Used Compact Filter System for sale (44,543)

Condition: good (used), Year of construction: 1986, Hall extraction system, chip filter system, filter system, chip extraction, wood chip extraction, Hsdpfx Aisfxx Nnsrew Centrifugal fan, chip extraction fan, fan, suction, chip fan -unfortunately no funding data available -Motor: MEZ type 4AP80-2 -Motor power: 1.1 kW -Speed: 2840 rpm -Connection input: Ø 60 mm -Outlet connection: Ø 400 mm -Base: on castors -Dimensions: 940/540/H1510 mm -Weight: 74kg

Condition: used, Hall extraction system, chip filter system, filter system, chip extraction, wood chip extraction, Radial fan, chip extraction blower, fan, extraction, chip blower -Handover: in its current state as inspected, without filter element -Manufacturer: Höcker -Motor power: 1.5 kW -Speed: 2870 rpm -Inlet connection: Ø 147 mm Hodpfx Aiof D Azhsrjw -Outlet connection: Ø 515 mm -Base frame: on casters -Dimensions: 610/1100/H1405 mm -Weight: 68 kg

Condition: good (used), Oil filter system, oil purification system, oil transfer system, hydraulic unit, hydraulic pump, hydraulic pump, hydraulic test pump -Magnetic filter -for: hydraulic and other oils Hsdpfx Aectvqisirjw -electrical control -Dimensions: 820/420/H1030 mm -Weight: 70 kg

Year of construction: 2025, condition: new, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve for dust disposal using big bags. Hjdpfslxyhfjx Airjw Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: excellent (used), Year of construction: 1998, A stainless steel filter system with compressed air cleaning, in very good condition. Hedsfg Iphjpfx Airsw Filter area: 50 m². Material: V4A (1.4571) 316TI Installed stainless steel radial fan, drive power: 22 kW; volume flow: 6700 m³/h; pressure: 8000 Pa Compressed air valves: ASCO 24 Volt Number of filter pockets: 48 Filter medium: no longer available Insulation: Yes With differential pressure measurement Dimensions L/W/H: 3000 mm / 1700 mm / 2100 mm (up to outlet) The filter consists of 2 modules that are divided in the middle. Also available: Stainless steel cooling screw conveyor, diameter 400 mm, length 4100 mm.

Condition: new, Year of construction: 2024, 1 cloos welding robot qirox 350 incl. control unit, teach pendant incl. cable Connection cable between control unit and robot 5 m Gasnozzle sensing, seam tracking, point editor Pedastal for robot Cloos welding machine next 452 ( 450 A pulsed arc machine), wire drive, torch, torch hose package, torch jig, connection hose package 5 m, mech. torch cleaning 2 stations turning table incl. 2 turning tilting devices WP TS-50 load capacity/station 500 kg, swing radius 800 mm 1 light beam, 1 start stop box, 1 safety wall on turning table 2 safety switches for swing doors Base frame between robot and workpiecemanipulator Hjdpfedkcrgox Airow delivery time: 12-14 weeks. Subject to prior sale.

Condition: new, Volumes: available in 10 m³ or 20 m³ versions Product description: The Easyplan is a compact yet powerful drying system designed for drying softwood and hardwood, as well as for treating pallets and wood packaging to comply with ISPM-15 standards. It ensures complete phytosanitary compliance and consistently delivers high-quality drying results for a wide range of timber types. Installation takes less than one day, making it ideal for rapid deployment in small to medium-sized production facilities. The process is fully automatic – simply load the kiln and let the system manage the entire drying or heat treatment cycle. Available heating options: Electric: 27 and 36 kW Gas: 200 kW gas burner Hot water/steam Wood stack size for EASYPLAN 10 and EASYPLAN 20: 4 m - 6 m 180 - 300 EPAL pallets Key benefits: Capacities of 10 m³ or 20 m³ to suit different production requirements Suitable for both softwoods and hardwoods ISPM-15 compliant pallet and wood packaging treatment, firewood drying Fully automatic drying process Hjdsw Hfzajpfx Airew Quick installation in less than 24 hours Flexible heating options to match available energy sources

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Hsdpfew Ivqgex Airew Maintenance doors as swing doors Maintenance easy.

Condition: new, Year of construction: 2025, Dedusting system with pre-chamber separator specially developed for aggressive sandblasting dusts, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.16.B250 15,000m³ (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas compartment with filter cartridges and clean gas compartment with filter cleaning by means of compressed air, each with separate maintenance doors that are easy to open. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the 16 filter cartridges - cleaning. Technical data, approx. Type PF 1.16.B250 W x D x H 1.6 x 1.9 x 4.2m Air flow rate 15000 cbm/h Filter cartridges 16x 15,6m² Filter area 249.6 m² Filter medium PE fiber fleece Hedpsw Ivrwofx Airow Residual dust content 99.9%

Condition: used, ABUS Hall Crane 500 kg Description: For sale is a professional, free-standing light crane system from market leader ABUS (HB-System series), manufactured in 20. The system is in very good, clean condition, comes directly from an ongoing operation, and is perfectly suited for workshops, metalworking shops, automotive repair shops, or welding workstations for precisely and effortlessly moving loads up to 500 kg. Technical Data & Details: Crane & Hoist Manufacturer: ABUS Kransysteme GmbH Hoist Model: Original ABUS ABUCompact electric chain hoist (factory number) Load Capacity: Max. 500 kg (official ABUS marking on the bridge) Design: Free-standing support structure made of solid I-beam steel supports. No ceiling or wall mounting required! Construction: High-strength bolted connections with large gusset plates and additional diagonal bracing for maximum static safety. Floor Mounting: The pillars have thick baseplates for secure anchoring with heavy-duty anchors in the hall floor. Power Supply: Professional, original ABUS festoon cable system (C-rail with cable trolley) for tangle-free power supply over the entire travel length. Operation: Includes original ABUS floor control (crane pendant switch) with two-stage push buttons and an integrated emergency stop switch for precise operation directly from the ground. Condition: Disassembled and ready for loading Collection: Free of charge by the buyer Loading service: A forklift is available on site. We will gladly assist you free of charge with loading onto your transport vehicle. "Everything from one source: We would be happy to offer you suitable bank financing for your project." You can find more new and used items in our shop! Hjdjzrw Exepfx Airow International shipping costs on request!

Condition: new, Year of construction: 2025, Dedusting system with pre-chamber separator specially developed for aggressive sandblasting dusts, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.16.B250 15,000m³ (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas compartment with filter cartridges and clean gas compartment with filter cleaning by means of compressed air, each with separate maintenance doors that are easy to open. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the 16 filter cartridges - cleaning. Technical data, approx. Type PF 1.16.B250 W x D x H 1.6 x 1.9 x 4.2m Hsdort H Izopfx Airew Air flow rate 15000 cbm/h Filter cartridges 16x 15,6m² Filter area 249.6 m² Filter medium PE fiber fleece Residual dust content 99.9%

Year of construction: 2025, condition: new, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: Hjdpfx Aow Ivr Djirow a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: new, Year of construction: 2025, Vertical packaging machine including dosing system(s) with 4 manufacturing lanes to produce "stick-packs" with back center sealing (alternativ: with 3-/4-side seal - surcharge applies) to pack normal liquids (water, vinegar, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), piston Pump with 60 liter hopper. - Specifications: max. speed of the machine in neutral: 4x60 cycles/minute; accuracy: +/-10%; suitable for all BOPP/PE and laminated films; bag sizes: L(50-350)xW(10-100)mm; power: 220V, 3.5kW; compressed air: 1.5m³/min, 6bar; machine dimensions: L1500xW1300xH1900mm; weight: 450kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Hjdpov Nmd Aefx Airow Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: excellent (used), Year of construction: 2013, operating hours: 3,525 h, functionality: fully functional, machine/vehicle number: 801213, type of input current: three-phase, input voltage: 380 V, LAMINA CLG 1816 CRASH LOCK FOLDER GLUER 1, 3 OR 4 GLUE POINTS • NORDSON • COLD GLUE & HOT-MELT LAMINA CLG 1816 Crash Lock Folder Gluer available for sale. Manufactured in 2013, this machine is equipped with a professional NORDSON gluing system and can operate with 1, 3, or 4 glue points, providing excellent flexibility for different box constructions and packaging applications. The machine can work with both cold glue and hot-melt adhesive. MACHINE SPECIFICATIONS • Manufacturer: LAMINA System AB, Sweden • Model: CLG 1816 • Machine type: Crash Lock Folder Gluer • Year of manufacture: 2013 • Serial number: 801213 • Gluing system: NORDSON • Gluing configurations: 1, 3 or 4 glue points • Adhesive: Cold Glue and Hot-Melt • Operating hours: 3,525 hours • Total boxes glued: 1,595,966 • Automatic feeding • Automatic folding and gluing LOW USAGE Although the machine was manufactured in 2013, it was used in production for only approximately one year. Hjdpozyu Nqofx Airsw The machine currently shows: 3,525 operating hours 1,595,966 boxes glued This represents a relatively low level of use for an industrial folder gluer of this type.

Condition: used, Year of construction: 2015, operating hours: 4,500 h, Equipment: all wheel drive, * Enclosed cabin * Amberg in-cabin air filter system * 600 TL (presumably a monetary value or specification) * Air conditioning * Dozer blade * 47 kW engine power Hjdpfxo Afta Ae Airjw * Hydraulic control circuits on the boom ----Last service on March 24, 2026, at 4421 operating hours----Vehicle number 12643----Errors and prior sale excepted

Condition: used, Year of construction: 2012, Overview  This complete brewhouse was manufactured in 2012 and enables the production of 1,000-liter brews. The system works with steam and includes brewing, fermentation and storage tanks. It is immediately available and is currently installed and ready for operation in the production facility. The seller confirms that the system has worked perfectly until recently. The boilers have a copper coating, while the rest of the system is made of stainless steel. Details - Wort yield: 1,000 liters per brew - Heating system: Steam - Current status: Installed and ready for operation - Availability: Immediately Scope of delivery  - Brewhouse | Mini Brewery System | CI T 10 | 2012 - 2 kettles (mash tun above the whirlpool as one unit + separate boiling kettle) - Steam boiler | Mini Brewery System | - | 2012 (electric) Hsdpsv Da Dlsfx Airjw - Plate heat exchanger - Hot water tank | 1,500 L - Reverse osmosis system | ALFA | compact model | - - Capacity: 150-200 L/h - 4x Isobaric fermenter | Mini Brewery System | 1,000L | 2012 - 4x Horizontal isobaric maturation tank | DuoTank | 500 L | 2018 - Cooling jacket & bag system for optimum beer preservation

Condition: used, Year of construction: 2006, operating hours: 18,625 h, machine/vehicle number: LC598, Used aseptic line for Tetra Pak fino 1 L - 3600 PPHTechnical Specifications & Performance DataThis complete Tetra Pak Aseptic line is an integrated aseptic packaging solution engineered by Tetra Pak for liquid food applications. The core filling machine was manufactured in 2006 and is complemented by downstream packaging equipment. Designed for industrial packaging and beverage production, it provides reliable second hand performance with hygienic processing and efficient material handling.Production speed: up to 3,600 packages/hourContainer type: Carton-based aseptic packages (Tetra Fino Aseptic family)Supported volumes: 1.0LPrimary product currently run: MilkMain filler year: 2006Additional module: SOCO System unit, year 2014Accessories: Trolley for packing with roll holder, ABC valve, 1 m mesh conveyorAdvanced Automation & Control SystemsThe line incorporates an industrial control panel for central operation of filling and downstream handling. The aseptic filler integrates automatic process sequences for sterilization, filling, and sealing under controlled conditions. Operator safety interlocks and machine guarding support safe operation, while standardized HMI navigation streamlines recipe selection and format changes. The architecture is designed for fast restarts and consistent uptime in high-demand environments.Production Line Integration CapabilitiesThis used bottling line is configured for inline operation, linking the aseptic filler with conveyors and a SOCO System packaging module. It supports integration with typical ancillary devices such as product dispensers, cap or straw applicators, and end-of-line packaging machinery. Format changeovers accommodate multiple carton volumes within the 0.2L to 1.0L range, enabling multi-product flexibility for milk and juice production. The conveyor layout ensures smooth product transfers and balanced accumulation between stations.Machine Condition & Maintenance HistoryThe equipment is reported in production with overall good condition. Continuous operation on milk indicates stable performance and consistent hygiene compliance. The 2006 filler and 2014 downstream module are maintained to sustain aseptic integrity and packaging quality, making this second hand industrial packaging line a strong candidate for rapid redeployment.Operational Performance & VersatilityOptimized for liquid food, the line supports aseptic packaging of products such as milk and juices in pillow-style Tetra Fino Aseptic formats. Key benefits include extended ambient shelf life without preservatives, high barrier multi-layer materials, and hermetic sealing. The layout offers reliable filling accuracy, gentle product handling, and quality consistency suitable for beverage production requiring long shelf life and stable logistics.Installation Requirements & Site PreparationThe system is designed for standard industrial facility layouts with room for filler, conveyors, and a compact end-of-line module. Typical utilities include electrical power, compressed air, and process water as required by aseptic operations. A clean, controlled environment ... Hsdpfeyh E Apox Airow

Condition: used, Filter assembly, COMPAIR filter unit for compressor systems Compressed air filter Type: CF 0087B ZP Manufacturer's number: 3363006 / 05 / 005 Operating pressure: max. 16 bar Hedpfx Aishalvdsrjw Threaded connection: G 1 1/2" Flow rate: approx. 8.5 m³/min Filter element number: CE 0087B - Filter housing made of aluminum Weight: 5 kg Dimensions L x W x H: 125 x 110 x 420 mm Good condition

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) Hedpfx Aodrtalsirsw each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Year of construction: 2002, condition: refurbished (used), functionality: fully functional, machine/vehicle number: V02SC0039, System Ceramics Spa – EASYLINE F50V60 (Refurbished) Manufacturer: System Ceramics S.p.A. Machine type: EASYLINE F50V60 Condition: Used – fully refurbished Status: In good working condition Automatic system designed for checking the dimensional quality of tiles and subsequent boxing. Technical information: * Brand: System Ceramics * Category: Ceramic tile sorting / packaging equipment * Condition: Refurbished and tested * Functionality: Fully operational * Technical documentation * Availability: Immediate The machine has been professionally refurbished and maintained, ensuring reliability and reduced downtime. Optional services: * Machine inspection * Dismantling and loading Hedpfx Aijz Df Ucersw * Worldwide shipping available Price: On request Location: Italy Contact us for further details, photos, videos and technical specifications.

Condition: new, Year of construction: 2025, machine/vehicle number: 011/2020, STK-10000i is low-cost vacuum system from SAF TEKNIK and it offers very good filtration with a lot of power and airflow! Hsdpfxjf D S Tro Airjw It includes multiple filter columns and filter cleaning through vibrating. It also has a separator for bigger parts, which prevents damage to the whole system. TECH. SPECIFICATION: - Motor power: 11 KW - NEW: Frequency inverter for main motor - Exhaust capacity: 10000 m3/h - Air speed: 41 m/s - filter area: 30 m2 - bin volume: 810 Liters - exhaust inlet diameter: 355 mm - weight: 740 kg - dimensions: 3170 mm X 1200 mm X 2330 mm OTHER VERSIONS, also available: - STK-6500 (6500 m3/h) - STK-8000 (8000 m3/h)

Condition: new, Year of construction: 2025, Dedusting system with pre-chamber separator specially developed for aggressive sandblasting dusts, complete Hjdow Ivrqepfx Airjw essentially consisting of: a) 1 cartridge dry filter, type PF 1.16.B250 15,000m³ (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas compartment with filter cartridges and clean gas compartment with filter cleaning by means of compressed air, each with separate maintenance doors that are easy to open. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the 16 filter cartridges - cleaning. Technical data, approx. Type PF 1.16.B250 W x D x H 1.6 x 1.9 x 4.2m Air flow rate 15000 cbm/h Filter cartridges 16x 15,6m² Filter area 249.6 m² Filter medium PE fiber fleece Residual dust content 99.9%

Condition: excellent (used), Year of construction: 2017, Semi-automatic laminating/mounting machine including: • Automatic substrate sheet feeder • Precision gluing unit with automatic glue application • Laminating station with automatic front and side registration system Hsdo Agfx Ijpfx Airew • Pressure station • Stacking table • PLC control system • Feeder designed to handle materials 800 mm (32)

Condition: used, This listing is for Bio-Rad Trans-Blot Turbo 690BR Transfer System The unit is in full working condition and ready for immediate use The Trans-Blot Turbo is a rapid protein transfer system designed for transferring proteins from electrophoresis gels to membranes for Western blotting. It provides a compact, efficient solution for routine laboratory protein analysis Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: Hjdpfsztpubjx Airjw By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Year of construction: 2018, condition: used, This listing is for the Hamilton Microlab STARlet M The unit is in full working condition and ready for immediate use. Software is included A precision liquid handling system designed for automated pipetting and sample preparation. Known for accuracy and repeatability, it supports efficient lab workflows in research and analytical environments. Compact and user-friendly design. Transparency Report and Technical Audit: Hsdpfjy Ex Uqex Airsw • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.