Used Cutter Stacker for sale (4,563)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2316020V1.14, Year of construction: 2021, operating hours: 4,800 h, load capacity: 1,600 kg, empty load weight: 1,210 kg, total height: 2,800 mm, total length: 1,600 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Rated capacity: 1,600 kg MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,600 x 600 x 2,800 mm Weight: 1,210 kg Voltage: 24 V Iodpoy R Uw Sofx Amyeat Minimum battery weight: 300 kg Maximum battery weight: 510 kg Note: The operating hours counter is defective.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and blank separation - as is - System equipped with a high-performance sheet feeder designed for automatic NON-STOP operation ⦁ For fully automatic punching, creasing, and embossing with or without gripper edge ⦁ For removal of internal waste as well as lateral and rear sheet edges ⦁ For stack-like delivery of punched and waste-removed sheets with attached gripper edges or ⦁ For separation of gripper edges and subsequent stack-like delivery of the remaining sheets ⦁ With a patented gripper carriage registration system for highest registration accuracy ⦁ With a pile stacker machine enabling fully automatic interleaving sheet feed as well as NON-STOP stacking and does not require modification even for the smallest job sizes (exchange table with comb structure) ⦁ Interleaving sheet magazine with electronic level monitoring, refillable during production ⦁ With Centerline equipment ⦁ With automatic pallet change device at the delivery section Specification Maximum sheet size: 760 x 1060 mm Minimum sheet size: 350 x 400 mm Maximum punching force: 3.3 MN (330 t) Speed: 9,000 sheets/hour Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 3 mm (max. sheet warp 4%) Equipment: Optical sheet register (Dyset) Automatic non-stop feeder Waste removal station Blank separation station Centerline Fully automatic pallet changing device at delivery Incl. platform Iedpsww E Nrefx Amyeat Quick-lock frames at all tooling stations

Condition: good (used), Ram Punch Gerhard Busch CL Label die cutter Professional machine made in Germany. Very good condition, ready to operate. Iaedpfxsy Sfbke Amyet Bush is a leader in the production of labeling machines and pushers. 100% functional, with no signs of wear. Technical specifications: Max. format: 330x380mm Min. format: 130x180mm Cycles: 8/min Stroke length: 180mm Capacity: 400,000 sheets/h Installed power: 15kW Weight: 2600 kg The machine is equipped with a quick-action hydraulic unit. Safety guards, photocells activating automatic operation, and quick-adjustable die-cutting clamps with a crank. Angle adjustment of the entire head, piston stroke adjustment, and table adjustment. Feeder table adjustable in all planes. Two operating modes: automatic and manual. Tail on the delivery. Tool kit, conveyor belt for removing waste to the container. Made in Germany.

Condition: good (used), Laminating Machine Komfi Delta 76 Stacker Manufactured in 2016/2017. The machine is 100% operational and ready for operation. This is an advanced, high-performance machine, ideal for commercial laminating. The machine is in very good condition and ready for production. Technical specifications: Max sheet size: 760mm x 1120mm Min sheet size: 300mm x 220mm Min grammage: 115 gsm Max grammage: 600 gsm Operating temperature: 80-145°C Max operating speed: 35m/min Built-in Becker compressor Weight: 2800kg Iajdpfx Amey Sd Tleyet 380V power supply Additional air supply: 6 bar Power consumption: 18kW Pneumatic clamping, separation, and automatic feeding from a high stack, automatic stacker. Touch panel for easy operation. Sheet straightening module. Tool kit and foil included.

Condition: good (used), Steel wire sheet cutter Cutting length 3900 mm Dimensions Length: 5100 mm Width: 1700 mm Height:3100 mm Iasdjgiplvjpfx Amyjt

Condition: good (used), Uchida Aero Cut One Creaser, Slitter, and Cutter The machine is fully operational and ready for production. Description: The AeroCut One cuts, perforates, and creases sheets in a single pass. Only one person is needed to operate the device, significantly improving work efficiency and, consequently, reducing costs. The device is programmed using an intuitive touchscreen control panel. Cutting, creasing, perforating Maximum paper size – 370 x 520 mm Min. paper capacity – 55 x 45 mm Maximum grammage – 400 g/m² Speed ​​– 11,130 business cards/h Paper types – offset, coated paper, varnished Feed – belt with adjustable vacuum Creasing – strip-type Memory – 263 programs + 150 user-defined Touchscreen programming PC connectivity Double-feed detection Weight: 240 kg Iaodpfxsy Nzk Ns Amyot Power supply: 230 V Made in Japan.

Condition: used, High lift pallet truck, pedestrian stacker, pedestrian stacker HANSELIFTER - Hanse-Lifter Type E-SDJ1016-01 Wide-track pallet truck Series. Year of construction 2014 Rated load capacity pedestrian stacker 1000 kg Load capacity special construction device GIESLER 200 kg Nominal lift height 1600 mm Fork length 530 / 770 mm Fork carriage width 950 mm Underride height of wheel arms 130 mm Operating voltage hydraulic unit 12 Volt Iasdpfxohxvuwj Amyjt Overall height 2160 mm Overall length 1650 mm Overall width 1860 / 1200 mm - Manual driving mode - Electro-hydraulic lifting device - adjustable track width from 950 to 1650 mm (width between the wheel arms) - 1 12 volt battery - separate charger 12 Volt, 15 Ampere - Steel fork carriage on the mast - Fork carriage special construction device GIESLER, load capacity 200 kg - Fork carriage made of aluminum plate with precision guide, lateral adjustment via clamping lever - Stainless steel forks, complete length 770 mm to swivel plate - Forks cannot be lowered to the ground due to special construction device (approx. 170 to 250 mm depending on track width) Dead weight 485 kg as good as new condition

Condition: used, Plasma cutting unit, plasma cutting machine MESSER GRIESHEIM Type Plasmastar HA 95 Isdpfoyah R Njx Amyoat Serial No. 4040323 Year of manufacture: 1990 Power: 95 Amp. - 60% duty cycle 45 Amp. - 70% duty cycle Adjustment range: 2 steps Cutting capacity: 25 mm (clean cut) Severance cut up to 45 mm Hand torch: PHC 95/140 Power supply: 380 Volt, 50 Hz, 32 Amp. plug - Water-cooled - New hand torch BINZEL ABICOR, Type Abiplas Cut 200 W - 6 meter hose package length - Operating manual Space requirements (L x W x H): 900 x 480 x 850 mm Weight: 160 kg Very good condition

Condition: like new (used), Year of construction: 2015, STILL EGV S 14 (2015) Serial number: F20221F00330 The truck is supplied with a charger included. Iaedpsy Nagpofx Amyot

Year of construction: 2015, condition: used, workpiece length 1.500 - 6.000 mm work piece width 50 - 200 mm workpiece height 20 - 100 mm Max. Layer weight 450 kg Max. Stack size 6 x 1,2 x 1,35 m Paternoster stacking system, destacking or outfeed mechanization Sicko type X-Stacker for automatic stacking of workpieces after planing systems. The system is designed for a continuous material flow and enables the formation of layers and bundles in several fixed lengths. Ideal for the efficient stacking of wooden workpieces. The system consists of an infeed roller conveyor after the planing machine with a length of 10.3 m, the stacking unit and a roller conveyor (buffer section) after stacking with a length of 7 m. Technical details on request. Iaedeyz Df Tepfx Amyjt Also available is the complete planing line, the planing machine or the Weinig High-Mech loading magazine.

Condition: excellent (used), Number of knives Z2 V2 width 17 mm circle diameter 160 mm Iasdpfey Apf Uex Amyjt material Stahl WP Bore diameter 40 mm Jointing rebate cutter Weinig type 530 160 for use on the planing spindle of Weinig planing machines.

Condition: good (used), weight 120 kg length 800 mm width 600 mm height 330 mm Remaining stock of new and used milling cutters with bore, end mills, drills, dowel drills, inserts and various other cutters. Iajdpjy Aa I Tefx Amyot Manufacturer: Leitz, Leuco, Oppold, and many more Interesting for every well-equipped sharpening room.

Condition: used, Bore: 40 mm Diameter: up to 160 mm Designation: MEC Iedpfox H Tg Rex Amyjat Lot of round bar milling cutters for producing Ø 20, 25 & 40 mm.

Condition: used, Bore: 50 mm Swing diameter (ø): 161 mm Length: 15 mm Material: steel Ijdpfx Asxvcb Homyjat Knives: WP Z2 V2

Condition: used, Bore: 30 mm Iajdpfx Amsxrdl Eoyjt Width: up to 80 mm Diameter: up to 148 mm Marking: BG-Test Lot of various profile cutters from Leitz in very good used or near-new condition.

Condition: used, Marking: None or MEC Isdpew U Ay Iofx Amyoat Lot (approx. 30 pcs) of various cutters and cutter combinations, mainly from Leitz, for MEC feed or without marking.

Condition: used, Bore: 30 mm Iaodswu Nypepfx Amyot Swing diameter (ø): 100 mm Designation: MEC Length: 55 mm Material: steel Knife: Reversible knife Z6

Condition: used, Bore: 40 mm Iaedpowrrnwefx Amyot Swing diameter (ø): 125 mm Length: 30 mm Material: steel Knives: WP Z2

Condition: used, Bore: 40 mm Iajdewrrmmjpfx Amyst Swing diameter (ø): 125 mm Marking: BG-Test Length: 30 mm Material: steel Knife: WP Z2 V4

Condition: used, Bore: 35 mm Cutting circle (ø): 140 mm Length: 40 mm Iedpewma S Tefx Amyoat Material: steel Knives: WP Z2 V2

Condition: used, Bore: 40 mm Swing diameter (ø): 145 mm Length: 17 mm Material: steel Iedpfov Dgmmox Amyeat Blades: WP Z2 V2

Condition: used, Bore: 40 mm Swing diameter (ø): 145 mm Length: 17 mm Material: steel Blades: WP Z2 V2 Iodsv Df Shjpfx Amysat

Condition: used, Application: Woodworking Diameter: Various Weight: 12 kg Length: Various Shank: Various Iedpfsvy Apiox Amyeat As-new, unused, sharpened, and used shank cutters and drills for CNC machines as exemplarily shown.

Condition: used, Bore: 30 mm Ijdpfx Ast Stbijmysat Width: 40 mm Cutting circle (ø): 125 mm Material: steel Knives: WP Z2

Condition: used, Bore: 30 mm Iodpfxjt Sta Se Amyoat Width: 65 mm Flight circle (ø): 110 mm Marking: MAN Material: Steel Blade: PM Z2 with deflector