Used Delolux 03 S for sale (70,211)

Year of construction: 2017, condition: used, Leafy vegetable and herb slicer, 2 units available. When purchasing the complete set (2 units), the price is 12,000 euros net, non-negotiable. Bedpfjyktdvox Aprslh

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 11,541 h, load capacity: 3,000 kg, lifting height: 5,955 mm, free lift: 1,874 mm, fuel type: electric, mast type: triplex, construction height: 2,675 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Fork width: 125 mm Fork thickness: 45 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Dual pedal Condition: Refurbished, no warranty Technical condition: Good Bledpey Ufr Ijfx Aproh Front tire type: Superelastic Front tire size: 23x9-10 Front tire condition: New Rear tire type: Superelastic Rear tire size: 200-50-10 Rear tire condition: New Battery voltage: 80V Battery Ah: 625Ah Battery manufacturer: AIM Battery type: PzS Battery year of manufacture: 2016 Battery condition: 40 - 60% Description: Handover with new FEM 4.004 inspection. If you have any further questions, please feel free to call us. In addition to this model, we have approximately 150 other forklifts in stock. Visit our website for leasing and financing options, as well as information on delivery at favorable conditions. We can also offer a trade-in for Linde equipment, even if you do not purchase a device from us. The indicated operating hours were recorded at the time of listing. Subject to prior sale, changes, and errors. Side shifter, fork positioner Durwen fork positioner with valve block side thrust 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, full free lift, safety light.

Year of construction: 1990, condition: good (used), # 1299, drill automat with magazine, 3 piece drill motors with each 2 2 spindles and 25 mm grid, milling motor for floor groove and chain drive after general repairs and new electric and new pneumatic Bodpfocm Uf Aex Aprolh

Condition: used, Year of construction: 2018, functionality: fully functional, total length: 7,120 mm, total width: 1,020 mm, total height: 800 mm, TAF article number: 1000003853 Manufacturer: S-Serv Year of construction: 2018 Overall dimensions: approx. 7,120 x 1,020 x 800 - 1,100 mm Width incl. side panel: 900 mm Side panel height: 90 mm Width incl. drive: 1,020 mm Conveyor length: 7,070 mm Conveyor width: 800 mm Belt type: PVC, smooth Belt width: 800 mm Substructure: incl. supports H: 800 to 1,100 mm Drive: Head drive Motor: Gear motor Bsdpfjr D Ntqox Aprelh Motor data: SEW, 0.12 kw, 50-60 Hz, 230-400 volts Conveying speed: 0.1 m/s, constant Special features: incl. side guide, H: 40 mm Condition: Used / fully functional Function test: OK

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO Concrete Mixers; single shaft, twin shaft and planet-type models are produced in three different models and different capacities. The durable and long-life wearing plates, reinforced mixing arms and paddles, has been projected by our engineers to suit every need and capacity. Our mixers have a significant market share both at home and abroad with the price advantage brought by mass production, short delivery time, quality manufacturing and spare part supply guarantee. Technical details:  Type: Twinshaft mixer (TWS 03)  Wet concrete capacity: 3 m3  Dimensions (length x width x height): 2300 x 4090 x 2750 mm  Feeding capacity: 4500 lt  Fresh concrete capacity: 3750 lt Blsdjzar Rmjpfx Aprjh  Compacted concrete capacity: 3000 lt  Motor power: 2 x 55 kW  Hydraulic discharge gate  Automatic lubrication FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 123713 € 2338.18 € 320 to 4050 mm Y1 / Y2 / X Achse 365 mm 3600 mm 450 mm 630 mm hydraulisch 160 mm/s 10 mm/s 140 mm/s 500 mm/s 350 mm/s 250 mm 900 mm 154 mm 250 l 18.5 kW 5250 mm 1770 mm 2850 mm 20000 kg Standard accessories: 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence Bsdpfxjwirfqs Aprjlh - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PBF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... optional equipment: R-Axis R/Z1/Z2-Axis DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) CNC Control SKY22 CNC Control Delem DA66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option

Condition: ready for operation (used), Year of construction: 2005, clamping force: 4,000 kN, overall weight: 22,500 kg, Hydraulic injection moulding machine manufactured in 2005. This Arburg SELECTA 820 S 4000 - 3200 features a clamping force of 4000 kN and an opening stroke of 700 mm. The machine has a platen size of 1171 x 1171 mm and a maximum moving platen weight of 4500 kg. If you are looking to get high-quality injection moulding capabilities, consider the Arburg SELECTA 820 S 4000 - 3200 machine we have for sale. Contact us for further details. • Quantity available: 4 • Clamping unit: • Opening force: 100 kN • Opening stroke: 700 mm • Minimum mould height: 350 mm • Maximum daylight: 1550 mm • Tie bar spacing: 820 x 820 mm • Platen size: 1171 x 1171 mm • Max. moving platen weight: 4500 kg • Ejector force: 100 kN • Ejector stroke: 250 mm • Injection unit: Blsdjy A Ny Ejpfx Aprjh • Screw diameter: 70 mm • Screw L/D ratio: 23 / 20 / 18 • Max. screw stroke: 320 mm • Shot volume: 1323 / 1608 / 2036 cm³ • Max. shot weight (PS): 1215 / 1469 / 1860 g • Injection pressure: 2500 / 2000 / 1530 bar • Injection rate: 304 / 396 / 502 cm³/s • Screw speed: 350 rpm • Screw peripheral speed: 65 / 75 / 80 m/min • Screw torque: 2247 Nm • Nozzle contact force: 110 kN • Nozzle stroke: 600 mm • Drive and power: • Hydraulic pump motor: 55 kW • Total installed power: 96.2 kW • Heating: • Cylinder heating capacity: 6 zones (5500 + 4300 W) • Nozzle heating: 1250 W • Oil tank capacity: 590 l

Condition: used, Technical details: diameter: Nr.1: ca. 6 mm diameter: Nr.1: max. 25 mm connection electric: 400 V motor: Getriebemotor / gear motor total power requirement: 0,25 kW weight of the machine approx.: ca. 120 kg Bsdpfxeu Nw Sns Aprelh space requirements approx. LxWxH: 0,85x0,6x0,1,0 m Wire Peeling Machine Application: peeling of electric wires to be processed parts: wires with PVC coat / rubber coating wire feed via angular rail 40mm on a length of 600mm infeed manual driver roller dia=80x21mm serrated copy of manual is available i.D. *

Condition: used, Year of construction: 2020, New: No Colour: Black Empty weight: 712 kg Dimensions (LxBxH): 121 x 27 x 78 cm - Year: 2020 - Documentation available: Yes - CE certificate present: No - Serial number: 302458550 - Drive: Electric - Brand/Type: Marathon 03EPZS0465 SLC - Battery year of construction: 2020 - Capacity: 465Ah - Battery voltage: 48V - Battery test result: 99% - Type: Battery - Transport dimensions: 1210mm x 275mm x 780mm (l x w x h) - Transport weight [kg]: 712kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom Bsdjza Efkepfx Aprjlh

Condition: excellent (used), Year of construction: 2011, 2x ARBURG A 170 S 180-30 Trennebene (S&P 3798) Manufacture year: 2011 Bsdpfx Apszbazpjrolh Operating hours: 38,396 Stunden Screw: 15 mm Injection pressure: 2200 bar Stroke volume: 10,6 cm³ Clamping Force: 18 t Tie bar distance: 170 x 170 mm Mould installation height min.: 150 mm Plate distance max.: 350 mm Dimensions: 2600 x 1400 x 2000 mm Eeight: 1720 kg Connected load: 11 + 4 = 15 kW price: on request Option parting line, hotrunner 6x, Robot Interface EM67, Interface Colorizing, corepuller, crane 350 kg Price: on request contact: Mr. Ralf Schulz

Condition: new, sheet width 3100 mm plate thickness 6 mm pre-bending 5 mm upper roll diameter 200 mm min. bending diameter Ø 300 mm bending speed 5 m/min total power requirement 5,5 kW weight of the machine ca. 4.000 kg Blodpsyv Nf Isfx Aprsh dimensions of the machine ca. 4800x1300x1270 mm

Year of construction: 2024, condition: new, Everything can be configured on request, very short production times and a high degree of flexibility. Bljdped Tpy Nsfx Aproh

Condition: new, Year of construction: 2024, Discover the powerful Durma press brake at our demonstration center in Saerbeck. As a manufacturer, we offer you maximum precision and efficiency with a capacity of 3050 mm in length and 320 tons. Benefit from our comprehensive all-in-one service: We take care of transportation, installation, commissioning and offer you a one-year warranty as well as fast and reliable service. Visit us and see the quality and versatility of this first-class machine for yourself. DURMA press brake AD-S 30320 Standard equipment Capacity (length X ton) 3050mm x 320t Bljdpfx Apot Dvl Usreh Installation height 630mm throat 450mm Stroke 365mm Y1, Y2, X - 3 axes Control unit - DT 15 CE Fiessler Akas manual light barrier Servo motor backgauge & linear guide & Manual crowning European style tool clamping system Sliding front arms Hydraulic block and valves in special design according to worldwide standard Electrical equipment according to worldwide standard Options: Delem 66T Motorized crowning Motorized X, R-axis backgauge X=650mm X and R Lower tool European M.460R.85 Top tool European P135.75.R08

Condition: used, Year of construction: 2008, height of stroke 2015 mm Bledjy Sum Ajpfx Aprjh 300 kg weight 280 kg

Condition: used, HEIDENHAIN rotary encoder Blodoy Sumcspfx Aproh Type: ROD 486 1024 27S12-03

Condition: new, Year of construction: 2024, Bending force: 320 t Year of construction: 2024 (new) Control system: DT 15 Bending length: 4050 mm Distance between the columns: 3600 mm Y fast Speed: 100 mm / s Y Working speed: 10 mm / s Blodpfx Apeff Hvlereh Y Retraction speed: 100 mm / s Motorized crowning Table length: 630 mm Table width: 154 mm Table height: 900 mm Stroke: 365 mm Projection: 450 mm 2 support arms 2 back gauge fingers Travel speed X-axis: 350 mm / s Travel in X-axis: 750 mm Travel speed in R-axis: (max.) 300 mm / s Travel distance R-axis: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminum) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Backgauge with motor and linear guide and ball screw thread Stop finger back gauge with height adjustment (R-axis, manual) CE die holding system (upper dies) Front support arms for sheets, sliding (with T-channel and stops) Hydraulic blocks and valves in special design, in accordance with global standards Electrical equipment, in accordance with global standards Option: CE certified Motorized crowning and X & R backgauge Engine power 37 kW Oil tank capacity 250 lt Length 5300 mm width 1910 mm Height 3230 mm Weight approx. 20000 kg

Condition: new, Year of construction: 2024, Are you looking for a powerful press brake that can meet even the most demanding requirements? Then the Durma AD-S 803000 press brake with 3000 tons of pressure could be the perfect solution for your needs. With an impressive length of 8 meters and a stroke of 750 mm, this machine is capable of processing even large and heavy materials with the highest precision. The installation height of 1000 mm allows flexible and comfortable positioning of the workpiece. The heart of the machine is the DELEM-DA 66T movable control system, which ensures intuitive operation and precise control of the workflow. In addition, the press brake is a special design and can be configured according to customer requirements to meet all individual needs. If you are interested in Durma press brake, we are at your disposal for personal consultation. Other machines are also available and can be visited. Feel free to contact us for more information and let's find a customized solution for your needs together. Control type: DELEM DA-66T Protection oil: suitable for sea transport Front safety system: FPSC (MANUEL) Sheet metal support system: sliding support arm Stroke: 750 MM Backgauge type: X=1500 X, R Overhang:1050 MM Crowning: Hydromechanical Bedsi Da Syopfx Aprelh Installation height: 1000 MM Power: 400V 50HZ Body type: Welded frame Under tool holder: DURMA Wide

Condition: new, Year of construction: 2024, Bending force: 320 t Year of construction: New (delivery time 6-8 weeks) Control: DT 15 bending length: 3050 mm distance between the columns: 2600 mm Y Fast speed: 160 mm / s Y Working speed: 10 mm / s Y Retraction speed: 140 mm / s Bodpfx Aefifg Hjprjlh Motorized crowning table length: 630 mm table width: 154 mm table height: 900 mm stroke: 365 mm Projection: 410 mm 2 support arms 2 Backgauge fingers Travel speed X-axis: 250 mm / s R-axis working speed: (max.) 140mm / s R-axis travel: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminium) Software D-BEND for 3D bending simulation and alignment Manual crowning R axis, manual Backgauge with motor, linear guide and ball screw Backgauge with height adjustment (R-axis, manual) CE-die holding system (upper dies) Front support arms for sheets, sliding (with T-channel and stops) Hydraulic blocks and valves in special design, according to the worldwide applicable standards Electrical equipment, in accordance with the standards applicable worldwide Option: CE standard with manual fussler AKAS II M -FPSC-B-C (SAFETY PLC) CNC motorized crowning Y1, Y2, X, R (4 axes) CNC motorized crowning Engine power 37 kW Oil tank capacity 250 lt length 4300 mm Width 1820 mm Height 3230 mm Weight approx. 17250 kg

Condition: new, Year of construction: 2026, neu 2026 070217 Juni 2026, Zwischenverkau Bodpfxewirz Sj Aprjlh Türkei 4800 € 500 kg 1200 mm 400 mm 550 mm 300 mm 50 mm 80 mm 0.55 kW 1400 mm 1200 mm 1550 mm 190 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control ALTERNATIVES (prices on request): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: ready for operation (used), Rexroth HCS01.1E-W0028-A-03-B-ET-EC-NN-L3-NN-FW IndraDrive Cs compact inverter MNR: R911335595 SN:7260409116208, used, in good condition, 100% functional, scope of delivery as per photos. Bljdpfx Aox Et Uxjprjh

Condition: ready for operation (used), REFU 317/03-AB01 frequency converter SN: 6000-1697-0006 - 3AC 0-4000V / 50/60Hz, used, good condition, 100% functional, scope of delivery as per photos Bodpfx Aetvcucoprelh

Condition: ready for operation (used), Heidenhain ECN 213 2048 03S17-58 rotary encoder . 364 185-03 SN:13237849 , used, normal signs of use, 100% functional, scope of delivery as per photos Bsdpotapirofx Aprslh

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: 1830108, Technical specifications: # Machining workspace: X 300 mm; Y 650 mm; Z 400 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis (A-axis), 360° indexable dividing head (resolution 0.001°) # Number of pallets: 2; Maximum table load: 400 kg # Maximum clamping/part size: Ø 575 x 830 mm; maximum weight: 360 kg # Rapid traverse rate: X/Y/Z 75/75/75 m/min; Positioning accuracy Tp: 0.008 mm # Number of spindles: 2 / spindle spacing: 300 mm # Spindle speed: 1–10,000 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2 x 32 tools / chip-to-chip time approx. 2.5 s # Tool max. Ø75 mm / length max. 275 mm / max. weight 7.5 kg Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 70 kVA / 125A Dimensions: # Installation footprint: approx. 3.9 x 3.2 x 3.1 m # Weight: approx. 10,500 kg Scope of supply: # CNC control: Fanuc 30i-Model A # Linear axis measuring system: Heidenhain linear scales # Chip conveyor: Knoll Type 550 K-1 # Oil cooling unit # High-pressure oil filtration system max. 40 bar: Knoll AE 1060 # Cooling system for spindle, guides, and switch cabinet # 2 oil lubrication units # Part present sensing (P/Y): with low-pressure air sensors # Broken tool detection: Blum Novotec Laser Light Probe # Tool support detection system in working spindle Machine condition: NOT OPERATIONAL # Magazine chain broken — REQUIRES REPLACEMENT Bodpfxjxw Ukve Aprolh

Condition: new, Sieb & Meyer 0362141EF1005 Type: 86/9 S 30110180 Frequency inverter SN: 1000367837, unused in opened original packaging, 100% fully functional, scope of delivery as per photos. Bljdpjy Nr Avsfx Aprsh

Condition: new, Siemens 3RW3024-1AB14 soft starter E-Stand 03, unused in opened original packaging, 100% functional, scope of delivery as per photos Bedpfx Aey Nr A Aeprolh