Used Weber Cf 2 for sale (105)

Condition: like new (used), Year of construction: 1990, Wide belt sander WEBER OFZ-2-1350 working width 1350 mm number of aggregates 2 Knodegm Tqwepfx Aabec 1. sizing roller with the engine with power 18,5 kw 2. aggregate with the viscera with the power 11 kw brush with the power of 11 kw sweeping brush smooth regulation of feed speed weight of the machine: 2700 kg

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Saw for profiles, used Manufacturer: Weber - Kronach Type: PS 2 Year of manufacture: 2002 Profile section: max. 200 x 100 mm (W x H) Saw blade diameter: 400 mm Connection load: 5,0 kW. Knsdpfsw Up Rmsx Aaboc Spannung: 400 V, 50 Hz Condition: very good, like new

Condition: used, Year of construction: 1990, Used Weber wide belt sanding machine with 2 sanding belts, oscillating. Infinitely variable feed speed. Sanding width 900 mm. Used as a backup machine. Kodpfx Aaewzlqksbjnc

Condition: ready for operation (used), Year of construction: 1995, The machine was in operation until the company closed down about 12 months ago. 2 sanding belts + brush Kodpfx Aasw E Dziebonc

Year of construction: 2001, condition: excellent (used), Single screw extruder WEBER NE5 1-30:D with 2 co-extr. WEBER ZE30 Year of construction 2001 Knjdpfehy Tp Dex Aabec Screw diameter 50 mm Application:PE-PP, Three-layer pipes or pipes with colored stripes The plant has manufactured heating pipes Condition: very good 2 Co-Extruders WEBER ZE30 Screw diameter 30mm The three-layer pipe system is my property Location: Sachal EXTRUSIONSMACHINEN D-26345 Bockhorn/Grabstede, Germany

Condition: used, tank capacity: 60,000 l, Location: Bremen Condition: used Volume: 60,000 litres Vacuum: 0.2 bar Max. overpressure: 1.5 bar Tank Max. operating temperature (vessel): 200°C Design: vertical Tank Support type: legs Number of legs: 4 Heating/cooling: available Double jacket volume: 105.0 litres Max. allowable operating overpressure (jacket): 6.0 bar Max. allowable operating temperature (jacket): 250°C Heating/cooling jacket Bottom temperature control: half-pipe coil Insulation: available Insulation Insulation cladding: bolted Insulation material: mineral wool Cladding material: aluminium Internal diameter: 3,000 mm External diameter: 3,200 mm Cylindrical height: 9,000 mm Overall length: 12,300 mm Technical data / dimensions Bottom wall thickness: 10 mm Kodpfx Aexqb Rvsabsnc Cylinder wall thickness: 5 mm Technical data / dimensions Top wall thickness: 7 mm Technical documentation: drawing Equipment Manhole / dome: in cylinder, in top, in top (DN 600) Nameplate: Fittings: crane lugs Equipment Outlet: flange DN80 Note: dents on insulation cladding, manhole cover clad Remarks: cylinder manhole NW 600; small sheet cut-outs in insulation cladding Last use: rapeseed oil Product-contact material: V2A 1.4541 (AISI321) Material specification Temperature control system material: V2A 1.4301 (AISI304) Leg material: steel

Year of construction: 2017, condition: excellent (used), Bluhm weber legi-air 4050 labeling machine More pieces in stock! year built: 2016-19 Print resolution 8 dots/mm (203 dpi) 12 dots/mm (300 dpi) 24 dots/mm (600 dpi) Knodefp A I Ejpfx Aabjc Print speed Up to 400 mm per second Tamp sizes (mm) Tamp-Blow standard of 12.5 x 7 to 160 x 300 mm, label lengths must be limited in accordance with label quality, longer or smaller labels are possible using special tamps Label gap Minimum 3 mm Label roll 300 mm diameter, up to 450 running meters, core 76 mm (3"), outside winding (optional inside winding) Data interfaces RS232, RS422, RS485, Ethernet Optional: Profibus Dimensions (L x H x W) 770 x 560 x 580 mm, Applies to system with 250 mm stroke Display controller Multi-language operator guidance 5.7" VGA touch display Service interval indicator Polling, editing and saving of label data USB connection for memory medium or keyboard Compressed air connection 6 bar, the compressed air must be clean, dry and oil-free

Condition: excellent (used), From 2022 with complete documentation and with Zebra ZE500 printer. Good as new. Knodpevt An Sofx Aabsc

Condition: excellent (used), Year of construction: 2016, operating hours: 36,000 h, functionality: fully functional, Very well-maintained machining center from Burkhard und Weber, year of manufacture 2013. Location: Baden-Württemberg Basic data as attached; specific documents (order confirmation) only upon request. Model: MCR 1100 Working area (X/Y/Z): 1600/1250/1250 mm Optional working area (X/Y/Z): 1600/1500/1600 mm Workpiece clearance diameter x height: 1600 x 1750 mm Standard pallet size: 800 x 1000 mm Maximum pallet load (optional): 4000 kg Knodpfxjxnz Rws Aabjc Rapid traverse (standard axes): 30/30/30 m/min Spindle power (100% duty cycle): 52 kW Maximum torque (100% duty cycle): 1720 Nm Speed range: 20 to 5500 rpm (optional 10,000 rpm) Number of tool pockets: 128 to 800 Max. tool weight: 60–75 kg

Year of construction: 2018, condition: like new (used), Weber screwing system: - Screw bunker with orientation and feeding system - dosing system - pneumatic feeding system - screwing gun - festo pneumatic gun travel operation system - frequency regulator 4 complete, barely used, systems for sale. Price is per set / negotiable. Screwing gun heads can be changed and adapted for multiple different types of screws. Contact for more information. Kodoif Rvaopfx Aabonc

Condition: used, functionality: fully functional, fuel type: gasoline, overall weight: 32 kg, DGUV certified until: 03/2026, Year of construction: 2018, machine/vehicle number: 20008074, Equipment: UVV, Specifically designed for compaction of pipe collars in trenches. Other areas of application: compacting edge zones of walkways; installation of drainage systems. Due to its low weight, it is easy, flexible, and safe to operate even on slopes and in very confined spaces. Kjdpfxoxpu Tbs Aabonc

Condition: used, tank capacity: 630 l, Location: Bremen Condition: used Capacity: 630 liters Vacuum: 1.00 bar Max. overpressure: 6.00 bar Vessel Max. operating temperature vessel / °C: 300 °C Top head: removable/top-opening design: suspended Vessel Support type: ring Ksdpfjxqba Djx Aabenc Heating/cooling: available Jacket volume: 14.5 liters Max. permissible operating overpressure: 32.0 bar Max. permissible operating temperature: 300 °C Cylinder temperature control: half-pipe coil Heating/cooling jacket Bottom temperature control: half-pipe coil Internal diameter: 1,000 mm Cylindrical height: 800 mm Total height: 2,000 mm Technical data / dimensions Bottom wall thickness: 15.3 mm Cylinder wall thickness: 7.8 mm Technical data / dimensions Top head wall thickness: 15.8 mm Equipment Manhole / dome: handhole Nameplate: Equipment Outlet: flange DN50 Remarks: support ring and vessel flange made of Fe; handhole cover plated Previous application: chemical industry Product contact material: V4A 1.4571 (AISI316) Jacket material: V4A 1.4571 (AISI316) Agitator: anchor agitator Agitator Agitator arrangement: central in top head Agitator features: motor/gear unit missing

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Knsdpfx Aoxf Up Ueaboc Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: used, Year of construction: 2007, Technical details: x-travel: 1100 mm y-travel: 900 mm z-travel: 1250 mm Knodpexp Hgtsfx Aabec milling head speed: 1 - 10000 U/min pallet size:: 630 x 630 total power requirement: 37 kW

Condition: good (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. - Hydraulic shears. - Arm spreader. - Hydraulic pump. Knodpfxjvgnr Aj Aabec

Condition: as good as new (ex-display), The scope of delivery includes: 01x waste container, second choice Manufacturer: Weber Depth lid closed: 755 mm Depth lid open: 770 mm Kedpfxjku Aw Ns Aabsnc Height 1,320 mm Lid closed Total width: 1,350 mm Capacity: 360 kg Volume: 770 liters Further data / information: Material color of garbage can: black Lid material color: yellow Usable width: approx. 1,085 mm Usable depth: approx. 640 mm Usable height: approx. 1,000 mm Material: polyethylene (PE) Tires: 4 tires (2x braked) Tare weight: 68 kg Note: Effective width and effective depth are tapered towards the bottom. General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Knsdpfx Aasxlcfksboc Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Condition: used, tank capacity: 10,875 l, Location: Bremen Condition: used Capacity: 10,875 liters Vacuum: 1.0 bar Max. Overpressure: 6.0 bar Tank Max. Operating Temperature (Tank): 200°C Design: suspended Tank Support design: ring base Heating/cooling: available Double jacket volume: 330.0 liters Max. permissible operating overpressure (jacket): 20.0 bar Heating/cooling jacket Max. permissible operating vacuum (double jacket / tube space): 1.0 bar Max. permissible operating temperature: 220°C Cylinder tempering: half-pipe coil Heating/cooling jacket Bottom tempering: half-pipe coil Internal diameter: 2,170 mm Cylindrical height: 2,200 mm Total height: 5,050 mm Technical data / dimensions Bottom wall thickness: 11.4 mm Cylinder wall thickness: 8.7 mm Top wall thickness: 14 mm Equipment Manhole/dome: on top head Nameplate: Accessories: crane lugs Equipment Discharge: present Discharge (alternative specification): 100 mm Note: slight adhesions, manhole cover missing Knjdpfx Ajxqa Nweabec Remarks: Support ring made of Fe; some of the top head flanges were welded by the previous owner from the inside with a stainless steel plate (and some of these plates were cut to create an opening; see photos); manhole diameter 480 mm Last application: adhesive industry Product-contacting material: V2A 1.4541 (AISI 321) Double jacket material: V2A 1.4301 (AISI 304) Material properties Flange material: steel Agitator Agitator manufacturer: Ekato Power: 22 kW Speed: 78 rpm Agitator type: anchor agitator Agitator seal: mechanical seal with thermosiphon vessel Agitator Voltage: 230/400 V Agitator mounting: centered on top head

Condition: used, Year of construction: 2017, controller model: , _____ Description: Year of manuf. : 2017 Material thickness : 100 mm Material size : 1350 mm Working area Maximum clear passage width:1350 mm Sheet thickness range:0.3 to 100 mm Stepless adjustable feed speed:0.5 to 10 m/min Kedpfx Aasw Ubt Hsbsnc :Electric sheet thickness adjustment :Electric tool positioning Power supply Operating Voltage:Three-phase 400 V with neutral and protective earth (3 x 400 V/N/PE) Frequency:50 Hz Power Consumption:36 kW Supply Line Fuse:63 A Supply Cable Cross-Section:16 mm² Control Voltage:24 V DC Short-Circuit Current Rating:10 kA Machine Weight:approx. 3,500 kg Dimensions (W/D/H):approx. 2,120 x 3,093 x 2,400 mm Aggregates / Units / Stations Contact Roller Unit:Adjustable working speed from 3 to 18 m/s Multi-Rotation Brush R2:Equipped with 3 brush heads, each with 2 brushes Conveyor Belt Cleaning:Dry cleaning system Vacuum System:Integrated vacuum with a 5.5 kW blower Workpiece Thickness Measurement:Automatic height detection Extraction System:No extraction unit included

Year of construction: 1997, condition: used, functionality: fully functional, machine/vehicle number: DS 70 087, WEBER DS 7.22 Twin Screw Extruder Kodpfx Asxghz Hsabenc

Condition: excellent (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. - Hydraulic shears. - Arm spreader. - Hydraulic pump. Knedpfjvgnttex Aabjc

Year of construction: 1993, condition: used, Cutting depth 220 mm weight of the machine ca. 375 kg Kodpfx Ajw Syiboabonc +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1986, machine/vehicle number: 8240, Bandanzahl : 1 max. Arbeitsbreite : 1100 mm max. Arbeitshöhe : 150 mm 1. Band : Kombiaggregat Ausführung 1. Walze : Stahlkontaktwalze Schleifschuh 1. Aggregat : starr, höhenverstellbar Schleifbandlänge 1. Aggregat : 2500 mm Schleifbandbreite 1. Aggregat : 1150 mm Antrieb Aggregat 1 : 15 kW Steuerung : Handbedienpult Elek./pneu. Bandoszilation : Ja Einlasshöhe : variabel (unterer Tisch verfährt) Tischhub : elektro-motorisch Ksdpfx Aaewaukdjbsnc Tischanzeige : digital Betriebsdruck : 7 bar Arbeitshöhe bzw. Aufgabetischhöhe : 850 mm Beschreibung : neuer Teppich Gewicht ca. : 1700 kg

Year of construction: 1991, operating hours: 1,02,364 h, condition: good (used), This extrusion line from Hans Weber GmbH is in machine storage at Plastima Used Machinery. The line is from 1991 and is in used but good condition. - Brand: Hans Weber GmbH Knedpjqpft Ijfx Aabec - Model: WEBER DS 6.5 - Year of construction: 1991 - Screw Ø: 65 mm - Working hours: 102.364

Condition: excellent (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. Knsdpfx Aasvgnhwoboc - Hydraulic shears. - Arm spreader. - Hydraulic pump.