Used Compactor for sale (476)

Condition: repair required (used), Year of construction: 1987, machine/vehicle number: 90071000, bale width: 300 mm, bale height: 300 mm, overall weight: 15,000 kg, Currently, the “lateral pressure” is stuck because material (sheet metal) has shifted and become wedged under the side block. Fpedpfxoy Tlzao Aatsl

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, pressing force: 2 t, bale length: 1,200 mm, bale width: 500 mm, bale height: 400 mm, bale weight: 100 kg, overall weight: 1,820 kg, This is a fully automatic baling machine that ties the bales with two steel wires (2.2 mm in diameter). A fan blows the waste paper into the machine through special tubes with a diameter of 100 mm. The fan and approximately 10-meter-long tube are included in the price. The machine is in working condition and can be tested. For sale due to lack of use; ideal for baling waste paper from printing and hygiene products. Fpjdoy Ic Ruopfx Aatsl

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler, model MG 50 T.V.E. 1200x1100x3500h, for compacting and baling soft material scraps such as fiberglass mats or similar. The MG 50 T.V.E. model features a fully enclosed compaction chamber, with both the material loading door and bale extraction door capable of opening. The control panel is mounted on the side of the unit with integrated controls, and is equipped with a 10-meter extension cable to allow for placement away from the baler. The pressing plate is operated by a single cylinder with a 2700 mm stroke and is guided by four lateral sliding rails. Material is loaded from the front. The compaction cycle (press descent and ascent) is automatically activated via push button. - For transportation, the machine is manufactured in three parts: one section is 2000 mm high, one approximately 2300 mm high, and the cylinder, which will be assembled on-site. - Bale tying is preset; it is done manually with the doors open. Via slots in the rear of the chamber, tying can be completed with standard pre-cut wire or strapping. - Bale extraction is carried out by forklift, with special channels at the base for the insertion of fork tines. - The bale extraction door is closed via a handwheel, ensuring safe operation even with elastic materials. A safety microswitch ensures the door is securely closed before pressing. The top loading door features a hydraulic lever closure with machine-mounted controls. - The baler can be placed flush against a wall; only front space is required for material loading and bale removal. - The hydraulic circuit is equipped with an anti-fall safety blocking valve for the press plate. - The machine must be anchored to the floor and is placed above a wash liquid collection tray. • Brand / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons • Pressing pressure on material: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: mm 1250 x 1150, variable height (min 800 mm, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Press chamber: mm 1200 x 1100 x 3500 h • Loading opening: mm 1200 x 1800 h • Compactor stroke: 2700 mm, single cylinder Fpodpfx Asyzr Nmeatjl • Operation: Automatic by push button • Cycle time (automatic): 130 seconds • Manual ties: No. 5 • Bale ejection: Removal by forklift • Hydraulic power unit: Integrated into press • Motor power: 10 HP – 7.5 kW • Power supply: 380 Volt – 50 Hz • Overall dimensions: mm 2000 x 3500 x 7150 h • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used hydraulic baler in excellent condition, sold as seen and approved.

Condition: used, mileage: 95,000 km, Year of construction: 2019, Three-axle truck, 26-ton GVWR, 4200 mm wheelbase, equipped with a Mazzocchia MAC2NB series compactor, 11,000 kg payload capacity, ZF manual transmission, Telma electromagnetic retarder, onboard weighing system, rear-view camera, Euro 6 compliant. Please note that the vehicle description is indicative and may contain errors or inaccuracies. We therefore invite you to contact us to verify the accuracy of the data. Fedpfoww Ipuox Aatopl

Condition: used, Year of construction: 2013, Manufacturer: HSM Fodpfozxzxcox Aatopl Type: HL 4010 Li Year of manufacture: 2013 Pressing force: 40 t

Condition: used, Year of construction: 2010, total width: 2,080 mm, total height: 1,900 mm, total length: 2,440 mm, Colour: Grey Briquette press; Höcker Polytechnik BrikStar C 3-19-L 4.3kW, 400V 25kg/h Funnel volume 3m³ Oil tank 50l Dimensions; 2015x2360x1300mm, 830kg - Year: 2010 - Documentation available: Yes - CE certificate present: No - Transport dimensions: 2440mm x 2080mm x 1900mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Fpodpexqdxcjfx Aatol Yorick Diebels

Condition: used, Year of construction: 2015, Manufacturer: HSM Model: HL 4010 Li Year of manufacture: 2015 Pressing force: 40 t Fpjdezxzv Uopfx Aatsl

Condition: used, Year of construction: 2018, Bale press and performance data Pressing force: 480 kN Specific pressing force: 58 N/cm² Drive power (motor): 11 kW Voltage/frequency: 400 V / 50 Hz (three-phase) Cycle time in idle mode: 35 seconds Theoretical throughput in idle mode: 32.81 m³/h [1] Bale and loading dimensions Maximum bale weight: up to 420–430 kg (depending on material and density) Bale dimensions (L x W x H): 1200 x 1100 x 750 mm Feed opening (W x L): 1020 x 900 mm (ideal for large boxes) Binding method: manual, with 4-fold wire wrapping Fpodpfx Aezxzw Ejatjl Net weight of the machine: 5900 kg (5.9 tons)

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, pressing force: 59 t, filling opening width: 1,190 mm, filling opening length: 600 mm, bale length: 1,180 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 350 kg, total width: 1,059 mm, total height: 2,871 mm, total length: 1,838 mm, type of input current: three-phase, input voltage: 400 V, input current: 16 A, overall weight: 2,300 kg, warranty duration: 6 months, transport height: 2,050 mm, power: 4 kW (5.44 HP), year of last overhaul: 2026, transport width: 1,059 mm, transport length: 1,838 mm, protection type (IP code): IP54, input frequency: 50 Hz, stroke length: 890 mm, Equipment: documentation/manual, Brand: Strautmann Umwelttechnik GmbH The stated price is exclusive of statutory value-added tax, ex works and without packaging. The press has been cleaned, functionally tested, repaired and equipped with a new control system in accordance with EN16500. Fpedpfx Asv Rzwmjatel All replacement parts used are original parts from Strautmann. Technical details: Manufacturer: Strautmann Umwelttechnik Type: PP 1207 Bale dimensions (L x W x H): 1180 x 700 x 800 mm External dimensions (L x W x H): 1838 x 1059 x 2871 mm Transport height: 2050 mm Feed opening: 1190 x 600 mm Pressing force: 59 tons / 580 kN Throughput: 1 - 2 bales / hour Number of belt channels: 4 Binding material: Wire Weight of the press: 2,300 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation location: indoors / outdoors, covered Includes starter kit for bale strapping, 19mm Serial number: 610.00.184 Year of manufacture: 2003

Condition: used, Year of construction: 2015, Manufacturer: HSM Type: HL 4010 Re Year of manufacture: 2015 Fpjdpfxszxqpdo Aatol Pressing force: 40 t

Condition: used, Year of construction: 2014, Manufacturer: HSM Type: HL 4010 Re Fedpfxozxqkzo Aatopl Year of manufacture: 2014 Pressing force: 40 t

Condition: good (used), Year of construction: 2011, operating hours: 23,105 h, functionality: fully functional, Soon available Baling press Macpresse MAC 105, pressing force 70 t, year of manufacture 2011 Technical data: Manufacturer: Macpresse International S.R.L., Milan / Italy Type: MAC 105 Year of manufacture: 2011 Operating hours: as of 09/26: 23,105 Pressing force: 70 t Drive power: 45 kW Mains voltage: 380 V / 50 Hz Feed opening: 1500 x 750 mm Press chamber volume: 1.5 m³ Bale size: 1100 x 800 mm Throughput / mixed paper: 15 t/h Tying: 5-strand horizontal Transport dimensions: approx. 9,500 x 1,800 x 2,500 mm (L x W x H) Press weight: approx. 16,000 kg Accessories: Hopper Note: The press is expected to be dismantled in mid/late September and can be inspected in operation until then, if desired. The conveyor belt shown in the photos is not included in the scope of delivery and can be purchased as an option. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, prior sale is reserved, and can be revoked at any time. Inspections are possible by arrangement. Fedpfozyl Htjx Aatepl The sale is made against prepayment, ex works, without any warranty.

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 24559, pressing force: 34 t, total width: 2,400 mm, total length: 6,500 mm, total height: 2,400 mm, overall weight: 4,635 kg, filling opening length: 1,000 mm, filling opening width: 1,900 mm, power: 5.5 kW (7.48 HP), Neat press container Fjdpewcdrcefx Aatepl Husmann SPB20SEN Lifting tilting system for 660 liter roll containers Lifting tilting system raised for 1,200 mm high platform Unloading flap

Condition: excellent (used), Year of construction: 2017, operating hours: 2,000 h, functionality: fully functional, overall weight: 14,000 kg, tank capacity: 20,000 l, input voltage: 230 V, usable tank capacity: 20,000 l, empty load weight: 4,435 kg, For sale: Compoman K 1812/20 baling press – a robust and reliable waste management solution! Technical specifications: Brand/Manufacturer: Compoman – a renowned manufacturer of baling presses and waste management solutions, known for their durability and high-quality construction. Model: K 1812/20 Type: Stationary-transportable baling press, designed for loading, compacting, and transporting municipal, industrial waste, and recyclable materials. Year of manufacture: 2017 Fpjdjzym Ekjpfx Aatsl First registration: 2018 – used at a single location since then, in perfect working order. Working capacity: 20 m³ – enables the accumulation of large quantities of waste while maintaining compact dimensions. Payload: 9,565 kg – allows for economical and efficient transport of large quantities of material. Own weight: 4,435 kg – a solid steel construction guaranteeing stability and durability. Maximum permissible weight: 14,000 kg – compliant with transport standards, suitable for use with most standard hooklift vehicles. Hydraulic system: in good working order, regularly maintained, providing high compaction force. Loading system: compatible with standard hooklift vehicles. Technical condition: very good – no major damage, mechanically sound and visually well-maintained. Advantages of purchase: Ready for immediate use. High compaction efficiency – saves time and costs. Robust construction – equipment for years of intensive use. Regularly serviced, used as intended. An ideal solution for companies involved in waste management, recycling, production plants, logistics centers, or shopping malls. This is a great alternative to new equipment – attractive price, quick availability, and proven quality. The price stated in the advertisement is the NET price + 23% VAT. Or for export.

Condition: ready for operation (used), Year of construction: 2015, Manufacturer: HSM Model: HL 4010 Li Fedpfx Asyhbxcsatopl Year of manufacture: 2015 Pressing force: 40 t

Condition: ready for operation (used), Dixi 60s bending machine, model year 2018-2019 Pressing force: 60 tons Beam dimensions: 120 x 80 x 110 cm Machine dimensions: 1900 x 1400 x 2200 mm (height) Machine weight: approx. 2430 kg Beam weight: up to 500 kg Oil heating Motor: 7.5 kW Fodpfx Ajv Alacjatspl

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: V309866-20, pressing force: 126 t, filling opening width: 1,620 mm, filling opening length: 1,000 mm, bale length: 1,800 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 650 kg, total height: 7,034 mm, type of input current: DC, input voltage: 400 V, overall weight: 43,000 kg, noise level: 85 dB, pressure: 280 bar, oil tank capacity: 2,700 l, power: 160 kW (217.54 HP), empty load weight: 43,000 kg, protection type (IP code): IP55, stroke length: 2,900 mm, Equipment: documentation/manual, Fpedpfx Aoznm H Dsatol

Condition: used, Year of construction: 2015, Manufacturer: HSM Model: HL 4010 Re Fpjdpfx Asyibv Ijatjl Year of manufacture: 2015 Pressing force: 40 t

Condition: excellent (used), Year of construction: 2020, Baling press, MACFAB, – used –: Price ex works: €13,500.00 (net)! Manufacturer: MACFAB Systems Ltd Type: BMF650 Auto HT RAL - MM9.8 Year of manufacture: 01/2020 Serial number: MF J144 Weight: 1770 kg Operating hours: approx. 16h Automatic operation & "Bale ready" indicator Horizontal door that pivots to the side Surface / Color: RAL6018 Fpedjzxciiepfx Aatel Feed opening: 1,500x880x769mm (WxHxD) Dimensions, press: 2,100x1,524x3,217mm (WxDxH) Former new price: €18,921.00 Condition: The machine was only used once for testing purposes. Available: immediately Location: 72336 Balingen

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 26 t, overall weight: 1,080 kg, Equipment: documentation/manual, In perfect condition, tested and fully equipped. New hydraulic hoses, new oil, and new gas springs for the doors. Fjdpfx Aeztgnxoatopl

Condition: used, mileage: 1,66,000 km, first registration: 11/2009, Year of construction: 2009, DB Sprinter 515 CDI Side-Loading Garbage Compactor Truck !! Right-hand drive!! CHASSIS: • Emissions class: EURO 5 EEV • Air conditioning • Rotating beacons • ASR deactivatable • 6-speed manual transmission • Driver's airbag • Central locking • Electric front door lock • Electric mirrors • Rearview camera • Headlight leveling • CD radio • Unladen weight: 3,825 kg • Gross vehicle weight: 5,000 kg • Payload: 1,175 kg • Tires: 205/75 R16C • Tire tread: 10 mm average • Vehicle dimensions: 5,990 x 2,250 x 2,500 mm BODY: Hagemann & Partner • Type HG 5 SL 240 • Year of manufacture 2009 • Garbage compactor body • Container mount on the right • Suitable for 80, 120, and 240 liter trash cans • Hydraulic tailgate / Dump truck for emptying, using the trash pusher - Good overall condition! - Ready to use! - First owner! - German vehicle! - MOT/AU inspection available upon request and for an additional charge: new! Fjdpfx Aaewmpkletepl Subject to errors and prior sale!

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 105102558/89, overall weight: 750 kg, Continuously fillable compactor with rotating roller Fjdpfxozr H Ags Aatjpl collects, shreds, and compacts waste using a special steel roller, which ensures a compaction ratio of up to 9:1. It compacts the waste through alternating left/right rotation of the special roller, which continuously applies pressure to the material being fed in. It enables continuous feeding – the compacted waste remains in a transparent PE bag. The compaction station can be installed directly at the point of waste generation within the premises. It is also ideal for continuous filling via chutes or conveyor belts and is easy to operate. CE standards requires particularly little maintenance.

Condition: used, Year of construction: 2005, total width: 1,300 mm, total height: 3,850 mm, total length: 2,200 mm, Colour: Grey Empty weight: 1.250 kg Price: On request - Year: 2005 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 308 - Transport dimensions: 2200mm x 1300mm x 3850mm (l x w x h) - Transport weight [kg]: 1250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Fpjdpfxsyrtcuo Aatsl Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Used stainless steel Hosokawa Bepex MS75 compactor with associated PC-D400 prebreaker and cyclone feed hoppers. Rolls measure approximately 560mm diameter x 190mm length. Unit has a maximum compression of approximately 785kN. Unit is driven by a 54kW 50Hz motor. Unit includes HMI controls. Unit is mounted on a steel frame. Fsdpfxszn Ivgo Aatopl

Condition: used, Year of construction: 2013, We are offering this used AMIS ZBP 400 briquetting press, manufactured in 2013. We also include a Forst ARJES ZWS 110 wood shredder with a conveyor belt. However, these can also be sold separately. Amis Manufacturer: Amis Model: ZBP 400 Year of manufacture: 2013 Condition: used Machine type: Briquetting press Forst Shredder ZWS 110 with 30 kW motor 20 mm screen with electrical system with segmented base and slide with toothed rail Slide with roller guide Preparation for conveyor belt discharge Inclined conveyor belt Fpodpfx Aezp Eyfsatol AA = 1700 horizontal AA = 4500 vertical Belt width = 580 mm with PVC belt with metal-free zone with 1.5 kW drive If you have any questions or require further information, please feel free to send us a message or call us.