Used Control Cabinet for sale (45,175)

Year of construction: 2010, condition: excellent (used), Schaltschrank mit Glastür und Kühlgerär auf Rollen 600 x 800 x 2.000 mm Bcjdpfx Ageiluykj Nsw

Condition: new, ! We are happy to advise you! Here we offer: Rittal control cabinets AX1076.000 Bodpfx Agsrlmv Es Nscw Dimensions = 600x760x210mm

Condition: like new (used), Year of construction: 2003, functionality: fully functional, overall weight: 80 kg, total height: 2,000 mm, total width: 600 mm, type of input current: three-phase, input voltage: 400 V, control cabinet height: 1,900 mm, input current: 100 A, 1x Siemens Sikus 630 Power Distribution Cabinet Sub-distribution Panel Switch Cabinet Power Distributor Floor Distributor Dimensions: 200x85x22.5 cm incl. plinth Cabinet height without plinth: 190 cm + 10 cm plinth = total height Industrial quality, enclosure made of sheet steel, color 7035 light grey Fully wired with main switch, surge protection, fuses, relays, and outgoing terminals. The distribution panels were in operation until recently and underwent annual inspection. Wiring diagram is included. 10 units available. Year of manufacture: 2003 For further data, please refer to the pictures. Very good condition – almost like new, see photos Bcedpfxeynwx Se Ag Njw Collection by appointment only in 75053 Gondelsheim A forklift is available for loading Shipping by freight forwarder possible, please inquire with ZIP code

Condition: like new (used), Year of construction: 2003, functionality: fully functional, overall weight: 80 kg, total height: 2,000 mm, total width: 600 mm, type of input current: three-phase, input voltage: 400 V, control cabinet height: 1,900 mm, input current: 100 A, 1x Siemens Sikus 630 Power Distribution Panel, Sub-Distribution Board, Control Cabinet, Distribution Box, Floor Distribution Cabinet Dimensions: 200x60x22.5 cm including distribution base Cabinet height without base: 190 cm + 10 cm base = total height Industrial quality, housing made from sheet steel, color RAL 7035 light grey Fully wired with main switch, surge protection, fuses, relays, and outgoing terminals. The distributors were in use until recently and had annual inspections. A wiring diagram is included. Bedpfjynwxxsx Ag Necw A total of 10 units available. Year of manufacture: 2003 For further data, please refer to the images. Very good condition – almost like new, see pictures. Collection only by appointment in 75053 Gondelsheim. Forklift available for loading Shipping by freight carrier possible, please inquire with your postal code.

Condition: used, Used control cabinet from a Weinig Unicontrol 10, suitable as a spare parts donor or for building a new control cabinet. Bcjdpfx Aerrk I Hog Nsw Contents include, among others: - Siemens Simatic S5 - Siemens EMG 45

Condition: used, Dimensions: 100 x 40 x 220 cm Bsdjl Nafhspfx Ag Njcw Used control cabinet from a Venjakob drying channel, offered as a spare parts donor or for building a new control cabinet.

Condition: used, Used Weinig control cabinet type Univar 10, suitable as a spare parts donor or for building a new control cabinet. Includes, among others: • EMC PA10A513 • Interbus • Moeller PKZM • Schaffner FN351-25-33 Bcjdjlkcfdepfx Ag Nsw • Lenze EVF8216-E • Setzermann SS6E3/5 • Siemens 3TD43 Individual components available on request.

Condition: used, Length x width x height: 1,000 x 800 x 1,810 mm Bjdpfjlf Iz Hjx Ag Nocw - lockable.

Year of construction: 2013, condition: excellent (used), functionality: fully functional, machine/vehicle number: M284 2013.5.2, For sale is a Steinhauer eCAB WorkCenter CNC machining center, year of manufacture 2014, in very well-maintained and fully functional condition. The last service was performed on 13.08.2024. The machine is immediately ready for operation. The eCAB WorkCenter was specifically developed for professional switch cabinet construction and is ideally suited for automated processing of mounting plates, doors, side panels, and other enclosure components. It enables precise drilling, milling, and thread cutting of components made from steel, stainless steel, aluminum, and plastic. CAD-assisted processing is carried out via a CNC controller with high repeat accuracy – ideal for both single-part and series production. Technical Highlights: - CNC machining center specifically for switch cabinet manufacturing Bjdpfeymw Haox Ag Njcw - Automated machining of mounting plates, doors, and enclosure components - Suitable for steel, stainless steel, aluminum, and plastic - High precision and repeat accuracy - User-friendly CNC control / software Machine Data: Manufacturer: Steinhauer Model: eCAB WorkCenter Year of manufacture: 2014 Last service: 13.08.2024 Condition & Service: - Very well maintained, fully functional - No known technical defects - Inspection and test run possible by appointment Scope of Delivery: - eCAB WorkCenter including control system - Accessories / tool holder - Documentation / computer including software

Condition: excellent (used), Control cabinet, distribution cabinet, switch cabinet, baying cabinet, server cabinet, electrical cabinet -Control cabinet: Electrical cabinet, server cabinet, unused -Type: 1-winged -Door: lockable -Overall dimensions: WDH 800/850/2190 mm -Weight 211 kg Bcsdpfx Aoygh E Hjg Nsw

Condition: new, Siemens SPPA - T2000 Automation Cabinet Control System and Cabinet Design SPPA - T2000 AS 620B R903 Siemens 8 MF Cabinet SPPA FUM R Standard Cabinet 6DP2623-1GG10-0XX0-Z Siemens SPPA - T2000 8 MF Cabinet AS 620 B R903 6DP2623-1GG10-0XX0-Z B15+Y88 Y88=A5E03444617 B15: with cross bracing Seismic reinforcement kit front and rear Double doors 2 partition walls Lifting eyes Cabinet indicator lamp Height × Width × Depth: 2200 × 900 × 400 mm Degree of protection IEC 60529: IP20 Protected against solid foreign objects (diameter ≥ 12 mm) No water protection Central unit subrack: 1 x red. AP FUM-B-BGT: 3 x EU 903 subrack with 2 x IM616 Profibus connection and control system monitoring with 1 x Fum210 Sys 36 fuse slots Color: RAL 7032 Module designation Fum210/6DP1210-8BC Teleperm XP binary module Profibus connection interface module IM616 6DP1616-8BA Financing through our bank is also possible. Bsdpfx Astzbdksg Njcw komplett-konzept.leasingo.de Other items in other sizes – new and used – can be found in our shop! International shipping costs upon request!

Condition: new, Areva Teleperm XS Control Cabinet Standard Construction For the construction of Teleperm XS systems, SC 9422 control cabinets (2200 x 900 x 400 mm deep), IP30 protection class, are typically used. The cabinet is equipped with cable clamps with shielding bars. The cabinet is designed for seismic loads. Cable entry and power supply are generally from below. Bodpfx Astzaxmeg Nscw In the standard cabinet, the subracks are mounted in the middle section. To the left and right of these are areas for mounting cabinet connection elements and transceivers. Terminal blocks are used to connect peripheral cables. Other connection technologies, such as Maxi-Termi-Point, are also possible. Field cables must be shielded with twisted pairs. Buses are implemented using conventional cables within a cabinet and fiber optic cables outside the cabinet. Teleperm XS is suitable for systems with both surface grounding and central grounding (CEP). Subracks Various subrack configurations are used depending on the application. The basic version of the subrack has a continuous backplane bus and offers 21 slots. If large signal volumes need to be recorded, expansion subracks can be connected. Variants are also supported: - Split racks with two smaller, independent computers (10 slots each, each with its own fans and power supply) - Mixed configurations such as the compact combination of a computer with the associated signal conditioning modules SC 9422 Control Cabinet with cross bracing Double doors Cabinet indicator light Height × Width × Depth: 2200 × 900 × 400 mm Protection class: IP30 Power consumption: typical 550 W, max 1280 W Weight: 300 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Other items in other sizes – new and used – can be found in our shop! International shipping costs upon request!

Year of construction: 2005, condition: good (used), several used, functional switch cabinets. The mentioned sales price is valid plus 19 % VAT, ex yard. Bcsdpfxjgytz Us Ag Njw

Condition: used, Control cabinet, distribution cabinet, control cabinet TS modular cabinet, profile door -Side walls pair Bjded Sm U Uepfx Ag Nscw -Price: complete -Dimensions each: 1395/460/H15 mm -Total weight: 16 kg

Condition: good (used), Year of construction: 2012, Control cabinet - cooling unit, control cabinet air conditioning unit, distribution cabinet, heat exchanger spindle cooler -Manufacturer: Harbor, heat exchanger spindle cooler from CNC machining center Santenberg GTC S 2 -Type: HPW-10AR Bodpfx Agsi Sdf Uo Nocw -Voltage: 110V 50/60Hz -Dimensions: 250/75/H580 mm -Weight: 5.7 kg

Condition: good (used), Control cabinet - cooling unit, control cabinet air conditioning unit, distribution cabinet, heat exchanger, wall-mounted cooling unit, control cabinet cooler -Manufacturer: bader, control cabinet - cooling unit -Type: W 25/8 A -Voltage: 230V -Power consumption: 0.120 kW -Number: 1x cooling device available -Price: per piece Bedeprb Dgopfx Ag Njcw -Dimensions: 300/80/H750 mm -Weight: 11.0 kg/piece

Condition: excellent (used), Switch cabinet, distribution cabinet, switch cabinet TS, baying cabinet, server cabinet, system cabinet, baying system, baying cabinet system, system single cabinet -Manufacturer: Rittal, compact enclosure AX with fan and connection plug -Type: AX 1338.000 -Fan: Type SK 3237.100 Bsdpoxpdtwofx Ag Nscw -Plug: see photos -Number: 4x control cabinet available -Price: per piece -Dimensions: W x H x D 380/350/600 mm (without plug) -Weight 20 kg/piece

Condition: good (used), Control container, control cabinet -Control cabinet for tunnel boring -comes from the company Lemme Berlin -for bentonite pumps -Control panel -PLC control -Dimensions: 600/350/H1320 mm Bcjdpfx Ajb A Su Deg Now -Weight: 60 kg

Condition: used, Control cabinet - cooling device, control cabinet air conditioner, distribution cabinet, heat exchanger, wall-mounted cooling device, control cabinet cooler -Manufacturer: Siemens, heat exchanger control cabinet cooling device from milling machine MAHO MH 800C Bedsq T T Nzepfx Ag Nscw -Type: 8ME 7874-DR -Voltage: 230V -Power consumption: 170W -Dimensions: 415/130/H725 mm -Weight: 14.2 kg

Condition: good (used), Year of construction: 2000, Switch cabinet cooling unit, switch cabinet air conditioner, distribution cabinet, heat exchanger, wall-mounted cooling unit, switch cabinet cooler -Manufacturer: Siemens, control cabinet cooling unit from CNC milling machine MAHO MH 800C Bcsdowcb Dpopfx Ag Now -Type: K1000 -Voltage: 230V -Power consumption: 700 W -Dimensions: 155/1100/H455 mm -Weight: 48 kg

Condition: good (used), Year of construction: 2006, Control cabinet - cooling unit, control cabinet air conditioning unit, distribution cabinet, heat exchanger, control cabinet cooler -Switch cabinet cooling unit: from vertical lathe Scherer VDZ 80 DS -Type: K0154009 SK23 259603 -Dimensions: 950/215/H400 mm Bcodpfovw Rzujx Ag Nsw -Weight: 40 kg

Condition: good (used), Control cabinet, distribution cabinet, TS control cabinet, modular cabinet, server cabinet, system cabinet, modular system, modular cabinet system, single system cabinet -Manufacturer: Rittal, System single cabinet, unused -Type: X 2-door -Dimensions: 1200/520/H2000 mm Bjdpfx Agjpg N Spo Njcw -Weight: 166 kg with pallet

Condition: good (used), Year of construction: 2020, Switch cabinet cooling unit, switch cabinet air conditioner, distribution cabinet, heat exchanger, wall-mounted cooling unit, switch cabinet cooler -Manufacturer: Rittal, wall-mounted cooling unit Blue e -Type: SK 3185.830 -Cooling capacity: 1.6 kW -Dimensions: 400/320/H950 mm -Weight: 38 kg Bedpfx Agsxm Sxce Nscw

Year of construction: 1991, condition: good (used), Switch cabinet Engel, year of manufacture 1991 Bedpfx Agox A Iqae Nscw

Condition: good (used), Year of construction: 2020, Control cabinet cooling unit, control cabinet air conditioner, distribution cabinet, heat exchanger, wall-mounted cooling unit, control cabinet cooler -Manufacturer: Rittal, wall-mounted cooling unit Blue e -Type: SK 3187930 -Cooling capacity: 2.6 kW -Number: 2x cooling unit available -Price: per piece -Dimensions: 450/250/H1600 mm Bcjdpfxox Nfkts Ag Njw -Weight: 56 kg/pc.