Used Cnc for sale (8,664)

Condition: used, turning length / mm control / centre height / mm MAZAK SUPER QUICK TURN 15M-Y MARKII CNC lathe Travel distances X-axis: 180 mm Y-axis: 100 mm (± 50 mm) Z-axis: 620 mm Spindle Speed range: 35 – 5,000 rpm Power Hjdpoyukidsfx Agwofd Motor power: 15 kW (approx. 20 hp) Equipment/accessories Extensive accessory package (see images) Various tools and holders Additional accessories included in delivery as shown in the image

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: R7 A-Q-2701, Used CNC lathe Manufacturer: EMCO Model: Hyperturn 665 Year of manufacture: 2002 Control: 840 D Hfjdpfx Asx Tbcysgwod With chip conveyor

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 27364, Used CNC gear hobbing machine Manufacturer: PFAUTER Model: PE150 Year of manufacture: 1989/2009 Hodpfx Ageyiylqowjfd Control: Siemens 840D

Condition: reconditioned (used), Year of construction: 2007, MAZAK QUICK TURN NEXUS 200-II MSY Max. turning diameter: 380 mm Max. machining length: 511 mm Max. milling speed: 4,500 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm Machine is equipped with: - CNC control Mazatrol Matrix - KITAGAWA three-jaw chuck for main spindle, diameter 210 mm - KITAGAWA three-jaw chuck for secondary spindle, diameter 169 mm - Tool Eye - C-axis Hfedeyhwy Iepfx Agwsd - C-axis on sub-spindle - Y-axis - Interface for bar loader magazine - Automatic parts catcher - Reinforced coolant pump - Chip conveyor - 8 stationary tool holders - 2 driven tool holders

Condition: good (used), Year of construction: 2003, operating hours: 18,538 h, functionality: fully functional, machine/vehicle number: 431, overall weight: 7,000 kg, total width: 2,000 mm, total length: 11,000 mm, total height: 1,900 mm, controller manufacturer: TRAUB, controller model: SYSTEM TX 8i, TRAUB TNK 36 CNC Automatic Lathe - Operating voltage: 460 V - Frequency: 50 Hz - Connection power: 33 kW - Rated current: 56 A Main spindle: - Bar capacity: 36 mm - Max. speed: 6,300 rpm - Drive power at 100/40% duty cycle: 6.7/10.7 kW - Torque at 100/40% duty cycle: 21/32 Nm Upper tool turret: - Number of tooling stations: 12 - X-axis travel: 50 mm - Y-axis travel (option): ±20 mm - Z-axis travel: 100 mm - Rapid traverse X/Y/Z: 15/15/15 m/min - Position feedback resolution X/Y/Z: 0.0005/0.001/0.001 mm - Thrust force X/Y/Z: 4,240/4,240/4,240 N Front unit: - Number of tooling stations: 5 - Diameter: 40 mm Hsdpjyh Ivlsfx Agwefd - Spacing: 54 mm - X-axis travel: 370 mm - Z-axis travel: 250 mm - Rapid traverse X/Y: 30/30 m/min - Thrust force X/Z: 2,800/2,120 N - Position feedback resolution X/Z: 0.0005/0.001 mm Rear unit: - Number of tooling stations: 5 - Diameter: 40 mm - Spacing: 54 mm - X-axis travel: 73 mm - Y-axis travel: ±50 mm - Rapid traverse X/Y: 15/15 m/min - Thrust force X/Z: 4,240/4,240 N - Position feedback resolution X/Z: 0.0005/0.001 mm - Including all tool holders shown in the photos, as well as a chip conveyor and coolant system by Resy, and a bar loader by FNB, model: TURBO 5-42. Attention: The item must be collected bindingly on a to-be-agreed appointment between 01 and 02 April 2026. FCA D-79115 Freiburg – loaded onto truck

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 344, overall weight: 7,000 kg, total width: 2,000 mm, total length: 11,000 mm, total height: 1,900 mm, controller manufacturer: TRAUB, controller model: SYSTEM TX 8i, TRAUB TNK 36 CNC Automatic Lathe - Operating voltage: 460 V - Connection power: 33 kW - Rated current: 56 A Main spindle: - Bar capacity: 36 mm - Max. speed: 6,300 rpm - Drive power at 100/40% duty cycle: 6.7/10.7 kW - Torque at 100/40% duty cycle: 21/32 Nm Upper turret: - Number of tooling stations: 12 - X-axis travel: 50 mm - Y-axis travel (option): ±20 mm - Z-axis travel: 100 mm - Rapid traverse X/Y/Z: 15/15/15 m/min - Scale resolution X/Y/Z: 0.0005/0.001/0.001 mm - Input force X/Y/Z: 4,240/4,240/4,240 N Front unit: - Number of tooling stations: 5 - Diameter: 40 mm - Spacing: 54 mm - X-axis travel: 370 mm - Z-axis travel: 250 mm - Rapid traverse X/Y: 30/30 m/min - Input force X/Z: 2,800/2,120 N - Scale resolution X/Z: 0.0005/0.001 mm Rear unit: - Number of tooling stations: 5 - Diameter: 40 mm - Spacing: 54 mm - X-axis travel: 73 mm - Y-axis travel: ±50 mm - Rapid traverse X/Y: 15/15 m/min - Input force X/Z: 4,240/4,240 N - Scale resolution X/Z: 0.0005/0.001 mm - Includes the tool holders shown in the photos, a chip conveyor and coolant system from manufacturer Resy, as well as a bar feeder from manufacturer FNB, type: TURBO 5-42 Note: The item must be collected by binding appointment between April 1st and 2nd, 2026, on a date to be mutually agreed upon. FCA D-79115 Freiburg – loaded onto truck Hsdpfxsyh Hkze Agwjfd

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 6060304, overall weight: 10,000 kg, total width: 2,000 mm, total length: 11,000 mm, total height: 2,400 mm, controller manufacturer: TRAUB, controller model: SYSTEM TX 8i-S, TRAUB TNL 32/7 CNC Lathe - Operating voltage: 400 V - Rated current: 73 A - Maximum fuse: 63 A - Rated power: 46 kW - Frequency: 50 Hz - Main spindle, motor spindle including hollow clamping system - Max. bar capacity: 32 mm - For clamping device diameter: 49 mm - C-axis max. speed: 8000 rpm - Max. stroke: 305 mm - Upper turret X/Y/Z and H-axis: 10 tool stations with dual drive - Lower turret X/Y/Z and H-axis: 9 tool stations with total drive and separate sub-spindle drive - Sub-spindle including partial hollow clamping - Max. clamping diameter: LW 32 mm: C-axis, speed: max. 8000 rpm - Flushing unit mounted on the lower turret - Part length: max. 350 mm - Diameter: max. 32 mm - Incl. chip conveyor and coolant system from manufacturer RESY as well as a bar feeder from manufacturer FNB, type: TURBO 3-36 - Incl. all tools and tool holders shown in the photos Note: The item must be collected definitively between 01 and 02 April 2026 at an exact date to be agreed. Hfjdpfjyh Hgcjx Agwsd FCA D-79115 Freiburg – loaded onto truck

Condition: good (used), Year of construction: 2014, operating hours: 42,000 h, functionality: fully functional, machine/vehicle number: AZ0238, turning length: 400 mm, turning diameter: 250 mm, travel distance X-axis: 180 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,400 mm, total length: 4,000 mm, total width: 2,000 mm, overall weight: 8,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, SPINNER TC 300 52 SMCY CNC Lathe - Operating voltage: 400 V - Frequency: 50/60 Hz - Rated current: 35 A - Maximum swing diameter: 300 mm Hsdeyh Iryjpfx Agwefd - Y-axis travel: +45/-30 mm Spindle 1: - Maximum speed: 5,000 rpm - Spindle power: 15 kW - Torque: 95 Nm Spindle 2: - Maximum speed: 7,000 rpm - Spindle power: 6/7.8 kW - Turret number of tools: 12 - Tool holder: VDI 25 - Including live tools: 12 - Maximum speed: 6,000 rpm - Including chip conveyor Note: The item must be collected on a binding appointment between 01 and 02 April 2026 to be coordinated. FCA D-79115 Freiburg – loaded on truck

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Hfjdpfsyufqpjx Agwjd Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: used, Year of construction: 2006, functionality: fully functional, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Hedsyuflgjpfx Agwofd Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600 4 driven axial tool holders 2 driven radial tool holders

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 163101 € 3082.61 € 2000x6000 mm Hypertherm XPR 170 CORE 60 mm 38 mm 38 mm 35 mm 22 mm 25 mm 170 A 12 m/min 35 m/min +/- 0,1 mm Hfsdpfx Aswiq Hajgwod 0,1 mm 6000 kg HyPerformance plasma power sourceHyperthermXPR 170 COREWITH "TRUE HOLE" TECHNOLOGY Automatic gas console Plasma torch height control Collision protection (torch brake away system) CNC control with Aurora Software Lantek CAD/CAM software with auto nesting Control of filter unit by CNC Remote control diagnostic by Ethernet Cutting plate alignment function User manual in GERMAN or ENGLISH Options: Suction with filter Morepricefor Optimix instead of Core Further options as CNC bevel head, drilling head, oxyfuel torch, Durma cloud etc. on request.

Condition: like new (used), Year of construction: 2023, operating hours: 21,000 h, functionality: fully functional, As-new machine / demonstration model. Available for immediate delivery. Technical data provided upon request only. Machine cannot be exported outside the EU. Hfsdpfx Agjyuqtiswod Gleason 300 PS – Technical Specifications General Information Manufacturer: Gleason-Pfauter Maschinenfabrik GmbH, Ludwigsburg Model: 300 PS Machine type: CNC power skiving machine Machine no.: XXXXX System no.: XXXX Year of manufacture: 2023 Commissioned: 01/2024 Application Machining of skiveable profiles on cylindrical workpieces Suitable for internal and external gearings on cylindrical gears Designed for both soft and hard machining Current usage: Machining of hardened workpieces At time of inspection: Internal gear cutting Control / Spindles / Tool Interface Control unit: Siemens Sinumerik 840 D solution line Tool spindle speed (C2): 2,990 rpm Grinding spindle speed / sharpening unit (C3): 12,000 rpm Tool holder: HSK B125 Machining Area Internal workpiece diameter: 40 to 300 mm External workpiece diameter: up to 450 mm Electrical Data Power consumption: approx. 100 kVA Operating voltage: 400 V AC / 50 Hz Dimensions / Weight Dimensions (L×W×H): approx. 3,900 × 5,700 × 5,400 mm Weight: approx. 11,000 kg net Operating Data Machine ON hours: 21,635 h Total cycle time: 10,373 h Equipment / Components Integrated re-sharpening unit with axes +A3, +C3, +X3 Integrated swing gripper Hydraulic unit Chip conveyor Coolant chiller with filter and centrifuge Workpiece carrier conveyor system PS 800 M Year of conveyor system: 2020 Miscellaneous CE marking available

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min Hedpfx Agswym Nfewofd C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: like new (used), User surplus stock E ARIAXIS i-500 AT730 30 HSK tool magazine (n/a Euchner) NP326 5-axis machining package for SmoothX MO084 Manual pulse generator (wired/detachable) NO442 B) G00 slope constant NO600 B) Cylindrical interpolation SF060 Scale feedback system X, Y & Z axis NO123 F) Tool radius compensation/5 axis SR534 Spindle speed 18,000rpm (HSK n/a Euchner) PL083 Signal tower (3 colour lights) NO091 B) Synchronised tapping MB269 RMP600 radio-type touch probe CV546 Preparation for chip conveyor (right) NO610 Work setting error compensation XXX Laser Mill Tool Measurement (NC4/ with airblast) Hjdpfx Ageynwxfewsfd O_2354hng Chip Conveyor, Local Manufacture (with transporter / ICON-P)

Condition: good (used), Year of construction: 2012, operating hours: 8,568 h, functionality: fully functional, machine/vehicle number: H-TV8HO37, turning diameter: 256 mm, spindle speed (max.): 4,800 rpm, travel distance X-axis: 203 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 19 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,200 mm, total length: 3,600 mm, total width: 2,300 mm, overall weight: 4,000 kg, bar passage: 51 mm, operating hours of spindle: 2,999 h, Equipment: documentation/manual, HURCO TM 8 CNC Lathe - Swing diameter over bed: 525 mm - Swing diameter over cross slide: 300 mm - Spindle nose: A2-6 - Chuck: hydraulic 3-jaw chuck, 203 mm diameter - Chuck through-hole: 52 mm - Max. bar capacity: 51 mm - Collet: CR60A6 - Positioning accuracy: 0.01 mm - Repeatability: 0.005 mm - Minimum input increment: 0.002 mm - For further technical data, please refer to the images - Supplied with technical documentation - Including mobile tool cabinet with various chuck jaws, tool cabinet dimensions: 800 x 600 x 1150 mm - With CD data carriers – contents: documentation and WINMAX manuals - For operating hours, please refer to the image (may still increase slightly as the machine is still in operation) - A tool holder package is included in the scope of delivery Note: The item must be collected definitively between 27.04. and 30.04.2026 at a date to be mutually agreed. Hodpfx Agoytntwewefd FCA D-39126 Magdeburg – loaded onto truck

Condition: good (used), Year of construction: 1999, Ref. -No.: 10638 Manufacturer: TOS HULIN Type: SKA 12 CNC Year of construction: 1999 Type of control: CNC Control: Sinumerik 840 C Storage location: Halberstadt Country of origin: Czech Republic Turning Diameter: 1450 mm Turning Height: 1450 mm Tool Taper: SK50 Power Capacity: 60 kW Planar disk: 630 RPM Planar disk: Ø 1250 mm Head Magazine: 30 academic subject Plate magazine: 24 academic subject Further information: - Hydraulically operated power chuck - Drive for rotary tools - Third controlled C-axis - Heidenhain linear scales in X and Z - Chip conveyor and extraction system Hodpoytqy Tofx Agwefd - Renishaw for tool control The machine can be viewed under power by arrangement.

Condition: used, Year of construction: 2009, max. workpiece length 4500 mm profile spindle 1 Stück main drive 20 kW Control Siemens Weinig Conturex 2 C 114 ----- Working width: 40-260 mm Working height: 25-110 mm 2 x PowerGrip clamp tables, 2 x 2280 mm ----- Workpiece length 200 - 4,500 mm Workpieces over 2,700 mm in length are machined using a repositioning cycle. Hodswunwyspfx Agwjfd Main spindle 1: ----- Motor with brake 20 kW HSK 63F Electronically adjustable speed 2,000-18,000 rpm Maximum tool length from flat surface HSK 63 F: 290 mm With C-axis Tool magazine: ----- Number of pockets: 30 mm Pitch between pockets: 100 mm Permanently installed multi-spindle drilling head ----- For horizontal and vertical drilling and milling work without tool changes ----- Price ex-site Prices for disassembly and loading onto customer trucks Transport within Germany and abroad as well as reassembly Commissioning and, if required, new profiles are available upon request! Used tools included (drawings available upon request): ----- Wood: IV 68, 78, 88, opening inside and out, with hinged weatherboard Wood-aluminum: IV 68/68, 78/78, 87/68, 97/78 Lift-and-slide doors IV 68 and 78 Front doors IV 68 and 78 Pivot windows Corner connection: counter/dowel Technical specifications according to the manufacturer - no guarantee! Detailed technical description available upon request!

Year of construction: 2011, condition: ready for operation (used), - USED- 2-AXIS CNC LATHE MAX ROTATING DIAMETER: 330 mm MAX TURNING LENGTH: 450 mm MAX TURNING DIAMETER: 200 mm BAR CAPACITY: 51 mm SPINDLE: 5000 rpm; 11-16,5 kW X-AXIS TRAVEL: 160 mm Z-AXIS TRAVEL: 450 mm DRIVEN TURRET HEAD: 12 POS CONTROL UNIT: SIEMENS 810D WEIGHT: 3400 Kg OVERALL DIMENSIONS: 4325 x 2071 x 1742 mm ACCESSORIES: SWARF CONVEYOR Hjdpfoyry S Aex Agwjfd

Year of construction: 2011, condition: ready for operation (used), - USED- 2-AXIS CNC LATHE MAX ROTATING DIAMETER: 330 mm MAX TURNING LENGTH: 450 mm MAX TURNING DIAMETER: 200 mm BAR CAPACITY: 51 mm SPINDLE: 5000 rpm; 11-16,5 kW Hedpfx Aoyry S Njgwsfd X-AXIS TRAVEL: 160 mm Z-AXIS TRAVEL: 450 mm DRIVEN TURRET HEAD: 12 POS CONTROL UNIT: SIEMENS 810D WEIGHT: 3400 Kg OVERALL DIMENSIONS: 4325 x 2071 x 1742 mm

Year of construction: 2018, condition: ready for operation (used), - USED- 2-AXIS CNC LATHE Hfjdpfx Ajyry R Esgwed MAX ROTATING DIAMETER: 420 mm MAX TURNING LENGTH: 291 mm MAX TURNING DIAMETER: 320 mm SPINDLE: 3200 rpm; 7,5-11 kW X-AXIS TRAVEL: 190 mm Z-AXIS TRAVEL: 350 mm RAPID FEEDS X-Z: 24 - 30 m/min TURRET HEAD: 12 POS CONTROL UNIT: FANUC 0i-TF WEIGHT: 3500 Kg OVERALL DIMENSIONS: 2214 x 2220 x 2713 mm ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL NOTE: WITH 16-POSITIONS GANTRY-TYPE LOADING SYSTEM

Year of construction: 2012, condition: ready for operation (used), - USED - 3-AXIS CNC LATHE DISTANCE BETWEEN CENTRES: 520 mm MAX ROTATING DIAMETER: 500 mm MAX TURNING LENGTH: 335 mm MAX TURNING DIAMETER: 200 mm BAR CAPACITY: 52 mm SPINDLE: 6000 rpm; 15-20 kW; 95-127 Nm X-AXIS TRAVEL: 190 mm Z-AXIS TRAVEL: 335 mm RAPID FEEDS X-Z: 30 m/min DRIVEN TURRET HEAD: VDI30 ; 12 POS; 5000 rpm; 5,4-18 kW Hedpfxsyry Sce Agwsfd CONTROL UNIT: SIEMENS 840D WEIGHT: 3800 Kg OVERALL DIMENSIONS: 4260 x 1710 x 1825 mm ACCESSORIES: FUME EXHAUSTER ; SWARF CONVEYOR ; TOOL SETTER

Year of construction: 2012, condition: ready for operation (used), - USED - 3-AXIS CNC LATHE DISTANCE BETWEEN CENTRES: 520 mm MAX ROTATING DIAMETER: 500 mm MAX TURNING LENGTH: 335 mm MAX TURNING DIAMETER: 200 mm BAR CAPACITY: 52 mm SPINDLE: 6000 rpm; 15-20 kW; 95-127 Nm X-AXIS TRAVEL: 190 mm Z-AXIS TRAVEL: 335 mm Hsdpfx Aoyry Sisgwjfd RAPID FEEDS X-Z: 30 m/min DRIVEN TURRET HEAD: 12 ; VDI30 POS; 5000 rpm; 5,4-18 kW CONTROL UNIT: SIEMENS 840D WEIGHT: 3800 Kg OVERALL DIMENSIONS: 4260 x 1710 x 1825 mm ACCESSORIES: FUME EXHAUSTER ; SWARF CONVEYOR ; TOOL SETTER

Condition: used, Year of construction: 2024, CNC plasma cutting machine Manufacturer: Microstep Model: MasterCut Compact 3001.15P Year of manufacture: 2024 Working area: 1,500 x 3,000 mm 1 x plasma torch with Kjellberg Q1500 plasma source with automatic O² gas console (O², N²) 1 x TEKA filtration unit for outdoor installation Hodpfx Aoytqmmjgwsfd 1 x nesting software in the machine controller Availability: immediately

Condition: used, Year of construction: 2023, Exhibition Machine Garbsen CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and Milling Made for You! This numerically controlled machining center is equipped with a comprehensive range of accessories and tools for milling and drilling, enabling it to meet every requirement in the field of wood processing. Highly efficient – with drilling spindles reaching up to 8,000 rpm – and featuring technology that includes the most robust spindle available on the market, offering more than 1,000 hours of maintenance-free operation. Fully equipped – the suction cups can be individually configured with the TV FLEX worktable to adapt the machine precisely to your requirements. Easy and intuitive programming thanks to the integrated Cad-Cam MAESTRO CNC software. User-friendly operation is ensured by the lowered machine frame, which provides unrestricted access to the worktable at all times. The control cabinet and vacuum pump are integrated into the machine base, and the PRO SPACE variant requires no additional structural safety measures. Robust Construction The supporting structure consists of an especially sturdy monolithic steel base, ribbed for stability and durability. The extra-wide bearing surface is purpose-designed to provide the machine with stability, ensuring constant precision in all working conditions. Anchoring to the floor is not required. The base forms a large, solid foundation for the moving gantry: the working unit is equipped with a balanced, stable, and resilient support, withstanding the highest stress, which ensures superior quality performance and greater accuracy. The moving gantry is a solid single piece anchored to the base, running on high-quality prismatic guides with ball bearing carriages. The working unit is mounted to this and moves along the Y and Z axes on prismatic guides with ball bearing carriages as well. Movement of the lower movable unit (X-axis) and the working unit along the gantry (Y-axis) is driven by a helical toothed rack and pinion system; this produces greater tooth-by-tooth thrust, achieving higher acceleration and increased speed on the X and Y axes. The specially designed helical gearing ensures reduced wear of mechanical components and quieter operation. The vertical Z-axis is driven by a recirculating ball screw, providing perfect balance under dynamic load and withstanding significant acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage, enabling superior surface finish quality as vibrations are completely eliminated. Travel along the X-Y-Z axes is achieved with brushless motors powered by static inverters. These provide: - Reduced processing times due to improved acceleration Hodpfx Aoytrgzjgwofd - Increased positioning accuracy due to high-resolution encoders - Elimination of setup tasks at machine startup thanks to absolute encoders - Elimination of general maintenance tasks, as the brushless system has no brushes Axis movement management and general operation of the working elements...

Condition: good (used), Year of construction: 2004, Machine is good working condition. Control unit Heidenhain TNC 530 Parts shown by hand not come. Hjdpfxjyufn Io Agwofd