Used Conveyor Dryer for sale (11,439)

Year of construction: 2002, condition: used, machine/vehicle number: 5713, - Manufacturer: Elmag Superfici - Type: TT1-30 - With cross carriage wheels - Length: 3,000 mm - Working width: 1,350 mm - Total width: 1,660 mm - Working height: 900 + - 20 mm - Height adjustable - Location, in stock - Volts, Hz 400 / 50 Hnjdpsx Url Ujfx Adwjg - Motor power 0.75 kW

Year of construction: 1999, condition: used, length 12,5 mm width 600 mm Hnedpfx Aspxrkgedwog height over floor . mm Engine overhauled, 5 new rollers

Year of construction: 2009, condition: used, Conveyors Hnodpfx Adjxltd Djwog Müller Martini 3520 Year: 2009 Description: - Conveyor (180°)

Year of construction: 2020, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 20526 Specifications: Hsdpoxu A Dfofx Adwjng Model: AD500 Year of Manufacture: 2020 Voltage: 400V Maximum Working Pressure: 14 bar Weight: 165 kg Condition: In good working order Delivery Status: Ready for delivery Description:Pneumatech AD500 refrigerated air dryer, manufactured in 2020. The unit is in good working condition. Ready for immediate delivery and use. Total Weight: 165

Condition: good (used), Powered roller conveyor, L 2450 mm, W 620 mm, NORD gear motor, data according to the nameplate. To operate the roller conveyor, a control unit must be installed, preferably with a frequency inverter for speed regulation. The roller conveyors were set up on the floor. See the attached photo with the leveling plate. Price per unit. 24 units available. Hnsdpfxjx Tfrxj Adwsg

Condition: excellent (used), Chip conveyor from the manufacturer MAYFRAN, model 40.6GS-HR/SP20, conveyor belt length 4200 mm, in very good technical and optical condition, labeling of the control buttons can be relabeled in German or English on request. Hsdswk Igajpfx Adwong

Condition: used, Year of construction: 2008, - Manufacturer Efsen/Cefla - Type Woodcure 1400 Hodpfovupdcsx Adwsng - Year of manufacture UV 2008, transport/conveyor 1998 - Working width 1,300 mm (1,445) mm - Working height 870 + - 20 mm - Max. part height 70 mm - Number of tubes from above 2 pcs. - Straight tubes 2 pcs. - Tube power 120 W/cm - Suitable for mercury tubes - Suitable for gallium tubes - Manufacturer of transport system Cefla - With cross bar conveyor - Bar spacing 95 mm - Feed adjustable via hand wheel ~ 5-25 m/min - Installation length: 3,500 mm - Width: approx. 2,100 mm - Volts, Hz 400 /50 - Total electrical connection 38 kW - Voltage fluctuations max. +/- 5%

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 1,370 mm, total width: 1,370 mm, total height: 1,020 mm, overall weight: 360 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.9 kW (2.58 HP), power: 1.9 kW (2.58 HP), workpiece width (max.): 240 mm, workpiece length (max.): 240 mm, ZDV Series - Circular Type Dryers For drying after deburring and polishing Corn granule is used. Various volumes in the range of 125lt - 1650lt Includes seperating system- Resistance heated Drying for all kinds of metal and non-metal materials Suitable for automation system Optional accessories Dryer machines are used to dry the wet surfaces of the parts after the process in surface finishing machines where deburring, polishing, etc. are performed. At the same time, dryer machines help to prevent corrosion of the parts Corn cobs are used in dryer machines. Hot corn cobs absorb water from the surface of the parts during process. The dryer machines have a heating system with resistance. By the help of heating system, the drying speed increases and it saves time and energy. On the machine, there is a material loading point in order to transfer wet parts to the machine easily and a discharge slider which can take out the parts after drying easily. During drying process, the parts and corn cobs move through the ramp in the bowl to the self-discharge way. Activating the slider is enough to take out the dried parts. Thanks to ergonomically designedchassis height and springs, staff can work with high efficiency. Increased resistance against vibrations, rigid and reinforced support construction; adjustable insulators flexibly mounted to absorb vibrations are some of the distinctive design features of the machine chassis. Electrical panels with CE Certificate designed in accordance with EU standards are used. There are main switch and emergency stop switch. The working time controller and time clock are included in the standard equipment. Three-phase electrical connection is used. It can work integrated with automation systems with PLC software. Dust absorbing system is available as an option. Hnsdpfxjl Sm N Tj Adwsg The dimensions of the dryer machines are designed to work integrated with the previous processes surface finishing machines. Therefore, the products from the first process are able to be transferred to the material loading point of the dryer automatically.

Condition: excellent (used), Year of construction: 2008, volume flow: 3,096 m³/h, pressure: 29 bar, overall weight: 560 kg, Equipment: type plate available, PROD. - ATLAS COPCO TYPE - FD860 Hnsdorivrpjpfx Adwsg S/N - APF135144 YEAR - 2008 POWER (kW) - 8.3 PUMP. (m3/min) - 35 CIS (bar) - 29

Condition: excellent (used), Year of construction: 2016, operating hours: 23,511 h, functionality: fully functional, Water-cooled dryer Atlas Copco FD510 30.60 m³/min Year of manufacture: 2016 Hsdpjx Sx U Dofx Adwong

Operating hours: 9,999 h, condition: good (used), functionality: fully functional, Used continuous belt brazing furnace Manufacturer: WMU System • System designation: y-WMU • Type of system: o Continuous belt furnace o Protective gas atmosphere H₂ / N₂ • System manufacturer: WMU GmbH Temperature data • Number of control zones: 4 • Max. temperature at part: 900 °C • Min. temperature at part: 880 °C Setpoint temperatures per zone: • Zone 1: 970 °C Hnsdpfx Ajx Tb Rdodwsg • Zone 2: 970 °C • Zone 3: 980 °C • Zone 4: 980 °C Process parameters • Belt speed: o 480 mm/min o corresponds to 530 mm/min at full belt load • Gas flow rates: o Nitrogen (N₂): 20 m³/h o Hydrogen (H₂): 14 m³/h

Condition: new, Electric dehumidifier/construction dryer for commercial use. For drying rooms, dehumidifying cellars, etc. and for drying e.g. concrete, masonry, plaster, screed. Refrigeration unit with rotary piston compressor and capacitor motor 230 V, 50 Hz, 900 W, with electronic defrosting, for continuous operation. Very quiet operation. Dehumidification capacity max. 50 l/24 h, air volume max. 265 m3/h. Electronic control unit with illuminated large control panel and memory function. Electronic hygrostat. Air filter. Internal 7.7 l condensate container. In sturdy plastic housing with castors. In cardboard box. Hnsdpfx Adetty Raowog Dehumidification capacity: ≤ 50 l/24 h Air volume: ≤ 265 m³/h

Condition: used, - Manufacturer: Hackemack Hedpfxoxz Hb Ue Adweng - Working width: 1300 mm - Roller diameter: 65 mm - Roller pitch: 100 mm - All rollers with rubber surface - Infinitely variable feed via handwheel - Feed speed approx. 2 - 8 m/min - Length: 1,900 mm + folding table 600 mm, 2,500 mm - Voltage, Hz: 400 V / 50 Hz - Location: In stock, D-32825 Blomberg

Condition: used, Year of construction: 2016, operating hours: 7,635 h, Serial number: CB00xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20363 Specifications: - 2016 model - 7635 Hours - 67600 kg - Good with crushing plates again - Side conveyor - Rubber in feeder - Central lubrication - Volvo engine - 315 kW - Magnet - Feed box - New batteries - Ready for delivery Description: We have a 2016 Sandvik UJ440i crusher w/ side conveyor and magnet for sale. Maintenance and services have been taken continuously. Everything works as it should according to the owner. Errors and defects may be found. Ready for delivery Hours: 7635 Own weight: 67600 Hnjdpfowi Rp Usx Adwsg Total Weight: 67600 Model: UJ440I

Condition: used, Belt Conveyor, Belt Conveyor System, MFP Conveyor Technology Machine No.: 17565 Year of Manufacture: 2018 Usable length: 3100 mm Belt width: 600 mm Belt length: approx. 6400 mm Frame profile height: 35 mm Deflection roller diameter: 20 mm Belt speed: 10 m/min to 45 m/min Conveyor height: approx. 1120 mm Motor power: 140 Watts Power supply: 230 Volt, 50 Hz - Infinitely variable belt speed via potentiometer on ROFRE frequency inverter, type 897 - Reversible operation (right/left running) - Belt drive via INTERROLL drum motor - Stable sheet steel construction with closed steel plate under the conveyor belt - 1 piece height adjustable subframe HAACON with hand crank, conveyor height approx. 950 to 1150 mm - HAACON subframe mounted on steel plate, length 750 mm x width 500 mm x thickness 30 mm - 1 fixed support foot without height adjustment as transport support - Fully mobile on fixed castors Overall dimensions L x W x H: 3180 x 760 x 1150 mm Hedpfx Ajwrihnodwjng Weight: 250 kg Good condition

Year of construction: 2025, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Hnsdsmt Dcfspfx Adwog Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 2800 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 420 x 700 x 690 mm Weight 37 kg Type and amount of refrigerant R134a, 550 g

Condition: new, Electric dehumidifier/construction dryer for commercial use. For drying rooms, dehumidifying cellars, etc. and for drying e.g. concrete, masonry, plaster, screed. Refrigeration unit with rotary piston compressor and capacitor motor 230 V, 50 Hz, 1200 W, with automatic hot gas defrosting system, for continuous operation. Very quiet operation. Dehumidification capacity max. 80 l/24 h, air volume max. 850 m3/h. Electronic control unit with illuminated 3"" display and memory function. Electronic hygrostat, operating hours counter, power consumption counter. Air filter. In a sturdy sheet steel housing on a mobile tubular steel frame with large wheels. In cardboard box. Hedpfx Adsuy Thmswsng Condensate container not included (see accessories below!) Dehumidification capacity: ≤ 80l/24h Air volume: ≤ 850 m³/h Super offer: When you buy a REMS Secco 80 set, you will receive 1 REMS Detect W humidity measuring device free of charge. You save an additional 233.55 euros. The offer is valid until 31.12.2024

Condition: used, Year of construction: 2018, machine/vehicle number: 318113001, The pictures show the machine in its unrefurbished condition. The offer price refers to a partially refurbished, fully functional machine. - Manufacturer: Cefla - Model: UV-R3 - Year of manufacture: 2018 - Working width: 1300 mm - Part height: approx. 3 - 70 mm - Number of top lamps: 3 pcs. - With rod conveyor - Rod spacing: 60 mm Hodpfx Adjx Tpx Ajwjng - Suitable for mercury lamps - Suitable for gallium lamps - Lamp power: max. 120 W/cm - Connected load: 56 kW / 104 A - Voltage, Hz: 400 / 50 - Control cabinet integrated under the machine - Feed rate adjustable: approx. 1.25 - 21.25 m/min - Length: approx. 3,500 mm - Width: approx. 2,700 mm - Height: approx. 1,600 mm - Location: in stock - Voltage, Hz: 400 / 50

Condition: new, Year of construction: 2025, Complete Compressed Air Set: LUFT 1000 INVERTER Screw Compressor + 500L Vertical Air Receiver + IZBERG N10S Air Dryer This professional compressed air set includes: The LUFT 1000 INVERTER screw compressor (7.5 kW, direct drive, with frequency inverter), A 500-liter vertical air receiver with fittings, The IZBERG N10S refrigerated air dryer. This system is designed for industrial facilities, workshops, and all pneumatic applications that require reliable, efficient, and energy-saving compressed air solutions. The LUFT series by the Polish brand CORMAK represents the latest in pneumatic technology, combining innovation with high-quality materials and components. Low operating costs, user-friendly design, robust construction, and high performance ensure efficient and trouble-free operation even in demanding conditions. LUFT 1000 INVERTER Screw Compressor – Technical Specifications: Motor Power 7.5 kW Voltage 400V / 50Hz Output at 0–6 bar 990 L/min Output at 6 bar 950 L/min Output at 8 bar 950 L/min Output at 10 bar 930 L/min Outlet Connection (G) 1/2" Hnedpfxsxa Ah Ue Adweg Dimensions (L x W x H) 810 x 610 x 850 mm Weight 160 kg IZBERG N10S Refrigerated Air Dryer – Technical Specifications: Parameter Value Inlet/Outlet Pipe Diameter (BSP) 1" Max Operating Pressure 10 bar Max Inlet Air Temperature ≤ 38°C Dew Point Temperature 3°C Flow Capacity 1500 L/min Power Consumption 0.58 kW Power Supply Voltage 230V Dimensions (L x W x H) 380 x 600 x 625 mm Weight 31 kg Refrigerant Type & Quantity R134a, 400 g 500L Vertical Air Receiver – Technical Specifications: Parameter Value Tank Capacity 500 liters Operating Pressure 11 bar Wall Thickness 4 mm Diameter Ø 600 mm Height 2098 mm Weight 145 kg Number of Connections 6 Connection Sizes 1¼", 2", ½" Dimensions (H x D) 209.8 x 60 cm

Condition: new, Year of construction: 2025, functionality: fully functional, Roller conveyor with height adjustment. Equipped with durable rollers in bearings. Machine features For feeding and collecting material worked Very reliable steel rollers in bearings Height adjustment – fits machines of any height Universal use e.g. band saws for metal Hedpfx Adsvu Rz Noweng Technical data Rollers diameter 60×360 mm Number of rollers 10 Roller conveyor length 3000 mm Roller conveyor width 450 mm Height adjustment 650–1100 mm Load capacity 900 kg Weight 50 kg

Condition: new, Year of construction: 2025, functionality: fully functional, A roller stand perfect for feeding and collecting shafts, tubes and round profiles. Technical data Working width 240 mm Height 600–990 mm Dimensions 515×515×95 mm Weight 21 kg Hedpfx Ajvu Styodwjng

Condition: new, Year of construction: 2025, A compact set including a Theor 20 and an N20S air-dryer. The newest solution applied in pneumatics, along with quality materials and components. Easy handling, solid chassis and high efficiency. Additional double filtration in the air-dryer. Set by default includes: Theor 20 screw compressor N20S air-dryer 500L Container Theor 20 Compact technical data Compressor Motor power 15 kW Air-dryer Motor power 0.69 kW Data Efficiency at 8 bar 2.6 m3/min Efficiency at 10 bar 2.2 m3/min Outlet G3/4" The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website. Hnedpfxemqlm Te Adweg

Condition: new, Year of construction: 2025, functionality: fully functional, A roller conveyor with height adjustment. Universal use among cutting machines. Machine features For feeding and collecting material worked Very reliable steel rollers in bearings Height adjustment – fits machines of any height Universal use e.g. band saws for metal Technical data Rollers diameter 60×360 mm Number of roller 4 Roller conveyor length 1000 mm Roller conveyor width 450 mm Hnjdpfxovu R Dqo Adwjg Height adjustment 650–1100 mm Load capacity 900 kg Weight 50 kg

Condition: new, Year of construction: 2025, functionality: fully functional, Roller conveyor with height adjustment. Equipped with durable steel rollers in bearings and with a gauge for measuring cutting length. Machine features For feeding and collecting material worked Very durable steel rollers in bearings Height adjustment – fits machines of any height Universal use e.g. band saws for metal Equipped with a gauge for measuring cutting length Technical data Hnsdpevu R Agofx Adwjg Rollers diameter 60×360 mm Number of rollers 7 Roller conveyor length 2000 mm Roller conveyor width 450 mm Height adjustment 650–1100 mm Load capacity 900 kg Weight 50 kg

Condition: new, Year of construction: 2025, functionality: fully functional, PU4 - Universal 4 in 1 Worktable Feeder Universal feeder with 4 functions: stationary bracket roller bracket ball bracket V-shaped bracket for pipes. Hnjdpfxsvu R Rdj Adweg Technical parameters Stationary bracket - loading capacity 200 kg Roller in a bearing bracket - loading capacity 120 kg Ball bracket - loading capacity 120 kg V-shaped bracket for pipes - loading capacity 100 kg Dimensions 670 x 750 x 830 mm