes: 4, actuation type: electric, overall weight: 3,000 kg, Equipment: documentation/manual, For sale: a complete, functional, and production-used welding and cleaning line from Rotox, manufactured in 10/2007. The line was used at EUROCOLOR for the production of PVC windows and doors (Schüco and Rehau profiles). Working direction: right to left (the right beam, from the welding machine's side, is a fixed beam). The line includes: ● Rotox SMK 506 4K four-head welding machine ● Rotox EPA 479 automatic corner cleaning machine (four-axis, CNC) with WT 427 rotating station ● FIMTEC cooling station Photos and documents are available at this link: 1. Rotox SMK 506 4K four-head welding machine ● Year of manufacture: 10/2007, machine number: 506 8026 ● Fixed side of the machine: right (working direction from right to left) ● Profile arrangement on the table: outer side of the window facing down Nedpfx Aaezp Nz Tj Uswk ● Weld bead allowance: 6 mm ● Flash control: 0.2–2.0 mm, automatically adjustable knives from above and below (used at approximately 0.2 mm) ● Maximum welding dimension: 2500 x 2500 mm (in practice, frames were welded up to approximately 2650 x 2650 mm) ● Minimum welding dimension: 320 x 420 mm, with automatic transport ● Frame welding: min. 350 x 500 mm – max. 2500 x 2400 mm ● Welding of U and T profiles and door frames (C-type welding) ● Heated knives for controlling the weld bead ● Quick replacement of Teflon film ● Machine safety fencing ● Data acquisition system from the welding machine ● Operating counter: approximately 385,000 welding cycles ● Manufacturer's specifications: maximum connection power 10 kW, voltage 400 V, current 20 A, 50 Hz, air pressure 6–7 bar, air consumption approximately 150 NL/weld, profile height 45–160 mm, maximum profile width 140 mm, weight approximately 3000 kg. Material processed: PVC profiles 2. Rotox EPA 479 automatic corner cleaning machine + WT 427 rotating station ● Year of manufacture: 10/2007, cleaning machine number: 479 6312 ● WT 427 rotating station connected to EPA 479: machine number 7028, dimensions 5700 x 2500 mm, transport direction to the right ● Fixed side of the machine: right ● Profile arrangement on the table: outer side of the window facing down ● Maximum dimensions of processed frames: 2500 x 2500 mm ● Unit for drilling holes for Siegenia and roto hinge hardware – unit with a six-spindle head, pneumatic drive ● Hole drilling for hinge: 4 x Ø3 mm, 2 x Ø6 mm (according to technical drawing) ● Equipment: 2x unit for cutting the visible surface, 2x second unit for cutting the visible surface, 2x CNC unit for cleaning under the seal (pneumatic drive), unit for cutting the inner surface vertically (sash bar), unit for cutting the angled surface up to 23° with an additional bevel/arc (chisel cleaning), unit for cutting the inner surface horizontally, tools for internal processing, 170 mm contouring blade (right), grooving knives S=3.0 mm/G=0.5 mm (2 pcs.), knives for flat trimming without a groove (2 pcs.), extension cable for the control panel ● Operating counter: approximately 9,863,552 cleaned corners ● Note: Precise minimum dimensions of profiles and welds that can be cleaned in manual/automatic mode – to be confirmed directly with Rotox Polska 3. FIMTEC cooling station ● Year of manufacture: approximately 2021–2022 ● Purchased from GRAF Machines are functional, disassembled – not currently in operation – prepared for transport. Contact: EUROCOLOR Sp. z o.o. ul. Toszecka 47, 44-120 Pyskowice Machines are functional and ready for inspection and demonstration before purchase. Disassembly

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CLEANROOM - ISO 8 | Cleanroom requirements ISO Class 8 | ISO Cleanroom Class 8 | Cleanroom classification. In order to achieve an ISO 8 air purity class in a Cleanroom, several levels of air filtration are usually used (e.g. G4 pre-filter, F9 filter, H13 final filter). Air movement in the room is non-unidirectional (there is a mixing of "clean" air supplied to the room with "dirty" air present in the room). Air vents in the ISO 8 room are placed on the walls. The required number of air exchanges per hour will depend on the nature of the activities conducted in the room and the number of personnel present, but the goal could be to provide 10-40 air exchanges/hr. In ISO Class 8, personnel are often present continuously. Employees may be dressed in standard work attire and visitors in a disposable apron. It is recommended to maintain a minimum overpressure of the room relative to the adjacent zone of 5-10 Pa. Requirements for equipment and materials intended for Clean Room with ISO air cleanliness class 8 (maximum average amount of particles released when: number of samples taken = 100; measurement performed in accordance with ISO 14644-14 in a cleanliness class at least one better than the purpose of the device; number of particles/m3) Detailed description in photos. Technical drawings attached to photos. Description of ventilation The purpose of the ventilation installation performed was to achieve the following air parameters in the Clean Room. The installation was made with the GBD PHARMA 2000 system, meeting all the requirements for 'clean rooms' in the highest classes of air purity. Parameters for the installation: a. Air purity - ISO 8. b. Temperature 19-23 st C c. Humidity max 38%. a. To ensure the required purity of the supplied air, an air handling unit manufactured by DOSPEL with a maximum capacity of V= 3500 m3/h [up to 15 air changes per hour] was used. The air handling unit is equipped with pocket filters : pre-filters FK EU5/EC2 and fine filters FK-EU9/EC2. In addition, HEPA 11 filters made by EUFILTER were used in diffusers located in the ceiling. Data sheets in point H6. Nwedoq H H Ruepfx Aa Uok As a result , with a measured flow rate of 3264 m3/h, an ISO 7 [class "C"] cleanliness class of the room was obtained in the resting state, and thus an ISO 8 [class "D" ] cleanliness class for the working state. b. The temperature range of 19-23 deg C is for the enlarged cooler and chiller to be freely maintained with 25% fresh air. c. In order to achieve in summer conditions with high temperatures of 30 deg C and humidity of 80%, a freon chiller of 31.4 kW and a chiller of 33.5 kW of cooling power were used. The chiller is made by FUJITSU supplied by Klimatherm Gdansk. The room is automatically regulated overpressure in relation to the external pressure - the pressure difference at the door : 15 Pa The automation of ventilation allows for "economical" mode , in which the installation works in a closed circuit and an overpressure of 15 Pa is maintained. Technical data attached to the photos.

Condition: refurbished (used), Year of construction: 2004, operating hours: 22,000 h, functionality: fully functional, machine/vehicle number: 014404, total width: 2,600 mm, total length: 1,750 mm, total height: 2,350 mm, maximum load weight: 50 kg, tank capacity: 230 l, compressed air connection: 6.5 bar, input voltage: 380 V, year of last overhaul: 2026, Hösel Solvacs-2 with additional distillation unit. Nwedezln Iqopfx Aa Usk The system and the distillation unit have both undergone a professional general overhaul. The system is connected to the power supply and is ready for inspection and a test run. The system requires external cooling.

Condition: used, Year of construction: 2016, Coolant cleaning system Manufacturer: Zyklomat Type: ZKR 14/350 Year of construction: 2016 For cleaning grinding emulsions Supply of max. approx. 250 L/min. at approx. 3.5 bar water Transfer to the filter system is carried out by the customer, air and foam-free. Temperature max.: 50°C Cleaning capacity: 350 L/min. Recirculation from clean tank to dirty tank: 100-350 L/min. Machine supply max.: 250 L/min. Filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3 Separation particle size: approx. 5 µm Medium: Emulsion 3-6% Operating temperature: Ambient temperature Solid particles: approx. 5.14 m3 Operating volume max.: approx. 4.58 m3 Operating volume min.: approx. 3.60 m3 Process flow: Fully automatic full-flow filtration Sludge discharge: Fully automatic, with consistent consistency The dirty liquid is fed via customer-provided lift stations. The swarf and fine sludge produced during grinding (grinding debris, scale, corundum) are discharged via a scraper conveyor. In the upper scraper section, the sludge is pre-dried. Filtration takes place via ZYKLOMAT high-performance hydrocyclones. The system runs fully automatically. Maintenance: annual maintenance Nsdpfx Aajzwccms Uswk Availability: 10-2026 Double scraper tank for discharge of grinding sludge Type: KR 1.75-5.1 Total volume: approx. 5.14 m3 Volume max.: approx. 4.58 m3 Length: approx. 4,000 mm, including 70 mm stiffening Width: approx. 1,890 mm, including 140 mm stiffening Height: approx. 1,105 mm, including 100 mm base profile Neck height: approx. 2,300 mm Theoretical discharge volume max.: 15 kg/h Function: Coolant tank with integrated clean tank, sedimentation and flotation tank with fully automatic sludge discharge. 1 Bevel gear motor Voltage 400 V, 50 Hz, IP 54 as scraper drive 3 connection nozzles for return lines from three machines 1 clean liquid tank, integrated at the rear into the scraper tank. Oil-tight welded, with an internal, circumferential bevel gear, various cover plates (non-walkable plates screwed onto an angle frame), without ladder, without handrail, without internal rungs Volume max.: approx. 0.55 m3 25826

Condition: used, Year of construction: 2008, input voltage: 380 V, type of input current: three-phase, input current: 8 A, We are offering this used elumatec EV 884 corner cleaning machine, manufactured in 2008. Nwedpfxozk Eahs Aa Ujk Type: EV 884 Serial number: 88009009 Rated voltage: 380 V Frequency: 50 Hz Number of phases: 3-phase Rated current: 8 A Date of manufacture: 28.11.2008 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, heating capacity: 3 kW (4.08 HP), overall weight: 300 kg, input voltage: 380 V, year of last overhaul: 2026, Two-stage machine: the first stage uses ultrasonic cleaning, and the second stage is for rinsing without using the ultrasonic function. Nodpfjzt Riasx Aa Ujwk

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: Fabr. / Serien Nr. Co2122, operating hours: 6,250 h, total length: 7,500 mm, total width: 2,500 mm, total height: 4,000 mm, overall weight: 6,000 kg, Equipment: cooling unit, Manufacturer: Laborex Cleaning Technology Nwedpfxjzi E S Us Aa Usk Mfg. / Serial No. Co2122 Cleaning system with 3 chambers, including pre-cleaning and post-cleaning. The system is completely insulated with stainless steel.

Condition: used, machine/vehicle number: XL9HP520004009032, axle configuration: 1 axle, Year of construction: 2005, High-pressure flushing and cleaning trailer mounted on a chassis, manufacturer: Rioned B.V., Tilburg (NL), type: UniJet, year of manufacture: 2005, serial number: XL9HP520004009032, pump type: P-30 SP-6115. Nwedpezvu Thjfx Aa Uek

Year of construction: 2021, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC S7-1500, total width: 2,035 mm, total height: 2,215 mm, product length (max.): 2,200 mm, number of axes: 3, This 3-axis clean CELL 3220 was manufactured in 2021. It features a powerful 600 W diode-pumped solid-state laser with a wavelength of 1064 nm and an integrated water-to-water cooling system. The machine is equipped with a Siemens control unit and a robust ABB robot for enhanced automation. If you are looking to get high-quality laser cleaning capabilities, consider the Clean Laser clean CELL 3220 machine we have for sale. Contact us for further details. • Machine Type: Automated Robotic Laser Cleaning Cell • Laser Source: cleanLASER CL600 Mid-Power Laser • Laser Type: Diode-Pumped Solid-State Laser (DPSSL) • Laser Wavelength: 1064 nm • Laser Operation Mode: Pulsed (ns) • Average Laser Power: 600 W ±5% • Alignment Laser Wavelength: 658 nm • Alignment Laser Power: 28 mW • Cooling System: Integrated Water-to-Water Cooling System • Additional Chiller: Cooler ONE Plus Air (Air-Cooled) • Fiber Cable Type: Quartz Fiber Optic Cable • Fiber Length: 10 m • Fiber Geometry: Square • Protective Hose Diameter: 21 mm • Optical System: STAMP 25 2D Optics • Optics Connection: 90° • Focal Length: 163 mm • Control Unit Brand: Siemens • Control Unit Model: SIMATIC S7-1500 PLC • Drive System: Siemens 1FK7 Servo Drives • Linear Axis System: 3-Axis Portal System • Maximum Axis Payload: Approx. 25 kg • Axis Speed (X/Y): >200 mm/s • Communication Interface: Profinet • Digital I/O: Standard • Software: cleanSTUDIO / cleanCONTROL • Industrial PC: 19" Rack PC • SSD Capacity: 256 GB • RAM: 8 GB • Processor: Intel Core i5 (minimum) or equivalent • Robot: ABB Robot • Gripper: 2-Workpiece Gripper • Conveyor System: Bosch TS2 Transfer System Nsdpfxszuy Ine Aa Uswk • Loading System: Manual Workpiece Carrier Loading • Discharge Conveyor Length: Approx. 4.8 m • Extraction System: ULT Maxi Plus • Fan Capacity: Max. 4,000 m³/h • Maximum Pressure: 3,300 Pa • Filter Cartridges: 4 × 600 mm • Dust Drum Capacity: 200 L • Extraction Power: 5 kW • Power Supply: 400 V, 3-Phase

Year of construction: 2019, condition: excellent (used), 2-tank metalparts-cleaning machine usable length: 800 mm usable width: 600 mm usable hight: 400 mm loading capacity: 150 Kg. volume of washing-tank: 1.100 Ltr. volume of flush-tank: 1.100 Ltr. Nodpjzndnljfx Aa Uewk

Year of construction: 2019, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC HMI, total width: 2,035 mm, total height: 2,215 mm, product length (max.): 2,200 mm, number of axes: 6, This 6-axis CleanLASER cleanCELL 3220 CL600 was manufactured in 2019. It features a powerful 600 W Q-switched fiber laser, designed for automated laser cleaning and surface treatment of metal components. The system includes a 6-axis industrial robot and a fully aligned beam path for precision cleaning. If you are looking to get high-quality automated laser cleaning capabilities, consider the CleanLASER cleanCELL 3220 CL600 machine we have for sale. Contact us for further details. • Machine Type: Automated Robotic Laser Cleaning Cell • Application: Automated Laser Cleaning / Surface Treatment of Metal Components • Laser Source: cleanLASER CL600 • Laser Type: Q-switched Fiber Laser • Average Laser Power: 600 W • Wavelength: 1064 nm • Laser Class: Class 4 (Laser Source) • Complete System Classification: Laser Class 1 • Laser Optics: STAMP 25 • Scanner Type: 2D Scanner • Working Scan Field: Approx. 65 × 65 mm • Objective Lens: f = 163 mm • Red Positioning Laser: Yes • Pulse Frequency: Variable • Beam Delivery: Fully Aligned Beam Path • External Fiber Length: Approx. 8 m • Door Interlock Connection: Yes • Remote Diagnostics: TCP/IP / USB • Fieldbus Interface: Profinet • Software: cleanSTUDIO • Telediagnostic Software: CLL Remote Diagnostics • Robot Type: 6-Axis Industrial Robot • Robot Programming: Teach Mode • Robot Gripper: Single Part Gripper • Loading System: Manual Loading • Conveyor System: Bosch T2 Carrier System Njdpfx Aozuy Stsa Uswk • Buffer System: Multiple Workpiece Carriers • Unloading: Automatic Conveyor • Conveyor Length: Approx. 2 m • Workpiece Carrier: Not Included • Designed Workpiece Types: 2 • Machine Footprint (W × D × H): Approx. 2,035 × 2,200 × 2,215 mm • Machine Frame: Welded Steel Base Frame • Cell Construction: Aluminium Profiles • Work Table: Aluminium T-Slot Plate • Front Door: Folding Door • Electrical Cabinet: Integrated Double Cabinet • Cabinet Width: 1,200 mm • Cabinet Depth: 800 mm • Cooling Requirement: External Water Cooling (

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, Elumatec VS 750 four-head welding machine with EV850 4-axis CNC cleaning line. The welding machine and cleaner are currently programmed only for SCHÜCO profiles. Profile height range for welding: 30-185 mm Minimum window dimensions for welding: 350 x 350 mm Maximum window dimensions for welding: 2600 x 4000 mm Weld bead limitation: 0.2 mm and 2 mm The welding machine features a touch operator panel based on Windows XP The cleaner is also equipped with an operator panel Online connection is available between the welding machine and the cleaner Nwedsx E Rd Djpfx Aa Usk After welding, automatic transport to the cleaner is provided The cleaner operates in both manual and automatic mode In automatic mode, the rotation station turns the window to each specific corner to be processed by the cleaner. We provide assistance with machine disassembly and loading for transport.

Condition: used, Year of construction: 2010, 4-head welding machine Nwodpozv S Eujfx Aa Usk Automatic corner cleaning machine

Condition: like new (used), Year of construction: 2011, functionality: fully functional, type of input current: three-phase, input frequency: 50 Hz, temperature: 60 °C, load capacity: 250 kg, SUMMA DC3/OSK rotating basket, rotating drum cleaning equipment, Carousel degreasing machine with dryer. The chamber rotary machine of the Czech manufacturer operates on the principle of pressure spraying. The degreasing machine offers three surface cleaning combinations. The machine is suitable for surface degreasing of a wide range of materials. Manufacturer: SUMMA DC3/OSK Year of manufacture: 2011 Max. workpiece size: 770x500mm Max. workpiece weight: 250kg Electr. Power: 23kw Bath temperature: Max. 60°C Air temperature: Max. 120°C Bath (rinsing) heating: 12/6kw Drying air heating: 13.5kw Aerosol pressure: 0.28Mpa Pump performance: 70 liters/minute Machine weight: 520kg Machine dimensions: 1800x1800mm Height: 1500mm Nwjdpowty H Dofx Aa Usk If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.