Used Deep Fryers for sale (1,224)

Condition: used, Ball bearings, deep groove ball bearings Hnedpfxsb A S Dkj Anvsn -Number: 80x stock available -Price: per piece -Interior diameter: Ø 10 mm -Outer diameter: Ø 28 mm -Width: 8 mm -Weight: 0.2 kg/piece

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 308-600-1716, drilling depth: 600 mm, spindle speed (min.): 1,423 rpm, drill diameter: 65 mm, center height: 299 mm, TECHNICAL DETAILS Boring Unit Boring system: BTA + Ejector Speed steps: 8 or 16 with gear change Feed range: 0 – 500 mm/min Rapid traverse forwards/backwards: 5,000 mm/min Spindle taper: DIN 55022, size 6 Main Drive Three-phase motor: 37 kW, 1,500 rpm Frequency control: available Spindle Speeds Range I: 16/180 – 200/230 – 290/330 – 370/430 rpm Range II: 550/620 – 740/800 – 990/1,120 – 1,280/1,450 rpm Feed Drive Servo motor: 10 Nm, 3,000 rpm Ball screw: MH 50 × 10 × 14 Coolant System Total power requirement: 73 kW Coolant pump: MSDA 40-R38, SMDA 80-R46 Magnetic filter candles: MFK 400 R Liquid cooler: DKL 7 Gap tube filter: 54 572 71 104 Immersion pump: TB 405/390 Centrifuge: Polar U6 MACHINE DETAILS Dimensions and Weight Machine weight: approx. 6,000 kg Hnedswx E N Iepfx Anven Paintwork Color: RAL 6011 EQUIPMENT Clamping fixture with movable drill bushing Clamping fixture with drill bushing carrier Clamping fixture with clamping table Clamping fixture with centering tailstock Clamping fixture with centering clamp ZS2 (HICO) Force measuring system KIMISIT 0 – 30 Hydraulic unit HS04-C807-6-0 Chip conveyor SEW RF 430T71D4 Centrifuge Hanning ZG 52x6K.137 Fans Dietz DR 80a 69 Lubrication pump Vogel DM7 Control unit for main and feed drives

Condition: excellent (used), drilling depth: 10,000 mm, MGA (Romanian) Deep Hole Boring Machine Max Boring Dia: 187mm Max Boring Length: 10,000mm Chuck Diameter: 813mm Chuck Bore: 152mm Machine had a complete retrofit in 2007 to enable CNC or manual mode operation Controls: Bosh Rexroth Electric Drives Hnjdpfxsyk Tcfs Anvon Software Winstudio At the moment the machine is set to bore 3000mm length Has 5 other bed sections to increase this 12 Various Boring Tubes 30 Various Boring Heads 5 Supporting Steadies 2 Pressure Heads

Year of construction: 1981, condition: like new (used), Second hand hydraulic (triple acting) deep drawing press LAUFFER 400t. The press is already dismantled and in excellent condition as it has been little used. Technical data: Year of manufacture: 1981 Pressing capacity in t: 400 Height above floor in mm: 5940 Stroke in mm: 800 Hjdped Ntd Dsfx Anvjnn Table size (lxb) in mm: 1600 x 1300 Ram size (lxb) in mm: 1500 x 1300 Daylight in mm: 850 Upper ejector stroke in mm: 160 Upper ejector force in t: 6,3 Lower ejector stroke in mm: 200 Lower ejector force in t: 12 Total power consumption in kW: 150 Overall size (lxbxh) in mm: 3550 x 1200 x 5940 Total weight in kg: 50000

Condition: excellent (used), functionality: fully functional, drilling depth: 1,000 mm, feed length X-axis: 1,650 mm, feed length Y-axis: 1,000 mm, travel distance Z-axis: 360 mm, spindle speed (max.): 4,200 rpm, drill diameter: 40 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, spindle motor power: 10,000 W, table length: 700 mm, table width: 1,400 mm, table load: 4,000 kg, feed length W-axis: 500 mm, Selca S4040D CNC Control Drilling depth, transverse movement V axis: 1,000 mm Column, longitudinal movement X axis: 1,650 mm Drilling slide, vertical movement Y axis: 1,000 mm Drilling slide, workpiece support movement W axis: 500 mm Drilling slide, maximum vertical "swivel" - A axis: +20° / –20° Rapid traverse, adjustable speed up to 10,000 mm/min Drilling diameter in solid material min/max: 5 – 40 mm Drilling spindle, rotational speed, adjustable: 1 – 4,200 rpm Drilling spindle motor power: 10 kW Fixed clamping table, dimensions: 700 x 1,400 mm Standard clamping slots: 18 mm Hydraulic pump motor power: 7.5 kW Gun drill holder; shank for drills > 6 mm: 10 x 40 mm Gun drill holder; shank for drills < 6 mm: 25 x 70 mm Clamping table ROTARY & "BARRASENO" axis B Dimensions mm: 800 x 1,000 Standard clamping slots: 18 mm Maximum axial load (rotary): 4,000 kg Continuous rotary axis B resolution: 360,000 steps/rev Maximum vertical resolution "BARRASENO" axis B1: +20° / –20° Small milling head – threading, etc. Maximum horizontal working stroke Z axis (830): 360 mm Spindle speed, adjustable up to 2,200 rpm Hsdpfx Asxpwf Tenvenn Threading spindle motor power: 10 kW ISO40 tool changer with 10 rotary-translating stations USED MACHINE

Condition: good (used), Year of construction: 2012, Anko KUP-60 SF60 Stir fryer 2012 stainless cooking tumbler, capacity 60L, gas fired, tilting vessel, adjustable speed, temperature and timers, two direction rotation, ideal for rice, noodles, roasting seed and nuts, coating sweets, confectionery and jams etc Hedpfx Anjyhb Ttovjnn

Year of construction: 1999, condition: used, Technical details: Press area: 2350 x 1300mm Dimensions (LxWxH) approx: 4200 x 3200 x 2400mm Weight approx: 8000kg Hedpfx Anjf D Aq Aovonn Item Description: Machine number 99-0211, equipped with a sliding table 2350 x 1300mm, workpiece dimensions max. 2100 x 1100mm, workpiece thickness max. 38mm, control with touchscreen.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 106 155 - 11, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales. Hedpfxow Agqhj Anvsnn

Condition: excellent (used), Year of construction: 2012, operating hours: 79,000 h, functionality: fully functional, machine/vehicle number: 106648-11, Please provide your offer price. Sales only within Europe, including Turkey. Price excluding packaging; delivery condition: FCA (machine location). Available machines: 5 units, identical process. Year of manufacture: 2001 - 2012 ===== For technical data, please refer to the handout. Hedpfoxzgraox Anvjnn All warranty rights are excluded. We do not guarantee the accuracy of the technical data and year of manufacture, the completeness of accessories and tooling, or compliance with all safety and environmental protection requirements specified in accident prevention regulations. No sale to private individuals.

Year of construction: 2008, condition: good (used), Anko BFK-10 Automatic stir fryer Capacity 60l, gas LPG, with a scraper and stirrer to scrape liquid eggs and stir fry ingredients, automatic temp control, variable speed, automatic tip discharge, suitable for cooking fried rice, fried noodle, dried meat cracker, dried meat floss, jerky, fried ground meat, ham, dried squid, steak, coffee, peanut, powder, bean, sugar coating, tea leaf, sesame, tofu, sticky rice and more, 3Ph Hsdpfxsh N Slxj Anvenn

Condition: excellent (used), functionality: fully functional, For sale: High-performance open fryer, brand PITCO. Digital controls. Oil filtration system. Cold zone. Ability to set time and temperature for 8 products in each vat. Dimensions: 150 x 88 x 102 cm. Hnjdpfx Anouphdajven

Condition: ready for operation (used), Drilling diameter: 3-25mm, drilling depth: 1000mm, connected load: 36kW, control: EST, 99 drilling memory positions per program, grinding and coordinate programming, plain text programming via input mask. Accessories: paper band filter, coolant cooling system, 4-door control cabinet, high-pressure pump up to 150bar, oil tank, 1 steady rest for smaller diameters at large drilling depths, direction-adjustable holder for drill bushing holders, various drill bushing holders, long clamping table for 0-height, tailstock stop and base plate for machine vice freely movable on the additional table, matching precision machine vice optionally available. Speed, high pressure, Z-axis (feed), X/Y-axes, and W-axis (approach slide) programmable via control. CPU and card rack defective (fan fault), machine therefore not operational, drives and guideways were fully functional until last operation. An on-site inspection is possible. Hnjdpfxeylbrqo Anvon

Condition: used, conveyor belt width: 1,000 mm, GEA CFS Koppens inline fryer, heated by thermal oil. 3m frying length, 1000mm wide belt. Auto canopy hoist, top hold down belt. Older machine, has been in storage for a long time, previously used for frying onion bhaajis and pakora. Hnedox Av Dujpfx Anvsn

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling depth: 600 mm, rotational speed (max.): 6,000 rpm, center height: 250 mm, controller model: SIEMENS Sinumerik 840 D, workpiece diameter (max.): 25 mm, No reserve price – guaranteed sale to the highest bidder! The machine has been completely overhauled! TECHNICAL DETAILS Working depth: 600 mm Working diameter: 4 – 25 mm Number of spindles: 2 Centre height: 250 mm Centre distance: 203.2 mm Speed range: 1,000 – 6,000 rpm Feed rate: 0 – 300 mm/min Rapid traverse: 6,000 mm/min MACHINE DETAILS Control system: SIEMENS Sinumerik 840 D (Retrofit) Drilling system: Single-lip deep hole drilling Main drive: 2 x 5.5 kW EQUIPMENT - Single functions for machine setup - Semi-automatic operation for manual loading - Robust spindle carriage - Machine monitoring with spindle speed display - Table plate in special cast design - Safety guard with sliding door - Machine bed with hardened and ground linear guides Hnodexpvbtopfx Anvon - Internal coolant supply through drilling spindle - Electrical equipment according to IEC standards - Separate control cabinet with safety devices - Control panel in working area

Year of construction: 2018, condition: ready for operation (used), Two identical Göztepe belt fryers are available for vegetables (onions, potatoes, nuts, etc.). Working length: 6800mm, working width: 700mm, inlet height: 1280mm, outlet height: 1060mm, working temperature: 180°C, plastic belt length and width bottom: 14000mm/720mm, plastic belt length and width top: 8500mm/720mm. Machine dimensions X/Y/Z: approx. 6900mm/1800mm/3500mm, total output: 135kW. Documentation available. On-site inspection is possible. Hnsdpsu Tiy Njfx Anvjn

Year of construction: 2008, condition: ready for operation (used), A Geiss large-format vacuum thermoforming machine is available. Panel cutting min.: 1100mm/1300mm, max. panel cutting: 2100mm/1800mm, max. forming depth: 620mm. Additional panel format 1: min.: 850mm/750mm, max.: 1850mm/1250mm. Additional panel format 2: min.: 1050mm/800mm, max.: 2050mm/1300mm. Including a separate loading machine with pneumatic panel separating equipment, an automatic aligner for panel cuts in longitudinal and transverse direction, a pneumatic pusher for removing the molded parts from the loading unit, fully automatic central lubrication of the loading machine, several interchangeable pallets for window panel sets, a storage rack for window panels as well as a vacuum control with four independently adjustable flow stages and an air preparation system. Documentation available. On-site inspection is possible. Hnsdpfx Aowih Arenvsn

Year of construction: 2002, condition: ready for operation (used), Offered is a thermoform vacuum packaging machine / deep-drawing packaging machine from CFS. Air: 8bar / 500Nl/min, water: 2bar / 75l/min, weight approx. 2800kg. Inspection by arrangement possible. Hnedpfxsxx Ud Es Anven

Year of construction: 2021, condition: ready for operation (used), A semi-automatic vacuum skin packaging machine (tray sealer) Sealed Air for Darfresh skin packaging is available. Packaging capacity: 15/min, cycle performance: 1.5 cycles/min, film width: 562mm, max. product dimensions X/Y/Z: 670mm/470mm/50mm, tray length range: 135mm-700mm, tray width range: 120mm-520mm, tray height range: 5mm-50mm. Machine dimensions X/Y/Z: approx. 1050mm/1650mm/1250mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. Hedpfx Asxaphbonvonn

Condition: good (used), JBT M Fryer, 6m x 600mm. Fully optioned fryer. Electrically heated, Teflon infeed, sediment removal, touchscreen controls etc. The JBT M Fryer is a high-performance industrial fryer designed for large-scale food production. The M Fryer is used primarily in the food industry to fry various products such as chicken, fish, snacks, and other prepared foods. Hnsdpeud Ry Ssfx Anvon

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 6207 20.57, workpiece weight (max.): 3,000 kg, spindle speed (max.): 4,000 rpm, table length: 1,675 mm, table width: 700 mm, quill travel distance: 1,000 mm, TECHNICAL DETAILS Travel Paths and Drilling Motion Quill travel z: 1,000 mm Vertical drilling unit: 800 mm Traveling column in drilling direction w: 1,100 mm Table and Axes Table transverse travel x: 1,000 mm Table size: 1,675 x 700 mm Table load capacity: 3,000 kg Spindle and Machining Tool holder: SK40 Spindle speed: 100 to 4,000 rpm Drilling capacity in steel: 32 mm Thread cutting: M24 MACHINE DETAILS Hnjdpfx Asw Elrvsnvsn Power connection: 7.5 kW Dimensions & Weight Weight: 4.8 t Footprint: 3,500 x 6,000 x 2,400 mm Transport dimensions without enclosure: 2,400 x 6,000 x 2,400 mm

Condition: good (used), We offer contract deep-hole drilling work. From a diameter of 0.5 to 400 mm and up to a drilling depth of 12,000 mm, everything is possible! Hnodpfsrt T U Eex Anvon Please contact us and we will be happy to prepare a quotation for you. Please let us know the quantity, the material, the drilling diameter and the drilling depth.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, drilling depth: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,300 mm, rotational speed (max.): 5,600 rpm, TECHNICAL DETAILS Drilling Data Drilling depth: 1,500 mm Axis Data X-axis travel: 3,000 mm Y-axis travel: 1,200 mm Z-axis travel: 1,300 mm X-axis feed rate: 15 m/min Y-axis feed rate: 15 m/min Z-axis feed rate: 15 m/min Feed force: 30,000 N Rapid traverse speed: 15 m/min Spindle Data Speed: min. 300 rpm Speed: max. 5,600 rpm Table Data Clamping surface: 2,000 mm x 1,250 mm Number of T-slots: 7 Table load capacity: 12,000 kg Tool holder: SK50 Hedsw Izr Ajpfx Anvsnn MACHINE DETAILS Control: TNC430 Dimensions & Weight Dimensions (L x W x H): 8,400 x 8,300 x 4,500 mm Total weight: 30,000 kg EQUIPMENT Stepless speed adjustment Drill bit grinding machine Note: Dismantling and loading can be offered for €8,000.

Year of construction: 2018, condition: as good as new (ex-display), Number of spindles 1 Hnjdpod S Ualjfx Anven full drilling 5-40 mm Drilling depth 1.000 mm

Condition: excellent (used), Year of construction: 2018, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,800 mm, Table 1,500 x 1,500 mm X 2,000 mm Y 1,600 mm Z 1,800 mm B-axis, A-axis swiveling +/- 19 degrees Machine features full enclosure Hsdpfx Aexyic Sonvjnn Chip conveyor and high-pressure coolant system Tool holder SK 50 Control Heidenhain iTNC 640 Table load capacity 20 tons Spindle speeds up to 4,000 rpm Rapid traverse 20 m/min Tool changer with 40 stations

Condition: excellent (used), Year of construction: 2001, drilling depth: 700 mm, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,600 mm, spindle speed (min.): 6,000 rpm, drill diameter: 40 mm, table length: 1,500 mm, table width: 1,250 mm, table load: 10,000 kg, Year of manufacture: 2001 Control: Heidenhain TNC 430 X: 1600 mm Y: 1200 mm Z: 1600 mm W: 500 mm Table: 1500*1250 mm, 10T B-axis, A-axis swiveling +/- 19 degrees Machine features full enclosure Chip conveyor with coolant system Tool holder: SK50 Tool changer: 20 positions Hodpfxsxu Dkgo Anvenn