Used Demag V 70 for sale (507)

Condition: ready for operation (used), functionality: fully functional, power: 27.21 kW (37.00 HP), gearing type: mechanical, fuel type: diesel, color: yellow, overall weight: 7,500 kg, axle configuration: 4x2, number of seats: 1, Year of construction: 1970, operating hours: 2,314 h, fuel: diesel, Equipment: additional headlights, cabin, cable winch, crane, hydraulics, DEMAG mobile crane V 42 from government ownership, little used, year of manufacture 1970, engine 3-cylinder air-cooled, max reach 5.95 m, max lifting capacity 4 tons. Sale only to businesses and with exclusion of any warranty. Loading possible. Itjdpfx Ajw Ivldoansr

Year of construction: 1972, condition: ready for operation (used), Includes (1) DEMAG TC 140 crane, year of manufacture: 1972, load capacity: 50t at 3m radius, slewing angle: 360°, outreach: 5500mm, drive: pneumatic, hydraulic, electric, operating hours: 7153h. (2) Faun LK 910/483-V vehicle, operating hours: 1214h. On-site inspection is possible. Itodpfjuzx T Rjx Aaner

Condition: excellent (used), Year of construction: 2009, Sumitomo Demag IntElekt 50/370-200 / Electric Machine Year of manufacture: 2009 Injection Unit: Screw diameter: 35 mm Shot weight: 128 g Injection pressure: 1466 bar Dosage volume: 144 ccm Clamping Unit: Clamping force: 50 t Tie bar distance: 370x370 mm Platen size: 520x570 mm Ejector: electric Clamping unit: toggle lever Control: NC5 - Touchscreen Additional Equipment: Electric machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valve x 4 Control with hot runner modules Hardened injection unit - bimetallic Central lubrication The screw diameter can be changed Dimensions: Weight: 4750 kg Length/Width/Height: 4.20x1.26x1.84 m Iodpfx Aaoxz Agtonetr All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical testing at our company in Łódź. Price: On request

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,000 h, General Data Measurements width 1264 mm Measurements depth 4308 mm Measurements height 1779 mm Machine weight 4200 kg Injection Unit Screw diameter 25 mm Shot weight 46 g Heating capacity 5.7 kW Nozzle pressure 30 kN Clamping Unit Clamping force 500 kN Max open daylight 710 mm Distance between bars 370 x 370 mm Mould height min 200 mm Mould height max 410 mm Ejector stroke 90 mm Ejector force for / back 25 kN Additional Equipment Granule Dryer Handling System Conveyor Belt - 1400 mm x 400 mm Precision Scale Temperature Units - 2x HB‑Therm Itjdpox D Eccsfx Aanor This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine. Application Types Injection Moulding

Year of construction: 1993, condition: ready for operation (used), Some old injection molding machines from Arburg, Demag and Stübbe are available. 1) Arburg 470C 1300-575, year of manufacture: 1993, clamping force: 1300kN, shot weight: 270g, mold installation height min./max.: 300mm/950mm, opening stroke: 650mm, tie bar spacing: 470mm/470mm, screw diameter: 50mm, core pulls: 3. 2) Stübbe S110/345, year of manufacture: 1976, clamping force: 1000kN, shot weight: 140g, mold installation height min./max.: 180mm/480mm, opening stroke: 320mm, tie bar spacing: 360mm/355mm, screw diameter: 40mm, core pulls: 1. 3) Demag D 150/452 NC III, year of manufacture: 1990, clamping force: 1500kN, shot weight: 207g, mold installation height min./max.: 320mm/550mm, opening stroke: 430mm, tie bar spacing: 460mm/460mm, screw diameter: 45mm, core pulls: 1. 4) Demag D100-275 NC II P, year of manufacture: 1989, clamping force: 1000kN, shot weight: 130g, mold installation height min./max.: 200mm/400mm, opening stroke: 350mm, tie bar spacing: 400mm/400mm, screw diameter: 38mm, core pulls: 1. 5) Arburg Allrounder 270M 250-75, year of manufacture: 1990, clamping force: 250kN, shot weight: 25g, min. mold installation height: 225mm, opening stroke: 325mm, tie bar spacing: 270mm/270mm, screw diameter: 20mm, core pulls: 1. 6) Demag D250-730 NC III, year of manufacture: 1991, clamping force: 2500kN, shot weight: 320g, mold installation height min./max.: 310mm/710mm, opening stroke: 600mm, tie bar spacing: 560mm/560mm, screw diameter: 52mm, core pulls: 1. 7) Arburg 320 850-210, year of manufacture: 1986, clamping force: 850kN, shot weight: 108g, mold installation height min./max.: 250mm/625mm, opening stroke: 375mm, tie bar spacing: 320mm/320mm, screw diameter: 35mm, core pulls: 0. On site inspection is possible. Individual sale possible. Itodex Hz Sbspfx Aanjr

Condition: used, Year of construction: 2001, clamping force: 60 kN, displacement volume: 106 cm³, injection pressure: 2,750 bar, overall weight: 5,000 kg, screw conveyor diameter: 30 mm, electric dosing: 15 kW electrc clamping: 9,8 kW You can find all technical data on our homepage! Payment: 100% prior to delivery Manufacturer: Demag Type: Ergotech EL EXIS S 6 Condition: technisch überarbeitet CLAMPING UNIT: - Clamping force: 60 t Öffnungsweg: 350 mm Mould installation height min.: 160 mm Mould installation height max.: - Tie bar distance (h x v): 370 x 370 mm Plate dimension (h x v): - Centering (fix- movingplate): - INJECTION UNIT: - Screw diameter: 30 mm Injection weight in polystyrol: 100 g Stroke volume: 106 cm³ Einspritzdruck: 2.750 bar CONTROL: NC4 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 1 Air valves: - Hot runner control devices: - Robot interface: Euromap 12 GENERAL DATA: - Installed heating capacity: - Pump drive power: 5,5 kW Total installed power: Motor + Heizung Iedpfoh Nvnwsx Aanotr Total weight: 5.000 kg Total size L x B x H: 4,6 x 1,5 x 2,0 m

Condition: used, friction wheel, running wheel, bridge crane, hall crane, assembly crane, workplace crane -Friction wheel travel drive for: Demag crane -Wheel diameter: 270 mm -Wheel width: 90 mm -Quantity: 2 pieces available -Price: per piece -Dimensions: 390/120/H290 mm Itedpfx Aajc Nlyusnor -Weight: 38 kg/piece

Condition: good (used), Year of construction: 1997, Ref. no.: 18142 Hersteller: DEMAG Type: Ergotech pro 50-270 Year of construction: 1997 Clamping unit Clamping force: 50 ton Opening stroke: 400 mm Distance between tie bars: 355 x 355 mm Mould height min.: 210 mm Platen size (h x v): 540 x 540 mm Injection unit Screw diameter: 35 mm Injection volume: 106 cm³ Shot weight: 95 g Injection pressure: 2573 bar Measurements and weight Ijdjwm Iz Aopfx Aanjtr Dimensions: 3,65 x 1,15 x 1,18 m Machine weight: 3600-2500 kg

Year of construction: 2003, condition: ready for operation (used), Eight Arburg injection molding machines, one Engel injection molding machine, and one Demag injection molding machine are available. 1) Arburg 270M 350-90, year of manufacture: 1996, operating hours: approx. 110000h. 2) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 108000h. 3) Arburg 270M 350-90, year of manufacture: 1992, operating hours: approx. 178000h. 4) Arburg 420C 1000-250, year of manufacture: 1995, operating hours: approx. 96000h. 5) Arburg 370C 800-225, year of manufacture: 1992, operating hours: approx. 156000h. 6) Arburg 320M 500-90, year of manufacture: 1991, operating hours: approx. 94000h. 7) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 83000h. 8) Arburg 630S 2500-675, year of manufacture: 2003, operating hours: approx. 93000h. 9) Demag Viva 100-400, year of manufacture: 1999, operating hours: approx. 116000h. 10) Engel ES 500/100 HLS, year of manufacture: 1998, operating hours: approx. 103000h. On-site inspection possible. Sale of individual machines possible. Itjdpfx Aaexrf Nrsner

Condition: used, Demag Ergocontrol, 4 MB- for NC4 control system - removed from Demag ET 6 system - removed from running machine - fully functionalmanufacturer: Demag spare part no.: 7If the spare part is traded in exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Iodpfx Ajrr Ehmjanjtr Dition: gebraucht

Condition: good (used), Year of construction: 2006, Ref. no.: 18138 Hersteller: DEMAG Type: IntElect 80-370-100 NC 4 All electric Year of construction: 2006 Clamping unit Itsdpfx Ajwm Izieanor Clamping force: 80 ton Opening stroke: 850 mm Distance between tie bars: 370 X 370 mm Mould height min.: 200 mm Mould height max.: 510 mm Platen size (h x v): 600 x 600 mm Injection unit Screw diameter: 22 mm Injection volume: 37 cm³ Shot weight: 32 g Injection pressure: 2580 bar Measurements and weight Dimensions: 4,50 X 1,28 X 1,95 m Machine weight: 4750 kg

Condition: used, Electric motor, three-phase motor Itjdpfx Aaodff Nbenor -Power: 0.37 kW -Speed: 705 rpm -Shaft diameter: 24 mm -Construction: B5 -Protection class: IP 54 -Price: per piece -Number: 5x available -Dimensions: 290/170/H205 mm -Weight: 13 kg

Year of construction: 2007, condition: good (used), functionality: fully functional, machine/vehicle number: 12428 B500-851, Overheadcrane ± 14.170 mm x 25.000 kg Itodpfxsv Ip Afe Aanjr

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, Demag Systec 100/420-310 (2015) Panel: NC5 Clamping force: 100 t Screw diameter: 30 mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Isdox H Avuepfx Aanjtr Possible to buy Wittmann W818 Linear robot Z= 1500mm

Condition: good (used), Year of construction: 2001, functionality: fully functional, clamping force: 800 kN, screw diameter: 30 mm, For sale is an injection molding machine of the brand Demag, type 80/420-200 System The machine is in good and functional condition ATTENTION: No backup disks available Technical data: Year of manufacture: 2001 Iedponfu I Isfx Aanjtr Clamping force: 800 kN Tie bar distance V: 420 mm Tie bar distance H: 420 mm Plate size H: 590 mm Plate size V: 600 mm Minimum installation height: 250 mm Maximum plate distance: 700 mm Opening stroke: 450 mm Ejector stroke: 150 mm Ejector force: 41 kN Tool weight: 700 kg Screw diameter: 30 mm Dimensions: approx. 4.5*1.50*2 m Weight: 4t Transport and loading can be organized Europe-wide at extra cost on request. Prices plus VAT Inspection possible by appointment. Contact us, our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: used, Year of construction: 1990, Lifting capacity 2,5 t weight of the machine ca. 80 kg +++++ Please note: Itjdsd N Suxjpfx Aanor The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 2004, This Sumitomo DEMAG injection moulding machine "Ergotech concept 200/560-840" is being offered in our online industrial auction / machinery auction for warehouse clearance of injection moulding machines. Itodpfjx Hvt Hjx Aanjr You can find this and many other listings on our platform.

Condition: good (used), Column jib crane, overhead crane, workstation crane -Manufacturer: DEMAG, Column jib crane, lifting capacity 250 kg -Base plate: 550 x 550 mm Ijdpfx Aaslb Iv Tenjtr -Protrusion: 2,860 mm -Total height: 5110 mm -Hook height: 3170 mm -Swivel range: 270° -Chain hoist: can be supplied for an additional charge -Transport dimensions: 5110/800/H550 mm -Weight: 380 kg

Condition: excellent (used), For sale: professional pneumatic turbine GTV 1000 from the renowned brand Mannesmann Demag – original, fully functional, and in excellent condition. - Technical specifications: • Rotational speed: 100,000 rpm • Power supply: compressed air (approx. 6 bar) Itodpfxjw Rd I Es Aansr • Air consumption: approx. 318 l/min • Spindle diameter: 30 mm • Total length: approx. 120 mm • Weight: only 210 g • Collet: 3 mm • Oil-free version – clean operation without lubrication - Why choose this? • Extremely lightweight and compact – ideal for continuous operation • German quality – precise bearings, no vibration • Perfect for deburring, micro-milling, and robotics applications • Oil-free – cleaner operation and reduced material wear

Condition: ready for operation (used), Year of construction: 2006, General Data Measurements width 2400 mm Measurements depth 7800 mm Measurements height 2200 mm Machine weight 20000 kg Main Drive Distance between bars 810x710 mm Injection Unit Screw diameter 70 mm Shot weight 1090 g/PS Stroke volume 1212 cm³ Injection pressure 1877 bar Clamping Unit Clamping force 4200 kN Distance between bars 800x710 mm Size of mold platens 1200x1100 mm Itedpfjx D Hrrex Aaner This DEMAG Concept 420/810-2300 Injection moulding machine was manufactured in the year 2006 in Germany. It is equipped with a Ergo control unit. The machine has a screw diameter of 60 mm, a stroke volume of 891 cm³, a injection pressure of 2420 bar, a shot weight of 800 g/PS and clamping force of 4200 kN. The distance between bars are 800x710 mm and the size of mould platens 1200x1100 mm. Application Types Injection Moulding

Condition: used, Year of construction: 2005, This Sumitomo DEMAG injection moulding machine "System 200/560-320" is being offered for online auction as part of our industrial auction / warehouse clearance for injection moulding machines. Iodpfxex Hvtts Aanotr

Condition: excellent (used), Year of construction: 2020, Pillar jib crane, indoor crane, workstation crane -Manufacturer: Demag, pillar jib crane load capacity 125 kg -Base plate: 350 x 350 mm -Thrust: 2,000 mm -Total height: 1,780 mm -Hook height: 840 mm -Chain hoist: DEMAG type DC-Com 1 125 1/1 H4 V8/2 -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Transport dimensions: 540/2100/H500 mm Isdpexmi R Aofx Aanotr -Own weight: 176 kg

Condition: ready for operation (used), Year of construction: 2018, operating hours: 24,004 h, clamping force: 2,000 kN, screw diameter: 40 mm, total height: 2,280 mm, overall weight: 9,400 kg, product length (max.): 6,610 mm, General Data Machine weight 9400 kg Measurements height 2280 mm Clamping Unit Clamping force 2000 kN Injection Unit Screw diameter 40 mm Dimensions Machine Length 6610 mm This DEMAG El-Exis SP 200/560-675 was manufactured in 2018. It features a screw diameter of 40 mm, a maximum dosing volume of 255 ccm, and a clamp force of 2000 KN. The tie bar distance is 560 mm, and it has a total weight of 9,400 kg. Consider the opportunity to buy this DEMAG El-Exis SP 200/560-675 electrical injection moulding machine. Contact us for more information about this machine. Application Types Isdsx H Uzcopfx Aanetr Injection Moulding

Condition: ready for operation (used), Year of construction: 2019, operating hours: 19,884 h, General Data Machine weight 27000 kg Measurements height 278 mm Dimensions Machine Length 890 mm Iedpjx H U Ehsfx Aanjtr Injection Unit Screw diameter 60 mm Clamping Unit Clamping force 3500 kN This DEMAG El-Exis SP 350/820-2500 was manufactured in 2019. A robust electrical injection moulding machine, it features a screw diameter of 60 mm, a clamping force of 3500 KN, and a tie bar distance of 820 mm. With dimensions of 8.90 x 2.21 x 2.78 meters and a weight of 27,000 kg, consider the opportunity to buy this DEMAG El-Exis SP 350/820-2500 electrical injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2018, operating hours: 28,076 h, General Data Machine weight 27000 kg Measurements height 2780 mm Itodpfxjx H U Ens Aaner Clamping Unit Clamping force 4200 kN Injection Unit Screw diameter 60 mm Dimensions Machine Length 8900 mm This DEMAG El-Exis SP 420/820-2500 was manufactured in 2018. A robust electrical injection moulding machine, it features a screw diameter of 60 mm, a maximum dosing volume of 891 ccm, and a clamp force of 4200 KN. The tie bar distance is 820 mm. If you are looking to get high-quality moulding capabilities consider the DEMAG El-Exis SP 420/820-2500 machine we have for tact us for more information. Application Types Injection Moulding