Used Counter for sale (2,493)

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 2,000 kg, lifting height: 115 mm, fuel type: electric, construction height: 1,160 mm, fork length: 1,150 mm, empty load weight: 149 kg, total length: 1,530 mm, drive type: Elektro, construction width: 540 mm, Low-lift pallet truck Load center: 600 Fork width: 160 mm Bedpfxs Aa Ef To Andodi Fork thickness: 47 mm Transmission: Electromechanical Condition: New Technical condition: New Front tire type: Polyurethane Rear tire type: Polyurethane Battery voltage: 48V Battery capacity: 20Ah Battery manufacturer: Noblelift Battery type: Lithium-ion Battery year of manufacture: 2026 Description: - PIN code access - Discharge indicator and operating hour counter, - Lithium battery - Cushioned side support rollers D80x30 - Tandem load rollers D80x70 Impulse control, CE certificate, Non-marking tires, Lithium-ion technology.

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 2,000 kg, lifting height: 115 mm, fuel type: electric, construction height: 1,160 mm, fork length: 1,150 mm, empty load weight: 149 kg, total length: 1,530 mm, drive type: Elektro, construction width: 540 mm, Low-lift pallet truck Load center: 600 Bdedpfx Anj Aa Egdsdoi Fork width: 160 mm Fork thickness: 47 mm Transmission: Electromechanical Condition: New Technical condition: New Front tire type: Polyurethane Rear tire type: Polyurethane Battery voltage: 48V Battery capacity: 20Ah Battery manufacturer: Noblelift Battery type: Lithium-ion Battery year of manufacture: 2026 Description: - PIN code access - Discharge indicator and operating hour counter, - Lithium battery - Cushioned side support rollers D80x30 - Tandem load rollers D80x70 Impulse control, CE certificate, non-marking tires, lithium-ion technology.

Condition: used, Year of construction: 2005, turning diameter 275 mm turning length 900 mm control TRAUB TX8i spindle passage 65 mm power capacity at 100 % load 25,20 kW power capacity at 40 % load 30,20 KW max. torque at 40% / 100% load 180 / 135 Nm spindle turning speed - stepless 1 - 5.000 U/min spindle diameter in front bearing 110 mm C-axis 1 - 500 U/min worktool support No. 1 x-axis 290 mm y-axis 165 mm z-axis 600/950 mm B - axis 360 ° rapid traverse X/Y/Z 18 / 18 / 30 m/min feed capacity X/Y/Z 10 / 10 / 7 kN number of tools 2x2 + 2x2 number of driven tools 2x2 + 2x2 mm toolpiece turning speed range 8.000 / 2.000 U/min power capacity at 25 % load 5,80 kW max. torque at 25% load 4x18,6 / 4x74 Nm tool taper TRAUB Ø60 worktool support No.2 / No.3 / No.4 x-axis 170 mm z-axis 600/950 mm y-axis +/- 60 mm rapid traverse X/Y/Z 18 / 15 / 30 m/min feed capacity X/Y/Z 10 / 10 / 7 kN tool turret - number of stations 10 number of driven tools 10 mm toolpiece turning speed range 1 - 6.000 U/min power capacity at 25 % load 5,80 kW max. torque at 25% load 18,60 Nm tool taper DIN 69880 Ø40x63 bar loader DNH61 / 3000 Bar length 1.000 - 3.200 mm bar material dia. 18 - 63 mm hexagon max.45 mm total power requirement 95,00 kW weight of the machine ca. 16,00 t dimensions of the machine ca. 10,00 x 3,50 x H3,00 m With TRAUB TX 8i control unit, main and counter spindle with C-axis, 3 turrets, 1 vertical-tool-carrier with B-axis, dust exhauster, chip conveyor, coolant system with coalescence-separator. Barfeeder TRAUB Stamag DNH61 /3000 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package Bjdpe Ac Uu Nofx Andedi Machine can be inspected under power.

Condition: ready for operation (used), Year of construction: 2018, spindle speed (max.): 6,000 rpm, travel distance X-axis: 135 mm, travel distance Z-axis: 235 mm, spindle motor power: 7,500 W, total height: 1,660 mm, total width: 2,150 mm, overall weight: 2,800 kg, controller manufacturer: FANUC, controller model: Series Oi-TD, product length (max.): 2,190 mm, number of slots in tool magazine: 8, number of axes: 3, This 3-axis Miyano BNA42S2 was manufactured in 2018. It features a maximum bar machining diameter of ø42 mm and a spindle speed range of 60 – 6,000 min⁻¹. The machine includes an 8-station turret capable of live tools and a maximum machining length of 100 mm. If you are looking to get high-quality turning capabilities, consider the Miyano BNA42S2 horizontal turning machine we have for sale. Contact us for further details. Main Drive • Number of spindles: 2 • Spindle motor power: Main spindle: 7.5 / 5.5 kW; Sub-spindle: 5.5 / 3.7 kW • Spindle speed range: Main spindle: 60 – 6,000 min⁻¹; Sub-spindle: 50 – 5,000 min⁻¹Movement • B-Axis: 310 mmTurret • Number of tool slots: 8 • Rotating tools: All positions capable of live/revolving tools with half-indexingMedia • Main electronic connection: 28 KVA (100 A fuse) • Cooling pressure: Coolant tank capacity: 165 LExtra Information • Maximum bar machining diameter: Main spindle ø42 mm (1.65 in); Sub-spindle ø34 mm • Power chuck: 5 inches • C-axis control and rigid tapping included on main spindle • C-axis control included on sub-spindle • Maximum machining length: 100 mm • Live tool motor: 2.8 / 1.0 kW • Live tool speed: Up to 5,000 min⁻¹ • Turning tool shank height: Square tool □20 mm • Drill shank diameter: ø25 mm (1 in) • B-axis is specified as Z2-axis stroke for pick-off and back machining Technical Specification Counter Spindle Yes Bdodpfxj Afkyte Andei Driven Tools Yes

Condition: used, Year of construction: 2004, Overview Isobarometric filler built in 2004 by the Italian manufacturer CIMEC, with 8 filling valves. The machine filled carbonated lemonade into glass bottles: 1,300 bottles/h in 33 cl and 750 bottles/h in 75 cl. Last production in 2022. The filler has been dismantled and is stored ready for shipment. Technical data Bdedpj Afd Htofx Andsi - Year of manufacture: 2004 - Filling system: isobarometric (counter-pressure), 8 filling valves - Output: 1,300 bottles/h (33 cl), 750 bottles/h (75 cl) - Product: carbonated soft drinks (lemonade) - Containers: glass bottles, 330 ml and 750 ml - Electrical supply: 400 V / 50 Hz, 3 kW - Compressed air: 6 to 7 bar, max. 120 Nl/min - Dimensions: approx. 1,600 x 1,400 x 2,400 mm (L x W x H) - Control: push-button panel with text display Equipment - Stainless-steel frame with transparent safety guarding - Electrical cabinet - Enerfluid side-channel blower - Pall filter housings - Conveyor section Condition Dismantled and stored, ready for shipment. Inspection by appointment. Availability Available immediately. Location: France.

Condition: good (used), Creasing and folding machine Heidelberg Stahlfolder + Popp Maschinenbau SRT + MWS Machine in very good condition, ready for production. Like new. Year of production 2012. It was used in the production of invitations, photo book inserts and leaflets. Modular design allows for expansion, e.g. installation of marking printers. Technical data: Paper format min 105 x 150 mm Paper format max 520 x 720 mm Feeding from a high stack Main and cross module with the possibility of installing creasing, perforating and cutting tools. Possibility of installing Heidelberg or Techni-Fold tools, Bdsdpfx Aez Dfr Ijndoi Smooth speed regulation Becker compressor Double sheet sensor Electronic counter with packaging Set of inspection cameras.

Condition: excellent (used), Catalog number: 7715 TECHNICAL DATA - Max. width of workpiece: 220mm - Max. height of workpiece: 130mm - 8 spindles: 1) Horizontal, lower: 220mm, 5.5kW 2) Vertical, right: 130mm, 7.5kW 3) Vertical, left: 130mm, 7.5kW 4) Vertical, right: 130mm, 5.5kW 5) Horizontal, upper: 220mm, 11kW – 5th spindle adjustable electrically, up/down 6) Horizontal, lower: 220mm, 5.5kW 7) Horizontal, lower: 220mm, 5.5kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) Universal: 220mm, adjustable 360°, 7.5kW - All spindles adjustable, up/down, left/right - Spindle diameter: 40mm – Top: - 6 infeed rollers, double-toothed, pull-type + 1 single - 3 outfeed rollers, pull-type, rubber, smooth, double + 3 single - Meter counter – Bottom: - 1 infeed roller, toothed, pull-type, swiveling in the lower table - 3 metal outfeed rollers, pull-type, smooth Bodozx Rlxspfx Andodi - Feed on Cardan shafts - Rollers with pneumatic pressure - Stepless feed speed adjustment + 2 speeds, 10-60m/min - Feed motor: 10kW - Electric adjustment of planing thickness - Body lifting motor: 0.75kW - Central lubrication of the table - Diameter of dust extraction nozzles: 5x140mm, 3x120mm - Machine dimensions (L/W/H): 4680x1780x1850mm - Control cabinet dimensions (on pallet): 1020x1000x2230mm - Weight: approximately 5000kg ADVANTAGES - 8 heads - Universal spindle - Ideal for both wet and dry wood - German production, WEINIG brand - Unpainted - Very few operating hours - Used planer, in perfect condition Net price: 125900 PLN Net price: 29280 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Condition: used, Year of construction: 2021, Drilling capacity in St 60 55 mm threading in St 60 M 30 M 36 Short spindle MK 4 spindle stroke 140 mm throat 300 mm column diameter 145 mm Bdjdpfxsz I Ub Ho Andji Machine table - usable table surface 615x430 mm T-Slots Amount - Width - Distance 2x14x224 mm distance spindle - column min./max. 150/735 mm feed 0,1 + 0,3 mm/U 0 stufenlos Spindle Speed 70-2.400 U/min. engine 3,0 kW machine weight ab. 380 kg Standard equipment: - 7" TFT LCD display with touch function: * Manual input of spindle speed set value * Actual speed display * Integrated drilling depth display with touch zero point transfer * Virtual drilling depth scale in the display * Machine status indicators and warnings on the display * Service information * Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Thread cutting device, for thread cutting with stop, max. 6 threads/min (thread cutting capacity depending on spindle speed), thread depth adjustable via depth stop and on the TFT LCD display (4 tools) - Infinitely variable speed adjustment via adjustment lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - anticlockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Clockwise and counter-clockwise rotation via contactor control - Control voltage 24 V, protection class IP 54 - Paint finish: DD textured paint signal white RAL 9003, PANTONE 4545c, black Item 20.5 Foot switch in addition to the thread cutting device, for switching the direction of spindle rotation in the process. direction of rotation during the process Item 25. Coolant unit B, consisting of: separate container (33 l), pump with motor protection switch, complete armature motor protection switch, complete fitting Item 37.5 Technology calculator in the display The technology calculator guides you through the cutting task Determination of the cutting data using the following parameters: - Manufacturing process - Tool diameter - Cutting speed - Material table - Transfer function of the spindle speed as set value

Condition: used, Year of construction: 2002, machine/vehicle number: 96.164, functionality: unexamined, overall weight: 3,000 kg, spindle diameter: 40 mm, number of spindles: 6, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of spindles: 6 Spindle 1 Spindle type: Bottom Spindle diameter: 40 mm Spindle 2 Spindle type: Right Motor power: 11 kW Spindle diameter: 40 mm Spindle 3 Spindle type: Left Spindle diameter: 40 mm Spindle 4 Spindle type: Top Motor power: 11 kW Spindle diameter: 40 mm Spindle 5 Spindle type: Top Motor power: 7.5 kW Spindle diameter: 40 mm Spindle 6 Spindle type: Bottom Motor power: 7.5 kW Spindle diameter: 40 mm Infeed table length: 945 mm Diameter of feed rollers: 140 mm Conveyor motor: 14 kW Conveyor drive: Cardan shaft drive Bedpfx Aoz Nir Rendodi Tool type: Standard Lubrication system: Manual MACHINE DETAILS Diameter of extraction nozzle: 140 mm Voltage: 400 V Fuse: 63 A Dimensions & Weight Dimensions (L x W x H): 4,100 x 2,100 x 2,400 mm Empty weight: 3,000 kg Transport packages: 1 EQUIPMENT Tools for Spindle 1 Tools for Spindle 2 Tools for Spindle 3 Tools for Spindle 5 Tools for Spindle 6 NOTE Spindle 1 The brake is weak. The counter for the height adjustment is defective. Spindles 2 and 3 – shared motor The brake is defective. The height adjustment of Spindle 2 is very stiff and seized. The counters for the height and width adjustment of Spindle 2 are defective. The counters for the height and width adjustment of Spindle 3 are defective. Spindle 4 The spindle can only be turned with great difficulty; the bearings are defective. The height adjustment is seized. Spindle 5 The counter for the height adjustment is defective. Spindle 6 The width adjustment is seized, and the corresponding counter is defective. The motor emits a humming sound, presumably caused by the brake. Other defects The drive belts for spindles 1 and 6 are in very poor condition. The switch on the front of the machine for adjusting the table height is defective. The pressure reducing valve and the moisture separator need to be repaired or replaced. The lubrication pump is defective and needs to be repaired or replaced. The mechanism for speed regulation is defective and seized. The rubber coupling elements for the height adjustment are defective. Conclusion Due to the defects listed above, the machine could not be put into operation for testing purposes.

Condition: good (used), MBO T500F Folding Machine Machine in very good condition, ready to work. Minimum paper size: 105 x 150 mm Maximum paper size: 520 x 720 mm High stack feeding 4 cassettes with micro-adjustment and cutting Bodpfx Anoz Iczzjdjdi Casket and compressor noise reduction Electronic counter with batching Electric delivery Machine in very good condition, ready to work.

Condition: used, mileage: 6,804 km, power: 81 kW (110.13 HP), first registration: 05/2024, fuel type: diesel, overall weight: 2,825 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,050 mm, total width: 2,032 mm, total height: 1,975 mm, loading space length: 2,602 mm, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and omissions excepted! Internal number: 0906. PM79411 ----EQUIPMENT * Airbag (passenger side) * Trailer coupling, preparation kit - Electrical preparation kit for trailer coupling - Wiring harness, 13-pin socket, and trailer module for retrofitting a trailer coupling * Exterior mirrors, electrically adjustable, heated, and foldable Bedpoz Ik Hfsfx Andodi * Acceleration control, intelligent * Double locking for central locking * Rear window, heated, fixed - Interior mirror - Partition with window * Fuel tank 70 liters * LED headlights - LED high beam - LED low beam - LED daytime running lights incl. integrated LED turn signals at the front - Cornering lights, static - High beam assistant * Load compartment protection package - Side panel lining, high - Load compartment floor, vinyl floor covering "Easy Clean" - Load compartment lighting (LED), extra bright * Load securing package - Airline rails on the side walls, left and right, in the middle position, for load securing and 8 lashing points, incl. load securing box with ratchet straps and hooks. * Socket: 12-volt socket in the load compartment (D-pillar) * Partition (metal) with window * 2-stage release for passenger compartment and load compartment (rear door flaps or rear swing door). Prevents locking of open doors. * Transmission: 6-speed manual transmission * Anti-lock braking system with electronic brake force distribution (EBD) * Airbag driver side * Exterior mirror housing made of plastic, black-grey * Battery: H7 AGM single battery * On-board computer with fuel consumption and mileage information (e.g. remaining range) and outside temperature display * Roof, flat * Roof console * Double-wing rear door with 180° opening angle * Rev counter * Third brake light * Electronic Stability Program (ESP) - Hill start assist - Safety brake assist (EBA - Emergency Brake Assist) - Traction control (TCS) * Power windows front, electric - with quick-down/-up function for the driver's side * Parking brake electronic * FordPass Connect - incl. live traffic information and 5G Modern WLAN hotspot * Windscreen, heated * Grab handle, driver and passenger side * Glove compartment with lockable lid * Interior lighting front with delay function * Automatic climate control front - with recirculation heating - with R-1234yf refrigerant * Headrests front (3) * Paint: Solid color * Steering wheel: Steering wheel made of plastic * Center console, small * Emergency call assistant eCall emergency call system to send an emergency call in the event of an accident or manual activation * Technology package 2 (Trend) - Ford audio system with 13 multifunction display and Ford SYNC 4 - Pre-Collision Assist, camera-based - Driver drowsiness warning - Traffic sign recognition system - Wrong-way driver warning - Lane keeping assistant incl. lane departure warning - Park pilot system front and rear - Cruise control - Intelligent speed limiter with speed limit display - Rear view camera * Particle filter: Diesel particulate filter * Radio: Ford audio system with 13 multifunction display and Ford SYNC 4 - Digital radio reception DAB/DAB+ (Digital Audio Broadcasting) - FordPass Connect incl. live traffic information and 5G Modern WLAN hotspot - 13-inch TFT multifunction display - Integrated control panel and audio remote control on the steering wheel - Ford SYNC 4 with AppLink and touchscreen - AppLink - Amazon Alexa Built-in voice assistant - 4 speakers * Tire pressure monitoring system (TPMS - Tyre Pressure Monitoring System) * Windsh

Condition: ready for operation (used), Year of construction: 2020, operating hours: 20,292 h, spindle speed (max.): 3,250 rpm, travel distance X-axis: 308 mm, travel distance Z-axis: 1,240 mm, spindle motor power: 33,000 W, overall weight: 7,200 kg, controller manufacturer: SIEMENS, controller model: Siemens 840D with ShopTurn, number of slots in tool magazine: 12, number of axes: 3, This 3-axis DMG MORI CLX 550 V3 was manufactured in 2020. It features a maximum turning diameter of 480 mm and a turning length of 1240 mm. The machine is equipped with a 12-position VDI 40 turret and a maximum spindle speed of 3250 rpm. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 550 V3 horizontal turning machine we have for sale. Contact us for further details. • Control panel: DMG MORI SLIMline Multi-Touch, 19-inch touchscreen • Controlled axes: 3 (X, Z, C) • Spindle operating hours: approx. 20,292 hWorking capacity and axes • Max turning diameter: 480 mm • Max turning length: 1,240 mm • Swing over bed: 700 mm • Swing over cross slide: 500 mm • Rapid traverse X/Z: 30 m/min • Main spindle C-axisMain spindle and chuck • Spindle nose: A2-8 • Upgraded bar capacity: 102 mm • Spindle power: 33 kW @ 40% / 22 kW continuous • Spindle torque: 630 Nm @ 40% / 420 Nm continuous • Hydraulic chuck: SMW BH-D 320 / A2-8, D103 mm • Differential clamping pressure functionTool turret and driven tools • Turret: 12-position VDI 40 with 6 additional BT stations • Driven tools: yes • Max driven-tool speed: 4,000 rpm • Driven-tool power: 5.44 kW @ 40% • Driven-tool torque: 20 Nm @ 40%Tailstock • Tailstock travel: 1,200 mm • Centre taper: MT5 • Max thrust: 12 kNEquipment and options • Setup package • Tropical climate package • 12-bar coolant supply system • Manual working-area washdown gun • Variable spindle speed function • DMG MORI Service Agent • DMG MORI Messenger V2 • DMG MORI NETservice • DMG MORI IoTconnector Bdedpfxjz Ipaws Andsi • Screen languages: German/PolishConstruction • Inclined cast-iron bed • Linear guideways, width 45 mm Additional equipment • Mechanical oil mist extraction unit, 1,100 m³/h • WTO VDI 40 driven-tool holder set • Set of three soft jaws for BH-D315 chuck Technical Specification Counter Spindle No Driven Tools Yes

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS21, Exhibition unit ATLANTA NEOS stretch wrapper with articulated arm 99 individually storable programs Start/stop at the same position (corner counter) Wrapping height 2000 mm Mast height approx. 1500 mm (fits through almost any door and in almost any van) Powerstretch PRS 200% film (more available as an option) Motorized pre-stretch system with stepless adjustment Electronically controlled film tension via control unit IEF quick-loading system for easy film roll changes Film specifications: Max. outer diameter Ø300 mm – height = 500 mm – core Ø76 mm Automatic film cutting unit (available as an option) Film tension storable in 4 steps TECHNICAL DETAILS: Two maintenance-free 12 V – 100 Ah AGM batteries connected in series Minimum 160 pallets per Charging – Charging time: 8-10 hours High-frequency battery charger with LED display Wrapping height “Machine with MAST (pallet included) 2,150 mm Height measurement via light sensor or dimension input on the display Protective bar for emergency stop of the drive Emergency stop switch compliant with CE regulations Acoustic warning signal and warning light at machine start Fall protection for the film carriage Push buttons for start & stop Machine function compliant with CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters adjustable via display - Display lock for program changes - Adjustable machine speed around the pallet up to 80 m/min Upward and downward carriage speeds independently adjustable - Upward carriage speed from 1.3 to 5.4 m/min - Downward carriage speed from 1.3 to 5.4 m/min - Number of wraps at the pallet base (1-10 wraps) - Number of wraps at the pallet head (1-10 wraps) - Pallet wrapping height adjustment - Film application tension for foot and head wrapping / ascending and descending, independently adjustable - Film pre-stretch for foot and head wrapping / ascending and descending, independently adjustable - Ergonomic height for film changes ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable wrapping programs for the NEOS arm - Cross wrapping (upward/downward) Bdsdpfx Asz Iq Trsndei - Simple wrapping (upward only or downward only) - Wrapping cycle with preset start and stop height - Wrapping to a preset height (with the height sensor deactivated) - Wrapping cycle for large pallets - Wrapping cycle for top sheet film - Soft start cycle for applying edge protection - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp edges Pallet edge wrapping Wrapping cycle with manual or motorized cord formation (optional) Further systems available immediately from our Ludwigsburg warehouse Also available with the ARYA system – automatic film application possible

Condition: ready for operation (used), Year of construction: 2025, spindle speed (max.): 2,400 rpm, travel distance X-axis: 508 mm, travel distance Y-axis: 152 mm, travel distance Z-axis: 711 mm, spindle motor power: 29,800 W, overall weight: 9,253 kg, number of axes: 4, This 4-axis HAAS ST-40SY was manufactured in 2025. It features a maximum part swing of 35.5 in and a maximum cutting diameter of 27.5 in. The machine is equipped with a 12-station turret and live tooling capabilities, allowing for versatile machining operations. If you are looking to get high-quality turning capabilities, consider the HAAS ST-40SY horizontal turning machine we have for sale. Contact us for further details. • Working Hours: 0 • Showroom Machine • Chuck Size: 15.0 in / 381 mm • Max Part Swing: 35.5 in / 902 mm • Max Cutting Diameter (with BMT75 turret): 27.50 in / 699 mm • Max Cutting Length: 28.0 in / 711 mm • Bar Capacity: 4.00 in / 102 mm • X Axis Rapids: 472 ipm / 12.0 m/min • Y Axis Rapids: 472 ipm / 12.0 m/min • Z Axis Rapids: 710 ipm / 18.0 m/min • Max Thrust X: 5500 lbf / 24465 N • Max Thrust Y: 2300 lbf / 10231 N • Max Thrust Z: 9000 lbf / 40034 N • Spindle Nose: A2-8 • Drive System: 2-Speed Gearbox • Spindle Max Torque: 1400.0 ft-lbf @ 150 rpm / 1898.0 Nm @ 150 rpm • Spindle Bore ø: 4.62 in / 117.3 mm • XP Option Drive System: 2-Speed Gearbox • XP Option Max Rating: 55.0 hp / 41.0 kW • XP Option Max Speed: 2400 rpm • XP Option Max Torque: 2100.0 ft-lbf @ 150 rpm / 2847.0 Nm @ 150 rpm • Main Spindle C Axis Max Rating: 5.0 hp / 3.7 kW • Main Spindle C Axis Max Speed: 49 rpm • Main Spindle C Axis Positioning: ± 0.01 ° • Main Spindle C Axis Brake Diameter: 21.5 in / 546 mm • Main Spindle C Axis Brake Holding Torque: 450 ft-lbf / 610 Nm • Tailstock Taper: MT5 • Tailstock Travel: 26.0 in / 660 mm Bsdpez Nx Rcofx Andjdi • Tailstock Max Thrust (Acme): 3,000 lbf / 13,345 N • Tailstock Min Thrust (Acme): 200 lbf / 890 N • Turret Number of Tools: 12 Stations • Turret Index Time (one tool): 2 s • Turret Tooling: BMT75 • Live Tooling Max Speed: 4000 rpm • Live Tooling Tooling: BMT75 • Coolant Capacity: 95 gal / 360 L • Air Requirements: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Inline Air Hose: 3/8 in • Air Pressure Min: 80 psi / 5.5 bar • Input AC Voltage (3 Phase) - Low: 220 VAC • Full Load Amps (3 Phase) - Low: 70 A (Standard) / 105 A (XP Option) • Input AC Voltage (3 Phase) - High: 440 VAC • Full Load Amps (3 Phase) - High: 35 A (Standard) / 53 A (XP Option) • Domestic Pallet Dimensions: 217.0 in x 95.0 in x 116.0 in / 551 cm x 241 cm x 295 cm • Export Crate Dimensions: 217.0 in x 95.5 in x 120.5 in / 551 cm x 243 cm x 306 cm • Export Crate Weight: 22,141 lb / 10,043.0 kg Additional equipment • Chip conveyor • Remote jog handle / CNC control pendant • Auto-door feature • Eppinger Preci-Flex live tooling holders • Samchully 3-jaw chuck • Tool setter / touch probe • Coolant/air blow hose Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2023, spindle speed (max.): 6,000 rpm, travel distance X-axis: 200 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 406 mm, spindle motor power: 11,200 W, number of axes: 3, This 3-axis HAAS ST-10Y was manufactured in 2023. It features a maximum cutting diameter of 11.00 in and a maximum cutting length of 16.0 in. The machine is equipped with a 12-station turret and offers rapid movements of up to 1200 ipm on the Z-axis. If you are looking to get high-quality turning capabilities, consider the HAAS ST-10Y horizontal turning machine we have for sale. Contact us for further details. • Working Hours: 0 • Showroom Machine • Chuck Size: 6.5 in / 165 mm • Max Part Swing: 16.5 in / 419 mm • Max Cutting Diameter: 11.00 in / 279 mm (with BMT45 turret) • Max Cutting Length: 16.0 in / 406 mm • Bar Capacity: 1.75 in / 44 mm • Rapids on X: 472 ipm / 12.0 m/min • Rapids on Y: 472 ipm / 12.0 m/min • Rapids on Z: 1200 ipm / 30.5 m/min • Max Thrust X: 2400 lbf / 10676 N • Max Thrust Y: 2300 lbf / 10231 N • Max Thrust Z: 3700 lbf / 16458 N • Spindle Nose: A2-5 • Spindle Max Torque: 75.0 ft-lbf @ 1300 rpm / 102.0 Nm @ 1300 rpm • Draw Tube Bore ø: 1.81 in / 46 mm • Spindle Bore ø: 2.31 in / 58.7 mm Bdodpfx Anez Nz T Hodsi • Main Spindle C Axis Max Speed: 60 rpm • Main Spindle C Axis Positioning: ± 0.02° • Sub-Spindle Chuck Size: 5.3 in / 135 mm • Sub-Spindle Max Speed: 6000 rpm • Tailstock Taper: MT3 • Tailstock Hydraulic Quill Travel: 3.8 in / 95 mm • Turret Stations: 12 Stations (BMT45) • Live Tooling Max Speed: 4000 rpm • Coolant Capacity: 30 gal / 114 L • Air Required: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Shipping Weight: 7900 lb / 3584.0 kg Additional equipment • Robot Package Max Load Capacity at Wrist: 15.4 lb / 7 kg • Robot Package Reach: 35.9 in / 911 mm • Robot Package Repeatability: 0.0004 in / 0.010 mm • Robot Single Gripper Max Part Weight: 7.9 lb / 3.6 kg • Robot Dual Gripper Max Part Weight: 5.0 lb / 2.3 kg per gripper Technical Specification Counter Spindle Yes Driven Tools No

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 3,400 rpm, travel distance X-axis: 213 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 572 mm, spindle motor power: 22,400 W, overall weight: 5,580 kg, number of slots in tool magazine: 12, number of axes: 3, This 3-axis HAAS ST-25Y was manufactured in 2022. It features a maximum cutting diameter of 11.75 in and a maximum cutting length of 22.5 in. The machine is equipped with a 10 in chuck size and a robust spindle speed of 3400 rpm. If you are looking to get high-quality turning capabilities, consider the HAAS ST-25Y horizontal turning machine we have for sale. Contact us for further details. • Working hours: 0 (showroom machine) • Chuck size: 10.0 in / 254 mm • Max part swing: 21.0 in / 533 mm • Max cutting diameter (with BMT65 turret): 11.75 in / 298 mm • Max cutting length: 22.5 in / 572 mm • Bar capacity: 3.00 in / 76 mm • Rapids (X / Y / Z): 472 ipm (12.0 m/min) / 472 ipm (12.0 m/min) / 945 ipm (24.0 m/min) • Max thrust (X / Y / Z): 4100 lbf (18238 N) / 2300 lbf (10231 N) / 5100 lbf (22686 N) • Spindle nose: A2-6 • Max spindle torque: 300.0 ft-lbf @ 500 rpm / 407.0 Nm @ 500 rpm • Spindle bore diameter: 3.50 in / 88.9 mm • Main spindle C axis max rating: 5.0 hp / 3.7 kW • Main spindle C axis max speed: 60 rpm • Main spindle C axis positioning: ± 0.01° • Main spindle C axis brake diameter: 13.9 in / 353 mm • Main spindle C axis brake holding torque: 250 ft-lbf / 339 Nm • Sub-spindle chuck size: 5.3 in / 135 mm • Sub-spindle nose: A2-5 • Sub-spindle max speed: 6000 rpm Bodpoz N Dmvefx Andedi • Sub-spindle max sync speed with main spindle: 3400 rpm • Sub-spindle chuck throat: Ø 1.30 in x 1.37 in deep / Ø 33.0 mm x 34.8 mm deep • Sub-spindle drawbar bore (non-through): Ø 1.00 in x 4.50 in deep / Ø 25.4 mm x 114.3 mm deep • Sub-spindle bore (without chuck and drawbar): 1.50 in / 38.1 mm • Sub-spindle integrated brake torque: 17 ft-lbf / 23 N·m • Sub-spindle orientation accuracy: ± 0.02° • Sub-spindle rapids (B-axis): 400 ipm / 10 m/min • OD vs ID tools: Any combination • Boring bar rear clearance: 4.00 in / 102.0 mm • Live tooling max speed: 4000 rpm • Live tooling interface: BMT65 • Coolant capacity: 55 gal / 208 L • Air requirements: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Inline air hose and coupler: 3/8 in • Minimum air pressure: 80 psi / 5.5 bar • Drive system: Direct speed, belt drive • Electrical requirements: Low 220 VAC @ 70 A / High 440 VAC @ 35 A (3 Phase) • Shipping dimensions (domestic): 142.0 in x 90.0 in x 92.0 in / 361 cm x 229 cm x 234 cm Technical Specification Driven Tools Yes Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 1992, operating hours: 60,000 h, spindle speed (max.): 3,000 rpm, travel distance X-axis: 340 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: FANUC, controller model: Series 15 T, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 1992. This Monforts RNC 5 features a maximum turning diameter of 340 mm and a turning length of 1000 mm. It is equipped with a control system from Fanuc Series 15 T and offers 12 tool positions for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the Monforts RNC 5 machine we have for sale. Contact us for further details. - Typical Workpiece Materials: Case-hardening steel - Typical Workpiece Components: Shafts, gears - Production Environment: Single parts and small series- Max. Swing Diameter over Bed: 600 mm- Swing Diameter over Bed Slide: 450 mm- Max. Turning Diameter: 340 mm- Max. Turning Length: 1000 mm- Turning Diameter Range: 50 - 250 mm- Number of Tool Positions: 12 tools- Driven Tools Power: 4.5 kW- Driven Tools Speed: 3000 rpm- Counter Spindle: No (Single main spindle machine)- Material Clearance / Spindle Bore: 85 mm- Bar Capacity Max.: 78 mm- Chuck Work Max Weight: 25 kg- Center Work Max Weight: 35 kg Bdedpfxoz N Hbco Andei Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2011, operating hours: 44,137 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 190 mm, travel distance Z-axis: 330 mm, number of axes: 2, Horizontal turning machine manufactured in 2011. This Mazak Quick Turn Smart 100 S (QTS 100 S) features a maximum turning diameter of approximately 280 mm and a turning length of about 308 mm. It includes a 12-position drum turret for efficient tool changes and a programmable tailstock. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn Smart 100 S machine we have for sale. Contact us for further details. MAZAK Quick Turn Smart 100 S (2011) - INFO- Main Spindle C-Axis: Without C-axis - Control: Mazatrol Smart (10.4" Color LCD) - Operating Hours: 44,137 hours - Turning Length: approx. 308 mm (Z-travel approx. 340 mm) - Turning Diameter: max. approx. 280 mm - Swing Diameter: approx. 584 mm - Turret: 1 Turret, 12-position drum turret (Bolt-on type), index time 0.17 s - Tool Holder: Mazak block holder (Bolt-on), various tool adapters / tool holders included - B-Axis (stepless 0.001°): No - Tailstock: Yes, programmable tailstock (centering point MT 4) - Main Spindle Speed: 6,000 rpm (Spindle nose A2-5, drive approx. 11 / 7.5 kW) Bdedpsz N Hdwefx Andji - Bar Loader: No (Defective) - Bar Capacity / Passage: Ø 42 mm (Standard chuck 6" / 152 mm, 3-jaw hydraulic) - Optional (not included) Various tool adapters, tool holders, clamping devices, and set of collets - Chip Conveyor: No Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2006, spindle speed (max.): 2,400 rpm, travel distance X-axis: 432 mm, travel distance Z-axis: 1,118 mm, spindle motor power: 29,800 W, overall weight: 11,000 kg, number of axes: 3, This 3-axis HAAS SL-40HE CNC turning center was manufactured in 2006. It features a maximum spindle speed of 2,400 rpm, a swing diameter over bed of 1,016 mm, and a Z-axis travel of 1,118 mm. The machine is equipped with a full-featured C-axis and driven tools, providing versatile machining capabilities. If you are looking to get high-quality turning capabilities, consider the HAAS SL-40HE machine we have for sale. Contact us for further details. • Swing over bed: 1,016 mm • Swing over cross slide: 635 mm • Max. bar capacity: 101.6 mm • C-axis: Full-featured C-axis • Tool presetter: Yes • Spindle nose: A2-8 • Spindle bore: approx. 116.8 mm • Gearbox: 2-speed • Chuck: Kitagawa B-15, 3-jaw • Vector drive: 40/30 HP closed-loop vector drive • Electrical enclosure: NEMA Type 1 (indoor use only) • Voltage: 360/480 V • Phase: 3 • Frequency: 50/60 Hz • Full load: 40 A • Largest load: 70 A • Short-circuit interrupting capacity: 10,000 A • Machine status: Dismantled, not under power; seller can load on truck with crane for approx. €800 Additional equipment • Iscar Fast Feed Tools tooling/solutions (as indicated by stickers) • Work light Bdjdpfx Anjz Ryqmsdoi • Coolant tank and chip tray assembly • Foot pedal control • Status beacon light Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2021, HT45-G3-SM2Y/FANUC WITH POWERED TOOLS AND Y-AXIS CNC turning machine for complete machining of turning-milling parts with 2 spindles, 2 tool systems, 6 linear axes and 2 rotary axes, integrated spindle motors on main and counter spindle (water- cooled), pre-tensioned roller guides. Drive power: Main spindle - 15 kW Counter spindle - 15 kW Bdsdpjz Rzh Hofx Andsi Speed range: Main spindle 0 – 7000 min-1 Counter spindle 0 – 7000 min-1 Spindle connection (DIN 55026): Main spindle: KK 5 (max. bar diameter ø 45 mm) Counter spindle: KK5 Y-axis: • Travel range: +40/-40 mm • Rapid traverse speed: 15 m/min Includes: • Draw tube on the main spindle • Pull rod for the main/counter spindle • Mechanical spindle brake (main/counter spindle) • Part ejector and flushing through the counter spindle • Fanuc 31i-B control - EMCONNECT/APP based user interface - Manual Guide i dialog programming - 22" Multi-Touch Display - USB interface - Network drive / Ethernet - 3D Simulation - LED status bar, and more • 2x 12-position tool turret VDI 25 radial with direction logic for up to 2x12 powered tool stations (HSC turret)! Swivel speed adjustable with feed switch! Performance data: - Max. speed: 8000 rpm - Max. continuous speed: 6000 rpm - Max. drive power: 4 kW - Max. torque: 16 Nm - C-axis for main and counter spindle - TRANSMIT software for easy C-axis programming • Chip conveyor with a discharge height of 1100 mm, programmable (Type "hinge belt") • Coolant system integrated in the chip conveyor 2 high-pressure pumps with 14 bar 2 flushing pumps with 3.7 bar • Air gun with spiral hose • LED machine room light • Hydraulic unit • Vibration-damping leveling feet • Mounting angle and high-performance anchors • Documentation / CE certificate Year of construction: 2021 Machine no. S3K212051 Includes: various accessories

Condition: used, Year of construction: 2006, spindle bore: 65 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, NC Lathe (with 2nd spindle, 3 turrets and Y-axis) Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock. Bedpfx Ae Aawrlondjdi

Condition: used, Year of construction: 2006, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, total width: 1,990 mm, total length: 4,500 mm, total height: 2,300 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, overall weight: 9,000 kg, Gildemeister Sprint 65 Linear - CNC Lathe (with 2nd spindle, 3 turrets and Y-axis) Technical details: Spindle bore diameter 65 mm Bdsdpo Aawvwofx Andji Spindle speed 5.000 R/min Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), The machine is in perfect condition and has 1.8 million operating hours recorded on its counter. The following options are included: PF 707m / PF 711 / IQ 501 / IC 604 / FA 502 / RU 518 / FS 532 / SD 510. Bdjdpfx Anjz Tzvcjdsi

Condition: excellent (used), The machine is in very good condition and has 4.5 million operating hours on the counter. The following options are included: PF 707m / IQ 501 / RU 518 / FS 532 / IC 313 / FA 502 / HM 103 / LU 202xlm. Bdedpfxez Tzwyj Andsi

Condition: excellent (used), Year of construction: 2005, Shinohara 75 V H Year: 2005 Counter: 21 million 5 colors Maximum format: 520 x 750 mm Maximum plate format: 745 x 605 mm Thickness: 0.04–0.60 mm Maximum speed: 16,000 sheets/hour Double impression cylinder CIP 3 IR Powder sprayer Alcohol-based dampening system Baldwin cooling and circulation system High-pile delivery Bodpfxo Adzguj Andedi Remote ink fountain control Semi-automatic plate changing (Autoplate) Automatic washing of rollers and rubber blankets