Used Compensating Stacker for sale (2,724)

Condition: used, Year of construction: 1999, Brochure stacker Müller Martini Pratico: 1999 Nwsdsw S I D Tjpfx Abbsp Description: - Compensating stacker - Delivery to the left Max. mechanical speed: up to 15.000 single products/h Maximum size range: 480 x 320 mm Minimum size range: 148 x 105 mm Maximum pile height: 250 mm

Condition: used, Kreuzleger / Compensating Stacker Müller Martini Perfetto Year 2007 - SN. MMZO 1 306 445 - 60 Nodpfxevuzpqj Abbowp Mechanische Leistung - Meachnic Spped max. 16.000Ex/h Manuals all included --sehr guter Zustand / very good condition-- Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2006, condition: used, Gaemmeler KL 540 Compensating Stacker with attached blocking device VM 500 The compensating stacker KL 540 is equipped with the proven Gaemmerler LiftPack technology. The KL 540 is suitable for bundle heights up to 300 mm. Nummerous options allow to meet the individual customer requirements. Condition: cleaned and ready for production Technical Data: Cycle time ≥ 1,5 sec. (depending on the copy) ≥ 1,2 sec. with Servo pusher (depending on the copy ) Pagination 4 – 96 Heatset / Gravure Formats A 105 – 330 mm (with rear-eject 105 – 310 mm) B 140 – 500 mm D max. 560 mm Layer height max. 200 mm Bundle height max. 300 mm Weight: 1.500 kg approx. Gaemmerler VM500 blocking unit Cycle time: (approx. 6.7 sec) per pack with a pack height of 300 mm and a blocking time of 2 sec. The cycle time per pack increases when the blocking time is increased and the pack height is reduced. The cycle time is also strongly influenced by the output speed of the compensating stacker and thus by the product (surface, format). Sizes: Width: 140 to 500 mm - 5.5" to 19.7" Length: 105 to 330 mm - 4.13" to 13" Pile height: 55 to 400mm - 2.16 to 15.7" Inlet height: 890 mm - 35" Outlet height: 890 mm - 35" Nwsdpfjh Nrh Uox Abbjp Connected load: 16A (2KW, 380/480 Volt, 3 phases, neutral) Air requirement: 1000 standard l/min, 6 bar; unoiled, dry air Weight: approx. 500 kg

Condition: good (used), Year of construction: 2009, The FERAG MultiStack is a compensating stacker which is used at the end of an inserting line for depositing printed products. Njdetk S Ecopfx Abbewp

Year of construction: 2005, condition: ready for operation (used), Built in 2005 Fall height 400 mm Size max 450 x 340 mm min 240 x 170 mm Nodpsd Hr N Dofx Abbjwp Mechanical speed 80.000 c/h Equipment • outfeed to the right • belt delivery

Condition: excellent (used), Year of construction: 2003, Ref:10925 . 2003 Muller Martini 3631 ‘CB-16’ Book Stacker. Compensating counter stacker for perfect bound books. Comprising:- Positive tape infeed 2-up product handling capability Separating and counting system Automatic function monitoring by micro-processor Electronic programming of counting function Twin tape table delivery. Specification: Book size, Max: 450 x 450 mm Nwjdjvzzt Aepfx Abbjp Min : 140 x 100 mm Intake thickness, Max: 3 - 70 mm Stack height, Max: 240/300 mm Mechanical speed, Max: 18,000 cycles/hr. Air required : 6 bar, consumption: 50 Nm3/hr. (Note: separate compressor or in-house supply required).

Condition: ready for operation (used), To suit any saddle stitcher, Price £3,000  IN STOCK Njdpfx Abjir E R Uobjwp

Year of construction: 2005, condition: ready for operation (used), Built in 2005 Fall height 400 mm Size max 450 x 340 mm min 240 x 170 mm Mechanical speed 80.000 c/h Equipment • outfeed to the right Nwjdpfxjd Hr Rnj Abbep • belt delivery

Year of construction: 1997, condition: used, Built in 1997 Size max 450 x 340 mm Nedpfx Asdiqh Nobbowp min 148 x 105 mm Speed max 80.000 c/h

Year of construction: 2001, condition: ready for operation (used), Built in 2001 Size min 102 x 152 x 7 mm Nwjdpfx Asdyky Tjbbep max 320 x 470 x 64 mm Speed max up to 15.000 Prod./h Table height 876 mm

Condition: good (used), Size: max 500 x 330 mm min 140 x 150 mm Product thickness: side 4-96 Seiten Speed: Nwjdpfx Asg Du Aujbbjp max 100.000 Ex./h Pile height 300 mm Infeed height 500-1920 mm Delivery height 890 mm Power requirements 2 kW (220/380V, 50Hz) Length 3077 mm Width 894 mm Height 1835 mm Weight 960 kg (approx.)

Year of construction: 1997, condition: ready for operation (used), Built in 1997 Size max 480 x 320 mm min 148 x 105 mm Nodpfx Abod Hl N Robswp Product thickness max 20 mm min 2 mm Speed max 20.000 c/h

Year of construction: 1998, condition: ready for operation (used), Built in 1998 Size min 102 x 152 x 7 mm Nedpfxodykhmj Abbswp max 320 x 470 x 64 mm Speed max up to 15.000 Prod./h Table height 876 mm

Year of construction: 2006, condition: like new (used), Built in 2006 Nedpfod Hr Ncsx Abbowp Condition like new!

Year of construction: 2001, condition: ready for operation (used), Built in 2001 Size max 450 x 320 mm Nodpfxod Ewfij Abbswp min 140 x 100 mm Product thickness max 40 mm Speed max 16.000 c/h Pile height max 280 mm min 150 mm Infeed height max 940 mm Delivery height 850 mm

Year of construction: 1999, condition: ready for operation (used), compensating stacker Nwsdpfxjdyguwe Abbep Built in 1999

Condition: ready for operation (used), Year of construction: 2011, Built in 2011 Nwodped N D Npofx Abbep

Condition: good (used), Year of construction: 2006, Year of manufacture: 2006 Size: max 480 x 330 mm; min 148 x 105 mm Speed: max 30,000/18,000 c/h Bsl220Isqku Equipment Delivery rights Nwjdpfx Abou R Nmyobep The advert was translated automatically. Translation errors are possible.

Year of construction: 2004, condition: good (used), Year of Construction: 2004 Description: Transforms the shingled stream behind a web press into counted and compensated stacks for further processing or distribution. No. of products per layer / stack are easily programmable. Details as shown below. Speed: 90.000 cph (product permitting) min format product (head/foot x spine): 102 mm x 145 mm (4.00" x 5.75") max format product (head/foot x spine): 320 mm x 500 mm (12.63" x 19.68") max pagination: 48p Product orientation: Spine leading Low Infeed Infeed height (min/max in mm): 600-1200 mm Waste gate Stream Aligner / Jogger Single squeeze roller Laser Counter, model: Baumer Scatec-1 Upper bin height in mm: 210 mm Upper Bin with 3 forks Turntable with compression plates max Stack height in mm: 330 mm Servo turntable Pneumatic pusher Delivery Direction to the right Delivery height in mm: 876 mm (34.50“) Air Delivery Table included Over all length equipment: 2650-2950 mm Over all width equipment: ~700 mm Nwodpfjh Ir E Esx Abbsp Over all height equipment: ~1800-1950 mm Input Power: 3 kVA, 50/60 Hz, 3 ~ Air requirement: 170 l/min 5.5 bar (6 cfm 80 psi) Weight: 945 kg (2100 lb) Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Mechanical / electrical machine test possible Condition: cleaned & in working conditions

Condition: good (used), Year of construction: 2006, Year of Construction: 2006 - Speed: ~90.000 cph (product permitting) - min format product (head/foot x spine): 105 mm x 140 mm - max format product (head/foot x spine): 330 mm x 500 mm - max pagination: 96p tab & magazine, 32p digest & delta - Product orientation: Spine leading - Low Infeed - Infeed height (min/max in mm): ~560-970 mm - Waste gate - Stream Aligner / Jogger - Single squeeze roller - Laser Counter, model: Denex Edge Detector 2 - Upper bin height in mm: 200 mm Nwsdpfx Aboh Itrfjbop - Upper Bin with Servo Lift System - two servo lifts - Turntable with compression plates - max Stack height in mm: 300 mm - Pneumatic pusher - Servo pusher - Delivery Direction to the left - Delivery Direction to the right - Delivery height in mm: ~ 890 mm - Air Delivery Table included - Over all length equipment: 3272 mm - Over all width equipment: 1450 mm - Over all height equipment: 2056 mm - Input Power: 4,25 kW - Voltage: 400 VAC, 3Ph, N, PE - Air requirement: max 1020 Nl/min (Hannover (~1 hr), Berlin (~2 hrs) - Condition: cleaned & in working conditions

Condition: good (used), Equipment: Denex Laser Copy Sensor Nsdpfed S Su Nex Abbswp

Condition: good (used), Year of construction: 2007, Machine number: 338552-10 Built in: 2007 Size: max 320 x 470x 64 mm; min 102 x 152 x 7 mm Nsdpou R I Eujfx Abbewp Pile height pre-loading cage: 127 mm Pile height total stack: 330 mm Infeed height: 660 - 1.016 mm Speed: 15.000 c/h

Condition: good (used), Year of construction: 2003, Year of construction 2003 Size: max. 320 x 320 mm Nodpeu R Ulbsfx Abbowp min. 133 x 152 mm Pile height: Max. 330 mm Speed: max: max. 100,000 ex./h

Year of construction: 1998, condition: good (used), GAMMERLER-Compensating-Stacker, completely rebuilt, very good condition from 4 to 96 (128) pages Size: 500 mm x 330 mm Max. mechanical Speed: 80.000 sig./h Max. pile-height 300 mm respectively 400 mm Nwedjb Hxpgepfx Abbop

Year of construction: 2014, condition: good (used), Year of Construction: 2014 Description: Transforms the shingled stream behind a web press into counted and compensated stacks for further processing or distribution. No. of products per layer / stack are easily programmable. Details as shown below. - Performance/Speed: 55.000 cph (product permitting) - min format product (head/foot x spine): 102 mm x 152 mm (4.00" x 6.00") - max format product (head/foot x spine): 321 mm x 500 mm (12.63" x 19.68") - max pagination: 64p tab & magazine, 32p digest & delta - Product orientation: Spine leading - Low Infeed - Infeed height (min/max in mm): 500-1000 mm - Waste gate - Stream Aligner / Jogger - Single squeeze roller - Laser Counter, model: Scatec-2 - Upper bin height in mm: 127 mm - Upper Bin with Flipper Fingers - Turntable with compression plates - max Stack height in mm: 330 mm - Pneumatic turntable - Pneumatic pusher - Delivery Direction to the right - Delivery height in mm: 876 mm (34.50“) Nodpeh Itciefx Abbewp - Delivery Table included - Over all length equipment: 2514-2759 mm - Over all width equipment: ~700 mm - Over all height equipment: ~1800-1950 mm - Input Power: 3 kVA - Voltage: 400 V, 3 Ph, 50/60 Hz - Air requirement: 110 l/min 5.5 bar (6 cfm 80 psi) - Weight: 900 kg (2000 lb) - Equipment at warehouse Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) - Condition: cleaned & in working conditions