Used Control Box for sale (54,424)

Condition: excellent (used), Here we offer a KUKA robot with control unit. KUKA robot VKR 16 R1610-2 Control unit VKRC4-SC5 KUKA smartPAD hand-held programming device Robot comes from school and Research Department Hour meter first. 226,25 Axis data: Range of motion A1 ±185 ° A2 185 ° / 65 ° A3-138 ° / 175 ° A4 ±350 ° A5 ±130 ° A6 ±350 ° Speed at nominal load A1 200 ° / sec A2 175 ° / s Kdjdpfx Aaed H E H Redjw A3 190 ° / s A4 430 ° / s A5 430 ° / s A6 630 ° / s Technical data: Maximum range 1612 mm Maximum load 20 kg Nominal payload 16 kg Nominal payload carousel / arm / arm 0 kg / 0 kg / 10 kg Repeatability (ISO 9283) ± 0.04 mm Number of axes 6 Installation location ground; Ceiling; Wall; any angle Footprint 430.5 mm x 370 mm Weight 245 kg Condition: pre-owned / used Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you.

Condition: used, mileage: 5,87,258 km, power: 309 kW (420.12 HP), first registration: 07/2017, overall weight: 26,000 kg, fuel type: diesel, color: green, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, loading space volume: 48 m³, loading space width: 2,470 mm, loading space length: 7,860 mm, loading space height: 2,465 mm, total width: 2,550 mm, total height: 3,700 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, tail-lift, Box body with side sliding tarpaulin, plastic floor with non-slip surface, reinforced in the rear area with aluminum checker plate, Multi Lock outer frame, Palfinger tail lift type: MBB C 2500 L, max. load capacity 2500 kg, ZF - Intarder, EEV, differential lock rear, adaptive cruise control, ABS, ASR, ESP, MAN BrakeMatic, Emergency Brake Assist (EBA), cruise control, reversing camera, automatic climate control, additional warm air heating, navigation system, multifunction steering wheel, driver's comfort suspension seat, outside mirrors heated and electrically adjustable, electric. Window lifter driver and passenger door, roof hatch, automatic daytime running lights, air suspension with lifting and lowering device front and rear, trailing-steered lift axle, Duo-Matic brake connections, tow bar ring spring, tank approx. 600 liters, AdBlue tank approx. 60 liters, vehicle can be covered with advertising and/or labeled Kdedpswxkk Rofx Aadow Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to make you a financing or leasing offer for this object. Please contact us!

Condition: used, mileage: 2,80,000 km, Year of construction: 2016, Serial number: WDB9630031004xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21718 Specifications: 2016 model Kdsdoxu Av Uopfx Aadow Mileage: approx. 280,000 18 pallets Euro 6 Wheelbase: 580 cm 4x2 354 hp Full air Engine brake Tires (see pictures) Winter tires Thermo king unit Zepro lift Remote control Tool cabinet Compressor horn AC/climate Bed Radio Ready for delivery   Description: 2016 Mercedes Actros 1835 box truck with full side opening. New batteries were installed on the car this year. The lift may have some bolts that need to be replaced. Owner has some pillows that will come with it. Ready for delivery. Km: 280000 HK: 353 Technical approved: Yes EU-approved until: 22.01.2026 Own weight: 11540 Euro: 6 Model: Actros 1835 skapbil m/ Full sideåpning, aggregat, lift og 2 sett dekk Number of pallets: 18

Condition: used, functionality: fully functional, mileage: 83,890 km, power: 103 kW (140.04 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, empty load weight: 2,165 kg, maximum load weight: 1,335 kg, first registration: 08/2022, next inspection (TÜV): 06/2027, loading space length: 4,000 mm, loading space width: 1,750 mm, loading space height: 1,900 mm, emission class: euro6, color: white, number of seats: 3, number of previous owners: 1, machine/vehicle number: DEG-BZ17, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), onboard computer, power assisted steering, sliding door, soot filter, truck registration, Special equipment: Kdjdpfxjxvc Ere Aadsw Audio system: Radio with Bluetooth/audio interface MP3 + DAB+, vehicle key (2) both foldable, rear wing doors without glazing (opening angle 270 degrees) Additional equipment: Driver's airbag, driver assistance system: hill start assist, generator 180 A, body/design: high-roofed van, body variant: vehicle length L4, body variant: high roof (H2), L4H2, 3.5 t, reinforced, closed cargo area partition (without window), adjustable steering column (steering wheel), engine 2.2 L - 103 kW CDTI, wheelbase 4035 mm, low emission according to Euro 6d standard, steel wheels 6x16, interior trim in the load/FG area: half-height

Condition: excellent (used), Here we offer you an industrial robot. Max. Load capacity: 6 kg Type: RX90 Control unit RX90 - CS7 approx. weight 360kg condition: used / used Scope of delivery: (see picture) Kdsdpfx Aofb T Iieadow (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: used, maximum load weight: 4,010 kg, overall weight: 6,750 kg, axle configuration: 1 axle, first registration: 04/2016, loading space length: 7,300 mm, loading space width: 2,400 mm, loading space height: 2,440 mm, loading space volume: 43 m³, total width: 2,550 mm, total height: 3,550 mm, Equipment: ABS, Box body, galvanized chassis, BÄR tail lift type: BC1000 S4-A4, max. load capacity 1000 kg, NATO jump-start socket, support winch(es), storage box, spare wheel holder under superstructure, ABS, EBS, BPW axle(s), drum brake system, air suspension with lifting and lowering device. The vehicle may feature advertising decals and/or lettering. Our offer generally does not include new TÜV inspection. If a new TÜV inspection is required, we are happy to provide an offer through our partner workshops! The vehicle may have advertising decals and/or lettering. Our general terms and conditions of delivery and payment apply. We are happy to provide you with a financing or leasing offer for this vehicle. Kdsdpow Erzqofx Aadow Please contact us!

Condition: not inspected (used), Epson Type: G20-A01SR / RC180 Epson SCARA robot with Epson robot control Epson SCARA G20 Long arm with high force The G20 manipulators are suitable for very high loads, Kedpovx S Rtjfx Aadjdw such as heavy components or packaging units with a high weight (up to 20 kg). Epson G20 Max. load: 20 kg Range: 850 / 1,000 mm Z-stroke: 180 / 420 mm Epson control RC180 Condition: untested / replacement defective! Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Objet Stratasys Model: Objet260 Connex 2 Stratasys Objet260 Connex 2 3D Printer + Cleaning Glovebox Computer, Monitor, Software: Objet Studio Ver. 9.2.11.6825 The Objet260 Connex 3D printers from Stratasys are based on PolyJet technology and allow you to combine two or three base resins in a single print run, allowing you to create prototypes from three materials, as well as simulate overmolding or populate build plates with selected models. Using triple-jetting technology, the Objet260 Connex creates prototypes with up to 27 material properties simultaneously in a single part. The device enables high-resolution 16-micron layers for printing complex geometries, smooth surfaces, and thin walls. Model Materials: Solid and opaque (VeroWhitePlus, VeroBlackPlus, VeroGray, and VeroBlue) Rubber (Tango family) Transparent (RGD720 and VeroClear) Simulated polypropylene (Endur and Durus) Biocompatible (MED610) Heat-resistant (RGD525) Digital Materials: Digital ABS and Digital ABS2 Wide range of light transmission values Rubber compounds with a range of Shore A hardnesses Simulated polypropylene materials with improved heat resistance Applications: Visual prototypes Functional prototypes Equipment and devices Architectural models Medical models Injection molds Concept models Technical specifications: Build volume: 255 × 252 × 200 mm Layer thickness: Horizontal layers of only 16 µm Resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi Accuracy: 20 to 85 µm for components smaller than 50 mm; up to 200 µm for the full model size (only for solid materials, depending on geometry, design parameters, and model orientation) Size and weight: 870 × 735 × 1200 mm; 410 kg AC connection: Kdsdpjv Rw Etsfx Aadew 100–120 VAC, 50–60 Hz, 13.5 A, single-phase Or 200–240 VAC, 50–60 Hz, 7 A, single-phase Condition: used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you a control unit. Kdjdpfx Aajpgul Esdjw Control unit for RIVSET self-pierce riveting system Operating voltage: 400V 50 Hz Rated current: 13A Main fuse: 20 A Control voltage: 24 V Signal voltage: 10 V Year of manufacture: 2011 with Hydac cooling unit OK-EL2S/3.0/M/400-50/1 Type: 6039402 The system was for inspection at the manufacturer and is functional. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), Vötsch Model: VCS 7130-10 Vötsch Climate Test Chamber, Water-cooled Specifications for Temperature Testing: - Temperature range: -70°C to +180°C - Temporal temperature deviation at the center of the usable test volume: ±0.3 to ±0.8 K - Spatial temperature deviation: ±0.5 to ±2 K - Temperature gradient: 1 to 4 K - Temperature change rate: - Heating: 11 K/min - Cooling: 10.5 K/min Specifications for Climatic Testing: - Temperature range: +10°C to +95°C Kedpfewynmxex Aadedw - Humidity range: 10 to 98% RH - Temporal temperature deviation at the center of the usable test volume: ±0.2 to ±0.5 K - Spatial temperature deviation: ±0.5 to ±1 K - Temperature gradient: 1 to 2 K - Temporal humidity fluctuation at the center of the usable test volume: ±1 to ±3 % RH Technical Data: - External dimensions (with hinges and door lock): - Height: 1995 mm, Width: 1680 mm, Depth: 1855 mm - External dimensions (without hinges and door lock): - Height: 1995 mm, Width: 1300 mm, Depth: 1855 mm - Internal chamber dimensions: - Height: 950 mm, Width: 1100 mm, Depth: 950 mm - Test chamber volume: approx. 1300 liters Feedthroughs: - The chamber is equipped with feedthroughs on both the right and left sides, allowing measurement cables and test devices to be routed into the test space. - 1 x R1 NW 125 mm - 1 x L1 NW 50 mm Test Chamber Lighting: - Halogen bulb 24 V, 50 W Electrical specifications: - 3/N/PE AC 400V ±10% 50Hz - Rated power: 34.0 kW - Rated current: 50.0 A - Fuse (to be provided on site): 100 A slow-blow - Max. heat emission to environment: 2.2 kW Permissible Test Specimen Weight: - Total load on grate supports: 100 kg - Chamber floor: 150 kg; Inserted rack: 50 kg Refrigerants: - R 404A / R 23 Weight: 1600 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After a successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical data and information!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Stäubli Measuring Robot Here we offer a very well maintained Stäubli measuring robot. Measuring robotics to measure, analyse and evaluate quality features RobFlow (measuring robotics software) full version and dongle on integrated Siemens industrial PC 6AG4114-1NC22-4EX0 Laser Distance Sensor Model ILR 1181-30 Technical data: Measuring range 0.1 ... 50 m on natural, diffuse reflecting surfaces, 50 m to a maximum of 150 m on reflector panel Linearity ±2 mm (+15°C ... +30°C), ±5 mm (-10°C ... +50°C) Resolution 0,1 mm Repeat accuracy ≤ 0.5 mm Response time 100 ms ... 6 s (ILR 1181-30) 20 ms ... 6 s (ILR 1182-30) Laser according to IEC 825-1 / EN 60825 Red 650 nm, laser protection class 2, power ≤ 1 mW Beam diameter < 11 mm at 10 m distance Beam diameter < 35 mm at 50 m distance Beam diameter < 65 mm at 100 m distance Laser divergence 0.6 mrad Operating temperature -10°C ... +50°C Storage temperature -20°C ... +70°C applications: RobFlow is a modular system, the range of functions of the standard package can be extended by additional Kdodpsfz Dhtofx Aadsw Plugins for special tasks as well as customer-specific extensions can be added. With the help of the available functions, the following applications can be implemented, for example: Infotainment tests: Optical and haptic tests Single actuations and path movements straight, meandering, curve segments Analysis and evaluation functions Steering column tests: Haptic tests along complex paths Wide measuring range due to multiple calibrated Force/torque sensor Easy to [...]

Condition: excellent (used), Handle UVALOC 400 Loctite 97039 Curing Chamber The UVALOC 400 curing chamber (LOCTITE 97039) is a surface jet curing system, developed for curing light-curing adhesives with UVA rays and visible light. It is suitable for manual curing of individual parts during the production process as well as for laboratories. The following is integrated in the device a control unit with integrated mains switch and operating hours counter Kjdpfxotv H A Tj Aadodw a lamp housing with the burner reflector ignitor. In with UV protection box Features: Contains 400 W metal halide lamps Optimized for light emission in the UVA range Typical curing area 10 x 19 cm Expected service life of the UV lamp up to 1000 h The power supply unit can be detached from the lamp module and operated separately Adjustable lamp height for optimum irradiation With glass filter to avoid short-wave UVB/UVC emission Technical data: Mains connection 230 V AC ± 4%, 50 Hz Power consumption approx. 460 W Mains fuse 2 x 5 A, slow-blow Glass tube miniature fuse 5 x 20 mm Warm-up time of the UV lamp 3 minutes Lamp type 400 W high-pressure metal vapor lamp with base on both sides Lamp life approx. 1000 hours Intensity See section 5.1 Dimensions (width x height x depth): 220 mm 472 mm 300mm Ambient and operating temperature + 10 °C ... + 30 °C Storage temperature - 10 °C ... + 60 °C Weight ~ 11.5 kg Condition: gebraucht / used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a Bosch swivel arm robot SCARA SR8 with control unit. Bosch swivel arm robot SCARA SR8 Control unit Type: SCARA SR8 Condition: pre-owned / used Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) Kdjdedyaibjpfx Aadsw We can answer questions on the phone for you. Written order possible by email or fax

Condition: good (used), Here we offer robots a Stäubli. Stäubli robots with control unit and Control Panel The Staubli RX130 is a fast and accurate means of payload robot (12 kg) that a max range of 1360 mm has arm. It is suitable for machine operation, painting, clean room, life sciences and Pharma. The RX130 is equipped with the CS7 controller and has an articulated arm with 6 degrees of freedom robot for maximum flexibility. The spherical working range of the robot allows optimized use of the robotic cell. It can be installed either on the floor or ceiling. The 6-axes RX130 offers a high resolution of servo with absolute calibration and a completely closed structure, ideal for applications in harsh environments. 3X400V-50/60Hz-5500VA Kdjdod Dy H Topfx Aadjw Weight 260kg Type: Stäubli CS7 RX130 Condition: pre-owned / used Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you. Written order possible by email or fax

Condition: excellent (used), Here we offer 1800 a Labinot tempering system TS. Labinot tempering system TS 1800 400V of 3n,50hz, 3 x 35 AT Weight: approx. 920kg Kdsded Huqhepfx Aadsw Type: TS 1800 Condition: pre-owned / used Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you.

Condition: not inspected (used), Bosch Rexroth Type: SCARA SR6 control panel defective Bosch Rexroth swivel arm robot turbo SCARA SR6 with control unit Nominal load 2 kg Maximum load (sleeve ∅ 20 mm) 5 kg Maximum load (sleeve ∅ 25 mm) 8 kg Rated maximum mass moment of inertia (axis 4) 500 kgcm² Kedpevx Taiefx Aadsdw Max. mass moment of inertia (axis 4) 1000 kgcm² Horizontal force, continuous/max. 60/150 N Vertical force, continuous/max. 200/300 N Torque (axis 4), nominal/max. 5/10 Nm Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Autotherm Type: Temperature control unit Autotherm AW 95-12/VK/E Temperature control unit Autotherm AW95-12_VK for water / glycol temperature control (refurbished) Autotherm AW temperature control unit: For high-precision temperature control of water Temperature control units from autotherm are used in various areas of industry, research and laboratory applications. Temperature control units supply, for example, tools, open baths, double-walled containers, heat exchangers and heating chambers with tempered water, to keep them at the desired temperature with high precision. Areas of application: Kodpjuigrzofx Aadjdw Mechanical engineering, e.g. solar and wind power industry, textile industry Plastics processing Chemicals and pharmaceuticals paper production medical technology Food industry Research and development Temperature control unit Autotherm AKW AW95-12/VK Temperature range RT°C / +95°C Heating capacity 12.0 KW Cooling capacity 18.0 KW Passive cooling system via heat exchanger / connection to cooling water network required Nominal output 14.5 KW Dimensions 600mm x 840 mm x 910mm Power consumption: 400Volt/ 50 Hz 13400 Watt 19,6 A 5,1 bar Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Adept control unit model 310 with control panel. Kjdpjbb H Auefx Aadodw The control unit is supplied together with the control panel, cables and software package.

Condition: excellent (used), Stäubli robot RX 60B LCR with control unit and manual control unit Here we offer a Stäubli robot RX 60B with control unit. Robot: Stäubli robot RX 60B LCR Lifting weight (nominal batch - kg) 2,5 kg Weight 46 kg Type: RX60B LCR / F04/50R7E1/A/01 Control unit: Stäubli CS8 RX60B LCR 3X400V-50/60 Hz-3000VA Weight 170 kg Type: CS8 RX60BLCR / F06/546XA1/C/01 Manual control unit: Stäubli SP1 condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Kdedpfx Ajft Sc Ieadjw We can answer further questions for you on the phone.

Condition: good (used), Vötsch Model: VCS 7130-15 Vötsch Climate Test Chamber, Water-Cooled Temperature Test Data: Temperature range: -70°C to 180°C Temporal temperature deviation at center of workspace: ±0.3 to ±0.8 K Spatial temperature deviation: ±0.5 to ±2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 16 K/min Cooling: 14.5 K/min Climate Test Data: Temperature range: +10°C to +95°C Humidity range: 10 to 98% RH Temporal temperature deviation at center of workspace: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1 K Temperature gradient: 1 to 2 K Temporal humidity fluctuation at center of workspace: ±1 to ±3% RH Maximum heat compensation: 8000 W Enclosure dimensions: External dimensions with hinges and door lock: Height: 1995 mm, Width: 1680 mm, Depth: 1855 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1300 mm, Depth: 1855 mm Internal dimensions: Height: 950 mm, Width: 1100 mm, Depth: 950 mm Test chamber volume: approx. 1300 liters Feedthroughs: The test chamber is equipped with feedthroughs on both the right and left sides. These allow for test leads and testing devices to be routed into the chamber. 1 x R1 NW 125 mm 1 x R1 NW 140 mm 1 x L1 NW 50 mm Test chamber illumination: Halogen bulb 24V, 50W Power supply: 3/N/PE AC 400V ±10% 50Hz Rated power: 44.0 kW Rated current: 63.0 A Customer-provided fuse: 100 A slow-blow Maximum heat output to the environment: 2.2 kW Permissible test item weight: Total load on shelf supports: 100 kg Test chamber floor: 150 kg, Removable shelf: 50 kg Refrigerants: R 404A/R 23 Weight: 1900 kg For your security as a buyer, please note: The following steps are carried out in advance on our chambers offered for sale: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Kodpswvgwbjfx Aadsdw Scope of delivery: (see photo) (Subject to changes and errors in the technical data and specifications!) We are happy to answer any further questions by phone.

Condition: good (used), Stäubli Type: RX60 L Stäubli robot RX 60 L with control and hand control unit Control unit RX60 Lifting weight (charge nominal kg) 1.5 kg suitable for assembly cell robot cell! Total weight 44 kg Condition: used Kdedpfxjcgfgqj Aadsw Scope of delivery: (see picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Wittmann Temperature Control Unit Here we offer you a Wittmann temperature control unit. Wittmann Temperature Control Unit DISCO 2 Singulus 3X415V 50/60Hz 16A 5kW Type: TR7B7D7D0X_09_00 Condition: used / used Scope of delivery: (See picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you. Kdjdpfx Aelkbapeadow

Condition: new, IPETRONIK interior simulation box Here we offer you an IPETRONIK indoor simulation box. Technical data and description of the equipment: IPETRONIK interior simulation box ( new and unused ). The interior simulation box is intended to simulate the passenger compartment for tests in recirculation mode. It has a variable interior space from 1,8 to 4m³. The exhaust air volume flow from the front evaporator or the air conditioning unit is fed into the interior in a controlled manner. Only rear evaporators installed in the passenger compartment are tested with the interior simulation box. The insulation chamber is mounted on an aluminum profile frame with rollers. Kdsdolypy Eepfx Aadsw A light is installed in the chamber. The box is protected against overtemperature by a safety thermostat (Esti). If the permissible temperature is exceeded, a glass cartridge in the ESTI is destroyed. The installation is stopped. (TRIGGER TEMPERATURE: 80°C) Technical data of the isolation chamber: Dimensions: Outside: width 1.860 mm depth 2.360 mm height 1.360 mm Inside: Width 1.700 mm Depth 2.200 mm Height 1.200 mm Insulation: 80 mm polyurethane rigid foam, foamed CFC-free, U-value 0.27 W/m2K, building material class B1 according to DIN 4102. Technical data and description of the system: Connection: Tongue and groove system with foamed-in eccentric closing hooks. Surfaces: Both sides: 0.8 mm stainless steel sheet 1.4301, ground, grain 320 Bottom finish: 2.0 mm stainless steel sheet 1.4301, SM rhombus, anti-slip, bottom beveled 90 ° all around (approx. 15 mm), bottom plate flush with wall plate, Pressure distribution plate made of laminated wood, 1,500 N/rubber wheel loadable (contact area > 4 cm2), 30,000 N/m2 surface load, floor joints completely welded, welded-in stainless steel pipe as floor drain, led out through the floor to the bottom Chamber door: Hatch door, 1-leaf, 800 x 1200 mm i.l., DIN left, heated door frame (230 V), heating bands silicone-free, 4-sided sealing profile made of EPDM, pess lever lock, lockable, emergency release, heated viewing window, 500 x 500 mm, triple glazed, surface heating (230 V), frame heating (230 V), heating controlled on site, silicone-free lipping Movable wall: 1680 x 1180 mm, 80 mm rigid polyurethane foam, 0.8 mm stainless steel sheet 1.4301 on both sides, ground, grit 320, with protective foil, closed on both sides with sheet metal (The rear wall is manually infinitely adjustable for volume change). Recirculation system: For temperature control, a heat exchanger (Systemair) is mounted in the recirculation section for indirect temperature control. The air is conveyed by a radial tube fan (Cosmo), heating is provided by an electric heater integrated in the brine circuit, electric heater (Türk and Hillinger) integrated into the brine circuit. The heaters are continuously monitored by temperature monitors and limiters (Türk and Hillinger, Johnsson Controls). Cooling is provided by a secondary brine circuit with pumps (KSB) and 3-way valve (Belimo). Installed electrical heating capacity 1 * 6kW. The mixing ratio is 50% water / 50% ethylene glycol. Feeding from station: =TME2++AS-QF21 Operating voltage: 400V Power: 17kW Rated current: 33A Back-up fuse: 35A Control voltage: 24V DC /24V AC /230V AC PLC - System: S7 300 Type: IPETRONIK indoor simulation box Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), RS-Simulators Kedjwwg Uvopfx Aadedw Type: KKM 110/45 Manufacturer: RS-Simulators, water-cooled Climatic chamber – Available from September/October!! Climatic chamber 110m³ including condenser The KKM 110/45 model belongs to the TKM/KKM modular construction line from RS-Simulators – a modular climatic chamber that is assembled on site. This design offers: Modularity: Individual segments are pre-assembled and set up at the customer’s location. This allows for easy retrofitting (increased depth or additional modules) and hassle-free relocation at a later date. Technical data – Climatic chamber: Manufacturer: RS-Simulatoren Prüf- und Messtechnik GmbH Type: KKM 110/45 External dimensions: 6200 x 9400 x 3400 mm (W x D x H, including technical attachments) Internal dimensions: 5900 x 7000 x 2960 mm (W x D x H) Chamber door (double-leaf): 3600 x 2930 mm (W x H) Personnel door (single-leaf) on side wall: 1880 x 900 mm (H x W) Feedthroughs: 8 x Ø120mm (4x left & 4x right) Windows: 1x (460 x 550mm) in the front chamber door, heated 1x (1260 x 1000mm) in the left side wall, heated Temperature range: -40°C to +120°C Temporal deviation: ± 0.8K – 1.5K according to DIN 50011 (empty test chamber) Humidity range: 10% to 95% Humidity tolerance: +/- 5.0% Refrigerants: 2x R404A 52kg, 2x R23 17kg Temperature change rate: Heating: 1.0 K/min Cooling: 1.0 K/min Electrical specifications: Voltage: 3x400V/N/PE Current: 340A Weight: approx. 2,000 kg Important information for your safety as a buyer! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. Following successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Subject to technical changes and errors in the information provided!) We are happy to answer any further questions by phone.

Condition: excellent (used), Stäubli Industrial Robot TX60 with CS8C-TX60 Controller – 6-Axis Robotic Arm For sale is a pre-owned Stäubli TX60 industrial robot, including the CS8C-TX60 control unit. The robot is ideally suited for precise handling, assembly, or inspection tasks in automation technology. Technical Data – Robotic Arm TX60 Axes: 6 Max. load capacity: 4.5 kg (up to 9 kg possible) Reach: 670 mm Repeatability: ± 0.02 mm Mounting: Floor, wall, or ceiling Kedew El Hmepfx Aadedw Protection rating: IP65 (optional IP67 at wrist) Robot weight: approx. 51.4 kg CS8C-TX60 Controller Power supply: 1X230V-50/60Hz, 1700 VA, 120 kA Compact 19" controller with VAL3 control system Communication via Ethernet / RS232 / fieldbus (optional) Digital inputs/outputs and expansion options Protection rating: IP20 (optional IP54) Dimensions: approx. 331 × 445 × 455 mm Controller weight: 31 kg Scope of Delivery Stäubli TX60 robotic arm CS8C-TX60 controller Connection cables (robot–controller) Teach pendant, handheld programming device Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and details!) We are happy to answer any further questions by phone.