Used Cnc Mill for sale (15,639)

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter: 460 mm, spindle speed (max.): 3,500 rpm, spindle bore: 86 mm, bar passage: 78 mm, controller model: Fanuc 32iTB iHMI, center width: 689 mm, CMZ turning and milling center including GL20II gantry loader! TECHNICAL DETAILS Turning diameter over bed: 760 mm Turning diameter over cross slide: 600 mm Maximum turning diameter: 460 mm Distance between centers: 689 mm Travel distance tailstock: 640 mm Travel distance X-axis: 310 mm Travel distance Z-axis: 640 mm Travel distance Y-axis: +70/-50 mm Travel distance B-axis: 640 mm Rapid traverse rates: 30/30/15/30 m/min Spindle speed max.: 3,500 rpm ASA 8" A2 Spindle bearing outer diameter: 200 mm Spindle bearing inner diameter: 130 mm Spindle bore: 86 mm Bar passage: 78 mm Number of tool stations: 12, all driven, 12,000 rpm Tool holder: 25x25 (50) Bedpfx Amezdrzxeneli MACHINE DETAILS Operating hours: 43,712 h Total operating hours: approx. 35,000 h Control system: Fanuc 32iTB iHMI Dimensions & Weight Machine dimensions (L x W x H): 2,542 x 1,760 x 1,880 mm Machine weight: 6,500 kg EQUIPMENT Gantry loader

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,002 h, functionality: fully functional, machine/vehicle number: NT100JG0126, turning length: 424 mm, turning diameter: 370 mm, travel distance X-axis: 380 mm, bar passage: 52 mm, controller model: FANUC FS-31iA5 (MAPPS 4), TECHNICAL DETAILS Turning length: 424 mm Maximum turning diameter: 370 mm (270 mm with turret 2) Bar capacity: 52 mm Turning-milling spindle Full indexing capabilities: Yes X-axis travel: 380 mm Y-axis travel: ± 105 mm Z-axis travel: 460 + 155 mm (ATC) B-axis: ± 120º Spindle speed: 12,000 rpm Drive power: 9/5.5 kW Tool magazine Number of magazine positions: 38 Tool holder: Capto C5 Maximum tool length: 250 mm (210 mm for tools under Ø70 mm) Maximum tool diameter: 70 mm / Ø130 mm (with/without adjacent tools) Maximum tool weight: 5 kg Lower turret X-axis travel: 155 mm Z-axis travel: 610 mm Number of tool slots: 10 Tool speed: 6,000 rpm Drive power for driven tools: 1.5/1.2 kW Main spindle Spindle speed: 6,000 rpm Drive power: 11/7.5 kW Bljdpfszf H Ezsx Amnji Spindle bore: 73 mm Chuck type: Hollow chuck (8") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Maximum torque: 223 Nm Counter spindle Spindle speed: 1,000 rpm B-axis: 4 fixed positions, 0º, -30º, -180º (-225º for overhang onto conveyor, if available) MACHINE DETAILS Control: FANUC FS-31iA5 (MAPPS 4) Potential rated power: 39.24 kVA Dimensions & Weight Dimensions (L x W x H): 2,705 x 2,425 x 2,385 mm Weight: 8,800 kg Operating Hours Power on: 54,061 h Spindle 1 operating hours: 9,813 h Spindle 2 operating hours: 5,002 h EQUIPMENT Chip conveyor Signal lamp High-pressure pump Air blow nozzle outside the spindle Foot switch (dual) for main and counter spindle

Condition: ready for operation (used), CNC Milling Machine, Deckel FP4NC, Used machine Manufacturer: Deckel Model: FP4NC Serial number: 31549 Bledowrdu Aepfx Amnji Travel range (per axis): X-axis: 560 mm Y-axis: 500 mm Z-axis: 450 mm Table specifications: Length: 900 mm Width: 530 mm Max load capacity: 450 kg Feed rates: X-axis: 3600 mm/min Y-axis: 3600 mm/min Z-axis: 3600 mm/min Spindle specifications: Spindle taper: ISO 40 / BT / MK Spindle power: 7.5 kW Max speed: 5000 RPM

Condition: excellent (used), Year of construction: 2023, operating hours: 1,294 h, functionality: fully functional, turning length: 550 mm, turning diameter: 390 mm, bar diameter (max.): 81 mm, DN SOLUTIONS DOOSAN PUMA GT2100B – YEAR 2023 🔹 Quantity: 2 Units 🔹 10” Chuck 🔹 Ø81 mm Spindle Bore 🔹 Max Turning Length: 550 mm 🔹 Max Turning Diameter: Ø390 mm 🔹 Box Guideways 🔹 Fanuc i PLUS Control Machine Details: Bodpfjyw Thisx Amneli • Machine 1: Cutting Hours 1294 (Equipped with programmable tailstock and tool presetter) • Machine 2: Cutting Hours 1230 (Without tool presetter) 📞 For detailed videos, photos, and additional technical information, please feel free to contact us. Let’s get in touch and discuss further. Contact: Muhammed Özkaya

Condition: like new (used), Year of construction: 2022, operating hours: 850 h, functionality: fully functional, turning length: 610 mm, turning diameter over cross slide: 500 mm, turning diameter: 725 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 260 mm, feed length Y-axis: 80 mm, feed length Z-axis: 610 mm, torque: 250 Nm, bar passage: 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE with ShopTurn control! CNC turning center for complete machining of turned and milled parts. Bodpfx Ajx E Dncsmneli Features integrated spindle motors and a water-cooled sub-spindle (preloaded roller guides) with Y-axis on both main and counter spindle. State-of-the-art SINUMERIK ONE control with ShopTurn dialogue programming. Main spindle: - Max. bar capacity: 65 mm - Max. torque: 250 Nm - Speed range: 0–5000 rpm Sub-spindle: - Drive power: 22 kW - Max. torque: 130 Nm - Speed range: 0–7000 rpm Turret: - 12-station VDI 30 radial tool turret with directional logic for up to 12 driven tool holders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis travel: +/- 40 mm Includes hollow clamping cylinder with draw tube, C-axis on main and sub-spindle, Sinumerik ONE/OPERATE control, 22" multi-touch display, ShopTurn, 3D simulation, residual material detection, USB interface, electrical cabinet climate unit, reinforced coolant unit (24 bar), chuck flushing (additional pump 3.5 bar), part ejector and flushing through sub-spindle. Hydraulic unit, interface for chip conveyor, documentation and CE certificate. Control language: German/English Electronic handwheel EMCO tool breakage and wear monitoring/SINUMERIK ONE Alternating spindle speed Sub-spindle as tailstock: This cycle allows using the sub-spindle with mounted live center for workpiece support, enabling shaft part machining on machines without a tailstock by using the sub-spindle. Max. thrust force limited to 50% of max. axis force. EMCO PROFI-NET ROBOT INTERFACE: Interface for robot integration using HARTING connector, signal exchange via Profinet, safety signals two-channel/potential-free. Digitalization package for Sinumerik: Condition monitoring SIEMENS ONE INTERFACE for integration with MDE/BDE systems, standard with the following information: - Machine ON - AUX ON - Automatic operation - Production mode - active program - Program running and override between 95 and 105% - Part count impulse (M30) - Programmable impulse (M300) 3D machine data/MT65-G2: 3D data model of the machine included. Pneumatically operated finished part catcher for gentle unloading – parts are transferred into a catch box (standard) or onto a conveyor belt (optional). - Max. finished part length: 175 mm - Max. finished part diameter: 65 mm - Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000 for connection of EMCO's SL1200 short bar loader. Further options available… Machine is available immediately!

Condition: used, Year of construction: 2014, controller manufacturer: Siemens, controller model: 840 Dsl - Operate, _____ Description: Year of manuf. : 2014 Control : Siemens 840 Dsl - Operate Turning diam. : 340 mm Turning length : 1185 mm In General: Year of manufacture:2014 Control system:Siemens 840 Dsl - Operate Swivel diameter:540 mm Turning length:1,185 mm Bar capacity:67 mm Main spindle: Technology:Direct drive spindle Speed:5,000 rpm Power:32 kW Torque:360 Nm Bar capacity:67 mm C-axis:0.001° Chuck:Hainbuch Spanntop Axfix 65 Hydraulic clamping:Differential pressure clamping Clamping cylinder:Hollow clamping cylinder Coolant supply:External (chuck flushing) Sub spindde: Technology:Direct drive spindle Bsdezig Tmopfx Amnoli Speed:5,000 rpm Power:32 kW Torque:360 Nm C-axis:0.001° Chuck:Hainbuch Spanntop Axfix Hydraulic clamping:Differential pressure clamping Coolant supply:External and internal Tailstock function:Mechatronic control of the sub spindle Tool carrier I (X/Y/Z/B): Technology:Milling spindle on a travelling column Milling spindle speed:12,000 rpm Max. power:22 kW Tool holder:HSK 63 X-axis:450 mm Y-axis:200 mm (+/- 100) Z-axis:1,200 mm B-axis:+/- 110° Position measurement systems:Direct (glass scales) Tool carrier II (X/Y/Z): Technology:Tool turret on cross slide Tool drive:Direct drive Speed:10,000 rpm Power:14 kW Torque:34 Nm X-axis:195 mm Y-axis:80 mm (+/- 40) Z-axis:1,200 mm Tool holder:VDI 40 Number of tool stations:12 Steady rest:SLU2X turret steady rest, 8–101 mm Tool magazin: Technology:Chain magazine Number of stations:80 Tool changer:Double gripper Equipment: Position sensors:Direct in X1/Y1/Z1/X2/Z2/Z3 Chip removal:Chip conveyor Coolant supply:CTS system, 20 bar Tool monitoring:Easy Tool Monitor Tool measurement:Tool setter, Renishaw Part removal:Part gripper, conveyor belt Bar feeder:Interface Emulsion mist separator:Mechanical Software option I:5-axis simultaneous milling Software option II:Off-centre turning and milling Software option III:Alternating spindle speed Chucks:2x Hainbuch Spanntop

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, turning length: 196 mm, turning diameter over cross slide: 130 mm, spindle speed (min.): 6,000 rpm, bar diameter (max.): 36 mm, overall weight: 1,900 kg, Equipment: documentation/manual, Yamazaki Mazak QT-6T CNC Turning Center – Excellent Condition We offer for sale a well-maintained Yamazaki Mazak QT-6T CNC Turning Center, manufactured in Japan and kept in excellent mechanical and operational condition. Bjdpfx Amezal Rasnsli The machine is currently under power, in production, and available for inspection and testing upon appointment. Machine Information - Manufacturer: Yamazaki Mazak - Model: Quick Turn QT-6T - Year of Manufacture: 1999 - Serial Number: 39178 - Country of Origin: Japan - CNC Control: Mazatrol - Configuration: 2-Axis CNC Turning Center (X / Z) - Machine Weight: Approx. 1,900 kg Main Features - 6" Chuck - Collet Chuck - Complete Set of Collets Included - Bar Capacity up to 36 mm - 8-Station Turret - Tool Eye (Automatic Tool Measurement System) - Automatic Parts Catcher - Coolant System - Fully Operational Included Equipment - Fedek Bar Feeder - Bar Feeder Length: 1.5 m - Pneumatic Bar Pushing System - 6" Chuck - Collet Chuck - Complete Set of Collets - Full Set of Tool Holders - Original Manuals and Documentation - Various Accessories Additional Equipment Included The machine is supplied with the complete set of spindle protection plastic tubes (bar guide tubes), allowing safe operation with bar stock and minimizing vibration, noise, and bar whipping during spindle rotation. This contributes significantly to machining stability, surface finish quality, and spindle protection when running long bars. Technical Specifications - Maximum Turning Diameter: Approx. 130 mm - Maximum Turning Length: Approx. 196 mm - Spindle Bore: Approx. 45 mm - Maximum Spindle Speed: Up to 7,000 rpm - Bar Capacity: 32–36 mm - X-Axis Travel: Approx. 80 mm - Z-Axis Travel: Approx. 200 mm - Rapid Traverse X/Z: Up to 30 m/min Condition ✔ Excellent mechanical condition ✔ Regularly maintained ✔ Machine under power ✔ Ready for immediate production ✔ Inspection and test run possible ✔ All manuals and documentation available Additional Information This machine is offered as a complete production package and is ideal for precision machining of bar stock, small and medium batch production, and high-accuracy turning applications. The machine comes with extensive tooling, collets, holders, automatic tool setting, automatic parts catcher, bar feeder, and spindle guide tube system, allowing immediate integration into production with minimal additional investment. Loading assistance is available. Videos of the machine running can be provided upon request.

Condition: new, Year of construction: 2026, functionality: fully functional, turning height: 2,300 mm, workpiece weight (max.): 12,000 kg, turning diameter over cross slide: 2,650 mm, turning diameter: 2,700 mm, faceplate diameter: 2,000 mm, total height: 7,100 mm, total width: 5,500 mm, total length: 8,500 mm, rotary table diameter: 2,000 mm, rotational speed (max.): 250 rpm, rotational speed (min.): 1 rpm, spindle speed (min.): 5 rpm, spindle speed (max.): 2,500 rpm, table load: 12,000 kg, table diameter: 2,000 mm, warranty duration: 24 months, overall weight: 63,000 kg, faceplate torque: 43,000 Nm, repeat accuracy: 0.015 mm, REM SCR 27 1SF — CNC Vertical Turning & Milling/Drilling Center 🔴 MACHINE CURRENTLY UNDER ASSEMBLY — DELIVERY MAX 3 MONTHS 🔴 24-MONTH WARRANTY — LONGEST IN ITS CLASS 🔴 UNBEATABLE PRICE FOR EUROPEAN CNC QUALITY ━━━━━ MACHINE HIGHLIGHTS ━━━━━ ✓ Complete turning + milling + drilling in ONE setup ✓ 12-Station ATC — bi-directional, 30 sec tool change ✓ Live spindle ISO 50 — 5 to 2,500 RPM | 37 kW ✓ C-Axis for full contour milling ✓ FANUC 0i-TF PLUS CNC — global support ✓ Heidenhain absolute measuring system (X: LC 195F) ✓ CE certified, full enclosure 3,300mm height ✓ Heavy-duty Meehanite cast iron structure ━━━━━ TECHNICAL SPECIFICATIONS ━━━━━ • Max Machining Diameter: 2,650 mm | Swing: 2,700 mm • Max Machining Height: 2,300 mm • Table Diameter: 2,000 mm (8 T-slots + 4 clamping jaws) • Max Workpiece Weight: 12,000 kg • Table Speed (turning): 1–250 RPM • Main Motor: 100 kW FANUC servo | Torque: 43,000 Nm • Ram Cross Section: 250×250 mm • X/Z Rapid Feed: 10,000 mm/min | Feed: 0.02–6,000 mm/min • X/Z Thrust Force: 35,000 N • ATC: 12-station disc | Max tool Ø 300mm | L 400mm • Coolant: 2,000 L tank | External 10 bar | Through-spindle 40 bar • Chip Conveyor: SARIGÖL hinged, 500mm wide • Accuracy: ±0.020 mm/m | Repeatability: ±0.015 mm • Electrical: 400V/50Hz | 140 KVA | Fanuc 0i-TF PLUS • Weight: 63,000 kg | 8,500×5,500×7,100 mm ━━━━━ IDEAL APPLICATIONS ━━━━━ Large gear blanks | Ring gears | Wind energy hubs & rings Heavy castings & forgings | Oil & gas flanges Mining equipment components | Aerospace large parts ━━━━━ COMMERCIAL TERMS ━━━━━ Delivery: MAX 3 MONTHS from order Bsdjzb Ufvspfx Amnsli Warranty: 24 MONTHS parts + labor Incoterms: EXW Bacău, Romania Payment: 50% advance + 50% before shipment Installation & commissioning: included Manufacturer: REM Bacău, Romania

Condition: good (used), Year of construction: 2015, Ref. -No.: 10652 Manufacturer: DMG MORI Type: NT 4300 DCG 1000 S Year of construction: 2015 Type of control: CNC Control: Fanuc F31iA5 Storage location: Halberstadt Country of origin: Japan Machine-No.: NT430XXXX Turning Length: 983 mm Spindle power: 18,5 / 11 kW Travel -X Axis: 750 mm Travel -Y Axis: +-210 mm Travel -Z Axis: 1220 mm Max. machining diameter: 660 mm Number of tool stations: 100 pc Tool configuration: CAPTO C6 Tool holder: 70 pc Further information: - Control and Measurement Systems - Control computer: Fanuc F31iA5 Bljdpfxozh Hl Ts Amnsi - Tool measurement system: included - Included equipment - Internal tool cooling system + high-pressure pump - Conveyor belt - Controller - Foot switches for main and sub-spindles - Tool measurement arm - Machine manuals The machine can be inspected while powered on by prior arrangement.

Condition: used, Year of construction: 1991, This Butler CNC bed milling machine will be auctioned off online as part of our industrial auction / machine auction, which includes clearing out warehouse stock – pallets, office supplies, and other items. Bjdpfx Amozhmftonoli You can find this and many other items on our platform.

Condition: used, Year of construction: 2007, turning diameter 42 / 140 mm turning length 170 mm control Mitsubishi Meldas turning speeds 80-8.000 U/min c-axis 0,001° turret (x-stations) 2x 12 (VDI 20) angetrieben turning speeds 45-4.500 U/min spindle 1 kW gripping station 42 mm turning speeds 60-6.000 U/min Bodpfx Amovyli Eeneli c-axis 0,001° number of controlled axis 8 collet unit 48 DIN 6343 . Number of working hours 10769 h chip conveyor ja/yes Bj. 2018 total power requirement 7,5 / 11 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 2,4 x 1,6 x 2,2 m CNC turning and milling machine CITIZEN BOLEY BE 42, year 2007 Simultaneous working with 7 axes on main and pick-up spindle very good condition, operating hours 21.999h (September 2024) Accessories: # Various tool holders (see picture) 5x axiale driven tool holder # collet chuck for collets type 173E # additional coolant cooler # Knoll chip conveyor, year of construction 2018 The Boley BE 42 is without barloader. Loading magazine interface has been fitted. Complete battery exchange on 22.12.2025

Condition: used, Year of construction: 2018, machine/vehicle number: Q4A181101, SIEMENS SINUMERIK 828d control system, travel ranges X/Y/Z = 350/250/300 mm, weight 2,030 kg, RITTAL control cabinet, 24-position tool changer SK30, rigid tool clamping plate, chip conveyor KABELSCHLEPP, coolant system. Bjdpfx Amsy U R Rcjnoli

Condition: excellent (used), Year of construction: 1989, I am selling a CNC lathe Mazak QuickTurn 20N. Lathe in bdb condition. Equipment: MAZATROL T-2, control MAZATROL CAM-T-2. Bljdeu U R E Aopfx Amnoi

Condition: new, Year of construction: 2026, CORMAK C1531 ATC CNC Router (1500 × 3100 mm) Machine Description 1. Worktable Sectioned vacuum worktable with four independent vacuum zones, manufactured from rigid and durable HPL panels. Each vacuum zone is connected to the vacuum pump through an integrated piping system. Bledpfjycuvqjx Amnsi Main vacuum openings are fitted with sealing plugs, allowing efficient clamping of workpieces in various sizes. The worktable surface features a network of vacuum channels, ensuring uniform vacuum distribution across the entire working area. Integrated T-slots allow manual workpiece clamping when required. 2. HQD Spindle High-performance 5.5 kW brushless HQD spindle from a renowned manufacturer, inverter-controlled and equipped with overload protection. High-speed electro-spindle featuring an advanced air-cooling system for reliable, low-maintenance operation. Designed for automatic tool changing (ATC), significantly reducing machining time by eliminating manual tool changes. 3. Drive System Energy-efficient Leadshine 1500 W AC servo drives with high holding torque (dual drive on the Y-axis), controlled by the NK-105 G3 digital controller, ensuring outstanding machining quality at high feed rates. Brushless servo motors drive the X and Y axes through precision planetary gearboxes. The Z-axis, where positioning accuracy is critical, is driven by a reinforced precision ball screw. Gantry movement along the X and Y axes is achieved through HIWIN linear guideways and precision helical rack-and-pinion drives, manufactured from hardened and heat-treated steel for maximum durability and long-term reliability. Professional HIWIN linear guide rails are installed on all axes and undergo strict quality inspection. 4. Machine Construction The moving gantry is manufactured from a cast iron casting, providing exceptional rigidity and excellent vibration damping for accurate and stable machining. 5. 8-Position Automatic Tool Changer & Tool Length Sensor Equipped with an 8-position linear automatic tool changer (ATC) complete with ISO30 tool holders and ER32 collets. Included tooling: 1/2" – 6 pcs 1/8" – 1 pc 3–4 mm – 1 pc 5–6 mm – 2 pcs 7–8 mm – 1 pc 9–10 mm – 1 pc Every CNC router is equipped with a precision automatic Z-axis tool length sensor, eliminating manual tool measurement after each tool change and reducing setup time. 6. Vacuum Pump (Optional) & Dust Extraction Hood The optional vacuum pump significantly increases workpiece holding force, preventing material movement during machining. Four independent vacuum zones ensure efficient and flexible workpiece clamping. Technical Specifications Parameter Value Working Area 1500 × 3100 mm Z-Axis Travel 300 mm Machine Construction Cast iron gantry / Welded steel frame Drive System Leadshine 1500 W AC servo drives Table Type T-slot / Hybrid vacuum table Spindle Power 5.5 kW Spindle HQD air-cooled (oil mist cooling optional) Spindle Speed 6,000–24,000 rpm Power Supply 400 V, compressed air min. 8 bar Repeatability ±0.01 mm Linear Motion System HIWIN linear guide rails and bearing blocks Workpiece Clamping Vacuum / Hybrid Vacuum Pump Optional 2 × 7.5 kW vacuum pump Software Optional UCanCAM V13 (Polish language version) Machine Dimensions 2450 × 3800 × 2200 mm Machine Weight 2050 kg

Condition: new, Year of construction: 2026, CORMAK C2141 ATC PREMIUM CNC Router (2100 × 4200 mm) 1. Worktable Sectioned vacuum worktable with four independent vacuum zones, manufactured from rigid and durable HPL panels. Each vacuum zone is connected to the vacuum pump through an integrated piping system. Main vacuum openings are fitted with sealing plugs, allowing efficient clamping of workpieces of various sizes. The worktable surface features a network of vacuum channels, ensuring uniform vacuum distribution across the entire working area. 2. HQD Spindle High-performance 9 kW brushless HQD spindle from a renowned manufacturer, inverter-controlled and equipped with overload protection. High-speed electro-spindle featuring an advanced air-cooling system, ensuring reliable operation and low maintenance. 3. Drive System Energy-efficient Leadshine 1500 W AC servo drives with high holding torque (dual drive on the Y-axis), controlled by the NK-105 G3 digital controller, delivering excellent machining quality while maintaining high feed rates. Brushless servo motors drive the X and Y axes through precision planetary gearboxes. The Z-axis, where positioning accuracy is critical, is driven by a reinforced precision ball screw. Gantry movement along the X and Y axes is achieved through HIWIN linear guideways and precision helical rack-and-pinion drives, manufactured from hardened and heat-treated steel for maximum durability and long-term reliability. Professional HIWIN linear guide rails are installed on all axes and undergo strict quality inspection. A centralized automatic lubrication system continuously lubricates the linear bearing blocks and ball screw, minimizing maintenance requirements and extending component life. 4. Machine Construction The moving gantry is manufactured from a cast iron casting, providing exceptional rigidity and excellent vibration damping during machining, resulting in improved machining accuracy and superior surface finish. 5. 8-Position Automatic Tool Changer & Tool Length Sensor Equipped with an 8-position linear automatic tool changer (ATC) complete with ISO30 tool holders and ER32 collets. Included tooling: 1/2" – 6 pcs 1/8" – 1 pc 3–4 mm – 1 pc 5–6 mm – 2 pcs 7–8 mm – 1 pc 9–10 mm – 1 pc Every CNC router is equipped with a precision automatic Z-axis tool length sensor, eliminating manual tool measurement after each tool change and reducing setup time. 6. Vacuum Pump & Dust Extraction Hood (Optional) Four independent vacuum zones for efficient workpiece clamping. 7. Industrial Control System & Software Equipped with the NK-105 G3 CNC control system. Compatible with the latest CAD/CAM software solutions. Optional UCanCAM V13 software available in Polish/English versions. Technical Specifications Working Area 2100 × 4200 mm Bodpfxovupu Uj Amnsli Z-Axis Travel 300 mm Machine Construction Cast iron gantry / Welded steel frame Drive System Leadshine 1500 W AC servo drives Table Type T-slot / Hybrid vacuum table Spindle Power 9 kW Spindle HQD air-cooled (oil mist cooling optional) Spindle Speed 6,000–24,000 rpm Power Supply 400 V, compressed air min. 8 bar Repeatability ±0.01 mm Linear Motion System HIWIN linear guide rails and bearing blocks Workpiece Clamping Vacuum / Hybrid Vacuum Pump Optional 2 × 7.5 kW vacuum pump Software Optional UCanCAM V13 (Polish/English version) Machine Dimensions 5070 × 2870 × 1900 mm Machine Weight 3350 kg

Condition: new, Year of construction: 2026, CORMAK IND 2131 CNC Router (2100 × 3100 mm) Machine Description 1. Worktable Sectioned vacuum worktable with six independent vacuum zones, manufactured from rigid and durable HPL panels, individually controlled directly from the electrical control cabinet. Each vacuum zone is connected to the vacuum pump through an integrated piping system. Main vacuum openings are equipped with sealing plugs, allowing efficient clamping of workpieces in various sizes. The table surface features a network of vacuum channels, ensuring uniform vacuum distribution across the entire working area. Integrated T-slots allow manual workpiece clamping when required. The table is equipped with pneumatic positioning stops on two axes, enabling fast and repeatable positioning of workpieces in exactly the same location. 2. Spindle High-performance 9 kW brushless spindle from a renowned manufacturer, inverter-controlled and equipped with overload protection. High-speed electro-spindle featuring an advanced air-cooling system, ensuring reliable operation and low maintenance. 3. Drive System High-efficiency YASKAWA AC servo drives, controlled by a digital CNC controller, delivering outstanding machining quality while maintaining high feed rates in all axes. Brushless YASKAWA AC servo motors drive the X and Y axes via precision planetary gearboxes. The Z-axis, where positioning accuracy is critical, is driven by a reinforced precision ball screw. Gantry movement along the X and Y axes is achieved through HIWIN linear guideways and precision helical rack-and-pinion drives manufactured from hardened and heat-treated steel, ensuring long-term reliability and accuracy. 4. Machine Construction The moving gantry is manufactured from a cast iron casting, providing exceptional rigidity and excellent vibration damping during machining, resulting in superior surface finish and machining precision. 5. Automatic Tool Changer & Tool Length Sensor Equipped with a 12-position linear automatic tool changer (ATC) complete with ISO30 tool holders and ER32 collets. Included tooling: 1/2" – 6 pcs 1/8" – 2 pcs 3–4 mm – 2 pcs 5–6 mm – 4 pcs 7–8 mm – 2 pcs 9–10 mm – 2 pcs Every CNC router is equipped with a precision automatic Z-axis tool length sensor, eliminating manual tool measurement after each tool change and reducing setup time. 6. Industrial CNC Control System The machine is controlled by an industrial SYNTEC CNC controller, commonly used in professional machining centres. Supplied with a handheld control pendant and LCD display. Optional UCanCAM V13 CAD/CAM software available in Polish and English language versions. Technical Specifications Parameter Value Working Area 2100 × 3100 mm Z-Axis Travel 300 mm Machine Construction Cast iron gantry / Welded steel frame Drive System 1500 W Hybrid AC LEADSHINE servo motors Table Type Hybrid vacuum table Spindle Power 9 kW Gearbox Shimpo Spindle Speed 6,000–24,000 rpm Power Supply 400 V, compressed air min. 8 bar Repeatability ±0.01 mm Linear Motion System HIWIN linear guide rails and bearing blocks Workpiece Clamping Vacuum / Hybrid Bljdpovup Unofx Amnji Vacuum Pump Optional 7.5 kW vacuum pump with 8 independent vacuum zones Software Optional UCanCAM V13 (Polish/English version)

Condition: new, Year of construction: 2026, Machine Description 1. Worktable Sectioned vacuum worktable with FOUR independent vacuum zones, manufactured from rigid and durable HPL panels. Each zone features vacuum ports connected via a piping system to the vacuum pump. Main vacuum openings are fitted with sealing plugs, allowing efficient clamping of workpieces in various sizes. T-slots are also provided for manual workpiece clamping when required. 2. HQD Spindle High-quality 9 kW brushless HQD spindle, powered by an inverter with built-in overload protection. High-speed electro-spindle equipped with an innovative air-cooling system. Designed for automatic tool changing (ATC), significantly reducing machining time by eliminating manual tool changes. 3. Drive System High-performance, energy-efficient Leadshine 1500 W AC servo drives with high holding torque (dual drive on the Y-axis), controlled by the NK-105 G3 digital controller, ensuring excellent machining quality at high feed rates. Brushless servo motors driving the X and Y axes through precision planetary gearboxes. Bledevupcrspfx Amnji The Z-axis, where positioning accuracy is critical, is driven by a reinforced precision ball screw. X and Y axis movement is transmitted through HIWIN linear guideways and precision helical rack-and-pinion drives, manufactured from hardened and heat-treated steel for long-term reliability. All axes are equipped with professional HIWIN linear guide rails, which undergo strict quality inspections and testing throughout the manufacturing and assembly process. 4. Machine Construction The moving gantry is manufactured from a cast iron casting, providing exceptional rigidity and excellent vibration damping during machining operations, resulting in improved surface finish and machining accuracy. 5. 8-Position Tool Changer & Tool Length Sensor Equipped with an 8-position linear automatic tool changer (ATC), supplied with ISO30 tool holders and ER32 collets. Included collets: 1/2" – 6 pcs 1/8" – 1 pc 3–4 mm – 1 pc 5–6 mm – 2 pcs 7–8 mm – 1 pc 9–10 mm – 1 pc Every CNC router is equipped with a precision automatic Z-axis tool length sensor, eliminating manual tool measurement after each tool change and reducing setup time. 6. Vacuum Pump (Optional) & Dust Extraction Hood Four independent vacuum zones for efficient workpiece holding. Pneumatically operated dust extraction hood mounted around the spindle, allowing connection to virtually any dust extraction system while maintaining a clean working environment, improving operator safety, and preserving machining accuracy. Technical Specifications Parameter Value Working Area 2100 × 3200 mm Z-Axis Travel 300 mm Machine Construction Cast iron gantry / Welded steel frame Drive System Leadshine 1500 W AC servo drives Table Type T-slot / Hybrid vacuum table Spindle Power 9 kW Spindle HQD air-cooled (oil mist cooling optional) Spindle Speed 6,000–24,000 rpm Power Supply 400 V, compressed air min. 8 bar Repeatability ±0.01 mm Linear Motion System HIWIN linear guide rails and bearing blocks Workpiece Clamping Vacuum / Hybrid Vacuum Pump 2 × 7.5 kW (optional) Software UCanCAM V13 (Polish language version, optional) Machine Dimensions 4070 × 2870 × 1900 mm Machine Weight 2050 kg

Condition: like new (used), Year of construction: 2024, operating hours: 500 h, functionality: fully functional, DN Solutions PUMA 4100LMA Manufactured: November 2023 Only 550 hours of actual cutting time FANUC i Plus / iHMI control unit 12-station servo turret Bedszdartjpfx Amnsli 8 live tools (driven tools) C-axis Programmable hydraulic tailstock Maximum turning diameter: Ø550 mm Maximum turning length: 2,060 mm Swing over bed: Ø790 mm Bar capacity: Ø102 mm Maximum workpiece weight: 500 kg X-axis travel: 352 mm Z-axis travel: 2,155 mm X-axis rapid traverse: 16 m/min Z-axis rapid traverse: 20 m/min 12-inch (315 mm) hydraulic chuck Spindle nose: ASA A2-11 Maximum spindle speed: 3,000 rpm Main motor power (continuous): 22 kW Main motor power (30 min rating): 37 kW Maximum spindle torque: 832 Nm Live tool speed: 4,000 rpm C-axis indexing increment: 0.001° Chip conveyor Chip bucket Automatic centralized lubrication system Coolant system Tool life management Spindle load monitoring Manual Pulse Generator (MPG) Working lamp Machine dimensions: 5,774 × 2,275 × 2,272 mm Machine weight: 11,050 kg

Condition: used, Year of construction: 2004, Technical details turning diameter 210 mm turning length 700 mm control Okuma OSP-E 100 L total power requirement 35,7 kVA weight of the machine ca. 7,1 t dimensions of the machine ca. 2660 x 2000 x 2330* mm Additional information CNC turning and milling center with C-axis and Y-axis, 2 turrets, and subspindle. CNC control: Okuma OSP-E 100 L Maximum turning diameter: 210 mm Swing over bed: 400 mm Distance between spindle noses: 960 mm Main spindle: Spindle bore: 53 mm Speed range: 50 to 6000 rpm Motor power: 11/7.5 kW Bledpfjzimu Dsx Amnei Subspindle: Spindle nose: JIS A2-6 Speed range: 38 to 5000 rpm Motor power: 11/7.5 kW Z-axis: Travel: 700 / 700 mm (ZA + ZB) Rapid traverse: 40000 mm/min W-axis: Travel: 940 mm Rapid traverse: 40000 mm/min X-axis: Travel: 167 / 192 mm (XA + XB) Rapid traverse: 30000 mm/min Y-axis: Travel: 92 mm (+50/-42 mm) Rapid traverse: 15000 mm/min C-axis: Indexing: 360 x 0.001 deg. Rapid traverse: 400 rpm Disc turret: 2 x 12 stations Tool holder mount: VDI 30 mm Power of driven tools: 4 kW Total connected load: 35.7 kVA Machine weight: 7100 kg Machine dimensions: 2660 x 2000 x 2330 mm* Plus swarf conveyor and bar loader Accessories FMB Turbo 5-42/6200/A bar loader, year of manufacture 2005 Chip conveyor Coolant system Collet chuck for main and subspindle Both turrets equipped with tool holders Machine documentation.

Condition: excellent (used), Year of construction: 2010, chuck diameter 210 mm max. swing diameter over bed 500 mm swing diameter over slide rest 290 mm turning diameter 200 mm centre distance 700 mm turning length 500 mm travel -y axis 80 (+/-40) mm travel -x axis 190 mm travel -z axis 525 mm spindle bearing diameter 100 mm bar capacity 65 mm spindle bore 73 mm spindle turning speed range 6000 U/min turret (x-stations) 12 work piece power 4,18 kW speeds of tool 5000 U/min VDI 30 control Siermens 840D total power requirement 20 kW weight of the machine ca. 4,3 t dimensions of the machine ca. TBH 2,2 x 4,5 x 1,82 m Very well-maintained machine from a training workshop that has closed down. Power-on hours: 14,944 h. Spindle hours: 2,233 h. Includes current measurement report (available upon request) Blodpfx Ajzhpamsmnji Includes Y-axis Includes C-axis Includes approx. 10 tool holders (including 2 driven units: EWS axial/radial) Includes SMW 3-jaw chuck Includes tailstock center Includes tool probe arm Includes chip conveyor Includes parts unloading arm with conveyor belt Includes coolant system Includes documentation

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, total height: 3,067 mm, total width: 3,413 mm, table width: 800 mm, table length: 1,700 mm, table load: 1,500 kg, overall weight: 14,000 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 18,500 W, product length (max.): 4,270 mm, number of axes: 3, This 3-axis KNUTH X-MILL 1500 CNC was manufactured in 2011. It features an impressive X-axis travel of 1500 mm, Y-axis travel of 800 mm, and Z-axis travel of 700 mm. The machine includes a robust table size of 1700 x 800 mm with a load capacity of 1500 kg. If you are looking to get high-quality machining capabilities, consider the KNUTH X-MILL 1500 CNC vertical machining centre we have for sale. Contact us for further details. - Number of T-slots: 5- T-slot Width: 22 mm- T-slot Spacing: 135 mm- Spindle Nose to Table Surface Distance: 170-870 mm- Throat Depth: 800 mm- Spindle Speed Range: 60-8000 rpm- Spindle Taper: MAS BT 50- X-axis Rapid Feed Rate: 15000 mm/min- Y-axis Rapid Feed Rate: 15000 mm/min- Z-axis Rapid Feed Rate: 10000 mm/min- Working Feed Rate: 5-5000 mm/min- Tool Changer Capacity: 24 positions- Positioning Accuracy: ±0.01 mm / ±0.00039"- Repeatability Accuracy: ±0.005 mm / ±0.0002"- Main Drive Motor Power (continuous / 30 min): 15 / 18.5 kW (15 / 25 Hp)- Total Power: 18.5 kW- Voltage: 400 Volt- Frequency: 50 Hz / 3 Phases Technical Specification Taper Size BT 50 Bledpfxsziaggj Amnsi

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, For sale: Well-maintained EMCO Hyperturn 665 MC Plus with IEMCA Master 880MP-E bar loader, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for machining brass parts! CNC Turning and Milling Center | EMCO Hyperturn 665 MC Plus with main and sub-spindle, C and Y axes, dual turrets each with 12 driven tool stations! Technical Data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840D Max. turning diameter: 430 mm Max. turning length: 744 mm Blsdpfxsxzq Nce Amnei Max. bar capacity: 65 mm Travel - X: 270 mm Travel - Z: 750 mm Travel - X2: 205 mm Travel - Z2: 750 mm Travel - Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2x 12 positions, all driven! Tool holder: VDI 30 Upper turret: X, Z, Y axes Lower turret: X, Z axes Sub-spindle traverse (left/right): Z3 axis C11 spindle: 65 mm diameter (hollow chuck cylinder) C12 spindle: 45 mm diameter (solid chuck cylinder) with part ejector Tool turret type: Sauter 2x 14 bar high-pressure pumps Accessories: Complete tooling cabinet with driven and static toolholders as well as carbide inserts and tool holders Collet chucks for main and sub-spindle Full documentation etc. Machine available immediately! Ready for operation! Loading will be handled by us! Transport can be organized upon request!

Condition: used, Year of construction: 2018, operating hours: 5,500 h, functionality: fully functional, machine/vehicle number: MV0053-000508, number of tool stations in tool turret 3: 30, tool holder type of tool turret 2: BT 40, Used 5-axis vertical machining center with FANUC 0i-MD CNC control. Bsdpfx Amezihl Densli

Condition: used, Year of construction: 2019, operating hours: 4,500 h, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 800 mm, rotational speed (max.): 12,000 rpm, total length: 4,000 mm, tool holder type of tool turret 2: BT 40, Doosan VCF850 machining center, continuous 5-axis operation, rotary table, Fanuc control. Blodpfezihg Usx Amnoi

Condition: excellent (used), Year of construction: 2007, CNC control: Heidenhain TNC 124 Travel ranges: X-axis travel: 620 mm Y-axis travel: 420 mm Z-axis travel: 400 mm Main spindle speed range: 50 - 4000 rpm Gear stages: 2 Main spindle drive power: 6 kW Blodpfx Aozh Effomnei Tool holder: ISO 40 Clamping force: 10 kN Spindle head: manually swiveling ±45° Max. tool diameter: 125 mm Max. tool weight: 6 kg Table clamping surface: 400 x 800 mm T-slots: 5 x 14 x 80 mm Max. table load: 400 kg Feed rate X / Y: 0 – 6000 mm/min Feed rate Z: 0 – 4000 mm/min Rapid traverse X / Y: 6000 mm/min Rapid traverse Z: 4000 mm/min Total connected load: 10 kW Footprint L x W x H: 2850 x 3350 x 2000 mm Machine weight: 2100 kg