Used Part Table for sale (29,402)

Year of construction: 1973, condition: used, Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, dividing table, vertical dividing table -Manufacturer: Peiseler, clamping table part table type GT 320x320 -Table surface: 320 x 320 mm Guedpfx Ajqddi Reg Ssh -T grooves: groove width 14 mm, groove spacing 100 mm -Spindle bore: Ø 30 mm -Dimension: 475/410/H125 mm -Weight: 85 kg

Condition: used, Rotating Boring Table Travel X: 2000 mm Gsdpfx Ajz Nxmkjg Sjuh Table size: Length 1240 mm x Width 1250 mm Bench width: 1030 mm Diameter of the ball screw: Ø 70 mm 2 motors INDRAMAT: 1 travel X motor + 1 table rotation motor Supplied without electrical panel (electrical cabinet to be redone) Protector hennig in average condition Ideal part for retrofitting Total bench length: 5200 mm Width: 1900 mm Height: 900 mm Weight: approx 7 T

Year of construction: 2008, condition: ready for operation (used), Bio-Circle Compact parts cleaner / parts washing station Gusdpfsztd Ngsx Ag Soh - Year of manufacture: 2008 - Working area width: approx. 700 mm - Working depth / working area depth: approx. 450-480 mm - Working height: approx. 800 mm - Load capacity / load capacity up to approx. 100 kg - Empty weight: approx. 45-55 kg - Heating power: approx. 650-700 W - Temperature (preset): approx. 41 °C - Electrical connection: 230 V, 50 Hz - Filling volume (optimal / maximum): approx. 100 L - Tank / basin material: LDPE plastic (low-density polyethylene) Dimensions: L x W x H 0.6 x 0.9 x 1.1 meters / Weight 45 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Pneumatic Hold-Down for a Sliding Table Saw – Essential Equipment for Maximum Material Stability A pneumatic hold-down for a sliding table saw is an essential piece of equipment for facilities that require maximum stabilization of the material being cut. The two-section model with a length of 3,200 mm ensures secure and even pressure against the worktable, eliminating problems commonly associated with working without a hold-down – chipping, material waste, and inaccurate cuts. Guodpfx Agevxtcqo Soh Key Advantages Pneumatic hold-down with two independent sections – each equipped with two cylinders, allowing flexible control of the pressure applied to different areas of the table. Extended 3,200 mm beam – provides full coverage of a typical sliding table saw table length and is ideal for processing large-format panels. Optimal working force at low pressure – effective operation from just 2.0 bar, resulting in lower energy consumption and simpler installation. Improved operator safety – securing the material reduces the risk of panel movement and uncontrolled shifting during cutting. Reduced material waste – stable positioning eliminates cutting errors and reduces the amount of waste. Higher edge quality – with no material vibration or movement, cuts are clean and free from burrs and fraying. Construction and Technology The hold-down beam is made of a durable steel profile, ensuring long service life and resistance to deformation. The pneumatic cylinders are arranged in two independent sections, providing even pressure along the entire length of the material being cut. The separation of the pressure zones makes it possible to adjust the clamping force to different panel sizes and thicknesses. The entire system is designed for quick installation on most sliding table saw worktables, making it easy to integrate into existing production lines without modifying the machine's structure. Precision and Work Efficiency Using a pneumatic hold-down on a sliding table saw directly improves cutting efficiency and dimensional repeatability. Even when cutting thin or laminated panels with finished surfaces, the operator can be confident that the material will remain securely in position. This has a direct impact on the quality and appearance of the finished component. Applications The two-section hold-down for sliding table saws is suitable for: furniture manufacturing facilities specializing in cutting laminated panels and MDF, production of structural components from wood and wood-based materials, precision applications where excellent cutting quality and defect-free edges are required, workstation automation, as a component supporting serial cutting processes. Standard Equipment 3,200 mm hold-down beam 4 pneumatic cylinders (2 per section) Set of connectors for connection to the pneumatic system Mounting brackets for installation on the worktable Optional Equipment Quick-release air connection module Additional safety valve Foot control system (pneumatic pedal) Integration with the saw's control panel Technical Specifications Parameter Specification Hold-down length 3,200 mm Maximum material height 100 mm Number of cylinders 4 Operating pressure 2.0 bar

Condition: used, Table milling machine, table milling machine Guodpfx Agscmh H Rs Ssh -Spindle: comes from a Lubimez bench milling machine -Table milling machine: with rigid spindle -Dimensions: 800/800/H400 mm -Weight: 95 kg

Condition: new, The rotary type cleaning unit allow to process parts directly on board the work-cells avoiding costly transport operations. The transfer of the components takes place with an in-built rotary index transfer system which guarantees satellite positioning at loading / unloading and inner operations. Considerable flexibility in the change of costumized jigs as components holders. Elimination of packaging costs and transport costs Re-equipment of the plant in a very short time Number of satellites to be selected in accordance with a defined and accurate washing, blowing and drying process; Guedpfx Agowdfyqe Ssh These plants are fit for the treatment with aqueous detergent solutions, as: Critical machined parts and delicate parts with blind holes and threaten holes, compoenent as: valve bodies, automatic actuators, burner bodies, water meters, friction flywheels, gas valves, hydraulic, pneumatic multichannel distributorss. a.s.o.).

Year of construction: 2021, condition: new, Display tables, as commonly found in department stores (e.g., Karstadt), mobile – New. Large: Gusdpfsz Dtgyex Ag Seh 5 pieces, price ex works: €500 total (net)! Small: 4 pieces, price ex works: €300 total (net)! Manufacturer: unknown Type: BERLIN TABLE LARGE / BERLIN TABLE SMALL Year of manufacture: 2021 Material: wood Dimensions: Large: approx. 1.20m x 1.80m - legs (with castors) approx. 70cm long Small: approx. 0.75m x 1.50m - legs (with castors) approx. 40cm long Condition: New Available: immediately Location: Hamburg

Condition: good (used), 2 packing tables, with partition panels for cardboard boxes – used – Price for both together, ex works: €500.00 (net)! Manufacturer: unknown Type: unknown Guodpfxez Dtibs Ag Sjh Year of manufacture: unknown Dimensions: unknown, depth approx. 80 – 90 cm, width approx. 2 m Condition: used Available: immediately Location: Hamburg

Condition: used, Year of construction: 2022, PANEL SAW WITH TILTING SAW BLADE Linvincibile SI 5 KEY FEATURES SLIDING TABLE: GUARANTEED SUPERIOR CUTTING QUALITY OVER THE LONG TERM TELESCOPIC ARM: AN “UNBEATABLE” SMOOTH MOVEMENT SAW UNIT: FOR A PERFECT CUT Technical Data SI 5 Main saw blade diameter (mm): 550 Cutting capacity with extendable fence - with table 3200 mm - with table 3800 mm 3200x3200 3800x3200 Saw blade tilt (degrees): 46 Max. cutting height at 90° (mm): 200 Max. cutting height at 45° (mm): 130 Saw blade speed (rpm): 2500-3500-5000 Scoring blade speed (rpm): 8500 - Extractor port diameter: - on frame - on blade guard 120 100 Main motor power [S6 -40%] Hz50 kW: 7 Scoring motor power [S6 -40%] Hz50 kW: 0.9 Cutting width at rip fence (mm): 1600 Standard equipment and accessories - Optimizer/Process control app for tablets: SCM Thundercut. The app can be downloaded from the App Store or Play Store for tablets compatible with iPadOS or Android. It can be activated via the QR code supplied with the machine. The app enables: * Management of machine fleet and material/panel storage * Creation and editing of projects, importing projects from main furniture design software (file format "cpout"), importing cutting lists * Optimization of cutting lists by selecting one or more proposals from the optimization software integrated into the app * Correct machine settings for each cut, thanks to the simple and intuitive graphics of the 3D sequencer, guiding the operator step by step * Printing barcode labels to identify the various parts, via Bluetooth connection with compatible label printers. - 10-year warranty on the sliding table guide system - Sliding carriage entirely made of aluminum structure with guidance on crimped, hardened and arc-ground steel rails with large contact area - Max. saw blade diameter* up to 450mm with scoring blade mounted* up to 550mm without scoring blade - eye-S 15" electronic control including: * 15" touchscreen monitor * Direct control of the following working axes with manual, semi-automatic, automatic, and incremental modes: - Height adjustment of the main saw blade - Tilt adjustment of the saw unit - Rip fence adjustment - Height and lateral adjustment of the scorer (the scorer is automatically raised to the set position on activation and lowered on deactivation) * Operator assistance functions for complex cuts * Ability to store up to 1000 programs with associated image * Ability to store up to 1000 different tools with associated image * Cutting process management of preloaded parametric machining programs * Environment for creating and storing new sequenced working programs * Automatic import of working dimensions from Thundercut app * USB port * Ready for network connection - Auxiliary function of the electronic control, including: * Determination of correct fence position on rip fence for format processing with tilted saw blade * Determination of correct fence position on rip fence for angle cuts with mitre fence on the work table with or without tilted saw blade - Pivoting control panel above the table - Scoring unit with independent Gedpfx Ajz Hb Nbog Seuh

Condition: used, Roller support for saw, composed of: 2 supports: L 3000 mm x Max width 550 mm x Mini height 800 mm - Max height 950 mm 1 support fitted on machine side (see photo): L 3000 mm x Max width 550 mm x Mini height 800 mm - Max height 950 mm Gusdpfjz I Dg Eex Ag Seh Rolls width: 450 mm

Condition: excellent (used), Year of construction: 2020, - total length: 8,1 m - total width: 1200 mm - height: 950 mm Gujdpfx Agjtddw Ae Seh Hydraulic lift, lifting capacity around 1 ton.

Condition: used, Year of construction: 2006, number of axes: 3, working width: 1,250 mm, working length: 3,100 mm, TECHNICAL DETAILS Working area, X-axis: 3,100 mm Working area, Y-axis: 1,250 mm Max. panel thickness: 85 mm Number of controlled axes: 3 Drilling unit Number of drilling units: 1 Position of drilling unit: top Vertical drilling spindles: 7 Horizontal drilling spindles, X-direction: 2 Horizontal drilling spindles, Y-direction: 2 Total number of vertical and horizontal drilling spindles: 11 Milling unit Number of milling spindles: 1 Position of milling spindle: top Controlled axes: 3 Gusdpsz En Afsfx Ag Ssh Motor power: 9 kW Automatic tool changer: yes Grooving unit Number of grooving units: 1 Position of grooving unit: top Swivel positions: 0° / 90° Number of tool magazines: 1 Tool positions: 8 Position of tool magazine: machine side Number of work tables: 1 Table width: 3,100 mm Table length: 1,250 mm Table material: phenolic resin MACHINE DETAILS Number of vacuum pumps: 1 Suction capacity per pump: 250 m³/h Control system: PC Control Programming software: WoodWOP 5.0 EQUIPMENT Flat table design Nesting work table Vacuum pump Automatic tool changer Tool magazine positioned on the side Safety light barriers CE marking The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6279

Condition: excellent (used), Motor-driven NC rotary table Stepless rotary table (pitch 0.001°) Attached pallet station: pallet changing table (2 pallets) Manufacturer: Rückle Type: PKTF 1200 Table size: 1200 mm x 1200 mm Total height: 660 mm Centring hole: 100 H6 mm Godjfk R Tdspfx Ag Seuh Clamping grooves: 7 pieces Slot dimension: 22 H7 mm Slot distance: 160 mm The displacement is measured via a ROD 250 rotary encoder. Condition: Very good (used) Optionally with machine bed (travel = 2000 mm ) About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a free specialist for SHW machine tools. Our main focus lies in the field of tool milling machines. Our services include the supply of spare parts, on-site customer service, machine overhauls and control modernization. Services: - Used machines - spare parts - after-sales service - machine service - machine overhauls - control modernization

Condition: good (used), Motor-driven NC rotary table Stepless rotary table (pitch 0.001°) Manufacturer: Rückle Type: PKT 1000 Clamping surface: 1400 mm x 1400 mm Clamping grooves: 7 pieces Slot dimension: 22 H7 mm Slot distance: 160 mm Condition: Very good (used) Optionally with machine bed About us: Guedpfx Asfr Ih Dsg Seh MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a free specialist for SHW machine tools. Our main focus lies in the field of tool milling machines. Our services include the supply of spare parts, on-site customer service, machine overhauls and control modernization. Services: - Used machines - spare parts - after-sales service - machine service - machine overhauls - control modernization

Condition: good (used), The Bystronic glass cutting line for split band dimensions (Maximum 3300 x 2550 mm) Service/spare parts are provided by Hegla, who purchased Bystronic. 1 Bystronic KTR tilting table, Serial No. E9801016-1, o Tilts with built-in hydraulics, roller drive for automatic glass transport to the cutting table Guodpfxjt Et Ico Ag Sjh • 1 fully automatic float glass cutting table o Type: XYT 972, Serial No. E980016-2 o Can also be used for shaping, waste optimization, and PC Terra o Maximum dimensions 3300 x 2550 mm o Glass thicknesses 2-15 mm o With belt conveyor • 1 breaking table with breaker bars and air cushions o Serial No. E980016-4

Condition: used, Year of construction: 1987, machine/vehicle number: 152336, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, cutting width (max.): 1,250 mm, saw blade diameter: 450 mm, For sale is a robust and reliable Martin T72 panel saw, manufactured in Germany to the highest quality standards. This machine comes from Otto Martin Maschinenbau and is known for its high precision, stability, and durability. It is ideal for carpentry shops, joineries, or ambitious woodworkers. Further technical data: Saw blade diameter: 200 - 450 mm Sliding table length: 2200 mm Speeds: 2,800 / 4,000 / 5,500 rpm Rated current: 11.0 A Gedpfx Aoz Rvubog Ssuh The machine is in used condition and was in service until recently. The Martin T72 impresses with its solid construction and the high processing quality typical of Martin. The machine is sold without an extension arm and rip fence. Inspection and a test run can be arranged. The machine is sold without warranty due to its age. It still needs to be checked whether the digital display on the parallel fence is working!

Condition: new, ZEATZ PHL Rotary Tables – for workpieces up to 150 tons The ZEATZ PHL linear series combines highly precise rotary table technology with an integrated linear axis. It enables flexible machining solutions for large and heavy workpieces – from precise positioning to simultaneous rotary and interpolation machining. Your advantages: ✔ Integration into machines with HEIDENHAIN or SIEMENS controls ✔ Service and spare parts supply directly through JMT in Germany ✔ Technical support and on-site service in Germany Guedpfem Tv Azex Ag Sjh ✔ Training and instruction for operating personnel ✔ Flexible financing options: leasing or hire purchase ✔ 24-month warranty Technical specifications: Table sizes: 1,000 x 1,000 mm 1,200 x 1,200 mm 1,500 x 1,500 mm 1,800 x 1,800 mm 2,000 x 2,000 mm 2,500 x 2,500 mm 3,000 x 3,000 mm 3,500 x 3,500 mm 4,000 x 4,000 mm (round clamping surfaces also possible) Maximum workpiece weight: approx. 6,000 to 150,000 kg Linear axis: Travel: approx. 1,000 to 3,000 mm (in 500 mm increments) Positioning accuracy: ± 5 angular seconds Integration: Compatible with HEIDENHAIN, SIEMENS, and FANUC controls Contact us – we will be happy to advise you and prepare an individual offer.

Condition: new, ZEATZ NC rotary tables, PHV series – available for short-term delivery The ZEATZ NC rotary tables of the PHV series stand for high precision, stability, and flexibility in demanding machining tasks. They are ideally suited for precise positioning, turning, and interpolative machining and can be integrated into both new machines and existing milling machines. Your benefits: ✔ Integration into machines with HEIDENHAIN or SIEMENS controls ✔ Service and spare parts supply directly via JMT in Germany ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel Gjdpfx Agjm Tvz Dj Seuh ✔ Flexible financing options: leasing or hire purchase Technical specifications: Working position: Vertical / Horizontal Available sizes: Table diameter 500 / 600 / 800 / 1,000 / 1,200 mm Also available with square clamping surfaces as an option. Max. workpiece weight: • Horizontal: up to 20,000 kg • Vertical: up to 4,000 kg Positioning accuracy: ± 3" Contact us, and we will be happy to advise you on selecting the appropriate ZEATZ NC rotary table and provide you with a customized offer.

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 45 kg, total length: 600 mm, total width: 400 mm, total height: 690 mm, input voltage: 230 V, input frequency: 50 Hz, laser power: 20 W, laser wavelength: 1,064 nm, scan area length: 110 mm, scan area width: 110 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks and without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials Guodpey Emthefx Ag Seh

Condition: like new (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, total width: 2,600 mm, total length: 3,700 mm, overall weight: 2,700 kg, type of input current: three-phase, input voltage: 6,000 V, input frequency: 50 Hz, pressure: 6 bar, Automatic glass cutting table for monolithic glass with loading-unloading arms. Main features: - Rectified rack-and-pinion transmission and linear guides with “0” clearance, ensuring high precision of movement on both axes. - Metal structure made of sheet metal profiles cut on a laser cutting machine and formed on a bending machine. The resulting structure has a minimum number of weld seams and, therefore, high dimensional accuracy and stability. - Latest generation, brushless electric motors, Lenze – Germany. - Automatic detection of glass thickness and automatic adjustment of the cutting head pressure to achieve maximum cutting quality. - The control panel can be located up to 7 meters away from the table. Godpfxsz Rvi Eo Ag Ssuh - Hydraulic folding of the loading-unloading arms. - The loading cycle is as follows: the extensions of the folding arms are manually pulled out, and the folding into the vertical plane is commanded. The glass is supported on the bases of the arms, and the folding is commanded. After the glass reaches the horizontal plane, it is manually positioned by the operator anywhere in the cutting area. - Automatic detection of the glass position (automatic squaring) and automatic correction of the cutting head trajectory (the glass can be positioned anywhere on the surface of the cutting table). - “Double 0” system that allows mirror cutting of laminated glass with an accuracy of ± 0.5 mm. General feature: - The work surface of the Turomas tables is made of aluminum covered with a phenolic plate that is ground on one side, and a synthetic felt is glued on top. Since there are no wooden plates in the structure, there are no pressure losses in the air cushion. Also, due to the phenolic plate (a latest generation plastic), the work surface of the table is particularly resistant to mechanical impact, deformation, solvents, acids, humidity, and water vapor. - Intuitive TUR-ISO operator interface, easy to use, developed in a single window. The cutting plan can be viewed and edited in a field of this window. The Maintenance menu can also be accessed from this window, where all the set parameters of the machine can be viewed and modified. - Remote technical support system via the Internet for quick diagnosis and service. - Protection system with barriers and emergency stop button. - Scanner Scanning is done through a sequence of points, which are then converted into curves. The template thickness can be up to 20 mm. - VIN-CUT vinyl cutting - BRK 23 system - Consists of 1 transverse breaking bar + 1 longitudinal breaking bar (materialized by points). This breaking system guarantees minimal contact with the glass surface and maximizes the reduction of potential scratches due to the wear of traditional breaking bars (with a wooden contact surface). Automatic system for transferring the cut glass sheet from the cutting table to a breaking table. The system is mounted on the cutting bridge, on the opposite side of the cutting head, and consists of two vertical pistons that allow the glass to be moved to the next table. Cutting head with two cutting rollers. The table reads the glass thickness and automatically selects which of the cutting rollers to lower. By using this option, the entire range of glass thicknesses that can be cut is covered, in the range of 2 - 25 mm.

Condition: good (used), Year of construction: 1982, For cutting plate Produce 1982year Guodpfx Ajz Rni Djg Seh

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 76-1302, overall weight: 7,900 kg, input voltage: 380 V, input frequency: 50 Hz, Schneider CNC die-cutting machine, Type 2032, with vibrating table, Type 3041 For sale is a high-performance CNC die-cutting machine from the Swiss quality manufacturer Schneider Maschinenbau AG, including a vibrating table, Type 3041. The system is ideally suited for processing and die-cutting cardboard, corrugated cardboard, and packaging materials. Thanks to its robust industrial design, the precise NUM-750 CNC control system, and the automatic material handling, the machine still offers an economical solution for many packaging and display applications today. Technical data, Schneider Type 2032 Year of construction: 1992 CNC control: NUM 750 Power: 28 kW Voltage: 380 V / 50 Hz Operating pressure: 100–240 bar Machine weight: approx. 7,900 kg Swiss Made Vibrating table, Type 3041 Year of construction: 1986 Power: 3 kW Weight: approx. 1,600 kg Equipment CNC-controlled die-cutting system Hydraulic clamping system Automatic material feed Pneumatic hold-down devices Includes vibrating table Extensive conveying and feeding system Condition The machine comes from industrial use and can be inspected by appointment. Sale includes all existing system components as shown in the photos. Total weight of the system: approx. 9.5 tons Inspection possible at any time by arrangement. Loading and transport are the responsibility of the buyer. Godpfjz R Dncjx Ag Ssuh

Condition: ready for operation (used), Year of construction: 1998, machine/vehicle number: 79-12/075-98, functionality: fully functional, input voltage: 380 V, input current: 86 A, input frequency: 50 Hz, type of input current: three-phase, spindle diameter: 30 mm, pivoting range: 45 °, rip fence adjustment: manual, actuation type: electric, table length: 2,000 mm, total length: 2,220 mm, total width: 710 mm, total height: 1,220 mm, overall weight: 450 kg, Equipment: documentation/manual, Everything on the machine is in perfect working order. The sliding table has a length of 1920 mm. It was manufactured without brakes. It is in the condition shown in the pictures and is available for testing on a pallet. Gujdpfx Agoz N S Izo Ssh

Condition: excellent (used), Year of construction: 2020, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 125 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, Sliding table saw Robland Z400-EL. A robust, professional machine for precision cross-cutting and ripping of wood panels and solid wood. Ideally suited for carpentry, furniture making, and workshop use. Specifications and features: * Electric height and tilt adjustment of the saw blade with digital readout * Sliding table length: 3,200 mm * Saw blade capacity up to 400 mm * Cutting height up to 125 mm at 90° * Variable speeds for different blade diameters * Scoring unit * Digital readout for rip fence position * 10 hp motor, separate scoring unit Guodpjz R Nuisfx Ag Seh In perfect working order. Transport across Europe can be arranged at a good price.

Condition: used, functionality: fully functional, total length: 2,400 mm, total width: 1,200 mm, Demmeler 3D welding/clamping table for sale. Main item: - Manufacturer: Demmeler - Type: 3D welding/clamping table Guedszv N Nwopfx Ag Soh - Approximate table size: 2400 x 1200 mm - Used condition - Condition and completeness are shown in the photos. Additional welding tables are also available and can be purchased separately or as a package: - Siegmund 3D welding table 2400 x 1200 mm – EUR 4,900 - Siegmund welding table 1500 x 1000 mm – EUR 2,200 - Siegmund welding/clamping table 1000 x 500 mm – EUR 800 Package price for all 4 welding tables: EUR 11,900 EXW Estonia. Used equipment, sold as is. Individual sale or package sale can be discussed. Loading: Forklift/pallet handling capability is available on site. We can load the tables onto the buyer’s truck. Transport: Transport is at the buyer’s expense.