Used Deckel Fp 42 Nc for sale (696)

Condition: used, machine/vehicle number: 2819-0517, x-travel:300 mm y-travel:300 mm z-travel:400 (340 with Apron) mm surface area:390 x 620 / Chip tray mm turning speeds:40- 2500 U/min feed range:02 - 3600 mm/min rapid feed:4,0 m/min control:Contour 3 - 3D path Control System spindle taper:SK40 quill stroke:60 mm milling-head swivable +/-:90* spindle drive motor:2,0 kW total power requirement:1,6 / 2,0 kW weight of the machine ca.:1,3 t dimensions of the machine ca.:1,8 x 1,8 x 1,8 m Gedpfxscxxp Ts Aabjkc Deckel FP2A Universal Milling Machine - Spilndle Head can be swiveled 90 °, can be used as vertical and horizontal machining Center. - Rigid Angle Table: 620 x 390 mm (Max. Load 250 kg) - Extendible sleeves: vertically 80 mm, horizontally 60 mm - Hydralic clamping system SK40 with Pull studs DIN 2080 or DIN 69872 Seperate Power Cabin, Central Lubrication and Coolant System, Chip tray and Splash Gaurd

Condition: good (used), Year of construction: 1966, Universal milling machine cover FP2 -WKG 512- On offer here is a universal milling machine from the manufacturer Deckel, type FP2. Technical data Manufacturer: Deckel Model: FP 2 Year of manufacture: 1966 Clamping surface: 730 x 240 mm Hydr. vice jaw width: 125 mm Gsdpourk Exofx Aabekc Clamping range: up to 225 mm Collet set: 0.5 mm - 17.5 mm

Condition: used, Year of construction: 1989, Technical details: x-travel: 300 mm y-travel: 300 mm z-travel: 400 mm control: Contour 3 Bahnsteuerung spindle taper ISO: SK 40 spindle head swivable left - right: 90 ° quill travel: 60 mm range of revolution per miute: 40 - 4000 / 21 step U/min feed:: 2 - 3600 mm/min rapid traverse : 4000 mm/min Table dimensions: 620 x 390 mm clamping table: Winkeltisch mm table load: 0,45 t total power requirement: 12,5 kVA machine weight approx.: 1400 kg dimension machine xH: 1,5 x 2,1 x 2,0 m dimensions electric cabinet: 1,8 x 0,8 x 1,1 m Operation via control panel Grundig electronic with extension arm equipment: - cooling with pump - manual-control unit with steering wheel - machine illumination Machine can be demonstrated under power. * Gjdpfx Aasu Nc Twebekc

Condition: used, machine/vehicle number: 0736, x-travel:800 mm y-travel:300 mm z-travel:400 mm work table::1000 X 440 spindle turning speed range:40 - 2000 RPM/min turning speeds steps:18 feed range:10-500 mm/min feed steps:18 rapid traverse:1,50 m/min inner taper of milling spindel:SK40 Gjdscxxyhepfx Aabskc total power requirement:2,2 kW weight of the machine ca.:2 t dimensions of the machine ca.:1,57 x 1,68 x 1,85 m Deckel FP2 LB Universal Milling Machine - Spilndle Head can be swiveled left or right (90°) - Rigid Angular Table: 1000 x 440 mm - Quick lever for Rapid Feed Travese Seperate Power cabin and has a Chip tray for clean safe working Area.

Condition: used, Year of construction: 1985, Technical details: x-travel: 485 mm y-travel: 385 mm z-travel: 380 mm control: Contour 1 Bahnsteuerung spindle taper ISO: SK 40 Gjdpfxou Ndcme Aabokc spindle head swivable left - right: 90° ° quill travel: 80 mm milling head vertical adjustable: 150 ( y-Achse) mm range of revolution per miute: Spindel vertical: 50 - 2.500 / 18 step U/min feed:: X/Y/Z: 2 - 1000 steples mm/min rapid traverse : X/Y/Z: 2000 mm/min revolution per minute: horizontal: bis 1.000 U/min Table dimensions: 460 x 800 mm table load: 0,4 t total power requirement: 9,5 kVA machine weight approx.: 1900 kg dimension machine xH: 2,35 x 2,2 x 2,0 m -Equipment: - Operation via control panel Grundig elektronic with boom - Cooling with pump - machine lighting - Linear interpolation, circular polarization in XY and XZ planes - quick chuck - manual control unit *

Condition: good (used), Year of construction: 2003, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, Tool magazine is not in operation !!! Gjdpfjr H D Akox Aabjkc

Condition: like new (used), Year of construction: 2010, functionality: fully functional, Universal milling machine Deckel FP1 repowered by FPS in year of construction 2010 with 3-axis digital display Heidenhain ND 780. Like new!! Technical Data: >> Machine no. 55249/08 Year of construction 2010 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm Godswpi A Tepfx Aabjkc >> Vertical quill SK40 and horizontal quill - SK40 >> Clamping system S20x2 >> Weight approx. 700 kg Accessories and equipment: >> 3-axis digital display Heidenhain ND 780 >> Hydraulic vice >> Collets >> Tool holders >> Milling cutters >> Operating manual >> Coolant device About the machine: A Deckel FP1 universal milling machine repowered by FPS in as-new condition is being offered. The accessories include a hydraulic vice with rotary plate, collets, tool holder, and milling cutters. Mechanically and electrically tested. The Heidenhain digital display makes working easier and even more precise. Take the opportunity to inspect and test the Deckel on site under power. The machine is available immediately.

Condition: new, Year of construction: 2025, Completely refurbished machine, as new, modernized to the legally prescribed "state of the art" safety standard in accordance with the safety regulations of the employers' liability insurance associations. Switch cabinet electronics Installation of a new CE - control cabinet according to the current legal regulations of the professional associations BGVA 3 / DIN-EN 60204-1 new machine standard. Optionally complete machine in CE execution. A CE declaration of conformity is issued for the machine. With this FPS Werkzeugmaschinen GmbH acts as manufacturer. The machine fulfills the requirements of the BETRIEBS-SICHERHEITSVERORDNUNG- Betr.SichV. The year of manufacture corresponds to the date of delivery of the machine. EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control system 3-axis - FPS Active - digital display Speed 25 - 2500 rpm geometrically stepped direct gear with 18 speed steps for maximum torque / milling power Feed rate 5 to 500 mm/min, infinitely variable rapid traverse 1,2 m/min quill Extendable quill, vertical 100 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100mm Axes X/Y/Z 800/300/400 mm Table rigid angular table 1000x440mm, load 2000kg Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder Gedpfx Aaeh Sptnjbskc - etc.

Condition: like new (used), functionality: fully functional, Universal milling machine Deckel FP3 with new 3-axis FPS active digital display Heidenhain General overhaul by FPS 2015 Mint condition Technical data: >> Year of construction 1980 Machine no. 2201-5045 >> Rigid angle table >> Speed: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> rapid traverse in 3 axes >> Drive power .:2,0 / 4,0 KW >> Spindle brake >> Travel X/Y/Z: 500/300/400 mm >> Vertical milling head can be moved 200 mm on headstock >> Vertical quill and horizontal quill - SK40 extendable >> Tightening system M16 >> Weight approx. 1500 kg Accessories and equipment: >> 3 axes active digital display Heidenhain (latest version) >> Coolant device >> Central lubrication Godpfx Aaju Dm E Hsbekc To the machine : On offer is a Deckel FP3 universal milling machine in mint condition. The FP3 was overhauled by FPS in 2015 and has only been used a little since then. The machine has little crank play and all spindles can be moved easily. On this newer FP3 model, the feed is infinitely variable in three axes, and the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. An oil change has been carried out. Mechanically and electrically tested. The digital display from Heidenhain makes work easier and even more precise. Take the opportunity to inspect and try out this machine on site under power. The machine is available immediately.

Condition: new, Year of construction: 2025, General refurbished, as good as new machine, modernized to the legally prescribed safety standard "state of the art" according to the safety regulations of the employers' liability insurance associations. Switch cabinet electronics Installation of a new CE - control cabinet according to the current legal regulations of the professional associations BGVA 3 / DIN-EN 60204-1 new machine standard. Optionally complete machine in CE execution. A CE declaration of conformity is issued for the machine. With this FPS Werkzeugmaschinen GmbH acts as manufacturer. The machine fulfills the requirements of the BETRIEBS-SICHERHEITSVERORDNUNG- Betr.SichV. The year of manufacture corresponds to the date of delivery of the machine. EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control system 3-axis - FPS active - digital display Speed 50 - 2500 rpm geometrically stepped direct gear with 18 speed steps for maximum torque / milling performance Feed rate 6,3 to 630 mm/min, infinitely variable rapid traverse 1,3 m/min Quill Extendable quill, vertical 60 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100mm Axes X/Y/Z 500/400/400 mm Table Rigid angular table 800x460mm Equipment - Vertical and horizontal spindle Gkodjh R S Tcjpfx Aaboc - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder - etc.

Condition: like new (used), Year of construction: 2011, functionality: fully functional, Universal Milling Machine Deckel FP1 repowered by FPS in year of manufacture 2010 with 3-axis digital display Heidenhain ND 780. Like new!! Technical Data: >> Machine no. 2101-51084 Year of manufacture 2011 >> Fixed angle table >> Speed: 40 - 2000 rpm Gksdpfx Aowpi Dqeabjc >> Feed on 2 axes >> Drive power: 1 / 1.5 KW >> Travel range X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill - SK40 >> Clamping system S20x2 >> Weight approx. 700 kg Accessories and equipment: >> 3-axis digital display Heidenhain ND 780 >> Hydraulic vise >> Collets >> Tool holders >> Milling cutters >> Operating manual >> Coolant device About the machine: A universal milling machine Deckel FP1 repowered by FPS is being offered in like-new condition. The accessories include a hydraulic vise with rotary table, collet tool holder, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. Take the opportunity to inspect and try out the Deckel on-site under power. The machine is immediately available.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Universal milling machine Deckel FP2 repowered by FPS built in 2013 with 3-axis digital readout Heidenhain ND 780 As good as new !!! Technical data: >> Machine no. 2202-7020 FPS no. 3364 Year of construction 2013 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power .:2.2 KW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK- 40 >> Tightening system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital readout Heidenhain ND 780 >> Brake motor with immediate spindle stop >> Central lubrication Gksdjvbifgepfx Aabec >> 2 x emergency stop >> Operating instructions >> Coolant device To the machine : We offer a universal milling machine Deckel FP2 repowered by FPS in mint condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine has an electric central lubrication system. With two emergency stop switches for safety. Mechanically and electrically tested as of 2013. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out the lids under power on site. The machine is available immediately.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: R0101, travel distance X-axis: 800 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 2,000 rpm, table width: 520 mm, table length: 1,000 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Bidding obligates you to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Travel distances X-axis travel: 800 mm Y-axis travel: 300 mm Z-axis travel: 300 mm Spindle Maximum spindle speed: 2,000 rpm Gkjdsxm Scuopfx Aabsc Minimum spindle speed: 25 rpm Chuck diameter: 40 mm Work table Table width: 520 mm Table length: 1,000 mm MACHINE DETAILS Dimensions (L x W x H): 2,500 x 2,000 x 1,800 mm EQUIPMENT Collets Additional milling table (table dimensions: 700 x 240 mm) Large machine vice (jaw width: 200 mm)

Condition: good (used), functionality: fully functional, DECKEL FP1 Active milling machine Manufacturer: Deckel Type: FP1 Active Gksdpfsxnniasx Aabsc Condition: very good Control type conventional Control active HEIDENHAIN TNC X-path 300 mm Y-path 160 mm Z-path 340 mm Tool holder SK40 Speed 40-2000 rpm. Control Active HEIDENHAIN TNC Total power requirement 2 kW Machine weight approx. 0.73 t Space requirement approx. TBH 1200x1100x1600 mm

Condition: used, functionality: fully functional, x-axis travel: 400 mm y-axis travel: 220 mm z-axis travel: 400 mm Gedpjxmi Dcofx Aabskc Speed range: 40 - 2000 rpm Speed steps: 18 Internal taper: SK40 Spindle head movement automatic/manual: 190 / 200 mm Clamping surface (table): 730 x 240 mm Table longitudinal travel automatic/manual: 390 / 400 mm Table vertical travel automatic/manual: 390 / 400 mm Feed range: 8 - 400 mm/min Rapid traverse: 1200 mm/min Electronic digital display SONY Rotary table Sheet steel cabinet with 5 drawers and various machine accessories, e.g. various spare parts, tool holders, milling cutters, exchangeable table

Condition: ready for operation (used), Working travels 300x150x340mm Universal table 600x260mm Spindle taper 40 Spindle speeds 40-2000 rpm Digital read-out Misc.accessories MARCELS MASCHINEN CH Gkjdpfx Ajdr E Apjabjc

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, Universal Milling Machine Deckel FP2 with 3-Axis Digital Readout Heidenhain, infinitely variable feed, in very good condition Technical Data: >> Year of manufacture: 1978 Machine No.: 2202-10163 Gedpexghtvjfx Aabjkc >> Fixed angle table >> Spindle speeds: 25 - 2500 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 3.0 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head can be shifted 150 mm on spindle carrier >> Vertical and horizontal quill - SK40, extendable >> Drawbar system S20x2 >> Weight approx. 1400 kg Accessories and Equipment: >> 3-axis digital readout from Heidenhain >> Coolant system >> Mechanical central lubrication About the machine: Offered here is a Deckel FP2 universal milling machine in very good condition. The FP2 has very little backlash, and all spindles move smoothly. The machine runs quietly even at maximum speeds. On this newer FP2 model, the feed rate is infinitely adjustable on all three axes, and each axis is equipped with a rapid traverse. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and improves precision. You are welcome to view and test the machine under power at our facility.

Condition: used, Year of construction: 1985, functionality: fully functional, table length: 680 mm, table width: 380 mm, table height: 345 mm, For sale is a Deckel milling table, which was installed on an FP2 milling machine. Gsdpfx Aasuuh Susbekc The angle and rotation functions are fully functional, unfortunately there is no longer a crank. Signs of use on surface recognizable on pictures Dimensions: 38*68 cm Height: 25 cm

Condition: excellent (used), machine/vehicle number: 2300-0053, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, table length: 1,000 mm, table width: 520 mm, total height: 1,900 mm, total length: 1,500 mm, total width: 1,800 mm, rotational speed (max.): 200 rpm, rotational speed (min.): 40 rpm, overall weight: 1,000 kg, - Number of table slots: 6 EQUIPMENT: - Swivel table - Three-axis digital readout (Heidenhain) - New bellows Gsdpfxowdn A Ue Aabskc - New cranks

Condition: good (used), functionality: fully functional, DECKEL FP1 tool milling machine + tool cabinet with contents (tool holders and tools, see photos) Ready for use. Price €9,700 (+ VAT) Disassembly on site and transport are the responsibility of the buyer. Gksdow Hnx Iopfx Aabjc

Condition: good (used), Year of construction: 1987, Deckel FP4M tool milling machine with 3-axis Heidenhain digital readout, fixed table, SK 40 spindle taper. Accessories: various collets and milling arbors. Good, ready-to-operate condition. Can be demonstrated under power by arrangement. Gedsxmi I Ijpfx Aabskc

Condition: good (used), Offered for sale is a partially overhauled DECKEL FP1 Aktiv universal milling machine, equipped with a 3-axis Heidenhain digital readout TNC 113 and a dividing rotary table with a three-jaw chuck. Thanks to its compact design, this machine is ideal for smaller hobby workshops or garages. Manufacturer: DECKEL Gkodpfoxmggusx Aabjc Model: FP1 Machine no.: 2102-3314 - Travel X/Y/Z 300 x 160 x 340 mm - Spindle speed range 40–2000 rpm - Stepless feed in all three axes - Rapid traverse in all three axes - Vertical milling head - 100 mm adjustable vertically - Horizontal milling attachment - 3-axis Heidenhain digital readout TNC 113 - Coolant system - Dividing rotary table with a three-jaw chuck Total power requirement: 1.9 kW Machine dimensions (L x W x H): 1.30 x 1.10 x 1.60 m Weight: approx. 850 kg Price is quoted net, ex-works, loaded. Condition: Used.

Condition: excellent (used), Deckel FP 4 M in very good condition 3-axis Heidenhain Aktivdigital Travel distances: X 500 Y 400 Z 400 Spindle speeds: 50 - 2500 rpm Feed rates: 8 - 630 mm/min + rapid traverse on all axes Table: 460 x 800 mm Quill SK 40 with M16 Weight approx. 1500 kg Godpfx Aexdhprjabekc

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 360 mm, For sale is a Deckel FP1 with 3-axis active control system Gksdjr H E Uiopfx Aabec The machine is fully functional and will be checked, cleaned and put into stock in our incoming goods department. Technical data: Digital display 3-axis active digital readout HEIDENHAIN X-axis travel 300 mm Y-axis travel 160 mm Z-axis travel 340 mm Tool holder: SK 40 Milling head type. Vertical milling head Speed range: 40 - 2000 mm/rev Number of steps: 16 Feed X-axis 290 mm Y-axis feed 150 mm Feed Z-axis 330 mm Machine weight 650 kg Machine dimensions 1200 x 1100 x 1800 mm Accessories - Active function in X-, Y- and Z-axis - Coolant device The offer refers only to the machine without tools, this can be negotiated additionally On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Year of construction: 1980, machine/vehicle number: 4038, travel distance X-axis: 290 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 330 mm, mount diameter: 40 mm, table length: 600 mm, table width: 210 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 40 rpm, overall weight: 700 kg, CONDITION & NOTES: Godpfx Ajwxpxmoabekc - This is an active, path-controlled tool milling machine