Used Copy Shaping Machine for sale (92,418)

Condition: ready for operation (used), Technical characteristics double copying Hedpfsundhxox Abzow pneumatical tightening Power and Motors Overall dimensions

Condition: used, x-280 ,y- 200 , Z 315 , Tischabmessungen 380x380/250x500 Hsdpfx Abeddxb Nezew Sehr viele Schriftsaetze,wesentlich mehr als abgebildet

Condition: good (used), Year of construction: 1978, Machine overhauled and ready for use including accessories Hedjhzt Npopfx Abzew

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 32006, input voltage: 480 V, The Sprinter for Gears with Short Face Widths up to 100 mm The 100S Gear Shaping Machine is ideally suited for small face widths, for shaping spur and helical gears, internal and external, and for crowned and tapered gears. With only 6 m2 the 100S is one of the most compact machines of its class. Equipped with: Siemens Sinumerik 840D SL Control Hydraulic System 180 Degree Load System HSK-63 Spindle Auto Stroke Adjustment Chip Conveyor Chip Basket Flexlink Automation Festo Pneumatics Rittal Panel Conditioners Chiller 480/3/60, 35 KvA Motor & Controls Specifications: Workpiece With External Gear: -Largest Module (Steel W/Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Diameter: 100 mm Workpiece With Internal Gear: -Largest Module (Steel With Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Swing Diameter: 150 mm -Maximum Internal Diameter: 100 mm Tool: -Locating Cone In The Cutter Spindle: HSK-D63 -Diameter Shaping Spindle: 85 mm -Maximum Stroke Length: 30 mm Machine Travel Distances: -Radial (X-Axis): 180 mm -Column Tilting (B-Axis): -1 - +11 Degrees Machine Workpiece Table: -External Diameter: 220 mm -Clamping Diameter: 160 mm -Bore: 63 mm Speeds: -Feed Rate X-Axis: 12,000 mm/min -Workpiece Table (C-Axis): 0-400 min-1 -Cutter (C2-Axis): 0-300 min-1 Hsdpfxortrvyo Abzow -Spindle Stroke (A-Axis): 500-3,000 min-1 Electrical Equipment: -Operating Voltage: 480V -Supply Voltage: 115V -Control Voltage: 24V -Frequency: 60 Hz -Connected Load of Machine: 35 kVA -Cable Cross-Sectional Area: 35 mm2 -Protection: 80 A Machine Overall Dimensions (L x W x H): 3,380 x 3,950 x 3,015 mm Weight of Machine: 7,800 kg

Condition: used, Specifications Manufacturer LORENZ Model LS 630 Condition Used Stock Number DCL1722 Module 12 Hedpewr Dx Usfx Abzsw Max diameter 630 mm Working stroke 220 mm Center distance worktable / cutter spindle 450 mm Machine weight 10.000 kg Spindle diameter 110 mm Table diameter 730 mm distance between table and spindle 580 mm Ø table hole 450 mm Description Equipped with : Change gears Manuals

Condition: not inspected (used), power: 2.2 kW (2.99 HP), Projection 650 mm Hedpfxjq U Ih Ds Abzew Speeds 12000/18000 rpm. Table 750 x 750 mm Table extension left

Condition: like new (used), functionality: fully functional, Year of construction: 2021, Information on request Hjdowbudgopfx Abzjw

Condition: not inspected (used), Year of construction: 2001, table diameter: 145 mm Max. workpiece outside diameter: 120 mm max. normal module: 3 mm Shaper head: Rapid, max. normal modulus 3mm weight: 8000 kg Price ex site for self dismantling. Optionally we can offer dismantling and loading. Description: -Documentation -stroke position adjustment -stroke length adjustment Hsdpfehufb Sox Abzsw Available immediately

Condition: like new (used), Year of construction: 2021, functionality: fully functional, inner diameter: 250 mm, outer diameter: 300 mm, For the production of internally and externally toothed cylindrical gears and other rolling profiles and shapes that regularly occur on the cylindrical workpiece circumference, as well as for the production of profiles using the single part process. incl. robot automation: coordinated Fanuc robot for loading and unloading TECHNICAL DETAILS CNC control: Siemens SINUMERIK 840 D sl External toothing: 300 mm Internal toothing: 250 mm Largest workpiece orbital diameter: 450 mm Nominal machine module: 8 mm Largest toothing width: 100 mm Shaping spindle stroke rate range Special version: 85 - 850 rpm Spindle diameter: 95 mm Mounting: HSK-B80 taper Distances and adjustment ranges Smallest pitch height of the hydrostatic inclined guide: 400 mm Hjdpfx Aovdtx Njbzew Smallest/largest distance between tool and workpiece axis: -70 / +230 mm Stroke position adjustment range (manual): 75 mm Stand lateral offset range: ±25 mm MACHINE DETAILS Weight of the machine: approx. 7,000 kg CONTROL AND DRIVE CNC control: Siemens SINUMERIK 840 D sl Control group: NCU 720.3PN with PLC 317-3PN/DP Drive system: SINAMICS S120 (digital drive technology) Measuring systems: - Absolute encoders for linear and rotary axes (except endless rotary axes) - Incremental measuring systems for C-axis NC axes: - Spindle stroke drive (A) - Workpiece rotation (C) - Tool rotation (C2) - Radial axis (X) shank and tool table Max. Shaping spindle speed: 12 rpm Max. Table speed: 300 rpm Max. Table torque: 220 Nm Table bore: diameter 150 mm, depth 253 mm Free support diameter: 365 mm (4 T-slots, M12 threaded holes) Radial drive: Max. Feed speed: 3,000 mm/min COOLING AND LUBRICATION SYSTEM Coolant tank capacity: approx. 550 l Cutting wheel cooling lubricant delivery rate: approx. 150 l/min Magnetic chip conveyor: - Nominal width: 230 mm - Discharge height: approx. 900 mm Lubrication and hydraulic system Tank volume: approx. 160 l Number of pumps: 2 (lubrication, hydraulic and hydrostatic) POWER SUPPLY Operating voltage: 400 V Control voltage: 24 V DC Frequency: 50 Hz Total connected load: approx. 25 kVA PROGRAMMING Standard dialog program: plain text operator guidance (German, English, Italian) Program functions: Single-cut cycle Multi-cut cycle (max. 3 cuts) Dimensional corrections Linear or degressive infeed EQUIPMENT 1 basic machine(s) AM 250 1 power clamping device 1 main column intermediate plate (150 mm high) 1 special ram head 0 - 110 mm stroke length 1 HSK-B80 tool holding cone 1 counter column with fixed counter support arm 1 counter column intermediate plate (100 mm high) 1 set of vibration isolators at no extra charge 1 Electronic handwheel 1 Extended software for fault diagnosis at no extra charge 1 Internet diagnostics system 1 Flow monitor 1 Flushing gun 1 150 mm diameter pipe socket 1 counterholder tip - rotating 1 draw tube and attachment bush AUTOMATION: 1 standard interface 1 Internal flushing of clamping top parts 1 Automatic loading door

Condition: new, - 2 pneumatic clamps - cooling - Material stop - documentation - 400V Hedogg N Taopfx Abzjw

Condition: good (used), Year of construction: 1973, FELLOWS 70-15 GEAR SHAPER - Model 70-15 Fellows heavy duty vertical gear shaping machine , suitable for the manufacture of external straight spur gears up to 70" pitch diameter, as well as internal spur gears and splines within a range of 0" to 88" pitch diameter, regardless of shaper-cutter radius. This unique feature, combined with the machines 15" face-width capacity and 1.7DP cutting capability in steel, provide a formidable platform for producing a wide range of larger geared part members. Equipped with: * Machine Main Base With Work-table, Upper Column, Cutter Ram and Slide of "Super Robust" Construction * Machine with "Saddle Backoff" Method of Cutter Relieving * Cutter Spindle 6.25" diameter w/Standard Straight Spur Guide * Cutter Positioning via Stroke Jog-Button * Rapid Rotation of Work Spindle for Trueing Work-Piece * Rapid Saddle Traverse for Traversing Saddle Relative to Work Hedpertrxijfx Abzow * Automatic Depth Feed Mechanism for One to Four Cuts, With 4 Speed Motor Providing Speed Change on Finishing Cut * Assorted Work and Feed Change Gears * Assorted Stroke Change Gears * 2" Riser Plate * Main Drive Motor 15HP, 650/220 rpm, 240 Volt 60Hz w/Westinghouse Rectifier Unit for AC * Power Forced Lubrication to Working Elements with "Lubriquip Lub Controller" * Coolant Tank, Pump, and Piping, With Chip Pan * Full Complement of Electrics * Assorted Guards, Covers * 84" T-Slotted Table * Hydraulic System * Work Lamp * Work Platform * Cutter Adaptor * Manuals Specifications: Max. Diameter External Gear Cut (Nominal): 70" Max. Diameter Internal Gear Cut (Nominal): 88" Max. Diameter Workpiece Accommodated: 104" Worktable Diameter: 84" Max. Permissible Weight of Workpiece & Fixture: 36,000 Lbs. Max. Distance Workspindle Centerline to Centerline of Cutter Spindle: 35" Min. Distance Workspindle Centerline to Centerline of Cutter Spindle: 0" Max. Work & Fixture Clearance Height w/Cutter Spindle in Upper Position: 28" Max. Diametral Pitch (full length teeth): 2 DP Max. Diametral Pitch (stub teeth): .75 DP Max. Diameter Pitch (30P.A. splines): 2-5/5 DP Diameter of Cutter Spindle: 6.25" Max. Stroke Length: 19.118" Max. Face-Width (nominal): 15" Stroking Speeds (infinitely variable): 5 to 122 S.P.M. Max. Infeed of Cutter Ram: .0020 inch/min. Min. Infeed of Cutter Ram: .0005 inch/min. Max. Rotary Feed Per Stroke (per 1" of cutter diameter): .0068"/Min. Min. Rotary Feed Per Stroke (per 1" of cutter diameter): .0006"/Min. Approximate Machine Dimensions: 192"L x 144"W x 150"H Approximate Machine Weight: 95,000 Lbs.

Condition: not inspected (used), Max. working length: 1000 mm Max. working width: 180 mm Hedpfx Aov Ifqlsbzew 3 pneumatic clamping cylinders 2 3 kW motors Hydraulic feed

Condition: new, - 2 pneumatic clamps - drilling device - cooling system - Material depot Hedeu Uii Hspfx Abzow - documentation - 400V

Condition: used, NEW BUTTER EXTRUDERS AND SHAPING MACHINES BUILT BY New Butter Extruder and Shaping Machines By Butter Extruder and Shaping Machine Butter Extruder Semi - Automatic Butter Extruder, Shaping and Cutting Machine fited on full stainless steel frame, Control panel. Two Stainless steel screw augers, stainless steel hopper. Cutting wires on outfeed conveyor making the machine user friendly . Extruding, Shaping and Cutting Machine Emergency Stop Button. Condition :New Mould Samples TECAFORM AH Blue Our New Special Designed Extruding Outlets TECAFORM AH Blue meets all applicable requirements for declaration of Food Contact. European regiulation EC 10/2011 and Ammednments European Regulation EC 1935/2004 Council Regulation EC 2023/2006 (GMP) FDA §21 CFR 177.2470 We use High Quality Parts Uses High Quality parts on the new range of DMUK EXSH 1 by Adding Certified Reducers, Stainless Steel Parts and Bestspoke Control Parts. Machine Design and Construction. Having Expirienced Engineers and Designers Working on a Full Range of Work Shop Machinery, CNC, Plasma Cutters, Moulding Machines we Provide High End Quality and Competitive Lead Times. Usage: Butter and Various Viscous Pastes Hedpfxeurulpe Abzow Construction: Fully Stainless steel and Glass Blasted to provide the finish on the metal and harden the surface. Shapes and sizes: Choose your own shpe and size Volumes: Depending on Model we can offer machines for 50g Up to 25Kg Blocks in Boxes. Hopper volumes on extruders: 18 Litres and 50Litres Control panel: Butter Working Switch, Butter Extruding Switch, Start/Stop and Safety: Machine is Equiped with Stainless Steel Cover that Brings The Machine To a Stop If This is Opened. Cutting: Cutting Wires come down manualy and bring the machine to a Stop Out feed: Out Feed Conveyor is Built with Stainless Steel Rollers that help the Prodcut Slide Out Avoiding any Sticking and Changing The Prodcut Shape. Electricity: This Machine can work on Single Phase 220v /50hz , 3Phase 400v / 50hz and US Electrics on 60hz. Choose on Order. Lead time: 5weeks Warranty: 12 months Spare parts: Dairy Machinery UK Finance Available: Pay Monthly, Ask For A Quote

Condition: excellent (used), CATALOG NUMBER 7650 Technical Data: - Max working length: 1500mm - Max working diameter: 250mm - Milling (disc milling cutter): 7.5kW - Spindle – 2800rpm 3kW - Spindle speed: 700/1200/1500/2000rpm - Grinding unit: 0.75kW - Hydraulic motor: 3kW - Total power: 17.75kW - Air requirement: 6-8bar - Feeder for blanks up to 150x150mm - Extraction port diameter: 100mm, 160mm - Transport dimensions (L/W/H): 4350x2300x1980mm - Weight: approx. 3000kg ADVANTAGES – German-made – Automatic hydraulic copy system – Original DTR documentation – Unpainted – Used lathe, in very good condition Net price: 69,900 PLN Net price: 16,640 EUR based on an exchange rate of 4.2 EUR (Prices may vary with significant exchange rate fluctuations) Hedpfx Ajwk Hbpebzjw

Condition: used, Year of construction: 1959, total height: 1,900 mm, total width: 2,200 mm, total length: 1,500 mm, Empty weight: 2.500 kg Price: On request - Year: 1959 - Documentation available: Yes - Serial number: 80 - Control: Conventional - Motor power: 5.0kW - Transport dimensions: 1500mm x 2200mm x 1900mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Hsdpfxowniiks Abzsw Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1990, functionality: fully functional, Commissioning: 1992 Control system: Fidia CNC 11 Spindle Ø: 130 mm Spindle speed: 80 - 3150 rpm Max. Milling power: 30 kW Hjdpfx Aerrf Rxebzsw Spindle bore: SK 50 Quill stroke: 200 mm Swivel capability: + / - 45° Travel: X-2400 mm Y: 1250 mm Z-1000 mm Feed range: 5 - 3000 mm/min Rapid traverse: 6 m/min Clamping surface: 3000 x 1250 mm Max. Table load: 10 to Total power requirement: 55 kW Space requirement: approx. 8500 x 5500 x 4500 mm Weight: approx. 47 tons Still under power.

Year of construction: 1994, condition: used, Used machine Year of manufacture: 1994 Hsdsw I Urvspfx Abzsw Condition: age-appropriate Equipment and technical data: Edging thickness max. 8 mm Workpiece thickness max. 60 mm Workpiece width min. 90 mm Operation via foot pedal Incl. extendable workpiece support Incl. chassis Incl. buffing unit Dimensions: approx. 700 x 600 x 1300 mm Weight: approx. 140 kg Suction nozzle: 70mm Availability: short term Location: Flörsheim

Condition: used, machine/vehicle number: 19013, Combined copying milling machine - lathe MICHÄL KÄMPF Hedsh Axryopfx Abzjw Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2013, condition: good (used), BHT INNOVA E3 Professional Bronchoscope Washer INNOVA – Professional Endoscope Washer for Practices and Small Clinics The INNOVA™ E3s is the world's best-selling BHT endoscope washer. This endoscope washer is compact and offers a high capacity for endoscopes or bronchoscopes. Depending on the reprocessing, a total of 10 to 20 endoscope reprocessings are possible daily. This makes it the perfect solution for private medical practices and small clinics that value safe hygiene, efficiency, and reliability. Reliability and maximum cleanliness in every cycle: Compliant with DIN EN ISO 15883-1/-4 and the guidelines of the Robert Koch Institute (RKI), and with many additional functions, e.g., thermal self-disinfection at 90°C according to DIN EN ISO 15883-4, 4.8.1. Hjdpfx Asin Edwsbzow - Flexible in combination with another INNOVA® E2 or E3 for 30 to 40 reprocessings daily. - Suitable for both glutaraldehyde and peracetic acid from a wide range of suppliers. - Suitable for commercially available endoscopes from Fuji, Olympus, Pentax, Storz, and Wolf. - Single-channel connection or patented pressure chamber available. - Thermal reprocessing option, e.g., for multiple biopsy forceps, polyp loops, etc. - Thermal disinfection of the final rinse water as recommended by the Robert Koch Institute (RKI) for the DH version. - Secure documentation and traceability through batch control. User and endoscope identification via barcode scanner. - Data output via printer, data logger, or computer interface. Easy integration into existing IT systems Number of endoscopes: For 2 endoscopes or 4 ENTs Hygienic design: Hygienic workflow, single-door Channel connection system: Single-channel connection or patented pressure chamber system possible Single-channel monitoring system (CMS): No Chemistry Glutaraldehyde / Peracetic Acid: Both possible: DH version (with boiler, for glutaraldehyde) or DC (filter solution, for glutaraldehyde or peracetic acid) Documentation and integration: Yes, interface for printer/data logger as standard. Printer as standard. Optional scanner/IT interface Thermal reprocessing of instruments at 90°C: Available with additional equipment Electrical installation: 3-phase 400 V / 50 Hz AC+N+PE. Connected load: 11 kW. Fuse rating: 3 x 20 A Year of manufacture: January 19, 2013 Item condition: used Find more items - new and used - in our shop! International shipping costs on request!

Condition: excellent (used), CATALOG NUMBER 6901 TECHNICAL DATA - max turning length: 1200 mm - max turning diameter: 210 mm - max turning diameter with standard steady rest: 90 mm - max dimension of square material for turning with automatic feed: 100 mm - 3 hydraulic copy attachments - additional 3 tools on hydraulic pistons (2 pieces installed) - 4 spindle speeds - automatic or manual machine operation - spindle motor power: 9 kW - hydraulic pump motor power: 3 kW - extraction nozzle diameter: 90 mm - transport dimensions (L/W/H): 3700x2100x2000 mm - weight: approx. 3000 kg ADVANTAGES – Italian production – automatic hydraulic copy attachment – original technical documentation (DTR) – not repainted – used lathe, in very good condition Hodokqui Rjpfx Abzew Net price: 63,900 PLN Net price: 15,200 EUR Net price calculated at the rate 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Condition: used, total height: 1,200 mm, total width: 1,200 mm, total length: 4,000 mm, Empty weight: 4.000 kg Hedpfxownib Te Abzsw - Documentation available: No - Control: Conventional - Transport dimensions: 4000mm x 1200mm x 1200mm (l x w x h) - Transport weight [kg]: 4000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 1993, operating hours: 9,000 h, air pressure: 6 bar, air demand: 12 m³/h, input voltage: 400 V, Rotox milling machine for alu and pvc windows and doors Hjdpfsu Dat Dox Abzew

Condition: used, Year of construction: 2008, total height: 1,450 mm, total length: 1,750 mm, total width: 1,500 mm, Empty weight: 750 kg Price: On request - Year: 2008 - Documentation available: No - CE marking present: Yes - Serial number: 108/1008-3 - Main motor power [kW]: 4 - Number of spindles [pcs]: 2 - Max. workpiece width [mm]: 180 - Transport dimensions: 1750mm x 1500mm x 1450mm (l x w x h) Hsdjwp D T Tjpfx Abzsw - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1954, total height: 2,000 mm, total width: 1,600 mm, total length: 2,400 mm, Empty weight: 10.000 kg Price: On request Chuck: 700mm  Workpiece maximum height: 550mm  X axis displacement: 450mm - Year: 1954 - Documentation available: No - Transport dimensions: 2400mm x 1600mm x 2000mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Hsdpfx Aoxbq U Ssbzew Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum