Used Sales Counter for sale (27,856)

Condition: used, Niggestich VA Gastronomy Counter Hedju Egn Repfx Airow 3 heated water baths / bain-maries a = W x D x H 30 x 50 x 21 cm + additional water bath Tray storage Dimensions: H x W x D = 90 x 233 x 110 cm Inlet and outlet levers for the water baths Refrigerated drawers and a refrigerated compartment (without refrigeration unit) Please inquire about shipping/freight costs. Shipping/freight costs depend on quantity, weight, dimensions, and postal code. You can find more items – new and used – in our shop!

Condition: good (used), Sales counter, counter, stainless steel, cabinet, work table Hsdpfxeb Uhnij Airow -Drawers: 2 -Table dimensions: 700/1600/H830 mm -Roof dimensions: 1800/1670/H2330 mm -Design: stable -Transport dimensions: 2060/730/H870 mm -Weight: 120 kg

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 68370, SMB Technik Multima 9R/9L/3K automatic beer bottling monobloc for rinsing, counter-pressure filling and crown capping of glass bottles. The machine was previously in operation at a Norwegian brewery. Following the sale and removal of the labelling machine, an electric motor is required to drive the bottling line. The electric motor is not included in the sale. The SMB rinsing, filling and capping monobloc was operational prior to this change and can be inspected at its current location in Norway. CONFIGURATION * 9-station bottle rinser * 9-head counter-pressure filler * 3-head crown capper * Automatic bottle transfer through rinsing, filling and capping sections * Conveyor sections * CO₂ counter-pressure / isobaric filling * Long-tube bottom-up filling * Separate bottle pressurising and return-gas system * Automatic filler bowl level and pressure control * High-pressure injection / jetter before capping * Electrically interlocked safety doors * Automatic bottle presence monitoring FILLING PROCESS The Multima is designed for bottling beer in glass bottles. Bottles are rinsed before being transferred to the filling section. Hsdpoz Dhrqjfx Airew Before filling, the bottles are pressurised, normally using CO₂. Beer is then filled from the bottom through long filling tubes. The system uses separate channels for bottle pressurising gas and return gas and is designed to minimise turbulence, foaming and oxygen uptake. After filling, the bottles pass a high-pressure injection device (jetter), which produces controlled foaming to help displace air from the bottle neck immediately before crown capping. TECHNICAL DATA Manufacturer: SMB Technik GmbH, Mannheim, Germany Model: Multima 9R/9L/3K Year: 2000 Serial number: 68370 Electrical supply: 400 V / 50 Hz Current: 12 A Container: Glass bottles Product: Beer Closure: Crown caps Filling principle: Counter-pressure / isobaric Rinser: 9 stations Filler: 9 filling valves Capper: 3 heads A 400 V to 230 V converter is included in the sale. DOCUMENTATION Extensive original SMB technical documentation is available, including operating instructions, setup and adjustment procedures, bottle changeover information, cleaning and sanitising procedures, maintenance and troubleshooting information, as well as filling-valve technical documentation. IMPORTANT The labelling machine has been sold separately and is NOT included. An electric motor is required to operate the bottling line and is NOT included. Tanks and other brewery equipment visible in the photographs are not included unless specifically agreed. The machine is located in Norway and can be inspected by appointment. Dismantling, loading and transport can be discussed separately.

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: 460923-80034645-001, This is an under-counter refrigeration unit from the manufacturer NordCap, which is perfectly suited for installation under existing cooking ranges or grill stations. The unit was manufactured by the premium manufacturer Ideal. The under-counter refrigeration unit features a built-in stainless steel evaporator and is equipped with 4 full-extension drawers. The usable height is 90 mm per drawer. Two identical units are available for sale. The unit has been inspected in our in-house workshop and is fully functional. The unit was only used for 6 months and was stored due to the business closure. Condition: very good (used). The list price is €5,500 net. You will receive an invoice with VAT shown. Our used equipment service for you: * 6 months warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs * High-quality brand-name equipment at fair prices * Professional overhaul/inspection & expert cleaning * Inspected & fully functional - or money back * Shipping or self-collection can be flexibly selected * Competent advice - before and after purchase * Provision of operating instructions, connection diagrams & spare parts * Inspection according to DGUV V3 Technical data: * W x D x H: approx. 1380 x 660 x 410 mm * Power connection: V: 230 / kW: 0.265 * Serial number: 460923-80034645-001 Hsdozu Sapjpfx Airow * Year of manufacture: 2019 Condition: used, inspected, fully functional Shipping: * Delivery or self-collection by arrangement * Worldwide shipping on request * Shipping to islands or mountain stations only by arrangement Do you have any questions, would you like to receive advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. Subject to changes and errors. The sale is exclusively subject to our general terms and conditions (GTC), which can be found under the link "Legal Information".

Condition: used, Year of construction: 2011, operating hours: 48,000 h, machine/vehicle number: IntNr231180, DMG Gildemeister CNC Multi-Slide Automatic Turning Machine MSL 60/7 Year of manufacture: 2011 Machine on-time: 56,000 hours Automatic cycle hours: 48,000 hours CNC control: FANUC 31i – Model A, 7 axes Technical specifications - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 60 mm - Spindle speed: 5,000 rpm - Spindle drive power: 7.5 kW COUNTER SPINDLE (on turret) - Max. bar diameter: 42 / (60) mm - Spindle speed: 5,000 rpm - Spindle drive power: 3.7 kW Driven tools (turret): - Tool drive power: 3.7 kW - Max. speed: 6,000 rpm Back-side machining: - 4 fixed tool stations - Capacity for up to 14 tools possible Bar feeder: FMB Turbo 5-55 / 3200 / A Year of manufacture: 2008 Bar diameter: 5 – 55 mm Bar length: 3,200 mm Chip conveyor included Hsdpfs Ahfbaex Airew Machine can be inspected under power by appointment. Technical data, details, and prior sale subject to change and error.

Condition: used, Year of construction: 2017, operating hours: 13,700 h, machine/vehicle number: IntNr231667, A CNC vertical turning center, TRAUB TNL 12, manufactured in 2017, equipped with a TRAUB TX8i-s control system and comprehensive peripherals, is for sale. The machine comes from the medical technology sector and is in exceptionally well-maintained condition, both visually and technically. General technical data Manufacturer: INDEX-Werke GmbH & Co. KG (TRAUB) Model: TNL 12 Year of manufacture: 2017 Control system: TRAUB SYSTEM TX8i-s CNC axes: 11 axes Max. bar diameter: 13 mm Max. turning length: 130 mm Operating hours (recorded) Control system ON: 22,868 h Production time: 13,620 h Spindle running time: 9,945 h Main spindle Max. speed: 12,000 rpm Drive power: 2.5 / 4.0 kW (100% / 25% duty cycle) C-axis resolution: 0.001° Counter spindle Max. speed: 12,000 rpm Drive power: 2.5 / 4.0 kW (100% / 25% duty cycle) C-axis resolution: 0.001° Tool carrier / Machining Tool turret: 2 turrets Tool stations: 6 stations each Powered tools: on all turret stations Tool drive (turret): Up to 8,000 rpm Tool drive power: 1.5 kW (25% duty cycle) Front machining unit: 4 tool stations Rear machining unit: 4 tool stations Simultaneous machining: Depends on the number of tool carriers Equipment and peripherals Bar feeder: FMB minimag 20 CO₂ extinguishing system: Kraft & Bauer FB 703 Coolant treatment: RESY compact belt filter system Oil mist extraction: NOVA, mounted on the machine Electrical connection data Voltage: 400 V / 50 Hz / 3-phase Hjde Ahfaropfx Airjw Connected power: 16 kW / 19 kVA Rated current: 27 A The machine can be inspected by appointment. Subject to changes and errors in technical data and specifications as well as prior sale!

Condition: used, Year of construction: 2004, operating hours: 18,848 h, machine/vehicle number: IntNr231666, A TORNOS DECO 20a CNC long-turning lathe, manufactured in 2004, is for sale, including an automatic bar feeder, TORNOS Robobar SBF 532. Operating hours (recorded): Control ON: 22,500 hours Production time: 18,848 hours Spindle running time: 13,450 hours Technical data Manufacturer: TORNOS Hsdpfx Ae Ahfanoirjw Model: DECO 20a Machine type: CNC long-turning lathe Year of manufacture: 2004 Control system: TORNOS PNC-DECO / FANUC Programming system: TORNOS TB-DECO Number of CNC axes: 10 Machining concept: Multi-channel simultaneous machining Main spindle Maximum bar diameter: 20 mm Maximum workpiece length per clamping: 200 mm Spindle speed: 100–10,000 rpm Spindle indexing: 0.1° C-axis Counter spindle Maximum diameter: 20 mm Speed range: 100–10,000 rpm Automatic workpiece transfer C-axis counter spindle Tooling and machining system Independent CNC tool slides Linearly arranged tool stations Use of fixed and driven tools 4 + 2 positions for transverse drilling and milling Driven tools with speeds up to 8,000 rpm Front machining unit for axial machining Accessories: Bar feeder – TORNOS Robobar SBF 532 Fire extinguishing system, Kraft und Bauer FB 703 1 comprehensive set of tool holders 1 set of collets 1 set of guide bushings Oil mist extraction unit Unit for extra-long parts OLAER chiller Coolant used: Oil Dimensions and weight TORNOS DECO 20a: - Length: 2,270 mm - Width: 1,650 mm - Height: 2,200 mm - Machine weight: 3,500 kg TORNOS Robobar SBF 532 bar feeder: - Length: 4,570 mm - Width: 950 mm - Height: 1,500 mm - Weight: 720 kg The machine can be inspected by appointment. Subject to changes, errors in technical data and information, and prior sale!

Condition: used, Year of construction: 2004, operating hours: 20,141 h, machine/vehicle number: IntNr231669, For sale is a CNC turning center TORNOS DECO 20a, built in 2004, including an automatic bar feeder TORNOS Robobar SBF 532. Operating hours (recorded) Control system ON: 23,500 h Production time: 20,141 h Spindle running time: 14,350 h Technical data Manufacturer: TORNOS Model: DECO 20a Machine type: CNC turning center Year of manufacture: 2004 Control system: TORNOS PNC-DECO / FANUC Programming system: TORNOS TB-DECO Number of CNC axes: 10 Machining concept: Multi-channel simultaneous machining Hsdpfx Ae Ahfakoirjw Main spindle Maximum bar diameter: 20 mm Maximum workpiece length per clamping: 200 mm Spindle speed: 100–10,000 rpm Spindle indexing: 0.1° C-axis Counter spindle Maximum diameter: 20 mm Speed range: 100–10,000 rpm Automatic workpiece transfer C-axis counter spindle Tool and machining system Independent CNC tool slides Linearly arranged tool stations Use of fixed and driven tools 4 + 2 positions for cross-drilling and cross-milling Driven tools with speeds up to 8,000 rpm Front machining unit for axial machining Accessories: Bar feeder – TORNOS Robobar SBF 532 Fire extinguishing system Kraft und Bauer FB 703 1 comprehensive set of tool holders 1 set of collets 1 set of guide bushings Oil mist extraction unit Unit for extra-long parts Coolant: Oil Dimensions and weight TORNOS DECO 20a: - Length: 2,270 mm - Width: 1,650 mm - Height: 2,200 mm - Machine weight: 3,500 kg TORNOS Robobar SBF 532 bar feeder: - Length: 4,570 mm - Width: 950 mm - Height: 1,500 mm - Weight: 720 kg The machine can be inspected by appointment. Subject to changes, errors and prior sale!

Condition: ready for operation (used), Year of construction: 1973, travel distance X-axis: 850 mm, travel distance Z-axis: 2,900 mm, controller manufacturer: SIEMENS, number of axes: 2, Turn-mill centre manufactured in 1973. This MAX MULLER 3000 / Norma 2900 x 850 features a turning length between centers of approximately 2850 mm and a faceplate diameter of Ø 630 mm. It is equipped with a SIEMENS CNC Control and has a drive power of 32 kW. If you are looking to get high-quality turning capabilities, consider the MAX MULLER 3000 / Norma 2900 x 850 machine we have for sale. Contact us for further details. - Turning Length between Centers: Approx. 2850 mm- Faceplate Diameter: Ø 630 mm- Drive Power: 32 kW- Operating Hours: Approx. 60,000h - 70,000h (mathematically calculated after 1998 retrofit)- Control Unit: SIEMENS CNC Control- Additional Accessories / Scope of Delivery: Complete machine, 1x hydraulic steady rest (Ø 50 mm - Ø 150 mm), faceplate Technical Specification Counter Spindle No Hedpfx Aij Adp Tversw Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2015, operating hours: 6,872 h, spindle motor power: 7,500 W, spindle speed (max.): 7,000 rpm, overall weight: 4,300 kg, total width: 1,440 mm, total height: 1,865 mm, bar diameter (max.): 65 mm, controller manufacturer: FANUC, controller model: Series 31i-MODEL B5, product length (max.): 3,320 mm, number of axes: 11, This 11s STAR MICRONICS SV-38R type B was manufactured in 2015. It features a maximum turning diameter of 38 mm and a maximum headstock stroke of 350 mm. The machine is equipped with a FANUC Series 31i-MODEL B5 CNC control and offers rapid traverse speeds of up to 30 m/min. If you are looking to get high-quality turning capabilities, consider the STAR MICRONICS SV-38R type B swiss-type CNC sliding-headstock automatic lathe we have for sale. Contact us for further details. • Axis diagram: X1, Y1, Z1, X2, Y2, Z2, X3, Y3, Z3, B3, C1, C2 • Machining capacity: • Max turning diameter: 38 mm • Max headstock stroke: 350 mm • Rapid traverse: X1/X2/X3/Y1/Z1/Z2/Z3 30 m/min; Y2 20 m/min; Y3 15 m/min • Main spindle: • C-axis control • Motor power: 7.5 kW continuous / 11 kW (10 min, 25% duty) • Main spindle collet • Synchronous rotary guide bush with air blow • Sub-spindle: • Max speed: 7,000 rpm • C-axis control • Motor power: 5.5 kW continuous / 7.5 kW (10 min, 40% duty) • Sub-spindle collet • Air blow • Tooling system: • 5-position gang tool post • 10-position tool turret • 8-spindle back-working unit • Front drilling: 3 tools per station • Max drilling diameter: 23 mm • Max tapping capacity: M16 × 2.0 • Driven tooling: • Gang tool post: 4 driven positions; max speed 6,000 rpm; motor 2.2 kW • Turret: 2 driven tools per station; max speed 5,700 rpm; motor 2.7 kW continuous / 4 kW (5 min, 30% duty) • Max drilling diameter (driven): 10 mm • Max tapping capacity (driven): M8 × 1.25 • Built-in/standard equipment: • Cut-off tool breakage detection • Automatic central lubrication • Hydraulic unit • Pneumatic unit • Coolant level indicator • Leak detection switch • Work area lighting • RS-232C interface • Operating hours and counters: • Power-on: 24,295 h 59 min • Operating: 21,038 h 55 min 37 sec • Cutting: 6,872 h 30 min 44 sec Additional equipment • Bar feeder: FMB Maschinenbau, model FMB turbo 5-55 / 3200 A (Year 2016) Hsdpo Agmnzjfx Airjw • Max bar length: 3,200 mm • Bar diameter range per supplied spec: 5–65 mm (to be confirmed with feeder documentation) • Feed speed: 0–1,000 mm/s; Return speed: 0–1,000 mm/s • Bar feeder interface • Note: Actual machining diameter limited by lathe to 38 mm • Finished parts conveyor Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: like new (used), Year of construction: 2023, operating hours: 68 h, Struers Discotom-100 – 2023 – only 68 operating hours – Struers warranty Hjdpfx Aiezx Hq Derew For sale: Struers Discotom-100, a professional, automatic laboratory cutting machine designed for the precise preparation of samples for metallographic analysis. The unit is from 2023 and is in very good condition. The machine has been used very little – the counter shows only 68 total operating hours. Key features: * Manufacturer: Struers * Model: Discotom-100 * Year of manufacture: 2023 * Operating hours: only 68 * Condition: very good, practically unused * Warranty: 12 months Struers warranty * Automatic, programmable cutting * Control of feed and sample positioning * Movable X/Y work table * Large working chamber for cutting larger and irregular parts * Adjustable blade rotation speed * Cooling system during cutting * Enclosed working chamber cover with a large window * Clear control panel * Designed for the precise cutting of metals and other materials before further metallographic preparation The Discotom-100 is a high-quality device used in quality control laboratories, materials laboratories, R&D departments, and in the metallurgical, automotive, and manufacturing industries. A major advantage of the offered unit is its very low operating hours – only 68 – and the one-year Struers warranty, which makes it an attractive alternative to purchasing a new machine. Delivery possible in January 2027.

Condition: used, Year of construction: 2005, machine/vehicle number: IntNr231668, A CNC vertical turning centre, TRAUB TNL 12, manufactured in 2005, equipped with a TRAUB TX8i-s control system and extensive peripherals, is for sale. This machine originates from the medical technology sector and is in exceptionally well-maintained condition, both visually and technically. General Technical Data Manufacturer: INDEX-Werke GmbH & Co. KG (TRAUB) Model: TNL 12 Year of Manufacture: 2005 Control System: TRAUB SYSTEM TX8i-s CNC Axes: 11 axes Max. Bar Diameter: 13 mm Max. Turning Length: 130 mm Operating Hours (Recorded) Control ON: 38,120 h Production Time: 22,345 h Spindle Run Time: 15,543 h Main Spindle Max. Speed: 12,000 rpm Drive Power: 2.5 / 4.0 kW (100% / 25% duty cycle) C-Axis Resolution: 0.001° Counter Spindle Max. Speed: 12,000 rpm Drive Power: 2.5 / 4.0 kW (100% / 25% duty cycle) C-Axis Resolution: 0.001° Tool Carrier / Machining Tool Turret: 2 turrets Tool Stations: 6 stations each Powered Tools: on all turret stations Tool Drive (Turret): Up to 8,000 rpm Drive Power (Tool Drive): 1.5 kW (25% duty cycle) Front Machining Unit: 4 tool stations Rear Machining Unit: 4 tool stations Simultaneous Machining: Depends on the number of tool carriers Equipment and Peripherals Bar Feeder Magazine: FMB minimag 20 CO₂ Extinguishing System: Kraft & Bauer FB 703 Coolant Treatment: RESY compact belt filter system Oil Mist Extraction: NOVA, mounted on the machine Electrical Connection Values Voltage: 400 V / 50 Hz / 3-phase Connected Load: 16 kW / 19 kVA Rated Current: 27 A Hjdpfx Ae Ahfaveirew The machine can be inspected by appointment. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: ready for operation (used), Year of construction: 2016, operating hours: 28,151 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 210 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 810 mm, controller manufacturer: FANUC, controller model: F31iB with Celos, number of slots in tool magazine: 32, number of axes: 6, This 6-axis DMG MORI NZX 2000/800SY was manufactured in 2016. It features a maximum turning diameter of 320 mm and a swing over bed of 800 mm. The machine is equipped with dual turrets, each with 16 stations, and offers high-speed canned cycle capabilities. If you are looking to get high-quality turning capabilities, consider the DMG MORI NZX 2000/800SY horizontal turning machine we have for sale. Contact us for further details. • Number of turrets: 2 • Number of tool slots: 2 x 16 stations • Main electronic connection: Transformer 95 kVA • Chip conveyor: Yes • 4 x angel live tools will follow • 6 x straight live tool holder will follow • 2 x angel C4 Capto live tool holder will follow Hjdpfx Aijzkrqysrsw • 10 x capto fix tool holders will follow • Possible to buy also robot solution • Well maintained • Only running stainless steel since day one • Chuch high/low pressure both spindles • Spindle 2 tailstock spec • 7 MPa high pressure Knoll system • Coolant gun • Coolant float switch • Chuck top coolant both spindles • Airblow for tool tip both turrets • Airblow for chuck spindle 1 • Oil skimmer • Autodoor • Robot IF • Ethernet IF • Safety fence IF • Barfeeder IF • 10 external M codes • Handwheel • Spindle orientation both spindles • Text engraving function • High Speed canned cycle • Program restart • Island open pockets • 1 mB storage • Additional workpiece coordinate 48 sets • Tool offsets 200 sets • Swing over bed = 800 mm • Swing over cross slide 800 mm • Maximum distance between nose 1130 mm • Max turning diameter 320 mm Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2013, operating hours: 33,559 h, spindle speed (max.): 7,000 rpm, overall weight: 9,800 kg, CNC Lathe Manufacturer: DMG MORI Type: SPRINT 50 3T+B Year of manufacture: 2013 Technical details: Spindle speed: 7,000 rpm Number of tool stations: 3 x 12 Machine weight: approx. 9.8 t Spindle hours: approx. 48,437 h Operating hours: approx. 33,559 h Condition: used Available from December 2026 Technical features & accessories: - 2 cross slides - 3 turrets with 12 stations each (all driven) - Main and counter-spindle - 2 C-axes - Y-axis on slides 1 and 2 - Chip conveyor - Workpiece unloading system - Differential pressure clamping system for counter-spindle - Z-Y axis for slide 5 - Emulsion cooling system - Conveyor belt for finished workpieces (external to the machine) - Electrical and software interface for oil mist extraction system - B-axis Accessories, tools, and clamping devices shown are included in the scope of delivery Hodpfx Aie Advfrjrew only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: ready for operation (used), Year of construction: 1995, bar diameter (max.): 16 mm, controller manufacturer: FANUC, controller model: Series 0-TT, number of axes: 5, Swiss type turning machine manufactured in 1995. This Star RNC16B-1 features a belt-driven spindle motor and is equipped with a flexible coolant system for enhanced performance. If you are looking to get high-quality turning capabilities, consider the Star RNC16B-1 machine we have for sale. Contact us for further details. - Sub-Spindle / Counter Spindle: Equipped with synchronized pick-up sub-spindle for back working- Sub-Spindle Controls: Front panel dedicated sub-spindle control switches (ON/OFF, COLLET OPEN/CLOSE)- Back Working Attachment: Multi-station back-working block mounted opposite the counter spindle- Main Spindle Max Bar Capacity: 16 mm (5/8")- Controller: FANUC Series O-TT (Dual-path CNC control for simultaneous main and sub-spindle operations)- Tooling Configuration: Gang-type slide tooling plus back-end working station- Coolant System: Multi-point articulated coolant delivery hoses with integrated tray and recovery basin- Drive System: Independent electric belt-driven spindle drive motor Hjdpfx Ais Aggfxjrow Technical Specification Counter Spindle Yes

Condition: like new (used), mileage: 60 km, power: 107 kW (145.48 HP), first registration: 08/2026, fuel type: diesel, overall weight: 3,500 kg, emission class: euro6, loading space length: 3,700 mm, loading space width: 2,200 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, airbag, all-season tires, cruise control, soot filter, Sales vehicle with an empty body. Internal dimensions: 3700mm x 2200mm x 2300mm (L x W x H). 1 sales counter on the right. 1 rear door. Plastic cast floor, molded in a tub shape. Hedpfx Aoxxi Raeirow Further interior and exterior fittings can be optionally provided by us. References can be found on our website. Leasing or financing options available through us! (Germany / Austria) Delivery possible for an extra charge (Switzerland and Austria). Telephone inquiries will be given priority. Available for immediate delivery!

Condition: ready for operation (used), Year of construction: 1996, operating hours: 5,736 h, travel distance X-axis: 100 mm, travel distance Z-axis: 290 mm, overall weight: 2,600 kg, controller manufacturer: MAZATROL, controller model: T PLUS, number of slots in tool magazine: 8, number of axes: 2, CNC Lathe manufactured in 1996. This Mazak Quick Turn 10 features a maximum turning diameter of 160 mm and a turning length of 256 mm. It is equipped with a robust 8-station drum turret and a main spindle speed of up to 6,000 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn 10 machine we have for sale. Contact us for further details. Hedpfx Aie Agvl Tjrjw - Model Designation: Quick Turn 10 (Nameplate: QTN-10)- Year of Construction: 1996- Control Unit: Mazak MAZATROL T PLUS- Total Operating Hours (Gesamt / Betr. Zeit): 26,800 h 00 m 35 s- Automatic Machining Hours (Aut. Zers.): 9,151 h 11 m 30 s- Automatic Cycle Time (Aut. Abla.): 9,369 h 25 m 11 s- Pure Cutting Time (Rei. Zers.): 5,736 h 15 m 38 s- Max. Turning Diameter: 160 mm- Circumferential / Swing Diameter: 300 mm- Turning Length: 256 mm (Z-travel 290 mm)- Tool Turret: 1 Turret, 8-station drum turret- Tool Clamping: Block holder, shank 20 x 20 mm- Main Spindle Speed: Up to 6,000 rpm- Spindle Nose: A2-5- Spindle Bore: 50 mm- Drive Power: 7.5 kW- Bar Capacity: Ø 42 mm (Standard chuck 6" / 165 mm)- Tailstock: None visible / to be confirmed on inspection (optional MK 4) Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), For sale: Professional KLN Ultraschall / MECASONIC OMEGA 3 MCA ultrasonic welding machine – an industrial system for precision joining of plastics. The device is designed for use in: - Serial production - Automotive industry - Electronics and medical sectors - Welding plastic components (e.g. housings, blisters) ⚙️ Specification: Manufacturer: KLN Ultraschall (Crest Group) / MECASONIC Hedpfx Ajz Smn Njirjw Model: OMEGA 3 MCA Type: Ultrasonic welding system Year of tooling production: 2011 Control: MCA digital control panel Cycle counter: approx. 23,000 Two-hand safety start system (operator safety) Industrial power supply 📦 Included in the set: - Complete welding unit - MECASONIC MCA controller - Work table with tooling (mould / fixture – "Blister") - Pneumatic installation (visible in the photos) - Cabling 📊 Condition: - Used device - Visually in very good condition - Normal signs of use (as seen in the photos) - Machine powers up – control panel operates - No complete production testing performed 📄 Additional information: - Cycle counter visible on display - Safety instructions (DE) on the housing - Robust industrial construction ✅ Advantages: - High welding precision - Fast process (ultrasonic) - Reliable industrial technology - Ready for integration or standalone operation - Reputable manufacturers (KLN / MECASONIC) 🚚 Shipping: - Pallet shipping - Personal collection possible - International shipping available

Condition: ready for operation (used), Year of construction: 1991, bar diameter (max.): 16 mm, controller manufacturer: FANUC, controller model: Series 0-TT, number of axes: 5, Swiss type turning machine manufactured in 1991. This Star RNC-16B features a FANUC Series 0-TT CNC control unit and includes an automatic magazine bar feeder. It is equipped with a sub-spindle, pick-off unit, and back working station for enhanced productivity. If you are looking to get high-quality turning capabilities, consider the Star RNC-16B machine we have for sale. Contact us for further details. - 2 Units available- CNC Control Unit: FANUC Series 0-TT- Type: CNC Automatic Lathe / Swiss Type Lathe- Counter Spindle / Sub-Spindle: Yes (sub-spindle controls & pick-off unit present)- Maximum Bar / Machining Diameter: 16 mm (5/8")- Tooling Stations / Attachments: 3-spindle drilling/endworking attachment, back-working station, flexible coolant delivery lines Technical Specification Counter Spindle Yes Hsdo Aggknopfx Airew

Condition: used, For Sale: Konica Minolta AccurioPrint C3070L We are offering a Konica Minolta AccurioPrint C3070L in good working condition. Machine details: Model: AccurioPrint C3070L Total counter: 363,000 prints Available options: IC-417, FS-612, LU-202 Hjdpfx Aj Afyxlsirew The machine is a great option for professional printing businesses looking for a reliable production printing solution. If you are interested or need any additional information, photos, or further technical details, please feel free to contact me.

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm Weinig Unicontrol 6 For sale on behalf of a customer, to be collected from site Machine can be viewed whilst still in operation Includes tools IV 77, IV 68; see PDF attachments ----- Technical Data Summary (please enquire about any additional accessories that may be included) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, horizontally infinitely adjustable > Number of tools: 1 > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment beam for identifying the cut section > NC length stop, mounted on slotted table, included Positioning of the crosscut saw integrated into the control system. > Length 3,500 mm Item 2: Tenoning and slotting spindle ----- > Number of tools: 3/4 (pneumatic stroke) > Tool clamping length: 320 mm > Vertical spindle stroke: > Spindle speed: 3,500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (synchronous spindle and counter-rotating spindle) ----- > Position: vertical, right > Number of tools: 1 > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- ----- > Position: vertical, right > Number of tools: 3/4 (pneumatic stroke) > Tool clamping length: 320 mm > Vertical spindle stroke: > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Maximum tool swing: 232 mm > Motor power: 11 kW Pos. 5: Horizontal top profiling milling unit ----- > Clamping length: 40 mm > Number of tools: 2 > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool swing diameter: 130 mm > Axial travel: 2 positions Hjdpfe Agphgsx Airew > Radial travel: 2 positions Item 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical, right > Number of tools: 3 > Tool clamping length: 160 mm > Axial adjustment range: 3 positions > Radial adjustment range: 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool swing radius: 210 mm > Motor power: 3.0 kW Further features ----- > Online-capable > Beveling device for tear-free beveling > Double-part package > Return conveyor for single-operator use: vane conveyor > On-screen control > Bevel window device > Electronic angle display for bevel window > Electric feed height adjustment > Industrial PC, PC control/NEXUS ----- Price of the above machine available on request! ----- Should the technical specifications of this machine not meet your requirements, please do not hesitate to contact us. Our team, with many years of experience, will be happy to assist you with any necessary adjustments or in finding a machine that meets your requirements! ----- (Technical data as provided by the manufacturer – subject to change without notice!)

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: 604374, functionality: fully functional, operating hours: 10 h, power: 5.5 kW (7.48 HP), cutting height (max.): 150 mm, cutting width (max.): 1,350 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 46 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, Equipment: CE marking, documentation/manual, saw blade guard, scorer, MARTIN T66 Panel Saw – Showroom Machine, Year of Manufacture 2025, for Sale Technical Data Machine Type: Panel saw with pivoting saw blade Manufacturer / Model: MARTIN T66 Motor Power: 5.5 kW (main motor) Speed: Continuously adjustable from 1,000 to 6,000 rpm Cutting height at 90° (with saw blade Ø 450 mm): max. 155 mm Cutting height at 46° (with saw blade Ø 450 mm): max. 110 mm Saw blade diameter: 250 – 450 mm (bore Ø 30 mm) Saw blade swivel range: 0° – 46° Rip fence length (cutting length): 3,000 mm Sliding table: Smooth-running, hard-anodized aluminum guide, wear-resistant, self-cleaning, with replaceable cutting edge Cast iron work table: 850×1,100 mm, work height 900 mm Cutting width: 1,350 mm Length stop: Aluminum design, continuous, with error-free fine adjustment and fold-out stop extensions for angle cuts up to 2,000 mm Cross table: Steel, galvanized, with integrated fixed positions for common woodworking angles (0°, 22.5°, 30°, 45°) Net weight: approx. 1,100 – 1,400 kg Dust extraction: Connection Ø 100 mm (on the upper guard) and Ø 120 mm (in the machine stand), minimum flow rate 21 m³/min at 800 Pa Machine Configuration & Equipment Hjdpfx As Agnp Eeirjw Control: Ergonomic control panel at eye level with a 7.0" touchscreen (ConnectTouch) in 16:9 format; electronically controlled cutting height and cutting angle, USB interface, operating hour counter, machine diagnostics Scoring unit: Electrically adjustable 2-axis scoring unit (motor 0.75 kW, 11,500 rpm, saw blade Ø 120 mm, bore Ø 22 mm), pneumatically retractable/extendable, with ProLock quick-change system Safety lighting: Scoring unit lighting SafeLight (optical marking of the danger zone during operation) Parallel fence: Manually adjustable via handwheel with digital display of cutting width on the screen, guide on 4 radial ball bearings, dual-purpose fence ruler (upright or flat) Tool change: ProLock quick-change system for the main saw blade Electricals & Safety: CE-compliant, electronic braking system, dust extraction control, motor protection, undervoltage release, 2 emergency stop buttons, lockable main switch, voltage 3~/400 V / 50 Hz New price: approx. €32,000.00

Condition: ready for operation (used), Year of construction: 2013, spindle speed (max.): 10,000 rpm, travel distance X-axis: 108 mm, travel distance Y-axis: 104 mm, travel distance Z-axis: 140 mm, spindle motor power: 3,700 W, total height: 1,597 mm, total width: 837 mm, overall weight: 1,150 kg, controller manufacturer: FANUC, product length (max.): 1,622 mm, number of axes: 4, This 4-axis Citizen Cincom B16 was manufactured in 2013. It features a maximum machining diameter of Ø16 mm and a maximum machining length of 135 mm. The machine includes a main spindle speed range of 200–10,000 rpm and a counter spindle with a maximum chucking diameter of Ø16 mm. If you are looking to get high-quality turning capabilities, consider the Citizen Cincom B16 horizontal turning machine we have for sale. Contact us for further details. Machining capacity • Maximum machining diameter: Ø16 mm • Maximum machining length: 135 mm • Main spindle through-hole diameter: Ø20 mm • Maximum front drilling diameter: Ø6 mm • Maximum front tapping: M6Travels • A2/back-spindle axis travel: 200 mmRapid feeds • X-axis: 21 m/min • Y-axis: 21 m/min • Z-axis: 15 m/min • A2-axis: 15 m/minMain spindle • Speed range: 200–10,000 rpm • Maximum speed with rotary guide bushing: 8,000 rpm • Motor: 2.2 / 3.7 kWCounter spindle (back spindle) • Maximum chucking diameter: Ø16 mm • Speed range: 100–6,000 rpm • Maximum drilling diameter: Ø5 mm • Maximum tapping: M3 • Motor power: 1.0 kWDriven tooling • Maximum drilling diameter: Ø5 mm • Maximum tapping: M4 • Tool spindle speed: 100–4,500 rpm • Drive motor: 0.5 kWTooling • Total mountable tools: 15 • Cutting tools: 5 • Secondary machining tools: 2 • Front drilling tools: 4 • Back drilling tools: 4General • Input power capacity: 5.2 kVAUnits available and hours • Unit 1 • Manufacture date: 05/2013 • Power On: approx. 82,600 h • Run Time: approx. 31,847 h • Cutting Time: approx. 22,613 h • Unit 2 • Manufacture date: 06/2013 • Power On: approx. 81,474 h • Run Time: approx. 31,403 h • Cutting Time: approx. 20,127 h Additional equipment Hodpfj Afxqqjx Airjw • Bar feeder: FMB Minimag 20 / 3200 C • Unit 1 bar feeder year: 2014 • Unit 2 bar feeder year: 2013 Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 565 mm, spindle motor power: 22,000 W, total height: 2,300 mm, total width: 2,100 mm, overall weight: 6,000 kg, product length (max.): 3,900 mm, number of axes: 3, This 3-axis Okuma LB3000 EX was manufactured in 2008. It features a maximum turning diameter of 340 mm and a distance between centers of 1020 mm. The machine is equipped with a powerful OSP-P200 control system and offers a spindle speed range of 45–5000 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LB3000 EX horizontal turning machine we have for sale. Contact us for further details. • Control system OSP-P200 • 12-station tool turret radial • Revolver 12 driven tools • Number of revolvers 1 • Tool holder BMT 60 • Number of tools 12 • Number of tools available approx. 200 • Driven tool stations power 7.1 kW • Driven tool torque 40.4 Nm • Driven tool speed range 45–6000 rpm • C-axis included • Sub-spindle with W-axis • Main spindle bore 110 mm • Spindle bore 80 mm • Spindle nose A2-11 • Spindle speed range 28–2800 rpm • Spindle speed 45–5000 rpm • Main spindle drive 22/15 kW Hedpfx Aisy Aaxrerow • Power at 40% duty cycle 22 kW • Maximum turning diameter 340 mm • Distance between centers 1020 mm • Programmable chuck pressure (2 levels) • Thread milling interpolation X/Y and Z/Y axes • Workpiece catcher programmable • Chip conveyor with integrated coolant tank • Paper band filter system heavy-duty • Coolant tank capacity 480 l • Coolant pump 40 l/min at approx. 20 bar • Coolant pump type Brinkmann TH 90/690-FSI • Extraction connection diameter 200 mm • Hollow clamping cylinder bore 110 mm • Power chuck FORKARD QLC-KS 250-101 Z8 • Chuck bore 101 mm • Drawtube for spindle max. 100 mm • Collet chuck Hainbuch Axfix 100 • Clamping range 42–100 mm • Manual collet change device • Sub-spindle stroke 150 mm • Bar feeder interface • Short bar loader IRCO ILS RBK • Bar capacity diameter 5–100 mm • Spindle reduction tube diameter 90 mm length 1500 mm • Chip disposal conveyor PVC with PU coating • Hydraulic clamping cylinder bore 52 mm • Machine dimensions 3.9 m x 2.1 m x 2.3 m • Machine weight 4000–6000 kg • Maintenance contract yes • Utilization highOPTIONAL for an additional charge: Approx. 200 tools availableElectrical maintenance was carried out 1.5 years ago. During this work, some electrical components were replaced or cleaned Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 3,500 rpm, travel distance X-axis: 275 mm, travel distance Z-axis: 820 mm, spindle motor power: 22,000 W, total height: 2,330 mm, total width: 2,230 mm, overall weight: 7,500 kg, controller manufacturer: FANUC, controller model: Series 21i-T, product length (max.): 4,950 mm, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2000. This ZPS S-60 CNC features a maximum machining diameter of 430 mm and a maximum machining length of 750 mm. It offers X/Z-axis travel of 275/820 mm and a spindle speed range of 20 to 3,500 rpm. If you are looking to get high-quality turning capabilities, consider the ZPS S-60 CNC machine we have for sale. Contact us for further details. • Maximum swing over bed: 680 mm • Maximum machining diameter: 430 mm • Maximum machining length: 750 mm • Maximum bar capacity: 65 mm • Spindle bore: 80 mm • Turret: Duplomatic, 12 positions • Dimensions (L × W × H) excluding chip conveyor: 3,280 × 2,230 × 2,330 mm • Service/maintenance: Regularly serviced and maintained Additional equipment • Tool holders Hodpfx Ae Afm Utjirsw • Clamping jaws • Other accessories (unspecified) Technical Specification Taper Size VDI 50 Counter Spindle No Driven Tools No