Used Delolux 03 S for sale (70,061)

Listing

Cardan shaft universal joint Elbe 9.990.000.0354 S/X 350/40

Wiefelstede

6,930 km

Cardan shaft universal joint
Elbe9.990.000.0354 S/X 350/40

€320

Fixed price plus VAT

Call

Year of construction: 2020, condition: good (used), Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Manufacturer: Elbe, Cardan shafts with universal joint -Type: Length S/X 350/40 Kdsdpfxsx Nf I Ee Abcei -Elbe .: 9.990.000.0354 -Flange Ø 90 mm -Bolt circle: Ø 75 x 8 mm -Quantity: 10x cardan shafts available -Price: per piece -Dimensions: Ø 90 x 400 mm -Weight: 5.1 kg/pc.

See details

Listing

Arburg 820 S 4000-3200 (2005) Arburg 820 S 4000-3200

Trenčianske Stankovce

6,198 km

Arburg 820 S 4000-3200 (2005)
Arburg820 S 4000-3200

Call

Condition: good (used), Year of construction: 2005, Arburg 820 S 4000-3200 (2005) The machine has 2x hydraulic cores and 9 hot runners. Clamping Force: 400 ton Kedpjxhdgzjfx Abcedi Screw Diameter: 90 mm Shot Weight: 1860 g Injection Volume: 2036 cm³ Injection Pressure: 1580 bar Opening Stroke: 700 mm Distance Between Tie Bars: 820 × 820 mm Mould Height Min/Max: 350 – 850 mm Opening Width: 1050 – 1550 mm Platen Size (h × v): 1171 × 1171 mm Machine Dimensions (L × W × H): 8,3 × 2,3 × 2,4 m Machine Weight: 22 500 kg Working hours : 79.000

See details

Listing

Temperature test chamber spraying device Vötsch VBT 03/500 500 Liter -30 bis 80°C

Borken

7,009 km

Temperature test chamber spraying device
VötschVBT 03/500 500 Liter -30 bis 80°C

Call

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in steady state according to IEC 60068-3-5 dependent on the test chamber temperature over time ± 1 K Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the insert grid Water level = 0 mm The water level is at the top edge of the insert grid Data for standard spray device Number of spray nozzles: 6 Spray volume per nozzle: 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles: 6 Spray volume per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray volume of additional nozzle: 6 l/min Compressed air consumption: approx. 3 m³/h Data for water tank with pre-temperature control Volume: approx. 2000 l Temperature range for pre-temperature control +5°C to +40°C Temperature change duration Cooling of +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Installation and Operation Data: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Plug-ins 1 50 mm diameter plug installed on the left Kjdpfjwc Nvgsx Abcjdi Test chamber capacity: approx. 500 liters Refrigerant R-404a Electrical connection: Nominal voltage 3/N/PE AC 400V ± 10% 50Hz Nominal power approx. 26 kW Nominal current approx. 44.0 A (neutral conductor loaded) Fuse protection 63 A gG, on-site Weight approx. 890 kg net For your safety, please note the following information! The following steps are carried out on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

See details

Submit auction

Listing

Borken

7,009 km

3D Ultrasound Schneider
FillSM - 03

€39,000

Fixed price plus VAT

Call

Condition: excellent (used), Fill 3D Ultrasound Cutter Here we offer a Fill 3D ultrasound cutting system. Kedpfjf Tph Iex Abcjdi Fill 3D-ultrasonic cutter 3D-ULTRASONIC CUTTER The 3D ultrasonic cutter from Fill enables three-dimensional contour cutting of fibre-reinforced plastics by means of ultrasonic excited cutting systems. Your advantages: Ergonomic loading and unloading Easy creation of trimming programs (NC control) Space-saving system concept (alternative to robot) High repeatability High process stability Simple and fast tool change Possible integration into an overall process chain The principle: The linear axis gantry enables precise guidance of the ultrasonic knife with low space requirements and simple kinematics. The Siemens CNC control 840 D allows the trimming device to be programmed like a machine tool. Tool corrections or path changes can easily be made directly on the machine. The machine is equipped with a 20 kHz ultrasonic cutting unit as standard. However, it can also be equipped with alternative systems. The cutter is equipped with a separate rotary axis, in order to be able to cut tight radii and save other axis movements (5 + 1 axes). Technical data: Machine data component length max. 1.000 mm component width max. 900 mm component height max. 400 mm path repeat accuracy +- 0,1 mm positioning accuracy +- 0,2 mm Load capacity approx. 30 kg E-control Siemens Sinumerik 840D

See details

Listing