Used Filtration Device for sale (13,488)

Condition: used, Year of construction: 2020, operating hours: 500 h, functionality: fully functional, machine/vehicle number: DSF-1020 SS, TIMEX Filtration System: TIMEX DSF 1020 SS Drum Stripper Filter Filter Model: TIMEX DSF 1020 SS Drum Stripper Filter Filter Type: Frame Type Nodpfx Aorf U Enja Iewn Flange Standard: EN 1092-1 (DIN2576) PN10 Application: N/A Service Fluid: N/A Capacity: 30 m3 /h Quantity: 1 Unit Inlet TSS N/A Filtration Degree: 2000 µ Filtration Area: 6 m² Drum Diameter / Length: Ø1000 mm / L: 2000 mm Inlet & Outlet Connections: DN150, PN6 Flanged Drain Connection: DN50, PN6 Flanged Working Pressure Min/Max: by Gravity Max. Operation Temp: 55oC Operation Temp: N/A Gearbox Motor Power: 1.1 kW* Required Voltage: 400 V AC / 50 Hz / 3Phz Filter Body / Pipe / Flange Material: SS316L Stainless Steel Filter Screen Material: SS316L Stainless Steel Cleaning Mechanism: Compressed Air + Water Accessories * Control Board (Std.)

Condition: good (used), Year of construction: 1999, The filtration system is used to filter oil (rapeseed, sunflower, soybean oilseeds and others). The system is made to work automatically, it has a command unit that manages the pneumatic valves, and with the help of sensors it controls and manages the work. The system includes a control unit, a piping system with fittings and valves, and a SS filter body. Nsdpfxetxc Hpo Aa Iewn Automatization is completely new and never used!

Condition: used, AR Filtration ARNO-2VF-YA & PRF-K23 Filtration Units. Country of Origin: Italy Nwsdpjxnl Awefx Aa Isn Location: This lot is located in Bornago, Italy.

Condition: like new (used), Device for cleaning die-cut sheets German production, Metabo. 230V power supply. Easy-to-use, manual device for removing external waste from the pallets of die-cut sheets. Safe, two-handed operation of the device. Nwedpewyxi Rjfx Aa Ijn

Condition: used, functionality: fully functional, Total flow of clarified water through PF 1 – 5 or PF 6 – 9 is 400 m³/h. Filter diameter: 3,000 mm Filter media - type PR 1 – 1.6 - Grain size: 1 – 1.6 mm - Bed height: 1,100 mm Operation: Maximum filter capacity: 100 m³/h Nwjdpfxsxcnauo Aa Isn Filtration rate: 14.3 m/h Backwashing: Backwash water flow: 70 m³/h Upflow velocity: 10 m/h Backwash air flow: 385 Nm³/h The PF units are divided into two sections: PF1-5 (old installation) and PF6-9 (new installation). Only one section operates at a time according to operational requirements. The overall workload is approximately balanced, so each section runs about 4,400 hours annually. The sand filters are regularly backwashed after each operational cycle (80 hours) or when the pressure loss reaches ΔP 25 kPa. The system is fully operational. PF Reconstruction: PF1-5: 10.11.2015 – complete replacement of sand, nozzles, and shell surface maintenance PF6-9: 13.7.2018 – complete replacement of sand, nozzles, and shell surface maintenance.

Condition: good (used), Year of construction: 2014, functionality: fully functional, volume flow: 1,000 m³/h, total width: 1,020 mm, total length: 1,680 mm, total height: 2,460 mm, overall weight: 1,540 kg, operating pressure: 10 bar, input voltage: 400 V, power: 14.2 kW (19.31 HP), 1 heat-regenerating compressed air adsorption dryer. The dryer was in use from 2014 to 2017. The system has been out of operation since 2017. The compressed air came from an oil-free Atlas Copco ZR3 compressor with 132 kW. Manufacturer: Donaldson Filtration Deutschland GmbH Type: HRS 1000 Year of construction: 2014 Volume flow at 7 bar: 1000 m³/h (16.66 m³/min) Connection: DN 80 Installed power: 14.2 kW Dimensions length / width / height: 1680mm / 1020mm / 2460mm Weight: 1540 kg Desiccant bottom (20 cm): 3 mm activated aluminum oxide Desiccant middle (40 cm): 2 mm activated aluminum oxide Top desiccant (rest up to the top) silica gel as a ball. The desiccant is already disassembled and immediately available. The desiccant was sucked out of the container with a vacuum cleaner and packed separately in airtight bags. The desiccant is still in a usable condition. It is not oily or soiled. There is the possibility of external re-drying. The TÜV has inspected the inside of the containers and an expert opinion is currently being prepared. Nwodpfx Asr A El Eja Ion "Loose adhesion on the lower part of the dished end" (pictures to follow)

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, filter area: 65 m², volume flow: 6,574 m³/h, Complete unit: cyclone on feet + fan + rotary valve + piping + electrical cabinet. Treated air flow: 6,574 m3/H Filter surface: 65 m2 Filter media: Antistatic polyester 550 g/m2 + oleo/Hydro OWR treatment Nsdpjvdtxcjfx Aa Ijwn New equipment, never assembled, new price 35 K€.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 400 kW (543.85 HP), Ore Beneficiation Plant for Nickel, Copper, Zinc, Graphite, Gold, Silver, Chrome, Quartz/Silica In today’s competitive mining and metallurgical industry, maximizing ore value is critical. Our state-of-the-art Ore Beneficiation Plant offers a complete solution designed to increase the content and quality of raw ore, transforming it into a marketable product ready for further processing or direct sale. Engineered for a wide range of minerals—including nickel, copper, zinc, graphite, gold, silver, chrome, and quartz/silica—our ore beneficiation plant delivers exceptional performance, efficiency, and reliability. Introduction Mining operations around the world face the challenge of processing ores that are often low in grade and require extensive refinement to be economically viable. Beneficiation—the process of increasing the concentration of valuable minerals—plays a vital role in reducing operational costs, enhancing recovery, and ultimately, ensuring profitability. Our ore beneficiation plant, also known as an ore processing plant or mine dressing plant, integrates advanced technology and robust engineering to deliver an efficient crushing, grinding, classifying, and separation process. Designed to handle a wide variety of ores, our plant is the ideal solution for mining companies looking to optimize their extraction and processing operations. Whether you’re processing nickel, copper, zinc, graphite, gold, silver, chrome, or quartz/silica, our plant provides the versatility and performance needed to meet today’s rigorous industrial standards. Nwjdpfx Ajq Nw Uqsa Ien ## What Is an Ore Beneficiation Plant? An ore beneficiation plant is a facility where raw ore is processed to improve its quality and increase the concentration of valuable minerals. The plant typically includes several stages of processing: 1. Crushing: The raw ore is reduced in size to allow for more efficient downstream processing. 2. Grinding: Further size reduction to liberate the valuable minerals from the waste material. 3. Classifying: Separation of the ore into different size fractions using screening and hydrocyclones. 4. Separation: Employing various physical processes such as magnetic separation, flotation, or gravity separation to concentrate the valuable minerals. 5. Dewatering: Removal of excess water to prepare the concentrate for further processing or shipping. This integrated process not only boosts the metal content but also minimizes waste, thereby improving overall cost efficiency and environmental sustainability.

Condition: excellent (used), Year of construction: 2005, It is a precision measuring device for simple and fast measurement of through-hole drills and blind drills of burrs and end mills. This device is indispensable as basic equipment for modern tool shops, sharpening shops and CNC machine operators. The equipment is used in the woodworking and metalworking industries, as well as in glass and stone processing. Everywhere where tool inspection is required. It allows checking the dimensions of the tool its radii or profile and the quality of the cutting surfaces. Nwodpfx Aaju Sbpcs Ion - measuring range: - Z axis 370 mm - X axis 115 mm - Total weight: about 200 kg

Condition: used, Vibratory Bowl Feeder / Sorting Device / Bowl Feeder / Vibratory Feeder RNA Vibratory bowl, sorting device / Screw feeding system with vibratory feeder for screw technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-B200-2L Year of manufacture: approx. 2000 Bowl diameter (top): 200 mm Bowl diameter (bottom): 130 mm Bowl internal height: approx. 25 mm Sorting track width: approx. 3 mm Total height (drive + bowl with sorting track): 225 mm Control voltage: 24 Volt DC (external power supply required) Power connection: 230 Volt, 50 Hz - An external 24 VDC power supply is required for start/stop signals (the controller does not have an internal 24VDC power supply). - REO controller type REOVIB R6 / 439 for adjustable vibration speed - The feeder was used for feeding automotive blade fuses - Mounted on base frame made from aluminum profile system Required space Ø x H: 240 x 250 mm Weight: 17 kg Good condition Nwsdpjxrgvmjfx Aa Ijn A bowl feeder always consists of two main components: 1) Sorting bowl, in which the parts are aligned 2) Drive unit, which generates vibrations in the sorting bowl via mechanical oscillations and thereby moves the parts.

Condition: used, machine/vehicle number: 006082, Max. panel width: 1300 mm Max. panel length: 3000 mm Rotation system: double cone Rotation direction: from transverse to long Nwsdpowaymwefx Aa Isn

Condition: used, Year of construction: 2009, Overview  This complete compressed air installation was manufactured between 2009 and 2013 by Atlas Copco (Sweden) and Donaldson Filtration GmbH (Germany). The setup includes two Atlas Copco GA132 VSD low-pressure compressors, one Atlas Copco FD160 VSD air dryer, and one Donaldson UFA-AC0016 oil separator. Designed to deliver reliable and energy-efficient air supply at up to 8.5 bar, this system is ideal for continuous production environments. The installation has been regularly maintained, with full maintenance completed in August 2025, and is in good working condition. The entire system is still installed and connected, and immediately available for inspection and sale. Technical data  Years of Manufacture: 2009 – 2013 Application: Industrial compressed air system Total Capacity: 2 × 24.1 m³/min Maximum Pressure: 8.5 bar Power Supply: 274.8 kW Scope of Delivery  Compressor | Atlas Copco | GA132 VSD | 2013 Compressor | Atlas Copco | GA132 VSD | 2012 Air dryer | Atlas Copco | FD160 VSD | 2012 Oil separator | Donaldson Filtration GmbH | UFA-AC0016 | 2009 Nwsdpjxrc Acjfx Aa Isn

Year of construction: 2015, operating hours: 13,660 h, condition: used, filter area: 18 m², negative pressure: 2,000 Pa, suction capacity: 13,000 m³/h, Oil mist extraction unit for workshop halls – Plug & Play filtration tower designed for extraction of coolant and lubricant emissions in industrial halls. IVAT Ölnebel-T13K filtration and ventilation tower. Ideal for aerosols, oil mist, emulsion mist, and vapor extraction. Nedpfx Aexnlwzja Ijwn Industrial hall filtration ventilation – suitable for numerous technological processes in manufacturing plants, particularly in metalworking operations. Very often, extraction systems with coolant recovery installed directly on machines are insufficiently effective or simply not present. Machine retooling, frequent opening of machine enclosures, or lack of enclosure at machining heads causes oil mist to escape from machine areas, exposing workspaces and personnel to harmful mist and vapors. Installing a filtration tower significantly improves air quality at workstations and should be considered an ideal filtration and ventilation supplement for halls where fully isolating oil mist using coolant recovery devices is either impossible or very difficult to achieve. Equipped with automatic air and temperature control for the workspace. An innovative PLC control system monitors data and detects threshold exceedances at the workplace, ceiling heat-up, and automatically regulates temperature and air quality. Performance: up to 13,000 m³/h Vacuum: 2000 Pa Filtration area: 18 m² Fan power: 7.5 kW Year of manufacture: 12/2015 Operating hours: 13,660 Stock number: 1054

Condition: good (used), Year of construction: 2016, Stock No.: 503620 Machine/Device Type: Dosing Unit Manufacturer: MOTAN Model: MINIBLEND V-DD1 Year of Manufacture: 2016 Volumetric Dosing and Mixing Unit MINIBLEND V-DD1 with VOLUnet MC1 control unit incl. METRO G 1.5l - HSS suction conveyor Nwsdexrfr Tjpfx Aa Ien The MINIBLEND V-Y1 is mounted directly onto the intake flange of the processing machine, requiring minimal space. A stainless steel insert in the mixing neck divides the main component into two material streams, which merge with the additives before entry to form a homogeneous mixture.

Condition: excellent (used), Precision CNC tool presetting and measuring device from renowned manufacturer KELCH – model Trabant 271-2/M. Equipped with a length and diameter measuring system featuring optics and a KELCH Pico LCD A23 monitor, as well as Heidenhain ND1202T Tool-Chek electronics. Very good condition, complete and fully operational unit. Technical specifications and features: • Manufacturer: KELCH GmbH + Co. Werkzeugmaschinenfabrik, Germany • Model: Trabant 271-2/M • Year of manufacture: 2000 • Measuring unit: KELCH Pico LCD (Version A23) • Display system: Heidenhain ND1202T Tool-Chek • Power supply: 230V / 50–60Hz / 1000 VA • Optical system with measuring camera and LCD screen • Rotary table with holders and two-axis adjustment system • X/Z axis measuring range: up to approx. 400 mm • Axis control from KELCH control panel (joystick + function keypad) • Digital readout, menu in German and English • Complete with original documentation and all connectors Condition: • Used, fully functional • Very clean example from a German toolmaking shop • All axes move smoothly, screen responds correctly • Ready for work Functional description: The KELCH Trabant 271-2/M is designed for fast and precise presetting of cutting tools prior to mounting in CNC machines. The optical system with Pico LCD display allows for measurement of tool length, diameter, and geometry in visual mode. Ideal for inspection and presetting of milling cutters, turning tools, drills, and special tools. Nsdoxn Ax Ajpfx Aa Iswn

Year of construction: 1998, condition: used, temperature: 200-210 °C throughput speed: 1000 mm/min max. workpiece length: 200 mm total power requirement: 50 kw Njdeu Rwauepfx Aa Iewn weight of the machine ca.: ca. 2,0 t - Soldering device for circuit boards (e.g. Type: SMD &/or Composite design) and drying SMD adhesive. - Soldering unit works with functions -->intake - flow - soldering - cooling - With software functions. - Can be integrated in a production line. Further technical details: - Inert gas with Nitrogen 30 m³/h; 6 - 10 bar over pressure - Water requirement: 20 Liter/min; 2 - 5 bar over pressure - Exhaust quantity: 1000m³/h - electr. Operation capacity: 12 kW - room required: L: 6500 + loading station 2000 x W: 1400 x H: 2100mm Supplementary equipment incl.: - Automatic stacker LSB 03 with reloading device and discharge conveyor for intake of e.g. circuit boards - Plant is applicable as spare part deliverer or for refurbishment or rebuild. - Documentation available - Machine is CE98 certified On sale as is.

Condition: used, machine/vehicle number: 007999, Max. panel width: 910 mm Max. panel length: 2180 mm Rotation system: double cone Nodpew Idaiofx Aa Iown Rotation direction: from long to transverse

Year of construction: 2000, condition: used, 3 Stück Dimensions (L/W/H) siehe Bilder mm Njdpfeupmwlsx Aa Iswn weight of the machine ca. . t

Condition: used, Year of construction: 2007, Serial number: H1xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21639 Specifications:• Not certified• Winch• Previously mounted on a boat• 1,680 kg• Needs service before use Description:The crane has been standing for several years. It was functional when purchased.Service and maintenance should be expected before use.Was intended to be used as a quay crane. Nwedpfexq Dt Hjx Aa Isn Own weight: 1680 Model: Heila HMR12-1S kran med vinsj (stått på båt)

Condition: good (used), Year of construction: 2018, Stock No.: 503624 Machine type/Device type: Dosing unit Manufacturer: MOTAN Model: MINIBLEND V-Y1 Year of manufacture: 2018 Volumetric dosing and mixing unit MINIBLEND V-Y1 with VOLUnet MC1 control unit, including METRO G 1.5l - HSS vacuum loader Njdpfx Aajxrflyo Ijwn The MINIBLEND V-Y1 is mounted directly onto the feed flange of the processing machine. This design requires minimal space. A stainless steel insert in the mixing neck divides the main component into two material streams. These merge with the additives just before entry and form a homogeneous mixture.

Condition: excellent (used), Device for precise setting, measurement, and inspection of CNC cutting tools. Equipped with an EZset optical camera system and EZvision (Image Controller 1) software. Condition: very good, complete, ready for operation. Technical data and features: • Model: PRECIsset 400 • Measurement system manufacturer: EZset GmbH & Co. KG, Germany • Control screen: Image Controller 1 • Software: EZvision • Documentation version: 1.1.1 (18.08.2006) • Measuring range X / Z axes: up to 400 mm • Camera with image processing system • Edge, length, and tool diameter measurement function • Results can be saved and printed Njdpfexn Awxex Aa Iown • USB and RS ports • Power supply: 12 V DC, 40 VA • Year of manufacture: approx. 2018–2019 • Supplied with original PRECITOOL technical documentation Condition: • Used, fully functional • Screen operates correctly • Longitudinal/Transverse axes reference correctly • Well-maintained unit from a German tool shop Functional description: The PRECIsset 400 enables fast and repeatable tool setup prior to CNC machining. The EZset vision system allows for blade geometry analysis and tool wear inspection. High measurement accuracy ensured by a stable column and industrial-grade optics.

Condition: used, Die Schmedt PRÄDRY ist ein verlängerbarer Trockner für klebegebundene Buchblocks.  The Schmedt PRÄDRY is an extendable dryer for perfect-bound book blocks. Infrarot-Trockengerät / Infrared drying device Schmedt PräDry HHS 12 Die PRÄDRY ist ein verlängerbarer Trockner für klebegebundene Buchblocks.  Njdpfxoxp H S Ao Aa Iewn Ein dreistufiger Infrarotstrahler (650, 850 und 1.500 Watt) sorgt für eine  schonende und schnelle Trocknung.  Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, machine/vehicle number: 003564, Max. panel width: 1300 mm Njdpfx Ajg E Tg Rea Iewn Max. panel length: 3000 mm Rotation system: double cone Rotation direction: from long to transverse

Condition: good (used), Year of construction: 2018, Stock no.: 503623 Machine type/Device type: Dosing unit Nsdpfoxrfltsx Aa Iewn Manufacturer: MOTAN Model: MINIBLEND V-Y1 Year of manufacture: 2018 Volumetric dosing and mixing unit MINIBLEND V-Y1 with control unit VOLUnet MC1 incl. vacuum conveyor METRO G 1.5l - HSS The MINIBLEND V-Y1 is mounted directly onto the feed flange of the processing machine, requiring particularly little space. A stainless steel insert in the mixing neck divides the main component into two material flows. These combine with the additives before feeding in and form a homogeneous mixture.

Condition: good (used), Year of construction: 2019, Stock No.: 503622 Machine/Device Type: Dosing Unit Manufacturer: MOTAN Model: MINIBLEND V-Y1 Year of Manufacture: 2019 Volumetric Dosing and Mixing Unit MINIBLEND V-Y1 with VOLUnet MC1 Control Device incl. METRO G 1.5l - HSS Vacuum Loader The MINIBLEND V-Y1 is mounted directly onto the feed flange of the processing machine. This ensures it requires minimal space. A stainless steel insert in the mixing neck divides the main component into two material streams. Nwedpsxrfilofx Aa Ijn These flow together with the additives before entering and form a homogeneous mixture.