Used Crea for sale (3,746)

Condition: new, Layout: Round bale grab Attachment suited for: Agricultural machines Folding Grass Fork The Folding Grass Difference is made to handle the increased output from a new generation of high capacity silage harvesters.It is produced as collapsible so that we can provide affordable transportation to all over the world. Height: 1845 mm Width Open: 4880mm Iedpfx Aaspa Rtxobjtn Width Closed: 2570mm Depth: 1850mm Weight: 1500kg Tine lenght: 1525mm Tine width: 50mm Hardox Number of bottom tines: 18 Tine Spacing: 227 Ram: 2x70mm Bore

Condition: new, Year of construction: 2025, Entry-level fiber laser metal sheet&tube cutting machine One machine with two uses. AT series cuts both metal sheets and metal tubes. The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Fast air cutting efficiency increases by 37% when cutting carbon steel. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Angle steel and channel steel cutting are standard with no need for additional installation. Condition: New Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 3048*1524mm Cutting Speed: 0-100m/min Ijdjhv U Uvopfx Aabetn Positioning accuracy: ±0.03mm Repositioning accuracy: ±0.02mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: good (used), MBO K800 S-KTL/6 Folding Machine + SBAP 46ME Press Paper format: 780x1200mm Maximum speed: 230m/min High stack feeding, FP-120 pallet feeder 6 cassettes on the first unit 2 pneumatic knives Itjdpfx Aasxmu Tvjbjn Retractable creasing and perforating tool unit Sound insulation on all units Control computer with Navigator touchscreen monitor MBO SBAP-46ME stacking press Spare parts in a convenient cabinet. The machine is in perfect condition and ready to work.

Year of construction: 2019, operating hours: 3,934 h, condition: ready for operation (used), Control Unit Brand HAAS Iedsxnd R Topfx Aabetn Model NGC Main Drive Spindle speed range 4000 Spindle motor power 14.9 kW14.9 kW Movement X-Axis Movement 213 mm Y-Axis Movement ±51 mm Z-Axis Movement 572 mm Media Chip conveyor Yes Additional Equipment ATP – Automatic tool probe Install Kit – Bar feeder installation kit with adapters for bar diameters 9–44 mm / Programmable, pneumatically operated finished part catcher (max. part dimensions: 108 mm x 54 mm, max. weight: 2.27 kg) CONVEYOR – Chip conveyor (belt type) LINER ADAPTER 2.00 – Haas liner adapter for spindle with bar diameter 2" (51 mm) HAAS Bar Feeder – Compatible with HAAS lathes (ST-10 to ST-35), for automatic bar feeding LT-6K-UP – Option to increase the speed of driven tools up to 6000 rpm PCAT – Pneumatic part catcher, programmable, for parts up to 96 mm x 152 mm PTS – Hydraulic tailstock This 3-axis HAAS ST-20Y was manufactured in 2019. A robust horizontal turning machine, it offers reliable performance for precision machining. Consider the opportunity to buy this HAAS ST-20Y horizontal turning machine. Contact us for more information. Application Types Turning

Condition: excellent (used), Catalog number: 7574 TECHNICAL DATA engine: three-cylinder liquid-cooled diesel ISEKI drive: hydrostatic 4×4 transmission: hydraulic power steering: yes two speeds: yes Isdpfx Aasv H Di Djbstn cutting method: rotary cutting unit: front cutting width: 1500 mm top discharge lighting comfortable, well-maintained cabin: heated total weight: 1560 kg – used mower, in very good condition Net price: 40,900 PLN Net price: 9,630 EUR depending on exchange rate 4.25 EUR (Prices may change with increased fluctuations)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, spindle speed (max.): 18,000 rpm, 5-Axis Machining Center Manufacturer: Hermle Model: C20U Year of Manufacture: 2008 Itodpfjxphurex Aabsn Control: Heidenhain iTNC-530 Power-on hours: approx. 35,000 h Program run time: approx. 14,500 h S/N: XXXXX Technical Specifications: ----- • Travel range X-Y-Z: 600 x 450 x 450 mm • C-axis: 360° • A-axis: +/-115° • Swivel rotary table Ø280 mm • Spindle: 18,000 rpm • Magazine: 30x HSK-A63 • Standard coolant system • Blowing air through spindle + blow-off device • 3D probe Renishaw • Blum laser for tool breakage detection and measurement • Electrical thermal compensation • Increased accuracy in X-Y-Z-A-C axes • Option: KinematicOpt • Chip tray Accessories: ----- • Documentation • Rinsing gun • Handwheel

Year of construction: 2020, condition: new, Selling price: € 1.000, US$ 1.059 Bucket volume: 2 m^3 Galen Group Heavy-Duty series of excavator buckets combines innovative design and advanced materials for the ultimate in job site productivity. Use the GALEN Buckets to tackle tough digging and material handling conditions with solid results. Iodpfxsn Tm U Ej Aabjtn *Bucket shape designed to improve the penetration. *Strategic placement of HARDOX450 wear material in the cutting edge, side cutter and bottom corner to reduce wear *Dual taper design provides enhanced heel clearance for less resistance and wear during digging *Improved construction reduces weight up to .10% for larger payloads. Moreover, it decreases fuel consumption. *We use our own production Ground Engaging Tools which name is Metalon. We use Hardox as a scrap. We get better performance in comparison with the local market.

Condition: excellent (used), Year of construction: 2001, Manufacturer: Engel Type: ES 650/125 HL Control: CC100 Year of Construction: 2001 Clamping force: 125 t Type: Horizontal Drive: Hydraulic Clamping unit Clamping force: 1250 kN Opening stroke: 600 mm Ejector force: 61 kN Ejector stroke: 150 mm Max. plate distance: 850 mm Minimum mold height: 250 mm Mold plates (HxV): 740 x 840 mm Max. mold size (HxV): 740 x 700 mm Bar clearance: 470 mm Injection unit (45 mm screw) Screw diameter: 45 mm L/D ratio: 20 Metering volume: 290 cm³ Screw speed: 290 min⁻¹ Plasticizing capacity: 35 g/s Injection flow rate: 180 cm³/s Injection volume: 251 cm³ Injection speed (specific): 134 cm³/s Injection pressure: 1520 bar Injection pressure (increased): 2040 bar Specific injection pressure: 1230 bar Nozzle stroke: 350 mm Nozzle force: 67 kN Heating capacity: 13.3 kW Number of heating zones: 5 Itodevytz Nspfx Aaben Drive Pump drive power: 22 kW Oil volume - main tank: 310 l Oil volume - additional tank: 110 l

Condition: excellent (used), Supply Voltage: 230V Line Current: 5A Connected Load: 1100VA HF Output Power: 1000 Watts Output Frequency: 35kHZ Isdpera Af Ijfx Aabotn Welding Power: 800 W/1000 W Application: Machines and systems for the highest welding quality Benefits: Reduced welding times increase productivity Time welding is possible Maximum repeatability

Condition: used, Year of construction: 2007, load capacity: 10,000 kg, For sale: C-hook coil lifting hook PFEIFER Condition: used, but technically sound and ready for work. Reliable lifting device from the German manufacturer PFEIFER Seil- und Hebetechnik, manufactured in 2007. Technical specifications: Lifting capacity: 10 t Design: C-hook coil lifter Manufacturer: PFEIFER, Germany Year of manufacture: 2007 Application: The device is designed for lifting and transporting heavy coils using overhead or gantry cranes. Typical areas of use: Metallurgy – lifting steel, aluminum, or other metal coils Paper industry – handling large paper rolls Logistics and warehousing – safe transport and storage of coils The C-shaped design allows for quick and convenient gripping of the coil by its core, ensuring stable weight distribution. This increases workplace safety and improves handling efficiency. If you have any questions, we will be happy to assist you. Ijdexhgvfopfx Aabjtn

Condition: new, functionality: fully functional, Year of construction: 2025, Powder Coating Booth + Manual Powder Coating Spray Gun Height: 250cm The number of filters is increased according to the project Advantages of the Paint Booth The use of paint booths offers many advantages to businesses High Paint Quality: Working in an environment protected from dust, dirt and other external factors results in a smoother and more aesthetic surface. Ijdpfev Nvkfjx Aabjtn Energy Efficiency: Modern paint booths have energy-saving features. This reduces costs and provides an environmentally friendly solution. Work Safety: Employee health is protected by expelling harmful gases and particles that may occur during paint applications. Compliance: Paint booths make it easy to meet industry quality standards.

Condition: good (used), Horizon BQ-270C Perfect Binder Machine in very good condition. Ready to use. Very low mileage. Manufacturer’s description: Professional binder for perfect paperback binding. This fully automatic binder features an exceptionally sturdy design and is equipped with a hot glue gun, making it effective even for small and very small quantities of book covers or pages. The Horizon BQ-270C is a single-jaw binder with automatic cover feeding, which, operated by a single person, delivers impeccably bound books of consistently high quality. Equipped with a core thickness scanner, it allows for on-demand binding. Binds books with a thickness of 0.5 to 50 mm and a spine length of 135 to 320 mm, with a maximum production rate of up to 500 books per hour. Factory-installed cutter with additional scoring knives. Maximum milling depth up to 3 mm. Itjdpfxexk U R Aj Aabon Automatic cover feeding via a suction drum with a secure, consistent alignment with the bound sheets. A factory-installed system creates 4-fold creases on the cover, which automatically adjusts for precise alignment.

Condition: new, Selling price: € 1.000, US$ 1.047 Bucket volume: 2.7 m^3 Shovel Bucket Iodpfx Aaopa Rn Ejbjtn Hydraulic face shovel bucket widely used in the extraction and loading of raw materials in quarries and open-pit mines environments for machines from 80 up to 500 tons. The bucket profile is optimized to achieve the best possible filling factor and shorter material loading and dump time to allow the customer-operator to move more tons per hour at the lowest cost. The convex back‐wall shape increases the potential payload volume and reduces material dump time by increasing productivity. The bucket is equipped with extremely high quality components and structural steels, with a complete and customized wear-resistant package to ensure absolute longevity, reduce maintenance costs and limit downtime. For detailed information, please contact us.

Condition: good (used), Year of construction: 2020, operating hours: 5,800 h, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,100 mm, torque: 1,146 Nm, controller manufacturer: Siemens, controller model: 840D SL, workpiece height (max.): 1,400 mm, workpiece weight (max.): 2,000 kg, rotational speed (max.): 8,000 rpm, Machine name / type: HELLER / H 8000 Operating hours: 5800 Year of construction: 2020 Control unit: Siemens 840D SL Itsdpfx Asu Urgbeabsn Spindle: EPC-Unit (8.000 1/min, 60 kW, 1146 Nm) Tool clamping system: SK 50 Tool magazine / places: Rack / 265 Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, KF 600, IKZ 70 bar, (work area flushing) Positioning range XYZ (mm): 1250 / 1200 / 1100 Pallet size (mm): 800 X 800 Workpiece clamping: mechanical Additonal options / Specifics: multi-spindle-head support (MSK); receiver for measuring probe (RENISHAW); fast drill fracture sensing (SBBK); interface exhaust system; screen blow-off device for operator door; codechip; Chip conveyor function check; Integrated process monitoring (IPM) + Monitoring function to minimize machine damage in case of collision; 3 colour status lamp; increased tool weight 35kg; scraping conveyor for wet machining; Coolant temperature control; Feed force display; Tangential control;

Condition: excellent (used), functionality: fully functional, mileage: 38,503 km, power: 105 kW (142.76 HP), fuel type: diesel, gearing type: mechanical, wheelbase: 3,665 mm, overall weight: 3,500 kg, empty load weight: 2,535 kg, maximum load weight: 965 kg, first registration: 11/2020, next inspection (TÜV): 09/2026, emission class: euro6, color: silver, number of seats: 3, number of previous owners: 1, machine/vehicle number: SLS8400, Equipment: ABS, additional headlights, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, power assisted steering, second-hand vehicle warranty, sliding door, soot filter, tail-lift, truck registration, 229L Stuttgart 9775 Paint colour Iridium Silver MB 9775 A50 Front axle with increased load capacity AI1 Control code rear axle, crown gear 215 AR2 Axle ratio I = 3.923 BH6 Control code hydro aggregate variant 5 BK1 Control code wheel brake configuration 1 C6L Multifunction steering wheel C907 SERIES 907 TRANSPORTER VS30 CB8 Stabilisation Level II CL1 Steering wheel adjustable in tilt and height CW2 Omission of vehicle lowering D03 High roof D50 Continuous partition E1D Digital radio (DAB) E1E Navigation E1G Live Traffic capability E1U USB socket 5 V E2I Auxiliary battery for retrofit consumers, interior E2N Control Pro-Features in NTG6 E36 Separation relay for additional battery E3J Pre-installation switch panel E3M MBUX multimedia system with 7-inch touchscreen F3F Passenger-optimized shift console F68 Heated and electrically adjustable exterior mirrors F907 SERIES 907 TRANSPORTER VS30 FKA Panel van FR8 Reversing camera GD8 6-speed manual transmission ECO Gear H20 All-round heat-insulating glass HH9 Semi-automatic climate control Tempmatic HI1 Climate zone 1 (cold/comfort) IC1 Series C907/C910 Sprinter IE0 Series C907 VS30 RWD IG4 Standard IL5 Left-hand drive IL6 Metallic paint IR4 Wheelbase 3665 mm (BM-forming code) IT4 3.5 tonner J10 Tachometer km/h J58 Belt warning system for driver's seat J65 Outside temperature display JA8 Crosswind Assist JG0 Gearshift indicator JH3 Communication module (LTE) for digital services JI7 Initial running distance maintenance interval 60,000 km K13 Main tank 71 litres KP6 Emission control SCR Generation 3 LA2 Headlamp assistant LB5 Third brake light LC2 LED light strip in load compartment M40 Alternator 14V/200A MI2 Engine OM651 DE 22 LA 105 kW (143 hp) MJ8 ECO start/stop function MP6 Engine version Euro VI MQ0 OBD (On-board diagnostics) Level D OH2 HU Freshup 2 PH1 Master code tail lift Bär Cargolift Q11 Longitudinal member reinforcement RH2 Tyres 235/65 R16 C RX5 Wheel brand Maxion Wheels S22 Armrest for driver's seat, ISO-fix (child seat attachment system) S23 Dual passenger seat SA5 Driver airbag SB1 Comfort driver's seat SK2 Seat occupancy detection driver's seat T16 Sliding door right T77 Grab handle, load compartment sliding door at partition T86 Grab handle on rear right corner pillar V42 Lashing rails side wall at belt rail V43 Wooden floor V85 Smoker package V94 Cable duct on side wall V95 Cable duct at rear portal VA2 Interior panelling load compartment to roof height (wood) VF7 Fabric Maturin black W54 Rear doors, twin-leaf, 270 degrees XG7 Without uprating/downrating 3500 kg XM1 Noise reduction XM4 Acoustic package XV1 Reference weight at least 2381 kg required YK4 Tie-down straps for lashing rails Z1N Approval N1 Z2E Country version EU-EFTA-UK Z4V Production Düsseldorf Z7K Fleet Comfort Package Z7L Fleet Load Compartment Package Itjdpfxsw R Rxqo Aabjn ZM0 Panel van

Condition: used, Year of construction: 2018, Used machine Year of manufacture 2018 Basic equipment Electric height and tilt adjustment 0-46° with automatic cutting height correction when tilting Control at eye level, pivoting Double sliding table, table length 3,000 mm Parallel stop, manually adjustable via scale, including manual fine adjustment Cutting width 1,000 mm Angle stop with fixed 90° position, manually adjustable via scale up to 3,200 mm Max. sawblade projection 150 mm Max. sawblade diameter 450 mm Drive power 4 kW (5.5 HP) at 4,000 rpm AKE tool clamping system for the main sawblade Working height 91 cm Productivity package Motor 5.5 kW (7.5 HP) with VARIO F45 - Continuously variable speed control from 2000 - 6000 rpm - Precise speed adjustment to the material increases cutting quality and sawblade service life. Extended cutting height for one-sided tilting Itedpfjxppv Rex Aabon This option is equipped with a large extraction hood for a max. sawblade diameter of 550 mm and a max. sawblade projection of 204 mm for one-sided tilting. In combination with a scoring unit, the max. sawblade diameter is 500 mm or 179 mm cutting height. Only in conjunction with a minimum drive power of 5.5 kW (7.5 HP). Two-sided tilting! RAPIDO Plus 3-Axis Scoring Unit With electric height and lateral adjustment, programmable scoring blade height with quick lowering and quick raising, drive motor 0.75 kW (1 HP), 8200 rpm. Retrofitting only possible on machines prepared for a scoring unit. LED Lighting With particularly energy-efficient LED technology, the danger area of the scoring unit is clearly marked. Sliding Table with a Carriage Length of 3000 mm Basic Equipment Sliding Table with a Carriage Length of 3000 mm The Altendorf sliding table is famous for its smooth and precise operation. It can be infinitely locked in any position. The large double rollers, precision-machined from hardened steel, hold the upper carriage in connection with the lower carriage with absolute precision in the respective hard-chrome-plated guide rods. This running quality is maintained even after decades of use and contamination. The carriage is designed as an extremely torsion-resistant and dimensionally rigid multi-cavity system. The table surface is precisely planed and anodized. A hard-chrome-plated round bar, which is positively embedded in the upper carriage, serves as a mount for the cross slide and as an interface for various accessories. The entire unit is low-maintenance and requires no lubrication. DIGIT-L Angle Miter Stop, Cutting to Lengths up to 3500 mm This ALTENDORF-patented stop with integrated length compensation facilitates precise cutting of angles and miters in one function. In both positions, the swivel angle is continuously adjustable by 49° and is digitally displayed. The play-free and robust stop flaps can be easily moved and adjusted as individual flaps over the entire range up to a maximum of 3500 mm. For cutting to lengths up to approx. 1700 mm, the roller-supported, stable telescopic

Condition: used, Year of construction: 2023, Serial number: 17850xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21030 Specifications: - 2023 model Itjdpfsw D N Sqex Aaben - Hours: approx. 800 (will increase) - Certified until 10/2025 - 51.6 kw - Weight: 8500 kg - Undercarriage (see pictures) - Steel tracks with rubber pads - 2024 Rototilt with clamp - Excavator bucket - Cable bucket - Sanding bucket - Quick coupling to the hydraulics on the rotor - Blades - AC/climate - DAB radio - Delivery by agreement Description: 2023 Takeuchi TB280FR crawler excavator with rototilt and 3 buckets. There are steel tracks on the machine with rubber pads. Quick coupling to the hydraulics on the rotor. The machine will be used so the number of hours will increase. Delivery by agreement. Own weight: 8500 Model: TB280FR

Condition: good (used), Heidelberg Eurobind 500 Perfect Binder Machine in very good condition, low mileage, ready for operation. Itodpfx Aoxk U Risabsn From a state-owned printing house. Manufacturer’s description: Professional binder for perfect paperback binding. This fully automatic binder features an exceptionally sturdy design and is equipped with a hot glue gun, making it effective even for small and very small quantities of booklets or pages. The Heidelberg Eurobind 500 is a single-jaw binder with automatic cover feeding, which, operated by a single person, delivers impeccably bound books of consistently high quality. It binds books with a thickness of 2 to 50 mm and a spine length of 120 to 320 mm, with a maximum output of up to 500 books per hour. Integrated milling cutter Automatic cover feeding and creasing. The set includes documentation, waste extraction, a compressor, and an electric book delivery system.

Year of construction: 2021, condition: new, Field of application: Construction Empty weight: 2.620 kg Attachment suited for: Loaders Itsdpjph Rmgofx Aabsn Bucket volume: 6.3 m^3 You can increase dump height equals better performance in loading applications We manufacture high dump buckets for all models-brands. We can find suitable shipping options anywhere in the world. For detailed information please contact us. Bucket Features in the photo Machine Model: Volvo L90H Wheel Loader Bucket Type: High Tip Bucket Capacity: 6,3m^3 Edge Length: 3000mm

Condition: good (used), Year of construction: 2019, operating hours: 1,994 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Fanuc, controller model: Fanuc 31i-B, spindle speed (max.): 10,000 rpm, number of spindles: 1, mount diameter: 100 mm, Operating hours: 7194 / usage time: 1994 Year of construction: 2019 Control unit: Fanuc 31i-B Spindle: PC100i (10.000 1/min) Tool clamping system: HSK 100 Tool magazine / places (Options): Chain/50 Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, KF 400, IKZ 70 bar Positioning range XYZ (mm): 1000 / 1000 / 1000 Pallet size (mm): 630 X 630 Isdpfjvvmnuex Aabstn Workpiece clamping: Hydraulic 80 bar Additonal options, Specifics: HELLER facing slide unit; Receiver for measuring probe (RENISHAW); Coolant temperature control; forward looking collision avoidance; Interface for exhaust system; 3 colour status lamp; work area flush; Scraping conveyor for wet machining; Fast drill fracture sensing (SBBK); multi-spindle-head support (MSK); Thermal growth compensation; Feed force display; Automatic loading sequence; Automatic unloading sequence; increased tool weight 35kg; tool codechip; Since response emails from Maschinensucher often end up in the spam folder, we kindly ask you to regularly check this folder or contact us directly.

Condition: excellent (used), Year of construction: 2017, operating hours: 3,200 h, pressing force: 130 t, Space requirement: 11,500 mm x 10,000 mm + Increased installation height/lift + 230 mm + 4-axis backgauge system + Rear work area lighting + Front work area lighting - TruBend documentation Automation BendMaster (60) Standard equipment: Iedpfx Ajxayl Deabotn BendMaster - Sturdy base frame and manipulator made of cast aluminum construction - Load capacity 60 kg, sheet plus gripper - Low-level floor track in welded construction - Sheet sensor for contour detection - Rotary feedthrough for quick gripper change Gripper coupling on the BendMaster - Sensor system for 4-axis backgauge system - Electric drives - Double sheet detection - NC regrip station - Vacuum generation for suction grippers Control - TRUMPF PC control with operator terminal - Teleservice via internet - Convenient operation: screen, mouse, keyboard Safety - Safety fence with access door Special equipment + Track extension to 10 m + Gripper change console + Modular vacuum gripper without separation (materials for 3 grippers) + Modular vacuum gripper with separation (materials for 3 grippers) + Clamp gripper with rotary axis + Sheet removal station with linear axis + Additional pallet for sheet removal station + Right-hand side door for safety fence (or left-hand side in combination with ToolMaster) Machine - Robust machine frame entirely in steel construction - Press beam - Spherical mounting of pressure beam with inclined position - Electro-hydraulic upper drive system with 4-cylinder technology - Optical set-up and positioning assist with control valves - Generous free space for bending - Flat front covers - Block hydraulic system - Electronic pressure gauge - Measuring system with glass scale and spring-back compensation - Hydraulic oil in machine (lifetime lubrication) - Oil cooler - Electrical cabinet cooling via air-to-air heat exchanger - Modern machine design Backgauge System - 2-axis backgauge system, X and R axes Tool Clamping - Hydraulic upper tool clamping - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - CNC crowning Control - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15-inch touch screen - Network capability - Teleservice via internet Operation - Control panel with LCD keypad and foot switch - Communication rail - MobilControl Safety - Standard safety equipment - CE marking

Condition: used, color: orange, Warranty: 24 months Productivity: 100 tph Polygon can produce mobile or fixed asphalt plants with capacities of 60-240 tons/ h quality asphalt plant are produced with experienced staff. Polygon batch Mix Asphalt Plants Advantages Optimum price, high performance Precision weighing and high quality blend High efficiency rotary dryer and burner Easy Maintenance 7-24 after sale support Possibility of asphalt mixing plant spare parts at reasonable prices Itjdpow Hzgxofx Aabjn Operator friendly asphalt plant automation system Easy assembly and disassembly possibility Products suitable for different asphalt production (mastic asphalt, colored asphalt, recycling​ Aggregates are typically moved from the stockpiles to the cold feed bin using a front-end loader. Cold feed bins are used to dosage the different aggregates used in the mix to the drying drum. Our Advantages; Thanks to its functional design, it facilitates transportation and installation. Attachments have bolted design. Thanks to its high strength silo casing and twisted body undergoes no change in shape under load. Thanks to the frequency-controlled dosing bands, each material can be supplied in any desired rate. The flame size of the dryer burner can be controlled automatically with the measurement sensor (optional)​ Polygon asphalt plant mixer provides long wear parts life and homogeneous blend. Features; Heavy duty group high quality reducer. Heat and abrasion resistant inner liners Long life arms and paddles Double-valved discharge system Discharge valve with external resistance heating Polygon-asphalt plant filter system separates the gas and dust generated during asphalt production. The decomposed filler dust can be used in mixture if desired. Features; Input and output temperature measurement Clean air valve to protect bags from burns Nomex filter bags with vertical casette Dust-proof design Easy bag changing Reverse air flow bag cleaning system Insulation suitable for climate conditions and heat transfer ​The dust collection system includes supporting feet for easy installation and implementation. The filter dust collection system is perfectly tailored to the mixing plant capacity. The vertical layout-of the filter bags guarantees maximum utilisation of the surface area with efficient filter function. Polygon dryer creates a maximum heat transfer surface thanks to its special wing design. With minimum fuel consumption, it allows the removal of humidity of aggregate and heat it up to the desired temperature. Our Advantages; Dryer rollers and rings are manufactured from long-life forged steel. Easily interchangeable bolt-type compensation springs that distributes body load evenly Suitable for stainless steel insulation coating and heat transfer, rockwool covered body With soft starter support, operation without problem under load Automatically adjustable burner according to humidity and amount of aggregate (optional The drum tube, which is made of a thick-walled, solid steel construc- tion, achieves maximum efficiency, very low exhaust gas temperatures and prevents temperature losses during the...

Condition: used, Year of construction: 1997, Drive: Wheel Serial number: 6 tl 0xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20941 Specifications: - 1997 model - Hours: approx. 11,700 - 81.0 kW - Weight: 15,300 kg - Cleaning bucket - ​​Cable bucket - ​​Tooth bucket - ​​Tires (see pictures) - Machine width: 247 cm Itodpfxowx Eame Aaben - Broken windshield - The pilot pump creates pressure, but does not come out now to the main pump. - Ready for delivery Description: 1997 CAT M 312 wheeled excavator with 3 buckets. ECT. The machine is a repair object because the pilot pump creates pressure, but nothing comes out of the main pump, the owner says it is an unknown cause. Ready for delivery. Own weight: 15300 Model: 312

Condition: new, The POSEIDON-1000 cleaning machine is designed to diagnose, wash, and dry DPF filters and catalytic converters of various designs, meeting EURO 5 and EURO 6 standards. The machine offers gentle and effective cleaning through a washing method that achieves excellent results without damaging the expensive filters. The stand operates based on hydro-impact and turbulent fluid movement, using special washing solutions and temperature regimes for effective cleaning. After cleaning, the filter's operating properties are restored by 97%. KEY FEATURES - Testing of the filter before washing to assess the degree of clogging and after washing to check the quality of the cleaning. Itjdpfx Ajpbv Hgoabjn - Automated washing cycle with the possibility of programming all operating modes. Filter cleaning is hydrodynamic, with hydraulic and pneumatic systems operating in specific modes to generate hydraulic impulses for the removal of contaminants. - Accelerated drying of the filter by means of a powerful hot air blower, which allows the complete removal of residual moisture from the product. >> This allows the entire cleaning cycle to be completed in a short time, >> and return to the customer a clean and dry filter ready to be fitted to the vehicle. Perspective business with POSEIDON-1000 • The equipment and technology allow to perform high quality cleaning of DPF particulate filters of all types and brands of cars. • The most functional stand among foreign analogues, thanks to which it has high productivity. • Automated operation and control of the process of cleaning and drying the filter allows the stand to be operated by one person. • Minimal resources and time required to open your own service for cleaning particulate filters with our equipment. • Maximum quick payback of the equipment if you own a service for the repair of automotive units. YOUR BENEFITS + Automated process of DPF filter cleaning with the possibility of programming all the machine's operating modes, gives you the opportunity to independently adjust the washing mode to increase the efficiency of the processes or to work with the modes set by the manufacturer. + Full control of the filter cleaning and drying process is guaranteed by the presence in the standard programme of graphs displaying air or water pressure values in real time. + The filter condition diagnostic function with report printing allows the creation of reports before cleaning (to check the degree of contamination) and after cleaning (to check the quality of the operation performed). + The working surfaces and the body of the stand are not subject to corrosion as they are made of stainless steel sheet material. + The hermetic chamber not only limits the spillage of technical fluids, but also reduces the noise level to acceptable levels, making work on the stand more comfortable and safer. + Quick installation of the DPF filter is possible thanks to a separate pneumatic system for the connection of a universal quick-fit adapter. + The universal tool allows the installation of any DPF filter, regardless of the vehicle type. + Closed-loop fluid filtration is achieved with coarse and fine filters. The filters are equipped with pressure gauges that allow the degree of contamination to be determined. + Rationally selected water tank volume allows to provide short fluid warm-up time, long time between fluid changes. Please contact us to get the best offer!

Condition: used, Year of construction: 2019, Serial number: 5xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21113 Specifications: 2019 model Impact hours: 3550 (may increase slightly) Compressor hours: 5538 (may increase slightly) Engine hours: approx. 8300 (may increase slightly) Winch Rod changer Water mist system Carousel Volvo engine Undercarriage (see photos) Remote control CME grinder L5 GPS Recently serviced Hammer will soon need repacking Work lights Thread greasing system Radio Air conditioning Itodjw Rag Dspfx Aabjn Ready for delivery Description: Sandvik DX800i drill rig with L5 GPS for sale.According to the owner, everything is working properly, and the rig was recently serviced.The hammer will soon need repacking.Ready for delivery.